diff options
Diffstat (limited to 'arch/s390/kernel/entry64.S')
| -rw-r--r-- | arch/s390/kernel/entry64.S | 97 |
1 files changed, 51 insertions, 46 deletions
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 4c17eece707e..1c039d0c24c7 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -47,7 +47,6 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ _TIF_MCCK_PENDING) _TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \ _TIF_SYSCALL_TRACEPOINT) -_TIF_EXIT_SIE = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING) #define BASED(name) name-system_call(%r13) @@ -81,23 +80,27 @@ _TIF_EXIT_SIE = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING) #endif .endm - .macro HANDLE_SIE_INTERCEPT scratch,pgmcheck + .macro HANDLE_SIE_INTERCEPT scratch,reason #if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE) tmhh %r8,0x0001 # interrupting from user ? - jnz .+42 + jnz .+62 lgr \scratch,%r9 - slg \scratch,BASED(.Lsie_loop) - clg \scratch,BASED(.Lsie_length) - .if \pgmcheck + slg \scratch,BASED(.Lsie_critical) + clg \scratch,BASED(.Lsie_critical_length) + .if \reason==1 # Some program interrupts are suppressing (e.g. protection). # We must also check the instruction after SIE in that case. # do_protection_exception will rewind to rewind_pad - jh .+22 + jh .+42 .else - jhe .+22 + jhe .+42 .endif - lg %r9,BASED(.Lsie_loop) - LPP BASED(.Lhost_id) # set host id + lg %r14,__SF_EMPTY(%r15) # get control block pointer + LPP __SF_EMPTY+16(%r15) # set host id + ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE + lctlg %c1,%c1,__LC_USER_ASCE # load primary asce + larl %r9,sie_exit # skip forward to sie_exit + mvi __SF_EMPTY+31(%r15),\reason # set exit reason #endif .endm @@ -450,7 +453,7 @@ ENTRY(io_int_handler) lg %r12,__LC_THREAD_INFO larl %r13,system_call lmg %r8,%r9,__LC_IO_OLD_PSW - HANDLE_SIE_INTERCEPT %r14,0 + HANDLE_SIE_INTERCEPT %r14,2 SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_STACK,STACK_SHIFT tmhh %r8,0x0001 # interrupting from user? jz io_skip @@ -460,10 +463,18 @@ io_skip: stmg %r0,%r7,__PT_R0(%r11) mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC stmg %r8,%r9,__PT_PSW(%r11) + mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID TRACE_IRQS_OFF xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) +io_loop: lgr %r2,%r11 # pass pointer to pt_regs brasl %r14,do_IRQ + tm __LC_MACHINE_FLAGS+6,0x10 # MACHINE_FLAG_LPAR + jz io_return + tpi 0 + jz io_return + mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID + j io_loop io_return: LOCKDEP_SYS_EXIT TRACE_IRQS_ON @@ -595,7 +606,7 @@ ENTRY(ext_int_handler) lg %r12,__LC_THREAD_INFO larl %r13,system_call lmg %r8,%r9,__LC_EXT_OLD_PSW - HANDLE_SIE_INTERCEPT %r14,0 + HANDLE_SIE_INTERCEPT %r14,3 SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_STACK,STACK_SHIFT tmhh %r8,0x0001 # interrupting from user ? jz ext_skip @@ -605,13 +616,13 @@ ext_skip: stmg %r0,%r7,__PT_R0(%r11) mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC stmg %r8,%r9,__PT_PSW(%r11) + lghi %r1,__LC_EXT_PARAMS2 + mvc __PT_INT_CODE(4,%r11),__LC_EXT_CPU_ADDR + mvc __PT_INT_PARM(4,%r11),__LC_EXT_PARAMS + mvc __PT_INT_PARM_LONG(8,%r11),0(%r1) TRACE_IRQS_OFF xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) - lghi %r1,4096 lgr %r2,%r11 # pass pointer to pt_regs - llgf %r3,__LC_EXT_CPU_ADDR # get cpu address + interruption code - llgf %r4,__LC_EXT_PARAMS # get external parameter - lg %r5,__LC_EXT_PARAMS2-4096(%r1) # get 64 bit external parameter brasl %r14,do_extint j io_return @@ -643,7 +654,7 @@ ENTRY(mcck_int_handler) lg %r12,__LC_THREAD_INFO larl %r13,system_call lmg %r8,%r9,__LC_MCK_OLD_PSW - HANDLE_SIE_INTERCEPT %r14,0 + HANDLE_SIE_INTERCEPT %r14,4 tm __LC_MCCK_CODE,0x80 # system damage? jo mcck_panic # yes -> rest of mcck code invalid lghi %r14,__LC_CPU_TIMER_SAVE_AREA @@ -937,56 +948,50 @@ ENTRY(sie64a) stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers stg %r2,__SF_EMPTY(%r15) # save control block pointer stg %r3,__SF_EMPTY+8(%r15) # save guest register save area - xc __SF_EMPTY+16(8,%r15),__SF_EMPTY+16(%r15) # host id == 0 + xc __SF_EMPTY+16(16,%r15),__SF_EMPTY+16(%r15) # host id & reason lmg %r0,%r13,0(%r3) # load guest gprs 0-13 -# some program checks are suppressing. C code (e.g. do_protection_exception) -# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other -# instructions in the sie_loop should not cause program interrupts. So -# lets use a nop (47 00 00 00) as a landing pad. -# See also HANDLE_SIE_INTERCEPT -rewind_pad: - nop 0 -sie_loop: - lg %r14,__LC_THREAD_INFO # pointer thread_info struct - tm __TI_flags+7(%r14),_TIF_EXIT_SIE - jnz sie_exit lg %r14,__LC_GMAP # get gmap pointer ltgr %r14,%r14 jz sie_gmap lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce sie_gmap: lg %r14,__SF_EMPTY(%r15) # get control block pointer + oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now + tm __SIE_PROG20+3(%r14),1 # last exit... + jnz sie_done LPP __SF_EMPTY(%r15) # set guest id sie 0(%r14) sie_done: LPP __SF_EMPTY+16(%r15) # set host id - lg %r14,__LC_THREAD_INFO # pointer thread_info struct -sie_exit: + ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE lctlg %c1,%c1,__LC_USER_ASCE # load primary asce +# some program checks are suppressing. C code (e.g. do_protection_exception) +# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other +# instructions beween sie64a and sie_done should not cause program +# interrupts. So lets use a nop (47 00 00 00) as a landing pad. +# See also HANDLE_SIE_INTERCEPT +rewind_pad: + nop 0 + .globl sie_exit +sie_exit: lg %r14,__SF_EMPTY+8(%r15) # load guest register save area stmg %r0,%r13,0(%r14) # save guest gprs 0-13 lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers - lghi %r2,0 + lg %r2,__SF_EMPTY+24(%r15) # return exit reason code br %r14 sie_fault: - lctlg %c1,%c1,__LC_USER_ASCE # load primary asce - lg %r14,__LC_THREAD_INFO # pointer thread_info struct - lg %r14,__SF_EMPTY+8(%r15) # load guest register save area - stmg %r0,%r13,0(%r14) # save guest gprs 0-13 - lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers - lghi %r2,-EFAULT - br %r14 + lghi %r14,-EFAULT + stg %r14,__SF_EMPTY+24(%r15) # set exit reason code + j sie_exit .align 8 -.Lsie_loop: - .quad sie_loop -.Lsie_length: - .quad sie_done - sie_loop -.Lhost_id: - .quad 0 +.Lsie_critical: + .quad sie_gmap +.Lsie_critical_length: + .quad sie_done - sie_gmap EX_TABLE(rewind_pad,sie_fault) - EX_TABLE(sie_loop,sie_fault) + EX_TABLE(sie_exit,sie_fault) #endif .section .rodata, "a" |