summaryrefslogtreecommitdiff
path: root/arch/powerpc/include/asm/io.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/include/asm/io.h')
-rw-r--r--arch/powerpc/include/asm/io.h787
1 files changed, 787 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
new file mode 100644
index 000000000000..77c7fa025e65
--- /dev/null
+++ b/arch/powerpc/include/asm/io.h
@@ -0,0 +1,787 @@
+#ifndef _ASM_POWERPC_IO_H
+#define _ASM_POWERPC_IO_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Check of existence of legacy devices */
+extern int check_legacy_ioport(unsigned long base_port);
+#define I8042_DATA_REG 0x60
+#define FDC_BASE 0x3f0
+/* only relevant for PReP */
+#define _PIDXR 0x279
+#define _PNPWRP 0xa79
+#define PNPBIOS_BASE 0xf000
+
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/byteorder.h>
+#include <asm/synch.h>
+#include <asm/delay.h>
+#include <asm/mmu.h>
+
+#include <asm-generic/iomap.h>
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+
+#define SIO_CONFIG_RA 0x398
+#define SIO_CONFIG_RD 0x399
+
+#define SLOW_DOWN_IO
+
+/* 32 bits uses slightly different variables for the various IO
+ * bases. Most of this file only uses _IO_BASE though which we
+ * define properly based on the platform
+ */
+#ifndef CONFIG_PCI
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+#elif defined(CONFIG_PPC32)
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define _IO_BASE pci_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#define PCI_DRAM_OFFSET 0
+#endif
+
+extern unsigned long isa_io_base;
+extern unsigned long pci_io_base;
+extern unsigned long pci_dram_offset;
+
+extern resource_size_t isa_mem_base;
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
+#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
+#endif
+
+/*
+ *
+ * Low level MMIO accessors
+ *
+ * This provides the non-bus specific accessors to MMIO. Those are PowerPC
+ * specific and thus shouldn't be used in generic code. The accessors
+ * provided here are:
+ *
+ * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
+ * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
+ * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
+ *
+ * Those operate directly on a kernel virtual address. Note that the prototype
+ * for the out_* accessors has the arguments in opposite order from the usual
+ * linux PCI accessors. Unlike those, they take the address first and the value
+ * next.
+ *
+ * Note: I might drop the _ns suffix on the stream operations soon as it is
+ * simply normal for stream operations to not swap in the first place.
+ *
+ */
+
+#ifdef CONFIG_PPC64
+#define IO_SET_SYNC_FLAG() do { local_paca->io_sync = 1; } while(0)
+#else
+#define IO_SET_SYNC_FLAG()
+#endif
+
+/* gcc 4.0 and older doesn't have 'Z' constraint */
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
+#define DEF_MMIO_IN_LE(name, size, insn) \
+static inline u##size name(const volatile u##size __iomem *addr) \
+{ \
+ u##size ret; \
+ __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \
+ : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \
+ return ret; \
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) \
+static inline void name(volatile u##size __iomem *addr, u##size val) \
+{ \
+ __asm__ __volatile__("sync;"#insn" %1,0,%2" \
+ : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
+}
+#else /* newer gcc */
+#define DEF_MMIO_IN_LE(name, size, insn) \
+static inline u##size name(const volatile u##size __iomem *addr) \
+{ \
+ u##size ret; \
+ __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \
+ : "=r" (ret) : "Z" (*addr) : "memory"); \
+ return ret; \
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) \
+static inline void name(volatile u##size __iomem *addr, u##size val) \
+{ \
+ __asm__ __volatile__("sync;"#insn" %1,%y0" \
+ : "=Z" (*addr) : "r" (val) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
+}
+#endif
+
+#define DEF_MMIO_IN_BE(name, size, insn) \
+static inline u##size name(const volatile u##size __iomem *addr) \
+{ \
+ u##size ret; \
+ __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
+ : "=r" (ret) : "m" (*addr) : "memory"); \
+ return ret; \
+}
+
+#define DEF_MMIO_OUT_BE(name, size, insn) \
+static inline void name(volatile u##size __iomem *addr, u##size val) \
+{ \
+ __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \
+ : "=m" (*addr) : "r" (val) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
+}
+
+
+DEF_MMIO_IN_BE(in_8, 8, lbz);
+DEF_MMIO_IN_BE(in_be16, 16, lhz);
+DEF_MMIO_IN_BE(in_be32, 32, lwz);
+DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
+DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
+
+DEF_MMIO_OUT_BE(out_8, 8, stb);
+DEF_MMIO_OUT_BE(out_be16, 16, sth);
+DEF_MMIO_OUT_BE(out_be32, 32, stw);
+DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
+DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
+
+#ifdef __powerpc64__
+DEF_MMIO_OUT_BE(out_be64, 64, std);
+DEF_MMIO_IN_BE(in_be64, 64, ld);
+
+/* There is no asm instructions for 64 bits reverse loads and stores */
+static inline u64 in_le64(const volatile u64 __iomem *addr)
+{
+ return swab64(in_be64(addr));
+}
+
+static inline void out_le64(volatile u64 __iomem *addr, u64 val)
+{
+ out_be64(addr, swab64(val));
+}
+#endif /* __powerpc64__ */
+
+/*
+ * Low level IO stream instructions are defined out of line for now
+ */
+extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
+extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
+extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
+extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
+extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
+extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
+
+/* The _ns naming is historical and will be removed. For now, just #define
+ * the non _ns equivalent names
+ */
+#define _insw _insw_ns
+#define _insl _insl_ns
+#define _outsw _outsw_ns
+#define _outsl _outsl_ns
+
+
+/*
+ * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
+ */
+
+extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
+extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
+ unsigned long n);
+extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
+ unsigned long n);
+
+/*
+ *
+ * PCI and standard ISA accessors
+ *
+ * Those are globally defined linux accessors for devices on PCI or ISA
+ * busses. They follow the Linux defined semantics. The current implementation
+ * for PowerPC is as close as possible to the x86 version of these, and thus
+ * provides fairly heavy weight barriers for the non-raw versions
+ *
+ * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
+ * allowing the platform to provide its own implementation of some or all
+ * of the accessors.
+ */
+
+/*
+ * Include the EEH definitions when EEH is enabled only so they don't get
+ * in the way when building for 32 bits
+ */
+#ifdef CONFIG_EEH
+#include <asm/eeh.h>
+#endif
+
+/* Shortcut to the MMIO argument pointer */
+#define PCI_IO_ADDR volatile void __iomem *
+
+/* Indirect IO address tokens:
+ *
+ * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
+ * on all IOs. (Note that this is all 64 bits only for now)
+ *
+ * To help platforms who may need to differenciate MMIO addresses in
+ * their hooks, a bitfield is reserved for use by the platform near the
+ * top of MMIO addresses (not PIO, those have to cope the hard way).
+ *
+ * This bit field is 12 bits and is at the top of the IO virtual
+ * addresses PCI_IO_INDIRECT_TOKEN_MASK.
+ *
+ * The kernel virtual space is thus:
+ *
+ * 0xD000000000000000 : vmalloc
+ * 0xD000080000000000 : PCI PHB IO space
+ * 0xD000080080000000 : ioremap
+ * 0xD0000fffffffffff : end of ioremap region
+ *
+ * Since the top 4 bits are reserved as the region ID, we use thus
+ * the next 12 bits and keep 4 bits available for the future if the
+ * virtual address space is ever to be extended.
+ *
+ * The direct IO mapping operations will then mask off those bits
+ * before doing the actual access, though that only happen when
+ * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
+ * mechanism
+ */
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul
+#define PCI_IO_IND_TOKEN_SHIFT 48
+#define PCI_FIX_ADDR(addr) \
+ ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
+#define PCI_GET_ADDR_TOKEN(addr) \
+ (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \
+ PCI_IO_IND_TOKEN_SHIFT)
+#define PCI_SET_ADDR_TOKEN(addr, token) \
+do { \
+ unsigned long __a = (unsigned long)(addr); \
+ __a &= ~PCI_IO_IND_TOKEN_MASK; \
+ __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \
+ (addr) = (void __iomem *)__a; \
+} while(0)
+#else
+#define PCI_FIX_ADDR(addr) (addr)
+#endif
+
+
+/*
+ * Non ordered and non-swapping "raw" accessors
+ */
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+ *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+ *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+ *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
+}
+
+#ifdef __powerpc64__
+static inline unsigned long __raw_readq(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
+{
+ *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
+}
+#endif /* __powerpc64__ */
+
+/*
+ *
+ * PCI PIO and MMIO accessors.
+ *
+ *
+ * On 32 bits, PIO operations have a recovery mechanism in case they trigger
+ * machine checks (which they occasionally do when probing non existing
+ * IO ports on some platforms, like PowerMac and 8xx).
+ * I always found it to be of dubious reliability and I am tempted to get
+ * rid of it one of these days. So if you think it's important to keep it,
+ * please voice up asap. We never had it for 64 bits and I do not intend
+ * to port it over
+ */
+
+#ifdef CONFIG_PPC32
+
+#define __do_in_asm(name, op) \
+static inline unsigned int name(unsigned int port) \
+{ \
+ unsigned int x; \
+ __asm__ __volatile__( \
+ "sync\n" \
+ "0:" op " %0,0,%1\n" \
+ "1: twi 0,%0,0\n" \
+ "2: isync\n" \
+ "3: nop\n" \
+ "4:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "5: li %0,-1\n" \
+ " b 4b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 0b,5b\n" \
+ " .long 1b,5b\n" \
+ " .long 2b,5b\n" \
+ " .long 3b,5b\n" \
+ ".previous" \
+ : "=&r" (x) \
+ : "r" (port + _IO_BASE) \
+ : "memory"); \
+ return x; \
+}
+
+#define __do_out_asm(name, op) \
+static inline void name(unsigned int val, unsigned int port) \
+{ \
+ __asm__ __volatile__( \
+ "sync\n" \
+ "0:" op " %0,0,%1\n" \
+ "1: sync\n" \
+ "2:\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 0b,2b\n" \
+ " .long 1b,2b\n" \
+ ".previous" \
+ : : "r" (val), "r" (port + _IO_BASE) \
+ : "memory"); \
+}
+
+__do_in_asm(_rec_inb, "lbzx")
+__do_in_asm(_rec_inw, "lhbrx")
+__do_in_asm(_rec_inl, "lwbrx")
+__do_out_asm(_rec_outb, "stbx")
+__do_out_asm(_rec_outw, "sthbrx")
+__do_out_asm(_rec_outl, "stwbrx")
+
+#endif /* CONFIG_PPC32 */
+
+/* The "__do_*" operations below provide the actual "base" implementation
+ * for each of the defined acccessor. Some of them use the out_* functions
+ * directly, some of them still use EEH, though we might change that in the
+ * future. Those macros below provide the necessary argument swapping and
+ * handling of the IO base for PIO.
+ *
+ * They are themselves used by the macros that define the actual accessors
+ * and can be used by the hooks if any.
+ *
+ * Note that PIO operations are always defined in terms of their corresonding
+ * MMIO operations. That allows platforms like iSeries who want to modify the
+ * behaviour of both to only hook on the MMIO version and get both. It's also
+ * possible to hook directly at the toplevel PIO operation if they have to
+ * be handled differently
+ */
+#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val)
+#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val)
+#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val)
+#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val)
+#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
+#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
+#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
+
+#ifdef CONFIG_EEH
+#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr))
+#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr))
+#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr))
+#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr))
+#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr))
+#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr))
+#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr))
+#else /* CONFIG_EEH */
+#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr))
+#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr))
+#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr))
+#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr))
+#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr))
+#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr))
+#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr))
+#endif /* !defined(CONFIG_EEH) */
+
+#ifdef CONFIG_PPC32
+#define __do_outb(val, port) _rec_outb(val, port)
+#define __do_outw(val, port) _rec_outw(val, port)
+#define __do_outl(val, port) _rec_outl(val, port)
+#define __do_inb(port) _rec_inb(port)
+#define __do_inw(port) _rec_inw(port)
+#define __do_inl(port) _rec_inl(port)
+#else /* CONFIG_PPC32 */
+#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
+#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port);
+#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port);
+#endif /* !CONFIG_PPC32 */
+
+#ifdef CONFIG_EEH
+#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
+#else /* CONFIG_EEH */
+#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n))
+#endif /* !CONFIG_EEH */
+#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n))
+#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n))
+#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n))
+
+#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+
+#define __do_memset_io(addr, c, n) \
+ _memset_io(PCI_FIX_ADDR(addr), c, n)
+#define __do_memcpy_toio(dst, src, n) \
+ _memcpy_toio(PCI_FIX_ADDR(dst), src, n)
+
+#ifdef CONFIG_EEH
+#define __do_memcpy_fromio(dst, src, n) \
+ eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
+#else /* CONFIG_EEH */
+#define __do_memcpy_fromio(dst, src, n) \
+ _memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
+#endif /* !CONFIG_EEH */
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+#define DEF_PCI_HOOK(x) x
+#else
+#define DEF_PCI_HOOK(x) NULL
+#endif
+
+/* Structure containing all the hooks */
+extern struct ppc_pci_io {
+
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at;
+#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at;
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+} ppc_pci_io;
+
+/* The inline wrappers */
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
+static inline ret name at \
+{ \
+ if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
+ return ppc_pci_io.name al; \
+ return __do_##name al; \
+}
+
+#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
+static inline void name at \
+{ \
+ if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
+ ppc_pci_io.name al; \
+ else \
+ __do_##name al; \
+}
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+/* Some drivers check for the presence of readq & writeq with
+ * a #ifdef, so we make them happy here.
+ */
+#ifdef __powerpc64__
+#define readq readq
+#define writeq writeq
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+/*
+ * We don't do relaxed operations yet, at least not with this semantic
+ */
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+
+#ifdef CONFIG_PPC32
+#define mmiowb()
+#else
+/*
+ * Enforce synchronisation of stores vs. spin_unlock
+ * (this does it explicitly, though our implementation of spin_unlock
+ * does it implicitely too)
+ */
+static inline void mmiowb(void)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)"
+ : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync))
+ : "memory");
+}
+#endif /* !CONFIG_PPC32 */
+
+static inline void iosync(void)
+{
+ __asm__ __volatile__ ("sync" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O.
+ * No distinction between read/write on PPC; use eieio for all three.
+ * Those are fairly week though. They don't provide a barrier between
+ * MMIO and cacheable storage nor do they provide a barrier vs. locks,
+ * they only provide barriers between 2 __raw MMIO operations and
+ * possibly break write combining.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r() eieio()
+#define iobarrier_w() eieio()
+
+
+/*
+ * output pause versions need a delay at least for the
+ * w83c105 ide controller in a p610.
+ */
+#define inb_p(port) inb(port)
+#define outb_p(val, port) (udelay(1), outb((val), (port)))
+#define inw_p(port) inw(port)
+#define outw_p(val, port) (udelay(1), outw((val), (port)))
+#define inl_p(port) inl(port)
+#define outl_p(val, port) (udelay(1), outl((val), (port)))
+
+
+#define IO_SPACE_LIMIT ~(0UL)
+
+
+/**
+ * ioremap - map bus memory into CPU space
+ * @address: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * We provide a few variations of it:
+ *
+ * * ioremap is the standard one and provides non-cacheable guarded mappings
+ * and can be hooked by the platform via ppc_md
+ *
+ * * ioremap_flags allows to specify the page flags as an argument and can
+ * also be hooked by the platform via ppc_md. ioremap_prot is the exact
+ * same thing as ioremap_flags.
+ *
+ * * ioremap_nocache is identical to ioremap
+ *
+ * * iounmap undoes such a mapping and can be hooked
+ *
+ * * __ioremap_at (and the pending __iounmap_at) are low level functions to
+ * create hand-made mappings for use only by the PCI code and cannot
+ * currently be hooked. Must be page aligned.
+ *
+ * * __ioremap is the low level implementation used by ioremap and
+ * ioremap_flags and cannot be hooked (but can be used by a hook on one
+ * of the previous ones)
+ *
+ * * __iounmap, is the low level implementation used by iounmap and cannot
+ * be hooked (but can be used by a hook on iounmap)
+ *
+ */
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
+ unsigned long flags);
+#define ioremap_nocache(addr, size) ioremap((addr), (size))
+#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot))
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
+ unsigned long flags);
+extern void __iounmap(volatile void __iomem *addr);
+
+extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
+ unsigned long size, unsigned long flags);
+extern void __iounmap_at(void *ea, unsigned long size);
+
+/*
+ * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
+ * which needs some additional definitions here. They basically allow PIO
+ * space overall to be 1GB. This will work as long as we never try to use
+ * iomap to map MMIO below 1GB which should be fine on ppc64
+ */
+#define HAVE_ARCH_PIO_SIZE 1
+#define PIO_OFFSET 0x00000000UL
+#define PIO_MASK (FULL_IO_SIZE - 1)
+#define PIO_RESERVED (FULL_IO_SIZE)
+
+#define mmio_read16be(addr) readw_be(addr)
+#define mmio_read32be(addr) readl_be(addr)
+#define mmio_write16be(val, addr) writew_be(val, addr)
+#define mmio_write32be(val, addr) writel_be(val, addr)
+#define mmio_insb(addr, dst, count) readsb(addr, dst, count)
+#define mmio_insw(addr, dst, count) readsw(addr, dst, count)
+#define mmio_insl(addr, dst, count) readsl(addr, dst, count)
+#define mmio_outsb(addr, src, count) writesb(addr, src, count)
+#define mmio_outsw(addr, src, count) writesw(addr, src, count)
+#define mmio_outsl(addr, src, count) writesl(addr, src, count)
+
+/**
+ * virt_to_phys - map virtual addresses to physical
+ * @address: address to remap
+ *
+ * The returned physical address is the physical (CPU) mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses directly mapped or allocated via kmalloc.
+ *
+ * This function does not give bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+ return __pa((unsigned long)address);
+}
+
+/**
+ * phys_to_virt - map physical address to virtual
+ * @address: address to remap
+ *
+ * The returned virtual address is a current CPU mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses that have a kernel mapping
+ *
+ * This function does not handle bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+ return (void *)__va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+
+/* We do NOT want virtual merging, it would put too much pressure on
+ * our iommu allocator. Instead, we want drivers to be smart enough
+ * to coalesce sglists that happen to have been mapped in a contiguous
+ * way by the iommu
+ */
+#define BIO_VMERGE_BOUNDARY 0
+
+/*
+ * 32 bits still uses virt_to_bus() for it's implementation of DMA
+ * mappings se we have to keep it defined here. We also have some old
+ * drivers (shame shame shame) that use bus_to_virt() and haven't been
+ * fixed yet so I need to define it here.
+ */
+#ifdef CONFIG_PPC32
+
+static inline unsigned long virt_to_bus(volatile void * address)
+{
+ if (address == NULL)
+ return 0;
+ return __pa(address) + PCI_DRAM_OFFSET;
+}
+
+static inline void * bus_to_virt(unsigned long address)
+{
+ if (address == 0)
+ return NULL;
+ return __va(address - PCI_DRAM_OFFSET);
+}
+
+#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
+
+#endif /* CONFIG_PPC32 */
+
+/* access ports */
+#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
+#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
+
+#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
+#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
+
+#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v))
+#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
+
+/* Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single read-modify-write. These
+ * macros can also be used to set a multiple-bit bit pattern using a mask,
+ * by specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrsetbits(type, addr, clear, set) \
+ out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#ifdef __powerpc64__
+#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
+#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
+#endif
+
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
+void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
+ size_t size, unsigned long flags);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_IO_H */