diff options
Diffstat (limited to 'arch/powerpc/platforms/embedded6xx/holly.c')
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/holly.c | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c new file mode 100644 index 000000000000..3a0b4a01401c --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/holly.c @@ -0,0 +1,317 @@ +/* + * Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge + * + * Copyright 2007 IBM Corporation + * + * Stephen Winiecki <stevewin@us.ibm.com> + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Based on code from mpc7448_hpc2.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/ide.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/tsi108.h> +#include <asm/pci-bridge.h> +#include <asm/reg.h> +#include <mm/mmu_decl.h> +#include <asm/tsi108_irq.h> +#include <asm/tsi108_pci.h> +#include <asm/mpic.h> +#include <asm/of_platform.h> + +#undef DEBUG + +#define HOLLY_PCI_CFG_PHYS 0x7c000000 + +int holly_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +static void holly_remap_bridge(void) +{ + u32 lut_val, lut_addr; + int i; + + printk(KERN_INFO "Remapping PCI bridge\n"); + + /* Re-init the PCI bridge and LUT registers to have mappings that don't + * rely on PIBS + */ + lut_addr = 0x900; + for (i = 0; i < 31; i++) { + tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201); + lut_addr += 4; + tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0); + lut_addr += 4; + } + + /* Reserve the last LUT entry for PCI I/O space */ + tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241); + lut_addr += 4; + tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0); + + /* Map PCI I/O space */ + tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0); + tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1); + + /* Map PCI CFG space */ + tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0); + tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01); + + /* We don't need MEM32 and PRM remapping so disable them */ + tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0); + tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0); + tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0); + + /* Set P2O_BAR0 */ + tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0); + tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000); + + /* Init the PCI LUTs to do no remapping */ + lut_addr = 0x500; + lut_val = 0x00000002; + + for (i = 0; i < 32; i++) { + tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val); + lut_addr += 4; + tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000); + lut_addr += 4; + lut_val += 0x02000000; + } + tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900); + + /* Set 64-bit PCI bus address for system memory */ + tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0); + tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0); +} + +static void __init holly_setup_arch(void) +{ + struct device_node *cpu; + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("holly_setup_arch():set_bridge", 0); + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu) { + const unsigned int *fp; + + fp = of_get_property(cpu, "clock-frequency", NULL); + if (fp) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(cpu); + } + tsi108_csr_vir_base = get_vir_csrbase(); + + /* setup PCI host bridge */ + holly_remap_bridge(); + + np = of_find_node_by_type(NULL, "pci"); + if (np) + tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1); + + ppc_md.pci_exclude_device = holly_exclude_device; + if (ppc_md.progress) + ppc_md.progress("tsi108: resources set", 0x100); + + printk(KERN_INFO "PPC750GX/CL Platform\n"); +} + +/* + * Interrupt setup and service. Interrrupts on the holly come + * from the four external INT pins, PCI interrupts are routed via + * PCI interrupt control registers, it generates internal IRQ23 + * + * Interrupt routing on the Holly Board: + * TSI108:PB_INT[0] -> CPU0:INT# + * TSI108:PB_INT[1] -> CPU0:MCP# + * TSI108:PB_INT[2] -> N/C + * TSI108:PB_INT[3] -> N/C + */ +static void __init holly_init_IRQ(void) +{ + struct mpic *mpic; + phys_addr_t mpic_paddr = 0; + struct device_node *tsi_pic; +#ifdef CONFIG_PCI + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; + struct device_node *cascade_node = NULL; +#endif + + tsi_pic = of_find_node_by_type(NULL, "open-pic"); + if (tsi_pic) { + unsigned int size; + const void *prop = of_get_property(tsi_pic, "reg", &size); + mpic_paddr = of_translate_address(tsi_pic, prop); + } + + if (mpic_paddr == 0) { + printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__); + return; + } + + pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr); + + mpic = mpic_alloc(tsi_pic, mpic_paddr, + MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, + 24, + NR_IRQS-4, /* num_sources used */ + "Tsi108_PIC"); + + BUG_ON(mpic == NULL); + + mpic_assign_isu(mpic, 0, mpic_paddr + 0x100); + + mpic_init(mpic); + +#ifdef CONFIG_PCI + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == NULL) { + printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__); + return; + } + + cascade_node = of_find_node_by_type(NULL, "pic-router"); + if (cascade_node == NULL) { + printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq); + tsi108_pci_int_init(cascade_node); + set_irq_data(cascade_pci_irq, mpic); + set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); +#endif + /* Configure MPIC outputs to CPU0 */ + tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); + of_node_put(tsi_pic); +} + +void holly_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: IBM\n"); + seq_printf(m, "machine\t\t: PPC750 GX/CL\n"); +} + +void holly_restart(char *cmd) +{ + __be32 __iomem *ocn_bar1 = NULL; + unsigned long bar; + struct device_node *bridge = NULL; + const void *prop; + int size; + phys_addr_t addr = 0xc0000000; + + local_irq_disable(); + + bridge = of_find_node_by_type(NULL, "tsi-bridge"); + if (bridge) { + prop = of_get_property(bridge, "reg", &size); + addr = of_translate_address(bridge, prop); + } + addr += (TSI108_PB_OFFSET + 0x414); + + ocn_bar1 = ioremap(addr, 0x4); + + /* Turn on the BOOT bit so the addresses are correctly + * routed to the HLP interface */ + bar = ioread32be(ocn_bar1); + bar |= 2; + iowrite32be(bar, ocn_bar1); + iosync(); + + /* Set SRR0 to the reset vector and turn on MSR_IP */ + mtspr(SPRN_SRR0, 0xfff00100); + mtspr(SPRN_SRR1, MSR_IP); + + /* Do an rfi to jump back to firmware. Somewhat evil, + * but it works + */ + __asm__ __volatile__("rfi" : : : "memory"); + + /* Spin until reset happens. Shouldn't really get here */ + for (;;) ; +} + +void holly_power_off(void) +{ + local_irq_disable(); + /* No way to shut power off with software */ + for (;;) ; +} + +void holly_halt(void) +{ + holly_power_off(); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init holly_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ibm,holly")) + return 0; + return 1; +} + +static int ppc750_machine_check_exception(struct pt_regs *regs) +{ + const struct exception_table_entry *entry; + + /* Are we prepared to handle this fault */ + if ((entry = search_exception_tables(regs->nip)) != NULL) { + tsi108_clear_pci_cfg_error(); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; + } + return 0; +} + +define_machine(holly){ + .name = "PPC750 GX/CL TSI", + .probe = holly_probe, + .setup_arch = holly_setup_arch, + .init_IRQ = holly_init_IRQ, + .show_cpuinfo = holly_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = holly_restart, + .calibrate_decr = generic_calibrate_decr, + .machine_check_exception = ppc750_machine_check_exception, + .progress = udbg_progress, +}; |