summaryrefslogtreecommitdiff
path: root/arch/sh/boards/mach-se/7751
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-se/7751')
-rw-r--r--arch/sh/boards/mach-se/7751/Makefile7
-rw-r--r--arch/sh/boards/mach-se/7751/io.c135
-rw-r--r--arch/sh/boards/mach-se/7751/irq.c50
-rw-r--r--arch/sh/boards/mach-se/7751/pci.c147
-rw-r--r--arch/sh/boards/mach-se/7751/setup.c78
5 files changed, 417 insertions, 0 deletions
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
new file mode 100644
index 000000000000..dbc29f3a9de5
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the 7751 SolutionEngine specific parts of the kernel
+#
+
+obj-y := setup.o io.o irq.o
+
+obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
new file mode 100644
index 000000000000..6287ae570319
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for Hitachi 7751 SolutionEngine.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_se.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/addrspace.h>
+
+static inline volatile u16 *port2adr(unsigned int port)
+{
+ if (port >= 0x2000)
+ return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+ maybebadio((unsigned long)port);
+ return (volatile __u16*)port;
+}
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used w/o translation for
+ * compatibility.
+ */
+unsigned char sh7751se_inb(unsigned long port)
+{
+ if (PXSEG(port))
+ return *(volatile unsigned char *)port;
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned char *)pci_ioaddr(port);
+ else
+ return (*port2adr(port)) & 0xff;
+}
+
+unsigned char sh7751se_inb_p(unsigned long port)
+{
+ unsigned char v;
+
+ if (PXSEG(port))
+ v = *(volatile unsigned char *)port;
+ else if (is_pci_ioaddr(port))
+ v = *(volatile unsigned char *)pci_ioaddr(port);
+ else
+ v = (*port2adr(port)) & 0xff;
+ ctrl_delay();
+ return v;
+}
+
+unsigned short sh7751se_inw(unsigned long port)
+{
+ if (PXSEG(port))
+ return *(volatile unsigned short *)port;
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned short *)pci_ioaddr(port);
+ else if (port >= 0x2000)
+ return *port2adr(port);
+ else
+ maybebadio(port);
+ return 0;
+}
+
+unsigned int sh7751se_inl(unsigned long port)
+{
+ if (PXSEG(port))
+ return *(volatile unsigned long *)port;
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned int *)pci_ioaddr(port);
+ else if (port >= 0x2000)
+ return *port2adr(port);
+ else
+ maybebadio(port);
+ return 0;
+}
+
+void sh7751se_outb(unsigned char value, unsigned long port)
+{
+
+ if (PXSEG(port))
+ *(volatile unsigned char *)port = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
+ else
+ *(port2adr(port)) = value;
+}
+
+void sh7751se_outb_p(unsigned char value, unsigned long port)
+{
+ if (PXSEG(port))
+ *(volatile unsigned char *)port = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
+ else
+ *(port2adr(port)) = value;
+ ctrl_delay();
+}
+
+void sh7751se_outw(unsigned short value, unsigned long port)
+{
+ if (PXSEG(port))
+ *(volatile unsigned short *)port = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned short *)pci_ioaddr(port)) = value;
+ else if (port >= 0x2000)
+ *port2adr(port) = value;
+ else
+ maybebadio(port);
+}
+
+void sh7751se_outl(unsigned int value, unsigned long port)
+{
+ if (PXSEG(port))
+ *(volatile unsigned long *)port = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned long*)pci_ioaddr(port)) = value;
+ else
+ maybebadio(port);
+}
+
+void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
+{
+ maybebadio(port);
+}
+
+void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+ maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
new file mode 100644
index 000000000000..5c9847ea1e7c
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/sh/boards/se/7751/irq.c
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <mach-se/mach/se7751.h>
+
+static struct ipr_data ipr_irq_table[] = {
+ { 13, 3, 3, 2 },
+ /* Add additional entries here as drivers are added and tested. */
+};
+
+static unsigned long ipr_offsets[] = {
+ BCR_ILCRA,
+ BCR_ILCRB,
+ BCR_ILCRC,
+ BCR_ILCRD,
+ BCR_ILCRE,
+ BCR_ILCRF,
+ BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-se7751",
+ },
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7751se_IRQ(void)
+{
+ register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
new file mode 100644
index 000000000000..203b2923fe7f
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/pci.c
@@ -0,0 +1,147 @@
+/*
+ * linux/arch/sh/boards/se/7751/pci.c
+ *
+ * Author: Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+#include "../../../drivers/pci/pci-sh7751.h"
+
+#define PCIMCR_MRSET_OFF 0xBFFFFFFF
+#define PCIMCR_RFSH_OFF 0xFFFFFFFB
+
+/*
+ * Only long word accesses of the PCIC's internal local registers and the
+ * configuration registers from the CPU is supported.
+ */
+#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
+#define PCIC_READ(x) readl(PCI_REG(x))
+
+/*
+ * Description: This function sets up and initializes the pcic, sets
+ * up the BARS, maps the DRAM into the address space etc, etc.
+ */
+int __init pcibios_init_platform(void)
+{
+ unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
+ unsigned short bcr2;
+
+ /*
+ * Initialize the slave bus controller on the pcic. The values used
+ * here should not be hardcoded, but they should be taken from the bsc
+ * on the processor, to make this function as generic as possible.
+ * (i.e. Another sbc may usr different SDRAM timing settings -- in order
+ * for the pcic to work, its settings need to be exactly the same.)
+ */
+ bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
+ bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
+ wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
+ wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
+ wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
+ mcr = (*(volatile unsigned long*)(SH7751_MCR));
+
+ bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
+ (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
+
+ bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
+ PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
+ PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
+ PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
+ PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
+ PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
+ mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+ PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
+
+
+ /* Enable all interrupts, so we know what to fix */
+ PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
+ PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
+
+ /* Set up standard PCI config registers */
+ PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
+ PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
+ PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
+ PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
+ PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
+ PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
+ PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
+ PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
+ PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
+ PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
+
+ /* Now turn it on... */
+ PCIC_WRITE(SH7751_PCICR, 0xa5000001);
+
+ /*
+ * Set PCIMBR and PCIIOBR here, assuming a single window
+ * (16M MEM, 256K IO) is enough. If a larger space is
+ * needed, the readx/writex and inx/outx functions will
+ * have to do more (e.g. setting registers for each call).
+ */
+
+ /*
+ * Set the MBR so PCI address is one-to-one with window,
+ * meaning all calls go straight through... use BUG_ON to
+ * catch erroneous assumption.
+ */
+ BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
+
+ PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
+
+ /* Set IOBR for window containing area specified in pci.h */
+ PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
+
+ /* All done, may as well say so... */
+ printk("SH7751 PCI: Finished initialization of the PCI controller\n");
+
+ return 1;
+}
+
+int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+{
+ switch (slot) {
+ case 0: return 13;
+ case 1: return 13; /* AMD Ethernet controller */
+ case 2: return -1;
+ case 3: return -1;
+ case 4: return -1;
+ default:
+ printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
+ return -1;
+ }
+}
+
+static struct resource sh7751_io_resource = {
+ .name = "SH7751 IO",
+ .start = SH7751_PCI_IO_BASE,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+ .name = "SH7751 mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+extern struct pci_ops sh7751_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+ { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+ { NULL, NULL, NULL, 0, 0 },
+};
+
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
new file mode 100644
index 000000000000..50572512e3e8
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/sh/boards/se/7751/setup.c
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+ .bit_pos = heartbeat_bit_pos,
+ .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+ &heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+ return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+__initcall(se7751_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7751se __initmv = {
+ .mv_name = "7751 SolutionEngine",
+ .mv_nr_irqs = 72,
+
+ .mv_inb = sh7751se_inb,
+ .mv_inw = sh7751se_inw,
+ .mv_inl = sh7751se_inl,
+ .mv_outb = sh7751se_outb,
+ .mv_outw = sh7751se_outw,
+ .mv_outl = sh7751se_outl,
+
+ .mv_inb_p = sh7751se_inb_p,
+ .mv_inw_p = sh7751se_inw,
+ .mv_inl_p = sh7751se_inl,
+ .mv_outb_p = sh7751se_outb_p,
+ .mv_outw_p = sh7751se_outw,
+ .mv_outl_p = sh7751se_outl,
+
+ .mv_insl = sh7751se_insl,
+ .mv_outsl = sh7751se_outsl,
+
+ .mv_init_irq = init_7751se_IRQ,
+};