summaryrefslogtreecommitdiff
path: root/arch/tile/lib/cacheflush.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile/lib/cacheflush.c')
-rw-r--r--arch/tile/lib/cacheflush.c30
1 files changed, 27 insertions, 3 deletions
diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c
index 8928aace7a64..db4fb89e12d8 100644
--- a/arch/tile/lib/cacheflush.c
+++ b/arch/tile/lib/cacheflush.c
@@ -39,7 +39,21 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh)
{
char *p, *base;
size_t step_size, load_count;
+
+ /*
+ * On TILEPro the striping granularity is a fixed 8KB; on
+ * TILE-Gx it is configurable, and we rely on the fact that
+ * the hypervisor always configures maximum striping, so that
+ * bits 9 and 10 of the PA are part of the stripe function, so
+ * every 512 bytes we hit a striping boundary.
+ *
+ */
+#ifdef __tilegx__
+ const unsigned long STRIPE_WIDTH = 512;
+#else
const unsigned long STRIPE_WIDTH = 8192;
+#endif
+
#ifdef __tilegx__
/*
* On TILE-Gx, we must disable the dstream prefetcher before doing
@@ -74,7 +88,7 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh)
* memory, that one load would be sufficient, but since we may
* be, we also need to back up to the last load issued to
* another memory controller, which would be the point where
- * we crossed an 8KB boundary (the granularity of striping
+ * we crossed a "striping" boundary (the granularity of striping
* across memory controllers). Keep backing up and doing this
* until we are before the beginning of the buffer, or have
* hit all the controllers.
@@ -88,12 +102,22 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh)
* every cache line on a full memory stripe on each
* controller" that we simply do that, to simplify the logic.
*
- * FIXME: See bug 9535 for some issues with this code.
+ * On TILE-Gx the hash-for-home function is much more complex,
+ * with the upshot being we can't readily guarantee we have
+ * hit both entries in the 128-entry AMT that were hit by any
+ * load in the entire range, so we just re-load them all.
+ * With larger buffers, we may want to consider using a hypervisor
+ * trap to issue loads directly to each hash-for-home tile for
+ * each controller (doing it from Linux would trash the TLB).
*/
if (hfh) {
step_size = L2_CACHE_BYTES;
+#ifdef __tilegx__
+ load_count = (size + L2_CACHE_BYTES - 1) / L2_CACHE_BYTES;
+#else
load_count = (STRIPE_WIDTH / L2_CACHE_BYTES) *
(1 << CHIP_LOG_NUM_MSHIMS());
+#endif
} else {
step_size = STRIPE_WIDTH;
load_count = (1 << CHIP_LOG_NUM_MSHIMS());
@@ -109,7 +133,7 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh)
/* Figure out how far back we need to go. */
base = p - (step_size * (load_count - 2));
- if ((long)base < (long)buffer)
+ if ((unsigned long)base < (unsigned long)buffer)
base = buffer;
/*