diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8378_rdb.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8378_rdb.dts | 94 |
1 files changed, 47 insertions, 47 deletions
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 03831a1d1cdd..92711534b179 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -30,7 +30,7 @@ PowerPC,8378@0 { device_type = "cpu"; - reg = <0>; + reg = <0x0>; d-cache-line-size = <32>; i-cache-line-size = <32>; d-cache-size = <32768>; @@ -51,22 +51,22 @@ #size-cells = <1>; compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; reg = <0xe0005000 0x1000>; - interrupts = <77 8>; + interrupts = <77 0x8>; interrupt-parent = <&ipic>; // CS0 and CS1 are swapped when // booting from nand, but the // addresses are the same. - ranges = <0 0 0xfe000000 0x00800000 - 1 0 0xe0600000 0x00008000 - 2 0 0xf0000000 0x00020000 - 3 0 0xfa000000 0x00008000>; + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; - reg = <0 0 0x800000>; + reg = <0x0 0x0 0x800000>; bank-width = <2>; device-width = <1>; }; @@ -76,7 +76,7 @@ #size-cells = <1>; compatible = "fsl,mpc8378-fcm-nand", "fsl,elbc-fcm-nand"; - reg = <1 0 0x8000>; + reg = <0x1 0x0 0x8000>; u-boot@0 { reg = <0x0 0x100000>; @@ -97,7 +97,7 @@ #size-cells = <1>; device_type = "soc"; compatible = "simple-bus"; - ranges = <0 0xe0000000 0x00100000>; + ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; @@ -113,8 +113,8 @@ cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <14 8>; - interrupt-parent = < &ipic >; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; rtc@68 { device_type = "rtc"; @@ -129,8 +129,8 @@ cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <15 8>; - interrupt-parent = < &ipic >; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; @@ -138,8 +138,8 @@ cell-index = <0>; compatible = "fsl,spi"; reg = <0x7000 0x1000>; - interrupts = <16 8>; - interrupt-parent = < &ipic >; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; mode = "cpu"; }; @@ -149,8 +149,8 @@ reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <38 8>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; phy_type = "utmi"; }; @@ -160,15 +160,15 @@ compatible = "fsl,gianfar-mdio"; reg = <0x24520 0x20>; phy2: ethernet-phy@2 { - interrupt-parent = < &ipic >; - interrupts = <17 8>; - reg = <2>; + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { - interrupt-parent = < &ipic >; - interrupts = <18 8>; - reg = <3>; + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -180,10 +180,10 @@ compatible = "gianfar"; reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 8 33 8 34 8>; + interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; - interrupt-parent = < &ipic >; - phy-handle = < &phy2 >; + interrupt-parent = <&ipic>; + phy-handle = <&phy2>; }; enet1: ethernet@25000 { @@ -193,10 +193,10 @@ compatible = "gianfar"; reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 8 36 8 37 8>; + interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; - interrupt-parent = < &ipic >; - phy-handle = < &phy3 >; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; }; serial0: serial@4500 { @@ -205,8 +205,8 @@ compatible = "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; serial1: serial@4600 { @@ -215,8 +215,8 @@ compatible = "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <10 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; crypto@30000 { @@ -224,8 +224,8 @@ device_type = "crypto"; compatible = "talitos"; reg = <0x30000 0x10000>; - interrupts = <11 8>; - interrupt-parent = < &ipic >; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; /* Rev. 3.0 geometry */ num-channels = <4>; channel-fifo-len = <24>; @@ -254,23 +254,23 @@ /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ /* IDSEL AD14 IRQ6 inta */ - 0x7000 0 0 1 &ipic 22 8 + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ - 0x7800 0 0 1 &ipic 21 8 - 0x7800 0 0 2 &ipic 22 8 - 0x7800 0 0 4 &ipic 23 8 + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ - 0xE000 0 0 1 &ipic 23 8 - 0xE000 0 0 2 &ipic 21 8 - 0xE000 0 0 3 &ipic 22 8>; - interrupt-parent = < &ipic >; - interrupts = <66 8>; + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; bus-range = <0 0>; - ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 - 0x42000000 0 0x80000000 0x80000000 0 0x10000000 - 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; |