summaryrefslogtreecommitdiff
path: root/arch/ppc/platforms/pplus.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/pplus.c')
-rw-r--r--arch/ppc/platforms/pplus.c844
1 files changed, 0 insertions, 844 deletions
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
deleted file mode 100644
index cbcac85c7a78..000000000000
--- a/arch/ppc/platforms/pplus.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/*
- * Board and PCI setup routines for MCG PowerPlus
- *
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * Derived from original PowerPlus PReP work by
- * Cort Dougan, Johnnie Peters, Matt Porter, and
- * Troy Benjegerdes.
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-#include <asm/vga.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/kgdb.h>
-#include <asm/reg.h>
-
-#include "pplus.h"
-
-#undef DUMP_DBATS
-
-TODC_ALLOC();
-
-extern void pplus_setup_hose(void);
-extern void pplus_set_VIA_IDE_native(void);
-
-extern unsigned long loops_per_jiffy;
-unsigned char *Motherboard_map_name;
-
-/* Tables for known hardware */
-
-/* Motorola Mesquite */
-static inline int
-mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
- * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */
- { 0, 0, 0, 0}, /* IDSEL 15 - unused */
- {19, 19, 19, 19}, /* IDSEL 16 - PMC Slot 1 */
- { 0, 0, 0, 0}, /* IDSEL 17 - unused */
- { 0, 0, 0, 0}, /* IDSEL 18 - unused */
- { 0, 0, 0, 0}, /* IDSEL 19 - unused */
- {24, 25, 26, 27}, /* IDSEL 20 - P2P bridge (to cPCI 1) */
- { 0, 0, 0, 0}, /* IDSEL 21 - unused */
- {28, 29, 30, 31} /* IDSEL 22 - P2P bridge (to cPCI 2) */
- };
-
- const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola Sitka */
-static inline int
-sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
- * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */
- { 0, 0, 0, 0}, /* IDSEL 15 - unused */
- {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */
- {28, 25, 26, 27}, /* IDSEL 17 - PMC Slot 2 */
- { 0, 0, 0, 0}, /* IDSEL 18 - unused */
- { 0, 0, 0, 0}, /* IDSEL 19 - unused */
- {20, 0, 0, 0} /* IDSEL 20 - P2P bridge (to cPCI) */
- };
-
- const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX */
-static inline int
-MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
- * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {19, 0, 0, 0}, /* IDSEL 12 - SCSI */
- { 0, 0, 0, 0}, /* IDSEL 13 - unused */
- {18, 0, 0, 0}, /* IDSEL 14 - Enet */
- { 0, 0, 0, 0}, /* IDSEL 15 - unused */
- {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */
- {26, 27, 28, 25}, /* IDSEL 17 - PMC Slot 2 */
- {27, 28, 25, 26} /* IDSEL 18 - PCI Slot 3 */
- };
-
- const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX Plus */
-/* Secondary bus interrupt routing is not supported yet */
-static inline int
-MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
- * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {19, 0, 0, 0}, /* IDSEL 12 - SCSI */
- { 0, 0, 0, 0}, /* IDSEL 13 - unused */
- {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */
- { 0, 0, 0, 0}, /* IDSEL 15 - unused */
- {25, 26, 27, 28}, /* IDSEL 16 - PCI Slot 1P */
- {26, 27, 28, 25}, /* IDSEL 17 - PCI Slot 2P */
- {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */
- {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */
- { 0, 0, 0, 0} /* IDSEL 20 - P2P Bridge */
- };
-
- const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static inline int
-Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- /* 2600
- * Raven 31
- * ISA 11
- * SCSI 12 - IRQ3
- * Univ 13
- * eth 14 - IRQ2
- * VGA 15 - IRQ4
- * PMC1 16 - IRQ9,10,11,12 = PMC1 A-D
- * PMC2 17 - IRQ12,9,10,11 = A-D
- * SCSI2 18 - IRQ11
- * eth2 19 - IRQ10
- * PCIX 20 - IRQ9,10,11,12 = PCI A-D
- */
-
- /* 2400
- * Hawk 31
- * ISA 11
- * Univ 13
- * eth 14 - IRQ2
- * PMC1 16 - IRQ9,10,11,12 = PMC A-D
- * PMC2 17 - IRQ12,9,10,11 = PMC A-D
- * PCIX 20 - IRQ9,10,11,12 = PMC A-D
- */
-
- /* 2300
- * Raven 31
- * ISA 11
- * Univ 13
- * eth 14 - IRQ2
- * PMC1 16 - 9,10,11,12 = A-D
- * PMC2 17 - 9,10,11,12 = B,C,D,A
- */
-
- static char pci_irq_table[][4] =
- /*
- * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
- * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {19, 0, 0, 0}, /* IDSEL 12 - SCSI */
- { 0, 0, 0, 0}, /* IDSEL 13 - Universe PCI - VME */
- {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */
- { 0, 0, 0, 0}, /* IDSEL 15 - unused */
- {25, 26, 27, 28}, /* IDSEL 16 - PCI/PMC Slot 1P */
- {28, 25, 26, 27}, /* IDSEL 17 - PCI/PMC Slot 2P */
- {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */
- {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */
- {25, 26, 27, 28} /* IDSEL 20 - P2P Bridge */
- };
-
- const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-#define MOTOROLA_CPUTYPE_REG 0x800
-#define MOTOROLA_BASETYPE_REG 0x803
-#define MPIC_RAVEN_ID 0x48010000
-#define MPIC_HAWK_ID 0x48030000
-#define MOT_PROC2_BIT 0x800
-
-static u_char pplus_openpic_initsenses[] __initdata = {
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),
-};
-
-int mot_entry = -1;
-int prep_keybd_present = 1;
-int mot_multi = 0;
-
-struct brd_info {
- /* 0x100 mask assumes for Raven and Hawk boards that the level/edge
- * are set */
- int cpu_type;
- /* 0x200 if this board has a Hawk chip. */
- int base_type;
- /* or'ed with 0x80 if this board should be checked for multi CPU */
- int max_cpu;
- const char *name;
- int (*map_irq) (struct pci_dev *, unsigned char, unsigned char);
-};
-struct brd_info mot_info[] = {
- {0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq},
- {0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq},
- {0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq},
- {0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq},
- {0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq},
- {0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq},
- {0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq},
- {0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq},
- {0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq},
- {0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq},
- {0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq},
- {0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq},
- {0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq},
- {0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq},
- {0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq},
- {0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq},
- {0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq},
- {0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq},
- {0x000, 0x00, 0x00, "", NULL}
-};
-
-void __init pplus_set_board_type(void)
-{
- unsigned char cpu_type;
- unsigned char base_mod;
- int entry;
- unsigned short devid;
- unsigned long *ProcInfo = NULL;
-
- cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
- base_mod = inb(MOTOROLA_BASETYPE_REG);
- early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-
- for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
- /* Check for Hawk chip */
- if (mot_info[entry].cpu_type & 0x200) {
- if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK)
- continue;
- } else {
- /* store the system config register for later use. */
- ProcInfo =
- (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4);
-
- /* Check non hawk boards */
- if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
- continue;
-
- if (mot_info[entry].base_type == 0) {
- mot_entry = entry;
- break;
- }
-
- if (mot_info[entry].base_type != base_mod)
- continue;
- }
-
- if (!(mot_info[entry].max_cpu & 0x80)) {
- mot_entry = entry;
- break;
- }
-
- /* processor 1 not present and max processor zero indicated */
- if ((*ProcInfo & MOT_PROC2_BIT)
- && !(mot_info[entry].max_cpu & 0x7f)) {
- mot_entry = entry;
- break;
- }
-
- /* processor 1 present and max processor zero indicated */
- if (!(*ProcInfo & MOT_PROC2_BIT)
- && (mot_info[entry].max_cpu & 0x7f)) {
- mot_entry = entry;
- break;
- }
-
- /* Indicate to system if this is a multiprocessor board */
- if (!(*ProcInfo & MOT_PROC2_BIT))
- mot_multi = 1;
- }
-
- if (mot_entry == -1)
- /* No particular cpu type found - assume Mesquite (MCP750) */
- mot_entry = 1;
-
- Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
- ppc_md.pci_map_irq = mot_info[mot_entry].map_irq;
-}
-void __init pplus_pib_init(void)
-{
- unsigned char reg;
- unsigned short short_reg;
-
- struct pci_dev *dev = NULL;
-
- /*
- * Perform specific configuration for the Via Tech or
- * or Winbond PCI-ISA-Bridge part.
- */
- if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_82C586_1, dev))) {
- /*
- * PPCBUG does not set the enable bits
- * for the IDE device. Force them on here.
- */
- pci_read_config_byte(dev, 0x40, &reg);
-
- reg |= 0x03; /* IDE: Chip Enable Bits */
- pci_write_config_byte(dev, 0x40, reg);
- }
-
- if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_82C586_2,
- dev)) && (dev->devfn = 0x5a)) {
- /* Force correct USB interrupt */
- dev->irq = 11;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
-
- if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
- PCI_DEVICE_ID_WINBOND_83C553, dev))) {
- /* Clear PCI Interrupt Routing Control Register. */
- short_reg = 0x0000;
- pci_write_config_word(dev, 0x44, short_reg);
- /* Route IDE interrupts to IRQ 14 */
- reg = 0xEE;
- pci_write_config_byte(dev, 0x43, reg);
- }
-
- if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
- PCI_DEVICE_ID_WINBOND_82C105, dev))) {
- /*
- * Disable LEGIRQ mode so PCI INTS are routed
- * directly to the 8259 and enable both channels
- */
- pci_write_config_dword(dev, 0x40, 0x10ff0033);
-
- /* Force correct IDE interrupt */
- dev->irq = 14;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
- pci_dev_put(dev);
-}
-
-void __init pplus_set_VIA_IDE_legacy(void)
-{
- unsigned short vend, dev;
-
- early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
- early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
- if ((vend == PCI_VENDOR_ID_VIA) &&
- (dev == PCI_DEVICE_ID_VIA_82C586_1)) {
- unsigned char temp;
-
- /* put back original "standard" port base addresses */
- early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
- PCI_BASE_ADDRESS_0, 0x1f1);
- early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
- PCI_BASE_ADDRESS_1, 0x3f5);
- early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
- PCI_BASE_ADDRESS_2, 0x171);
- early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
- PCI_BASE_ADDRESS_3, 0x375);
- early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
- PCI_BASE_ADDRESS_4, 0xcc01);
-
- /* put into legacy mode */
- early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
- &temp);
- temp &= ~0x05;
- early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
- temp);
- }
-}
-
-void pplus_set_VIA_IDE_native(void)
-{
- unsigned short vend, dev;
-
- early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
- early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
- if ((vend == PCI_VENDOR_ID_VIA) &&
- (dev == PCI_DEVICE_ID_VIA_82C586_1)) {
- unsigned char temp;
-
- /* put into native mode */
- early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
- &temp);
- temp |= 0x05;
- early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
- temp);
- }
-}
-
-void __init pplus_pcibios_fixup(void)
-{
-
- unsigned char reg;
- unsigned short devid;
- unsigned char base_mod;
-
- printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n",
- Motherboard_map_name);
-
- /* Setup the Winbond or Via PIB */
- pplus_pib_init();
-
- /* Set up floppy in PS/2 mode */
- outb(0x09, SIO_CONFIG_RA);
- reg = inb(SIO_CONFIG_RD);
- reg = (reg & 0x3F) | 0x40;
- outb(reg, SIO_CONFIG_RD);
- outb(reg, SIO_CONFIG_RD); /* Have to write twice to change! */
-
- /* This is a hack. If this is a 2300 or 2400 mot board then there is
- * no keyboard controller and we have to indicate that.
- */
-
- early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
- base_mod = inb(MOTOROLA_BASETYPE_REG);
- if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) ||
- (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1))
- prep_keybd_present = 0;
-}
-
-void __init pplus_find_bridges(void)
-{
- struct pci_controller *hose;
-
- hose = pcibios_alloc_controller();
- if (!hose)
- return;
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- hose->pci_mem_offset = PREP_ISA_MEM_BASE;
- hose->io_base_virt = (void *)PREP_ISA_IO_BASE;
-
- pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START,
- PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge");
- pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START,
- PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM,
- "PCI host bridge");
-
- hose->io_space.start = PPLUS_PCI_IO_START;
- hose->io_space.end = PPLUS_PCI_IO_END;
- hose->mem_space.start = PPLUS_PCI_MEM_START;
- hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE;
-
- if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
- PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
- PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END,
- PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
- != 0) {
- printk(KERN_CRIT "Could not initialize host bridge\n");
-
- }
-
- pplus_set_VIA_IDE_legacy();
-
- hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
- ppc_md.pcibios_fixup = pplus_pcibios_fixup;
- ppc_md.pci_swizzle = common_swizzle;
-}
-
-static int pplus_show_cpuinfo(struct seq_file *m)
-{
- seq_printf(m, "vendor\t\t: Motorola MCG\n");
- seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name);
-
- return 0;
-}
-
-static void __init pplus_setup_arch(void)
-{
- struct pci_controller *hose;
-
- if (ppc_md.progress)
- ppc_md.progress("pplus_setup_arch: enter", 0);
-
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000;
-
- if (ppc_md.progress)
- ppc_md.progress("pplus_setup_arch: find_bridges", 0);
-
- /* Setup PCI host bridge */
- pplus_find_bridges();
-
- hose = pci_bus_to_hose(0);
- isa_io_base = (ulong) hose->io_base_virt;
-
- if (ppc_md.progress)
- ppc_md.progress("pplus_setup_arch: set_board_type", 0);
-
- pplus_set_board_type();
-
- /* Enable L2. Assume we don't need to flush -- Cort */
- *(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_SDA2;
-#endif
-
- printk(KERN_INFO "Motorola PowerPlus Platform\n");
- printk(KERN_INFO
- "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-#ifdef CONFIG_VGA_CONSOLE
- /* remap the VGA memory */
- vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE,
- 0x08000000);
- conswitchp = &vga_con;
-#endif
-#ifdef CONFIG_PPCBUG_NVRAM
- /* Read in NVRAM data */
- init_prep_nvram();
-
- /* if no bootargs, look in NVRAM */
- if (cmd_line[0] == '\0') {
- char *bootargs;
- bootargs = prep_nvram_get_var("bootargs");
- if (bootargs != NULL) {
- strcpy(cmd_line, bootargs);
- /* again.. */
- strcpy(boot_command_line, cmd_line);
- }
- }
-#endif
- if (ppc_md.progress)
- ppc_md.progress("pplus_setup_arch: exit", 0);
-}
-
-static void pplus_restart(char *cmd)
-{
- unsigned long i = 10000;
-
- local_irq_disable();
-
- /* set VIA IDE controller into native mode */
- pplus_set_VIA_IDE_native();
-
- /* set exception prefix high - to the prom */
- _nmask_and_or_msr(0, MSR_IP);
-
- /* make sure bit 0 (reset) is a 0 */
- outb(inb(0x92) & ~1L, 0x92);
- /* signal a reset to system control port A - soft reset */
- outb(inb(0x92) | 1, 0x92);
-
- while (i != 0)
- i++;
- panic("restart failed\n");
-}
-
-static void pplus_halt(void)
-{
- /* set exception prefix high - to the prom */
- _nmask_and_or_msr(MSR_EE, MSR_IP);
-
- /* make sure bit 0 (reset) is a 0 */
- outb(inb(0x92) & ~1L, 0x92);
- /* signal a reset to system control port A - soft reset */
- outb(inb(0x92) | 1, 0x92);
-
- while (1) ;
- /*
- * Not reached
- */
-}
-
-static void pplus_power_off(void)
-{
- pplus_halt();
-}
-
-static void __init pplus_init_IRQ(void)
-{
- int i;
-
- if (ppc_md.progress)
- ppc_md.progress("init_irq: enter", 0);
-
- OpenPIC_InitSenses = pplus_openpic_initsenses;
- OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses);
-
- if (OpenPIC_Addr != NULL) {
-
- openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
- openpic_init(NUM_8259_INTERRUPTS);
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- i8259_irq);
- ppc_md.get_irq = openpic_get_irq;
- }
-
- i8259_init(0, 0);
-
- if (ppc_md.progress)
- ppc_md.progress("init_irq: exit", 0);
-}
-
-#ifdef CONFIG_SMP
-/* PowerPlus (MTX) support */
-static int __init smp_pplus_probe(void)
-{
- extern int mot_multi;
-
- if (mot_multi) {
- openpic_request_IPIs();
- smp_hw_index[1] = 1;
- return 2;
- }
-
- return 1;
-}
-
-static void __init smp_pplus_kick_cpu(int nr)
-{
- *(unsigned long *)KERNELBASE = nr;
- asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
- printk(KERN_INFO "CPU1 reset, waiting\n");
-}
-
-static void __init smp_pplus_setup_cpu(int cpu_nr)
-{
- if (OpenPIC_Addr)
- do_openpic_setup_cpu();
-}
-
-static struct smp_ops_t pplus_smp_ops = {
- smp_openpic_message_pass,
- smp_pplus_probe,
- smp_pplus_kick_cpu,
- smp_pplus_setup_cpu,
- .give_timebase = smp_generic_give_timebase,
- .take_timebase = smp_generic_take_timebase,
-};
-#endif /* CONFIG_SMP */
-
-#ifdef DUMP_DBATS
-static void print_dbat(int idx, u32 bat)
-{
-
- char str[64];
-
- sprintf(str, "DBAT%c%c = 0x%08x\n",
- (char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat);
- ppc_md.progress(str, 0);
-}
-
-#define DUMP_DBAT(x) \
- do { \
- u32 __temp = mfspr(x);\
- print_dbat(x, __temp); \
- } while (0)
-
-static void dump_dbats(void)
-{
- if (ppc_md.progress) {
- DUMP_DBAT(DBAT0U);
- DUMP_DBAT(DBAT0L);
- DUMP_DBAT(DBAT1U);
- DUMP_DBAT(DBAT1L);
- DUMP_DBAT(DBAT2U);
- DUMP_DBAT(DBAT2L);
- DUMP_DBAT(DBAT3U);
- DUMP_DBAT(DBAT3L);
- }
-}
-#endif
-
-static unsigned long __init pplus_find_end_of_memory(void)
-{
- unsigned long total;
-
- if (ppc_md.progress)
- ppc_md.progress("pplus_find_end_of_memory", 0);
-
-#ifdef DUMP_DBATS
- dump_dbats();
-#endif
-
- total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE);
- return (total);
-}
-
-static void __init pplus_map_io(void)
-{
- io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000,
- _PAGE_IO);
- io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO);
-}
-
-static void __init pplus_init2(void)
-{
-#ifdef CONFIG_NVRAM
- request_region(PREP_NVRAM_AS0, 0x8, "nvram");
-#endif
- request_region(0x20, 0x20, "pic1");
- request_region(0xa0, 0x20, "pic2");
- request_region(0x00, 0x20, "dma1");
- request_region(0x40, 0x20, "timer");
- request_region(0x80, 0x10, "dma page reg");
- request_region(0xc0, 0x20, "dma2");
-}
-
-/*
- * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3
- * to 0xf0000000 to access Falcon/Raven or Hawk registers
- */
-static __inline__ void pplus_set_bat(void)
-{
- /* wait for all outstanding memory accesses to complete */
- mb();
-
- /* setup DBATs */
- mtspr(SPRN_DBAT2U, 0x80001ffe);
- mtspr(SPRN_DBAT2L, 0x8000002a);
- mtspr(SPRN_DBAT3U, 0xf0001ffe);
- mtspr(SPRN_DBAT3L, 0xf000002a);
-
- /* wait for updates */
- mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- parse_bootinfo(find_bootinfo());
-
- /* Map in board regs, etc. */
- pplus_set_bat();
-
- isa_io_base = PREP_ISA_IO_BASE;
- isa_mem_base = PREP_ISA_MEM_BASE;
- pci_dram_offset = PREP_PCI_DRAM_OFFSET;
- ISA_DMA_THRESHOLD = 0x00ffffff;
- DMA_MODE_READ = 0x44;
- DMA_MODE_WRITE = 0x48;
- ppc_do_canonicalize_irqs = 1;
-
- ppc_md.setup_arch = pplus_setup_arch;
- ppc_md.show_cpuinfo = pplus_show_cpuinfo;
- ppc_md.init_IRQ = pplus_init_IRQ;
- /* this gets changed later on if we have an OpenPIC -- Cort */
- ppc_md.get_irq = i8259_irq;
- ppc_md.init = pplus_init2;
-
- ppc_md.restart = pplus_restart;
- ppc_md.power_off = pplus_power_off;
- ppc_md.halt = pplus_halt;
-
- TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
- PREP_NVRAM_DATA, 8);
-
- ppc_md.time_init = todc_time_init;
- ppc_md.set_rtc_time = todc_set_rtc_time;
- ppc_md.get_rtc_time = todc_get_rtc_time;
- ppc_md.calibrate_decr = todc_calibrate_decr;
- ppc_md.nvram_read_val = todc_m48txx_read_val;
- ppc_md.nvram_write_val = todc_m48txx_write_val;
-
- ppc_md.find_end_of_memory = pplus_find_end_of_memory;
- ppc_md.setup_io_mappings = pplus_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
- ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-#ifdef CONFIG_SMP
- smp_ops = &pplus_smp_ops;
-#endif /* CONFIG_SMP */
-}