summaryrefslogtreecommitdiff
path: root/arch/tile/include/asm/pci.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile/include/asm/pci.h')
-rw-r--r--arch/tile/include/asm/pci.h128
1 files changed, 128 insertions, 0 deletions
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
new file mode 100644
index 000000000000..b0c15da2d5d5
--- /dev/null
+++ b/arch/tile/include/asm/pci.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PCI_H
+#define _ASM_TILE_PCI_H
+
+#include <asm/pci-bridge.h>
+
+/*
+ * The hypervisor maps the entirety of CPA-space as bus addresses, so
+ * bus addresses are physical addresses. The networking and block
+ * device layers use this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS 1
+
+struct pci_controller *pci_bus_to_hose(int bus);
+unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
+int __init tile_pci_init(void);
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
+
+int __devinit _tile_cfg_read(struct pci_controller *hose,
+ int bus,
+ int slot,
+ int function,
+ int offset,
+ int size,
+ u32 *val);
+int __devinit _tile_cfg_write(struct pci_controller *hose,
+ int bus,
+ int slot,
+ int function,
+ int offset,
+ int size,
+ u32 val);
+
+/*
+ * These are used to to config reads and writes in the early stages of
+ * setup before the driver infrastructure has been set up enough to be
+ * able to do config reads and writes.
+ */
+#define early_cfg_read(where, size, value) \
+ _tile_cfg_read(controller, \
+ current_bus, \
+ pci_slot, \
+ pci_fn, \
+ where, \
+ size, \
+ value)
+
+#define early_cfg_write(where, size, value) \
+ _tile_cfg_write(controller, \
+ current_bus, \
+ pci_slot, \
+ pci_fn, \
+ where, \
+ size, \
+ value)
+
+
+
+#define PCICFG_BYTE 1
+#define PCICFG_WORD 2
+#define PCICFG_DWORD 4
+
+#define TILE_NUM_PCIE 2
+
+#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
+
+/*
+ * This decides whether to display the domain number in /proc.
+ */
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ return 1;
+}
+
+/*
+ * I/O space is currently not supported.
+ */
+
+#define TILE_PCIE_LOWER_IO 0x0
+#define TILE_PCIE_UPPER_IO 0x10000
+#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF
+
+#define _PAGE_NO_CACHE 0
+#define _PAGE_GUARDED 0
+
+
+#define pcibios_assign_all_busses() pci_assign_all_buses
+extern int pci_assign_all_buses;
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+
+#define PCIBIOS_MIN_MEM 0
+#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+extern int blade_pci;
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
+
+#endif /* _ASM_TILE_PCI_H */