summaryrefslogtreecommitdiff
path: root/arch/ppc/platforms
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms')
-rw-r--r--arch/ppc/platforms/Makefile4
-rw-r--r--arch/ppc/platforms/fads.h25
-rw-r--r--arch/ppc/platforms/mpc8272ads_setup.c367
-rw-r--r--arch/ppc/platforms/mpc885ads.h93
-rw-r--r--arch/ppc/platforms/mpc885ads_setup.c476
-rw-r--r--arch/ppc/platforms/pq2ads.c53
-rw-r--r--arch/ppc/platforms/pq2ads.h94
-rw-r--r--arch/ppc/platforms/pq2ads_pd.h32
8 files changed, 0 insertions, 1144 deletions
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index 40f53fbe6d35..6260231987cb 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -4,7 +4,6 @@
obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o
obj-$(CONFIG_PREP_RESIDUAL) += residual.o
-obj-$(CONFIG_PQ2ADS) += pq2ads.o
obj-$(CONFIG_TQM8260) += tqm8260_setup.o
obj-$(CONFIG_CPCI690) += cpci690.o
obj-$(CONFIG_EV64260) += ev64260.o
@@ -24,6 +23,3 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o
obj-$(CONFIG_SPRUCE) += spruce.o
obj-$(CONFIG_LITE5200) += lite5200.o
obj-$(CONFIG_EV64360) += ev64360.o
-obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o
-obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
-obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
index 2f9f0f60e3f7..5219366667b3 100644
--- a/arch/ppc/platforms/fads.h
+++ b/arch/ppc/platforms/fads.h
@@ -22,29 +22,6 @@
#include <asm/ppcboot.h>
-#if defined(CONFIG_MPC86XADS)
-
-#define BOARD_CHIP_NAME "MPC86X"
-
-/* U-Boot maps BCSR to 0xff080000 */
-#define BCSR_ADDR ((uint)0xff080000)
-
-/* MPC86XADS has one more CPLD and an additional BCSR.
- */
-#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
-#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
-
-#define BCSR5_T1_RST 0x10
-#define BCSR5_ATM155_RST 0x08
-#define BCSR5_ATM25_RST 0x04
-#define BCSR5_MII1_EN 0x02
-#define BCSR5_MII1_RST 0x01
-
-/* There is no PHY link change interrupt */
-#define PHY_INTERRUPT (-1)
-
-#else /* FADS */
-
/* Memory map is configured by the PROM startup.
* I tried to follow the FADS manual, although the startup PROM
* dictates this and we simply have to move some of the physical
@@ -55,8 +32,6 @@
/* PHY link change interrupt */
#define PHY_INTERRUPT SIU_IRQ2
-#endif /* CONFIG_MPC86XADS */
-
#define BCSR_SIZE ((uint)(64 * 1024))
#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
deleted file mode 100644
index 47f4b38edb5f..000000000000
--- a/arch/ppc/platforms/mpc8272ads_setup.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * arch/ppc/platforms/mpc8272ads_setup.c
- *
- * MPC82xx Board-specific PlatformDevice descriptions
- *
- * 2005 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/fs_enet_pd.h>
-#include <linux/platform_device.h>
-#include <linux/phy.h>
-
-#include <asm/io.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/immap_cpm2.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-#include <asm/ppcboot.h>
-#include <linux/fs_uart_pd.h>
-
-#include "pq2ads_pd.h"
-
-static void init_fcc1_ioports(struct fs_platform_info*);
-static void init_fcc2_ioports(struct fs_platform_info*);
-static void init_scc1_uart_ioports(struct fs_uart_platform_info*);
-static void init_scc4_uart_ioports(struct fs_uart_platform_info*);
-
-static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
- [fsid_scc1_uart] = {
- .init_ioports = init_scc1_uart_ioports,
- .fs_no = fsid_scc1_uart,
- .brg = 1,
- .tx_num_fifo = 4,
- .tx_buf_size = 32,
- .rx_num_fifo = 4,
- .rx_buf_size = 32,
- },
- [fsid_scc4_uart] = {
- .init_ioports = init_scc4_uart_ioports,
- .fs_no = fsid_scc4_uart,
- .brg = 4,
- .tx_num_fifo = 4,
- .tx_buf_size = 32,
- .rx_num_fifo = 4,
- .rx_buf_size = 32,
- },
-};
-
-static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = {
- .mdio_dat.bit = 18,
- .mdio_dir.bit = 18,
- .mdc_dat.bit = 19,
- .delay = 1,
-};
-
-static struct fs_platform_info mpc82xx_enet_pdata[] = {
- [fsid_fcc1] = {
- .fs_no = fsid_fcc1,
- .cp_page = CPM_CR_FCC1_PAGE,
- .cp_block = CPM_CR_FCC1_SBLOCK,
-
- .clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
- .clk_route = CMX1_CLK_ROUTE,
- .clk_mask = CMX1_CLK_MASK,
- .init_ioports = init_fcc1_ioports,
-
- .mem_offset = FCC1_MEM_OFFSET,
-
- .rx_ring = 32,
- .tx_ring = 32,
- .rx_copybreak = 240,
- .use_napi = 0,
- .napi_weight = 17,
- .bus_id = "0:00",
- },
- [fsid_fcc2] = {
- .fs_no = fsid_fcc2,
- .cp_page = CPM_CR_FCC2_PAGE,
- .cp_block = CPM_CR_FCC2_SBLOCK,
- .clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
- .clk_route = CMX2_CLK_ROUTE,
- .clk_mask = CMX2_CLK_MASK,
- .init_ioports = init_fcc2_ioports,
-
- .mem_offset = FCC2_MEM_OFFSET,
-
- .rx_ring = 32,
- .tx_ring = 32,
- .rx_copybreak = 240,
- .use_napi = 0,
- .napi_weight = 17,
- .bus_id = "0:03",
- },
-};
-
-static void init_fcc1_ioports(struct fs_platform_info* pdata)
-{
- struct io_port *io;
- u32 tempval;
- cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
- u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
-
- io = &immap->im_ioport;
-
- /* Enable the PHY */
- clrbits32(bcsr, BCSR1_FETHIEN);
- setbits32(bcsr, BCSR1_FETH_RST);
-
- /* FCC1 pins are on port A/C. */
- /* Configure port A and C pins for FCC1 Ethernet. */
-
- tempval = in_be32(&io->iop_pdira);
- tempval &= ~PA1_DIRA0;
- tempval |= PA1_DIRA1;
- out_be32(&io->iop_pdira, tempval);
-
- tempval = in_be32(&io->iop_psora);
- tempval &= ~PA1_PSORA0;
- tempval |= PA1_PSORA1;
- out_be32(&io->iop_psora, tempval);
-
- setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1);
-
- /* Alter clocks */
- tempval = PC_F1TXCLK|PC_F1RXCLK;
-
- clrbits32(&io->iop_psorc, tempval);
- clrbits32(&io->iop_pdirc, tempval);
- setbits32(&io->iop_pparc, tempval);
-
- clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK);
- setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE);
- iounmap(bcsr);
- iounmap(immap);
-}
-
-static void init_fcc2_ioports(struct fs_platform_info* pdata)
-{
- cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
- u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
-
- struct io_port *io;
- u32 tempval;
-
- immap = cpm2_immr;
-
- io = &immap->im_ioport;
-
- /* Enable the PHY */
- clrbits32(bcsr, BCSR3_FETHIEN2);
- setbits32(bcsr, BCSR3_FETH2_RST);
-
- /* FCC2 are port B/C. */
- /* Configure port A and C pins for FCC2 Ethernet. */
-
- tempval = in_be32(&io->iop_pdirb);
- tempval &= ~PB2_DIRB0;
- tempval |= PB2_DIRB1;
- out_be32(&io->iop_pdirb, tempval);
-
- tempval = in_be32(&io->iop_psorb);
- tempval &= ~PB2_PSORB0;
- tempval |= PB2_PSORB1;
- out_be32(&io->iop_psorb, tempval);
-
- setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1);
-
- tempval = PC_F2RXCLK|PC_F2TXCLK;
-
- /* Alter clocks */
- clrbits32(&io->iop_psorc,tempval);
- clrbits32(&io->iop_pdirc,tempval);
- setbits32(&io->iop_pparc,tempval);
-
- clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK);
- setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE);
-
- iounmap(bcsr);
- iounmap(immap);
-}
-
-
-static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
- int idx)
-{
- bd_t* bi = (void*)__res;
- int fs_no = fsid_fcc1+pdev->id-1;
-
- if(fs_no >= ARRAY_SIZE(mpc82xx_enet_pdata)) {
- return;
- }
-
- mpc82xx_enet_pdata[fs_no].dpram_offset=
- (u32)cpm2_immr->im_dprambase;
- mpc82xx_enet_pdata[fs_no].fcc_regs_c =
- (u32)cpm2_immr->im_fcc_c;
- memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6);
-
- /* prevent dup mac */
- if(fs_no == fsid_fcc2)
- mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1;
-
- pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no];
-}
-
-static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
- int idx)
-{
- bd_t *bd = (bd_t *) __res;
- struct fs_uart_platform_info *pinfo;
- int num = ARRAY_SIZE(mpc8272_uart_pdata);
- int id = fs_uart_id_scc2fsid(idx);
-
- /* no need to alter anything if console */
- if ((id < num) && (!pdev->dev.platform_data)) {
- pinfo = &mpc8272_uart_pdata[id];
- pinfo->uart_clk = bd->bi_intfreq;
- pdev->dev.platform_data = pinfo;
- }
-}
-
-static void init_scc1_uart_ioports(struct fs_uart_platform_info* pdata)
-{
- cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
-
- /* SCC1 is only on port D */
- setbits32(&immap->im_ioport.iop_ppard,0x00000003);
- clrbits32(&immap->im_ioport.iop_psord,0x00000001);
- setbits32(&immap->im_ioport.iop_psord,0x00000002);
- clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
- setbits32(&immap->im_ioport.iop_pdird,0x00000002);
-
- /* Wire BRG1 to SCC1 */
- clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
-
- iounmap(immap);
-}
-
-static void init_scc4_uart_ioports(struct fs_uart_platform_info* pdata)
-{
- cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
-
- setbits32(&immap->im_ioport.iop_ppard,0x00000600);
- clrbits32(&immap->im_ioport.iop_psord,0x00000600);
- clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
- setbits32(&immap->im_ioport.iop_pdird,0x00000400);
-
- /* Wire BRG4 to SCC4 */
- clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
- setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
-
- iounmap(immap);
-}
-
-static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev,
- int idx)
-{
- m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT;
- m82xx_mii_bb_pdata.irq[1] = PHY_POLL;
- m82xx_mii_bb_pdata.irq[2] = PHY_POLL;
- m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT;
- m82xx_mii_bb_pdata.irq[31] = PHY_POLL;
-
-
- m82xx_mii_bb_pdata.mdio_dat.offset =
- (u32)&cpm2_immr->im_ioport.iop_pdatc;
-
- m82xx_mii_bb_pdata.mdio_dir.offset =
- (u32)&cpm2_immr->im_ioport.iop_pdirc;
-
- m82xx_mii_bb_pdata.mdc_dat.offset =
- (u32)&cpm2_immr->im_ioport.iop_pdatc;
-
-
- pdev->dev.platform_data = &m82xx_mii_bb_pdata;
-}
-
-static int mpc8272ads_platform_notify(struct device *dev)
-{
- static const struct platform_notify_dev_map dev_map[] = {
- {
- .bus_id = "fsl-cpm-fcc",
- .rtn = mpc8272ads_fixup_enet_pdata,
- },
- {
- .bus_id = "fsl-cpm-scc:uart",
- .rtn = mpc8272ads_fixup_uart_pdata,
- },
- {
- .bus_id = "fsl-bb-mdio",
- .rtn = mpc8272ads_fixup_mdio_pdata,
- },
- {
- .bus_id = NULL
- }
- };
- platform_notify_map(dev_map,dev);
-
- return 0;
-
-}
-
-int __init mpc8272ads_init(void)
-{
- printk(KERN_NOTICE "mpc8272ads: Init\n");
-
- platform_notify = mpc8272ads_platform_notify;
-
- ppc_sys_device_initfunc();
-
- ppc_sys_device_disable_all();
- ppc_sys_device_enable(MPC82xx_CPM_FCC1);
- ppc_sys_device_enable(MPC82xx_CPM_FCC2);
-
- /* to be ready for console, let's attach pdata here */
-#ifdef CONFIG_SERIAL_CPM_SCC1
- ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
- ppc_sys_device_enable(MPC82xx_CPM_SCC1);
-
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC4
- ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
- ppc_sys_device_enable(MPC82xx_CPM_SCC4);
-#endif
-
- ppc_sys_device_enable(MPC82xx_MDIO_BB);
-
- return 0;
-}
-
-/*
- To prevent confusion, console selection is gross:
- by 0 assumed SCC1 and by 1 assumed SCC4
- */
-struct platform_device* early_uart_get_pdev(int index)
-{
- bd_t *bd = (bd_t *) __res;
- struct fs_uart_platform_info *pinfo;
-
- struct platform_device* pdev = NULL;
- if(index) { /*assume SCC4 here*/
- pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
- pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
- } else { /*over SCC1*/
- pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
- pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
- }
-
- pinfo->uart_clk = bd->bi_intfreq;
- pdev->dev.platform_data = pinfo;
- ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
- return NULL;
-}
-
-arch_initcall(mpc8272ads_init);
diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h
deleted file mode 100644
index d3bbbb3c9a1f..000000000000
--- a/arch/ppc/platforms/mpc885ads.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Freescale MPC885ADS board.
- * Copied from the FADS stuff.
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MPC885ADS_H__
-#define __ASM_MPC885ADS_H__
-
-
-#include <asm/ppcboot.h>
-
-/* U-Boot maps BCSR to 0xff080000 */
-#define BCSR_ADDR ((uint)0xff080000)
-#define BCSR_SIZE ((uint)32)
-#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
-#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
-#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
-#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
-#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
-
-#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
-#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
-
-#define IMAP_ADDR ((uint)0xff000000)
-#define IMAP_SIZE ((uint)(64 * 1024))
-
-#define PCMCIA_MEM_ADDR ((uint)0xff020000)
-#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
-
-/* Bits of interest in the BCSRs.
- */
-#define BCSR1_ETHEN ((uint)0x20000000)
-#define BCSR1_IRDAEN ((uint)0x10000000)
-#define BCSR1_RS232EN_1 ((uint)0x01000000)
-#define BCSR1_PCCEN ((uint)0x00800000)
-#define BCSR1_PCCVCC0 ((uint)0x00400000)
-#define BCSR1_PCCVPP0 ((uint)0x00200000)
-#define BCSR1_PCCVPP1 ((uint)0x00100000)
-#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
-#define BCSR1_RS232EN_2 ((uint)0x00040000)
-#define BCSR1_PCCVCC1 ((uint)0x00010000)
-#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
-
-#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/
-#define BCSR4_USB_LO_SPD ((uint)0x04000000)
-#define BCSR4_USB_VCC ((uint)0x02000000)
-#define BCSR4_USB_FULL_SPD ((uint)0x00040000)
-#define BCSR4_USB_EN ((uint)0x00020000)
-
-#define BCSR5_MII2_EN 0x40
-#define BCSR5_MII2_RST 0x20
-#define BCSR5_T1_RST 0x10
-#define BCSR5_ATM155_RST 0x08
-#define BCSR5_ATM25_RST 0x04
-#define BCSR5_MII1_EN 0x02
-#define BCSR5_MII1_RST 0x01
-
-/* Interrupt level assignments */
-#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
-#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
-#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */
-#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
-
-/* We don't use the 8259 */
-#define NR_8259_INTS 0
-
-/* CPM Ethernet through SCC3 */
-#define PA_ENET_RXD ((ushort)0x0040)
-#define PA_ENET_TXD ((ushort)0x0080)
-#define PE_ENET_TCLK ((uint)0x00004000)
-#define PE_ENET_RCLK ((uint)0x00008000)
-#define PE_ENET_TENA ((uint)0x00000010)
-#define PC_ENET_CLSN ((ushort)0x0400)
-#define PC_ENET_RENA ((ushort)0x0800)
-
-/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
- * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
-#define SICR_ENET_MASK ((uint)0x00ff0000)
-#define SICR_ENET_CLKRT ((uint)0x002c0000)
-
-#define BOARD_CHIP_NAME "MPC885"
-
-#endif /* __ASM_MPC885ADS_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
deleted file mode 100644
index ba06cc08cdab..000000000000
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*arch/ppc/platforms/mpc885ads_setup.c
- *
- * Platform setup for the Freescale mpc885ads board
- *
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-
-#include <linux/fs_enet_pd.h>
-#include <linux/fs_uart_pd.h>
-#include <linux/mii.h>
-
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/ppcboot.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-#include <asm/ppc_sys.h>
-
-extern unsigned char __res[];
-static void setup_smc1_ioports(struct fs_uart_platform_info*);
-static void setup_smc2_ioports(struct fs_uart_platform_info*);
-
-static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
-static void setup_fec1_ioports(struct fs_platform_info*);
-static void setup_fec2_ioports(struct fs_platform_info*);
-static void setup_scc3_ioports(struct fs_platform_info*);
-
-static struct fs_uart_platform_info mpc885_uart_pdata[] = {
- [fsid_smc1_uart] = {
- .brg = 1,
- .fs_no = fsid_smc1_uart,
- .init_ioports = setup_smc1_ioports,
- .tx_num_fifo = 4,
- .tx_buf_size = 32,
- .rx_num_fifo = 4,
- .rx_buf_size = 32,
- },
- [fsid_smc2_uart] = {
- .brg = 2,
- .fs_no = fsid_smc2_uart,
- .init_ioports = setup_smc2_ioports,
- .tx_num_fifo = 4,
- .tx_buf_size = 32,
- .rx_num_fifo = 4,
- .rx_buf_size = 32,
- },
-};
-
-static struct fs_platform_info mpc8xx_enet_pdata[] = {
- [fsid_fec1] = {
- .rx_ring = 128,
- .tx_ring = 16,
- .rx_copybreak = 240,
-
- .use_napi = 1,
- .napi_weight = 17,
-
- .init_ioports = setup_fec1_ioports,
-
- .bus_id = "0:00",
- .has_phy = 1,
- },
- [fsid_fec2] = {
- .rx_ring = 128,
- .tx_ring = 16,
- .rx_copybreak = 240,
-
- .use_napi = 1,
- .napi_weight = 17,
-
- .init_ioports = setup_fec2_ioports,
-
- .bus_id = "0:01",
- .has_phy = 1,
- },
- [fsid_scc3] = {
- .rx_ring = 64,
- .tx_ring = 8,
- .rx_copybreak = 240,
-
- .use_napi = 1,
- .napi_weight = 17,
-
- .init_ioports = setup_scc3_ioports,
-#ifdef CONFIG_FIXED_MII_10_FDX
- .bus_id = "fixed@100:1",
-#else
- .bus_id = "0:02",
- #endif
- },
-};
-
-void __init board_init(void)
-{
- cpm8xx_t *cp = cpmp;
- unsigned int *bcsr_io;
-
-#ifdef CONFIG_FS_ENET
- immap_t *immap = (immap_t *) IMAP_ADDR;
-#endif
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
- if (bcsr_io == NULL) {
- printk(KERN_CRIT "Could not remap BCSR\n");
- return;
- }
-#ifdef CONFIG_SERIAL_CPM_SMC1
- cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
- clrbits32(bcsr_io, BCSR1_RS232EN_1);
- cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
- cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-#else
- setbits32(bcsr_io,BCSR1_RS232EN_1);
- cp->cp_smc[0].smc_smcmr = 0;
- cp->cp_smc[0].smc_smce = 0;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
- cp->cp_simode &= ~(0xe0000000 >> 1);
- cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
- clrbits32(bcsr_io,BCSR1_RS232EN_2);
- cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
- cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-#else
- setbits32(bcsr_io,BCSR1_RS232EN_2);
- cp->cp_smc[1].smc_smcmr = 0;
- cp->cp_smc[1].smc_smce = 0;
-#endif
- iounmap(bcsr_io);
-
-#ifdef CONFIG_FS_ENET
- /* use MDC for MII (common) */
- setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
- clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
- bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
- clrbits32(bcsr_io,BCSR5_MII1_EN);
- clrbits32(bcsr_io,BCSR5_MII1_RST);
-#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
- clrbits32(bcsr_io,BCSR5_MII2_EN);
- clrbits32(bcsr_io,BCSR5_MII2_RST);
-#endif
- iounmap(bcsr_io);
-#endif
-}
-
-static void setup_fec1_ioports(struct fs_platform_info* pdata)
-{
- immap_t *immap = (immap_t *) IMAP_ADDR;
-
- /* configure FEC1 pins */
- setbits16(&immap->im_ioport.iop_papar, 0xf830);
- setbits16(&immap->im_ioport.iop_padir, 0x0830);
- clrbits16(&immap->im_ioport.iop_padir, 0xf000);
- setbits32(&immap->im_cpm.cp_pbpar, 0x00001001);
-
- clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001);
- setbits16(&immap->im_ioport.iop_pcpar, 0x000c);
- clrbits16(&immap->im_ioport.iop_pcdir, 0x000c);
- setbits32(&immap->im_cpm.cp_pepar, 0x00000003);
-
- setbits32(&immap->im_cpm.cp_pedir, 0x00000003);
- clrbits32(&immap->im_cpm.cp_peso, 0x00000003);
- clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
-}
-
-static void setup_fec2_ioports(struct fs_platform_info* pdata)
-{
- immap_t *immap = (immap_t *) IMAP_ADDR;
-
- /* configure FEC2 pins */
- setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
- setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
- clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
- setbits32(&immap->im_cpm.cp_peso, 0x00037800);
- clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
-}
-
-static void setup_scc3_ioports(struct fs_platform_info* pdata)
-{
- immap_t *immap = (immap_t *) IMAP_ADDR;
- unsigned *bcsr_io;
-
- bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
-
- if (bcsr_io == NULL) {
- printk(KERN_CRIT "Could not remap BCSR\n");
- return;
- }
-
- /* Enable the PHY.
- */
- clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
- udelay(1000);
- setbits32(bcsr_io+4, BCSR4_ETH10_RST);
- /* Configure port A pins for Txd and Rxd.
- */
- setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
- clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
-
- /* Configure port C pins to enable CLSN and RENA.
- */
- clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
- clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
- setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
-
- /* Configure port E for TCLK and RCLK.
- */
- setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
- clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
- clrbits32(&immap->im_cpm.cp_pedir,
- PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
- clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
- setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
-
- /* Configure Serial Interface clock routing.
- * First, clear all SCC bits to zero, then set the ones we want.
- */
- clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
- setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
-
- /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
- */
- immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
- /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
- * by H/W setting after reset. SCC ethernet controller support only half duplex.
- * This discrepancy of modes causes a lot of carrier lost errors.
- */
-
- /* In the original SCC enet driver the following code is placed at
- the end of the initialization */
- setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
- clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
- setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
-
- setbits32(bcsr_io+4, BCSR1_ETHEN);
- iounmap(bcsr_io);
-}
-
-static int mac_count = 0;
-
-static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
-{
- struct fs_platform_info *fpi;
- bd_t *bd = (bd_t *) __res;
- char *e;
- int i;
-
- if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
- printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
- return;
- }
-
- fpi = &mpc8xx_enet_pdata[fs_no];
-
- switch (fs_no) {
- case fsid_fec1:
- fpi->init_ioports = &setup_fec1_ioports;
- break;
- case fsid_fec2:
- fpi->init_ioports = &setup_fec2_ioports;
- break;
- case fsid_scc3:
- fpi->init_ioports = &setup_scc3_ioports;
- break;
- default:
- printk(KERN_WARNING "Device %s is not supported!\n", pdev->name);
- return;
- }
-
- pdev->dev.platform_data = fpi;
- fpi->fs_no = fs_no;
-
- e = (unsigned char *)&bd->bi_enetaddr;
- for (i = 0; i < 6; i++)
- fpi->macaddr[i] = *e++;
-
- fpi->macaddr[5] += mac_count++;
-
-}
-
-static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev,
- int idx)
-{
- /* This is for FEC devices only */
- if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
- return;
- mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
-}
-
-static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
- int idx)
-{
- /* This is for SCC devices only */
- if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
- return;
-
- mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
-}
-
-static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
-{
- immap_t *immap = (immap_t *) IMAP_ADDR;
- unsigned *bcsr_io;
- unsigned int iobits = 0x000000c0;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
- if (bcsr_io == NULL) {
- printk(KERN_CRIT "Could not remap BCSR1\n");
- return;
- }
- clrbits32(bcsr_io,BCSR1_RS232EN_1);
- iounmap(bcsr_io);
-
- setbits32(&immap->im_cpm.cp_pbpar, iobits);
- clrbits32(&immap->im_cpm.cp_pbdir, iobits);
- clrbits16(&immap->im_cpm.cp_pbodr, iobits);
-}
-
-static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
-{
- immap_t *immap = (immap_t *) IMAP_ADDR;
- unsigned *bcsr_io;
- unsigned int iobits = 0x00000c00;
-
- bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
- if (bcsr_io == NULL) {
- printk(KERN_CRIT "Could not remap BCSR1\n");
- return;
- }
- clrbits32(bcsr_io,BCSR1_RS232EN_2);
- iounmap(bcsr_io);
-
-#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
- setbits32(&immap->im_cpm.cp_pbpar, iobits);
- clrbits32(&immap->im_cpm.cp_pbdir, iobits);
- clrbits16(&immap->im_cpm.cp_pbodr, iobits);
-#else
- setbits16(&immap->im_ioport.iop_papar, iobits);
- clrbits16(&immap->im_ioport.iop_padir, iobits);
- clrbits16(&immap->im_ioport.iop_paodr, iobits);
-#endif
-}
-
-static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
- int idx)
-{
- bd_t *bd = (bd_t *) __res;
- struct fs_uart_platform_info *pinfo;
- int num = ARRAY_SIZE(mpc885_uart_pdata);
-
- int id = fs_uart_id_smc2fsid(idx);
-
- /* no need to alter anything if console */
- if ((id < num) && (!pdev->dev.platform_data)) {
- pinfo = &mpc885_uart_pdata[id];
- pinfo->uart_clk = bd->bi_intfreq;
- pdev->dev.platform_data = pinfo;
- }
-}
-
-
-static int mpc885ads_platform_notify(struct device *dev)
-{
-
- static const struct platform_notify_dev_map dev_map[] = {
- {
- .bus_id = "fsl-cpm-fec",
- .rtn = mpc885ads_fixup_fec_enet_pdata,
- },
- {
- .bus_id = "fsl-cpm-scc",
- .rtn = mpc885ads_fixup_scc_enet_pdata,
- },
- {
- .bus_id = "fsl-cpm-smc:uart",
- .rtn = mpc885ads_fixup_uart_pdata
- },
- {
- .bus_id = NULL
- }
- };
-
- platform_notify_map(dev_map,dev);
-
- return 0;
-}
-
-int __init mpc885ads_init(void)
-{
- struct fs_mii_fec_platform_info* fmpi;
- bd_t *bd = (bd_t *) __res;
-
- printk(KERN_NOTICE "mpc885ads: Init\n");
-
- platform_notify = mpc885ads_platform_notify;
-
- ppc_sys_device_initfunc();
- ppc_sys_device_disable_all();
-
- ppc_sys_device_enable(MPC8xx_CPM_FEC1);
-
- ppc_sys_device_enable(MPC8xx_MDIO_FEC);
- fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
- &mpc8xx_mdio_fec_pdata;
-
- fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-
- /* No PHY interrupt line here */
- fmpi->irq[0xf] = SIU_IRQ7;
-
-#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
- ppc_sys_device_enable(MPC8xx_CPM_SCC3);
-
-#endif
-#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
- ppc_sys_device_enable(MPC8xx_CPM_FEC2);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC1
- ppc_sys_device_enable(MPC8xx_CPM_SMC1);
- ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
- ppc_sys_device_enable(MPC8xx_CPM_SMC2);
- ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
-#endif
- return 0;
-}
-
-arch_initcall(mpc885ads_init);
-
-/*
- To prevent confusion, console selection is gross:
- by 0 assumed SMC1 and by 1 assumed SMC2
- */
-struct platform_device* early_uart_get_pdev(int index)
-{
- bd_t *bd = (bd_t *) __res;
- struct fs_uart_platform_info *pinfo;
-
- struct platform_device* pdev = NULL;
- if(index) { /*assume SMC2 here*/
- pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
- pinfo = &mpc885_uart_pdata[1];
- } else { /*over SMC1*/
- pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
- pinfo = &mpc885_uart_pdata[0];
- }
-
- pinfo->uart_clk = bd->bi_intfreq;
- pdev->dev.platform_data = pinfo;
- ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
- return NULL;
-}
-
diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c
deleted file mode 100644
index 7fc2e02f5246..000000000000
--- a/arch/ppc/platforms/pq2ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * PQ2ADS platform support
- *
- * Author: Kumar Gala <galak@kernel.crashing.org>
- * Derived from: est8260_setup.c by Allen Curtis
- *
- * Copyright 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/immap_cpm2.h>
-
-void __init
-m82xx_board_setup(void)
-{
- cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
- u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
-
- /* Enable the 2nd UART port */
- clrbits32(bcsr, BCSR1_RS232_EN2);
-
-#ifdef CONFIG_SERIAL_CPM_SCC1
- clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
- clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC2
- clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
- clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC3
- clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
- clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC4
- clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
- clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-
- iounmap(bcsr);
- iounmap(immap);
-}
diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h
deleted file mode 100644
index 2b287f4e0ca3..000000000000
--- a/arch/ppc/platforms/pq2ads.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola MPC8260ADS/MPC8266ADS-PCI boards.
- * Copied from the RPX-Classic and SBS8260 stuff.
- *
- * Copyright (c) 2001 Dan Malek (dan@mvista.com)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_ADS8260_DEFS
-#define __MACH_ADS8260_DEFS
-
-
-#include <asm/ppcboot.h>
-
-#if defined(CONFIG_ADS8272)
-#define BOARD_CHIP_NAME "8272"
-#endif
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need. The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define CPM_MAP_ADDR ((uint)0xf0000000)
-#define BCSR_ADDR ((uint)0xf4500000)
-#define BCSR_SIZE ((uint)(32 * 1024))
-
-#define BOOTROM_RESTART_ADDR ((uint)0xff000104)
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR "Motorola"
-#define CPUINFO_MACHINE "PQ2 ADS PowerPC"
-
-/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
- * only on word boundaries.
- * Not all are used (yet), or are interesting to us (yet).
- */
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */
-#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */
-#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable */
-#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */
-#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable */
-#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable */
-#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */
-#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */
-
-#define PHY_INTERRUPT SIU_INT_IRQ7
-
-#ifdef CONFIG_PCI
-/* PCI interrupt controller */
-#define PCI_INT_STAT_REG 0xF8200000
-#define PCI_INT_MASK_REG 0xF8200004
-#define PIRQA (NR_CPM_INTS + 0)
-#define PIRQB (NR_CPM_INTS + 1)
-#define PIRQC (NR_CPM_INTS + 2)
-#define PIRQD (NR_CPM_INTS + 3)
-
-/*
- * PCI memory map definitions for MPC8266ADS-PCI.
- *
- * processor view
- * local address PCI address target
- * 0x80000000-0x9FFFFFFF 0x80000000-0x9FFFFFFF PCI mem with prefetch
- * 0xA0000000-0xBFFFFFFF 0xA0000000-0xBFFFFFFF PCI mem w/o prefetch
- * 0xF4000000-0xF7FFFFFF 0x00000000-0x03FFFFFF PCI IO
- *
- * PCI master view
- * local address PCI address target
- * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory
- */
-
-/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h
- Here we should redefine what is unique for this board */
-#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */
-#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */
-#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */
-
-#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */
-#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */
-
-#if defined(CONFIG_ADS8272)
-#define PCI_INT_TO_SIU SIU_INT_IRQ2
-#elif defined(CONFIG_PQ2FADS)
-#define PCI_INT_TO_SIU SIU_INT_IRQ6
-#else
-#warning PCI Bridge will be without interrupts support
-#endif
-
-#endif /* CONFIG_PCI */
-
-#endif /* __MACH_ADS8260_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h
deleted file mode 100644
index 672483df8079..000000000000
--- a/arch/ppc/platforms/pq2ads_pd.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __PQ2ADS_PD_H
-#define __PQ2ADS_PD_H
-/*
- * arch/ppc/platforms/82xx/pq2ads_pd.h
- *
- * Some defines for MPC82xx board-specific PlatformDevice descriptions
- *
- * 2005 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/* FCC1 Clock Source Configuration. These can be redefined in the board specific file.
- Can only choose from CLK9-12 */
-
-#define F1_RXCLK 11
-#define F1_TXCLK 10
-
-/* FCC2 Clock Source Configuration. These can be redefined in the board specific file.
- Can only choose from CLK13-16 */
-#define F2_RXCLK 15
-#define F2_TXCLK 16
-
-/* FCC3 Clock Source Configuration. These can be redefined in the board specific file.
- Can only choose from CLK13-16 */
-#define F3_RXCLK 13
-#define F3_TXCLK 14
-
-#endif