diff options
Diffstat (limited to 'arch')
43 files changed, 189 insertions, 235 deletions
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 67ea99ef6521..dd3fbd6766e1 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -33,10 +33,6 @@ __XScale_start: bic r0, r0, #0x1000 @ clear Icache mcr p15, 0, r0, c1, c0, 0 -#ifdef CONFIG_ARCH_COTULLA_IDP - mov r7, #MACH_TYPE_COTULLA_IDP -#endif - #ifdef CONFIG_ARCH_IXP2000 mov r1, #-1 mov r0, #0xd6000000 diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 6d4416a4f378..f5851d1adc25 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -59,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = { [2] = { .start = CMX270_ETHIRQ, .end = CMX270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index edc4f07a230d..9c57700ee5c2 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -50,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = { [2] = { .start = EM_X270_ETHIRQ, .end = EM_X270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index c2cbd66db814..ab4a9f579913 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -467,8 +467,8 @@ static struct platform_device *devices[] __initdata = { static void tosa_poweroff(void) { - pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT); - GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET); + gpio_direction_output(TOSA_GPIO_ON_RESET, 0); + gpio_set_value(TOSA_GPIO_ON_RESET, 1); mdelay(1000); arm_machine_restart('h'); diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S index 81ba28ad2207..53deeb5d7e87 100644 --- a/arch/frv/kernel/cmode.S +++ b/arch/frv/kernel/cmode.S @@ -1,7 +1,7 @@ /* cmode.S: clock mode management * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S index c9b2d51ab9ad..f67bf73cd2cc 100644 --- a/arch/frv/kernel/sleep.S +++ b/arch/frv/kernel/sleep.S @@ -1,7 +1,7 @@ /* sleep.S: power saving mode entry * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c index 4985466b1a7c..64ee58d748be 100644 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -1,7 +1,7 @@ /* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index dca50da9ffd0..8e2a0f5faf53 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:41 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index c3cd5b749d2c..e2d511e2a1d1 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:42 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 073ae4bbe264..6e20d656adaf 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:43 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 0789ede2e9ee..a0a9b30bb502 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:45 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 3e140bf49b22..6778041de262 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:46 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index ba3a91792cbf..7cd375740348 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:47 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 4d23f99227f9..0747fa3984df 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:42:31 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 188847fed824..e7a8246840b5 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:49 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 983e53d990c8..ab536eb172bb 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:50 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 7707f3fb0a70..e05be687b500 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:51 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index a765f6f15d2c..296340d2b315 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:53 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 431513937498..8d3a416c92bf 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:54 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c index 46f8ee0e2657..043429d17c5f 100644 --- a/arch/mips/au1000/common/clocks.c +++ b/arch/mips/au1000/common/clocks.c @@ -45,6 +45,7 @@ unsigned int get_au1x00_speed(void) { return au1x00_clock; } +EXPORT_SYMBOL(get_au1x00_speed); /* * The UART baud base is not known at compile time ... if diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index 42d555236de1..601ee9180ee4 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -216,6 +216,17 @@ u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) } EXPORT_SYMBOL(au1xxx_ddma_add_device); +void au1xxx_ddma_del_device(u32 devid) +{ + dbdev_tab_t *p = find_dbdev_id(devid); + + if (p != NULL) { + memset(p, 0, sizeof(dbdev_tab_t)); + p->dev_id = ~0; + } +} +EXPORT_SYMBOL(au1xxx_ddma_del_device); + /* Allocate a channel and return a non-zero descriptor if successful. */ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, void (*callback)(int, void *), void *callparam) diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index cc0244036aec..65e46a6d4178 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o -obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cb8b0e2c7954..f9165d1a17bf 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -88,15 +88,17 @@ static void show_raw_backtrace(unsigned long reg29) #ifdef CONFIG_KALLSYMS printk("\n"); #endif -#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000) - if (IS_KVA01(sp)) { - while (!kstack_end(sp)) { - addr = *sp++; - if (__kernel_text_address(addr)) - print_ip_sym(addr); + while (!kstack_end(sp)) { + unsigned long __user *p = + (unsigned long __user *)(unsigned long)sp++; + if (__get_user(addr, p)) { + printk(" (Bad stack address)"); + break; } - printk("\n"); + if (__kernel_text_address(addr)) + print_ip_sym(addr); } + printk("\n"); } #ifdef CONFIG_KALLSYMS diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 008fd82b5840..fe2cac1b4514 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -58,27 +58,8 @@ static int mips_cpu_timer_irq; static int mips_cpu_perf_irq; extern int cp0_perfcount_irq; -DEFINE_PER_CPU(unsigned int, tickcount); -#define tickcount_this_cpu __get_cpu_var(tickcount) -static unsigned long ledbitmask; - static void mips_timer_dispatch(void) { -#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) - /* - * Yes, this is very tacky, won't work as expected with SMTC and - * dyntick will break it, - * but it gives me a nice warm feeling during debug - */ -#define LEDBAR 0xbf000408 - if (tickcount_this_cpu++ >= HZ) { - tickcount_this_cpu = 0; - change_bit(smp_processor_id(), &ledbitmask); - smp_wmb(); /* Make sure every one else sees the change */ - /* This will pick up any recent changes made by other CPU's */ - *(unsigned int *)LEDBAR = ledbitmask; - } -#endif do_IRQ(mips_cpu_timer_irq); } diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index d827d6144369..cab81f42eee5 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -310,8 +310,8 @@ void __cpuinit build_clear_page(void) if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) uasm_i_lui(&buf, AT, 0xa000); - off = min(8, pref_bias_clear_store / cache_line_size) * - cache_line_size; + off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size) + * cache_line_size : 0; while (off) { build_clear_pref(&buf, -off); off -= cache_line_size; @@ -454,12 +454,14 @@ void __cpuinit build_copy_page(void) if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) uasm_i_lui(&buf, AT, 0xa000); - off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size; + off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + cache_line_size : 0; while (off) { build_copy_load_pref(&buf, -off); off -= cache_line_size; } - off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size; + off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); off -= cache_line_size; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 382738ca8a0b..76da73a5ab3c 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -224,8 +224,9 @@ static u32 final_handler[64] __cpuinitdata; static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p) { switch (current_cpu_type()) { - /* Found by experiment: R4600 v2.0 needs this, too. */ + /* Found by experiment: R4600 v2.0/R4700 needs this, too. */ case CPU_R4600: + case CPU_R4700: case CPU_R5000: case CPU_R5000A: case CPU_NEVADA: diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c index 1fa09929cd7a..b46b3e211775 100644 --- a/arch/mips/pci/ops-bridge.c +++ b/arch/mips/pci/ops-bridge.c @@ -14,6 +14,22 @@ #include <asm/sn/sn0/hub.h> /* + * Most of the IOC3 PCI config register aren't present + * we emulate what is needed for a normal PCI enumeration + */ +static u32 emulate_ioc3_cfg(int where, int size) +{ + if (size == 1 && where == 0x3d) + return 0x01; + else if (size == 2 && where == 0x3c) + return 0x0100; + else if (size == 4 && where == 0x3c) + return 0x00000100; + + return 0; +} + +/* * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is * not really documented, so right now I can't write code which uses it. * Therefore we use type 0 accesses for now even though they won't work @@ -64,7 +80,7 @@ oh_my_gawd: * generic PCI code a chance to look at the wrong register. */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { - *value = 0; + *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } @@ -127,7 +143,7 @@ oh_my_gawd: * generic PCI code a chance to look at the wrong register. */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { - *value = 0; + *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bb64828a92fe..a18516925cdd 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -47,6 +47,9 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) static int num_bridges = 0; bridge_t *bridge; int slot; + extern int pci_probe_only; + + pci_probe_only = 1; printk("a bridge\n"); @@ -100,6 +103,11 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) */ bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP; +#ifdef CONFIG_PAGE_SIZE_4KB + bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; +#else /* 16kB or larger */ + bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE; +#endif /* * Hmm... IRIX sets additional bits in the address which diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 7093e7c573a4..4a500e8cd3cc 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -161,27 +161,6 @@ cnodeid_t get_compact_nodeid(void) return NASID_TO_COMPACT_NODEID(get_nasid()); } -/* Extracted from the IOC3 meta driver. FIXME. */ -static inline void ioc3_sio_init(void) -{ - struct ioc3 *ioc3; - nasid_t nid; - long loops; - - nid = get_nasid(); - ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base; - - ioc3->sscr_a = 0; /* PIO mode for uarta. */ - ioc3->sscr_b = 0; /* PIO mode for uartb. */ - ioc3->sio_iec = ~0; - ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT); - - loops=1000000; while(loops--); - ioc3->sregs.uarta.iu_fcr = 0; - ioc3->sregs.uartb.iu_fcr = 0; - loops=1000000; while(loops--); -} - static inline void ioc3_eth_init(void) { struct ioc3 *ioc3; @@ -234,7 +213,6 @@ void __init plat_mem_setup(void) panic("Kernel compiled for N mode."); #endif - ioc3_sio_init(); ioc3_eth_init(); per_cpu_init(); diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index bf438d02366e..42cd10956306 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -33,10 +33,6 @@ #define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) #define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) -#define SLOT_IGNORED 0xffff - -static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES]; -static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS]; static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES]; struct node_data *__node_data[MAX_COMPACT_NODES]; @@ -267,51 +263,6 @@ static pfn_t __init slot_getbasepfn(cnodeid_t cnode, int slot) return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT); } -/* - * Return the number of pages of memory provided by the given slot - * on the specified node. - */ -static pfn_t __init slot_getsize(cnodeid_t node, int slot) -{ - return (pfn_t) slot_psize_cache[node][slot]; -} - -/* - * Return highest slot filled - */ -static int __init node_getlastslot(cnodeid_t node) -{ - return (int) slot_lastfilled_cache[node]; -} - -/* - * Return the pfn of the last free page of memory on a node. - */ -static pfn_t __init node_getmaxclick(cnodeid_t node) -{ - pfn_t slot_psize; - int slot; - - /* - * Start at the top slot. When we find a slot with memory in it, - * that's the winner. - */ - for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) { - if ((slot_psize = slot_getsize(node, slot))) { - if (slot_psize == SLOT_IGNORED) - continue; - /* Return the basepfn + the slot size, minus 1. */ - return slot_getbasepfn(node, slot) + slot_psize - 1; - } - } - - /* - * If there's no memory on the node, return 0. This is likely - * to cause problems. - */ - return 0; -} - static pfn_t __init slot_psize_compute(cnodeid_t node, int slot) { nasid_t nasid; @@ -404,13 +355,13 @@ static void __init mlreset(void) static void __init szmem(void) { pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */ - int slot, ignore; + int slot; cnodeid_t node; num_physpages = 0; for_each_online_node(node) { - ignore = nodebytes = 0; + nodebytes = 0; for (slot = 0; slot < MAX_MEM_SLOTS; slot++) { slot_psize = slot_psize_compute(node, slot); if (slot == 0) @@ -420,21 +371,20 @@ static void __init szmem(void) * kernel text. */ nodebytes += (1LL << SLOT_SHIFT); + + if (!slot_psize) + continue; + if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) > - (slot0sz << PAGE_SHIFT)) - ignore = 1; - if (ignore && slot_psize) { + (slot0sz << PAGE_SHIFT)) { printk("Ignoring slot %d onwards on node %d\n", slot, node); - slot_psize_cache[node][slot] = SLOT_IGNORED; slot = MAX_MEM_SLOTS; continue; } num_physpages += slot_psize; - slot_psize_cache[node][slot] = - (unsigned short) slot_psize; - if (slot_psize) - slot_lastfilled_cache[node] = slot; + add_active_range(node, slot_getbasepfn(node, slot), + slot_getbasepfn(node, slot) + slot_psize); } } } @@ -442,18 +392,20 @@ static void __init szmem(void) static void __init node_mem_init(cnodeid_t node) { pfn_t slot_firstpfn = slot_getbasepfn(node, 0); - pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0); pfn_t slot_freepfn = node_getfirstfree(node); - struct pglist_data *pd; unsigned long bootmap_size; + pfn_t start_pfn, end_pfn; + + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); /* * Allocate the node data structures on the node first. */ __node_data[node] = __va(slot_freepfn << PAGE_SHIFT); - pd = NODE_DATA(node); - pd->bdata = &plat_node_bdata[node]; + NODE_DATA(node)->bdata = &plat_node_bdata[node]; + NODE_DATA(node)->node_start_pfn = start_pfn; + NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn; cpus_clear(hub_data(node)->h_cpus); @@ -461,12 +413,12 @@ static void __init node_mem_init(cnodeid_t node) sizeof(struct hub_data)); bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn, - slot_firstpfn, slot_lastpfn); - free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, - (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT); + start_pfn, end_pfn); + free_bootmem_with_active_regions(node, end_pfn); reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size, BOOTMEM_DEFAULT); + sparse_memory_present_with_active_regions(node); } /* @@ -515,16 +467,15 @@ void __init paging_init(void) pagetable_init(); for_each_online_node(node) { - pfn_t start_pfn = slot_getbasepfn(node, 0); - pfn_t end_pfn = node_getmaxclick(node) + 1; + pfn_t start_pfn, end_pfn; - zones_size[ZONE_NORMAL] = end_pfn - start_pfn; - free_area_init_node(node, NODE_DATA(node), - zones_size, start_pfn, NULL); + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); if (end_pfn > max_low_pfn) max_low_pfn = end_pfn; } + zones_size[ZONE_NORMAL] = max_low_pfn; + free_area_init_nodes(zones_size); } void __init mem_init(void) @@ -535,34 +486,10 @@ void __init mem_init(void) high_memory = (void *) __va(num_physpages << PAGE_SHIFT); for_each_online_node(node) { - unsigned slot, numslots; - struct page *end, *p; - /* * This will free up the bootmem, ie, slot 0 memory. */ totalram_pages += free_all_bootmem_node(NODE_DATA(node)); - - /* - * We need to manually do the other slots. - */ - numslots = node_getlastslot(node); - for (slot = 1; slot <= numslots; slot++) { - p = nid_page_nr(node, slot_getbasepfn(node, slot) - - slot_getbasepfn(node, 0)); - - /* - * Free valid memory in current slot. - */ - for (end = p + slot_getsize(node, slot); p < end; p++) { - /* if (!page_is_ram(pgnr)) continue; */ - /* commented out until page_is_ram works */ - ClearPageReserved(p); - init_page_count(p); - __free_page(p); - totalram_pages++; - } - } } totalram_pages -= setup_zero_pages(); /* This comes from node 0 */ diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index f15fc93d6b35..ba5cdebeaf0d 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -176,11 +176,14 @@ static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action) static void __cpuinit ip27_init_secondary(void) { per_cpu_init(); - local_irq_enable(); } static void __cpuinit ip27_smp_finish(void) { + extern void hub_rt_clock_event_init(void); + + hub_rt_clock_event_init(); + local_irq_enable(); } static void __init ip27_cpus_done(void) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 9cebc9e7da63..8b4e854af925 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -160,10 +160,13 @@ static void rt_set_mode(enum clock_event_mode mode, int rt_timer_irq; +static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); +static DEFINE_PER_CPU(char [11], hub_rt_name); + static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) { - struct clock_event_device *cd = dev_id; unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); int slice = cputoslice(cpu); /* @@ -192,10 +195,7 @@ struct irqaction hub_rt_irqaction = { #define NSEC_PER_CYCLE 800 #define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE) -static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); -static DEFINE_PER_CPU(char [11], hub_rt_name); - -static void __cpuinit hub_rt_clock_event_init(void) +void __cpuinit hub_rt_clock_event_init(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); @@ -203,17 +203,16 @@ static void __cpuinit hub_rt_clock_event_init(void) int irq = rt_timer_irq; sprintf(name, "hub-rt %d", cpu); - cd->name = "HUB-RT", - cd->features = CLOCK_EVT_FEAT_ONESHOT, + cd->name = name; + cd->features = CLOCK_EVT_FEAT_ONESHOT; clockevent_set_clock(cd, CYCLES_PER_SEC); cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd); cd->min_delta_ns = clockevent_delta2ns(0x300, cd); - cd->rating = 200, - cd->irq = irq, - cd->cpumask = cpumask_of_cpu(cpu), - cd->rating = 300, - cd->set_next_event = rt_next_event, - cd->set_mode = rt_set_mode, + cd->rating = 200; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = rt_next_event; + cd->set_mode = rt_set_mode; clockevents_register_device(cd); } @@ -261,6 +260,7 @@ void __init plat_time_init(void) { hub_rt_clocksource_init(); hub_rt_clock_event_global_init(); + hub_rt_clock_event_init(); } void __cpuinit cpu_time_init(void) @@ -281,7 +281,6 @@ void __cpuinit cpu_time_init(void) printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed); - hub_rt_clock_event_init(); set_c0_status(SRB_TIMOCLK); } diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 3a7054e2bb75..019657c110b6 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -432,7 +432,7 @@ static struct i2c_driver_device i2c_devices[] __initdata = { {"dallas,ds1339", "ds1339"}, {"dallas,ds1340", "ds1340"}, {"stm,m41t00", "m41t00"}, - {"dallas,ds1374", "rtc-ds1374"}, + {"dallas,ds1374", "ds1374"}, }; static int __init of_find_i2c_driver(struct device_node *node, diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 44ad1607be2d..b58fb8941d8d 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -49,7 +49,6 @@ #include "irq_user.h" #include "irq_kern.h" #include "ubd_user.h" -#include "kern_util.h" #include "os.h" #include "mem.h" #include "mem_kern.h" diff --git a/arch/um/include/os.h b/arch/um/include/os.h index e2716ac8889a..db5be46e3e18 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -299,6 +299,6 @@ extern int os_arch_prctl(int pid, int code, unsigned long *addr); extern int get_pty(void); /* sys-$ARCH/task_size.c */ -extern unsigned long os_get_task_size(void); +extern unsigned long os_get_top_address(void); #endif diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 9db85b2ce698..8d84250324b3 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -274,7 +274,7 @@ int __init linux_main(int argc, char **argv) if (have_root == 0) add_arg(DEFAULT_COMMAND_LINE); - host_task_size = os_get_task_size(); + host_task_size = os_get_top_address(); /* * TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps * out diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index 74ca7aabf4e1..30860b89ec58 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -7,6 +7,7 @@ #include <unistd.h> #include <errno.h> #include <sched.h> +#include <linux/limits.h> #include <sys/socket.h> #include <sys/wait.h> #include "kern_constants.h" diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index 6be028ca1817..172ad8f72e12 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -55,7 +55,7 @@ static int ptrace_dump_regs(int pid) * Signals that are OK to receive in the stub - we'll just continue it. * SIGWINCH will happen when UML is inside a detached screen. */ -#define STUB_SIG_MASK (1 << SIGVTALRM) +#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH)) /* Signals that the stub will finish with - anything else is an error */ #define STUB_DONE_MASK (1 << SIGTRAP) diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c index ccb49b0aff59..be04c1e183bf 100644 --- a/arch/um/os-Linux/sys-i386/task_size.c +++ b/arch/um/os-Linux/sys-i386/task_size.c @@ -63,7 +63,7 @@ static int page_ok(unsigned long page) return ok; } -unsigned long os_get_task_size(void) +unsigned long os_get_top_address(void) { struct sigaction sa, old; unsigned long bottom = 0; @@ -76,9 +76,9 @@ unsigned long os_get_task_size(void) * hosts, but shouldn't hurt otherwise. */ unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT; - unsigned long test; + unsigned long test, original; - printf("Locating the top of the address space ... "); + printf("Locating the bottom of the address space ... "); fflush(stdout); /* @@ -89,16 +89,31 @@ unsigned long os_get_task_size(void) sigemptyset(&sa.sa_mask); sa.sa_flags = SA_NODEFER; if (sigaction(SIGSEGV, &sa, &old)) { - perror("os_get_task_size"); + perror("os_get_top_address"); exit(1); } - if (!page_ok(bottom)) { - fprintf(stderr, "Address 0x%x no good?\n", - bottom << UM_KERN_PAGE_SHIFT); + /* Manually scan the address space, bottom-up, until we find + * the first valid page (or run out of them). + */ + for (bottom = 0; bottom < top; bottom++) { + if (page_ok(bottom)) + break; + } + + /* If we've got this far, we ran out of pages. */ + if (bottom == top) { + fprintf(stderr, "Unable to determine bottom of address " + "space.\n"); exit(1); } + printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT); + printf("Locating the top of the address space ... "); + fflush(stdout); + + original = bottom; + /* This could happen with a 4G/4G split */ if (page_ok(top)) goto out; @@ -114,7 +129,7 @@ unsigned long os_get_task_size(void) out: /* Restore the old SIGSEGV handling */ if (sigaction(SIGSEGV, &old, NULL)) { - perror("os_get_task_size"); + perror("os_get_top_address"); exit(1); } top <<= UM_KERN_PAGE_SHIFT; diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c index fad6f57f8ee3..26a0dd1f349c 100644 --- a/arch/um/os-Linux/sys-x86_64/task_size.c +++ b/arch/um/os-Linux/sys-x86_64/task_size.c @@ -1,4 +1,4 @@ -unsigned long os_get_task_size(unsigned long shift) +unsigned long os_get_top_address(unsigned long shift) { /* The old value of CONFIG_TOP_ADDR */ return 0x7fc0000000; diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index bee98f466d66..dec5678fc17f 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -106,6 +106,10 @@ static void deliver_alarm(void) unsigned long long this_tick = os_nsecs(); int one_tick = UM_NSEC_PER_SEC / UM_HZ; + /* Protection against the host's time going backwards */ + if ((last_tick != 0) && (this_tick < last_tick)) + this_tick = last_tick; + if (last_tick == 0) last_tick = this_tick - one_tick; @@ -148,6 +152,9 @@ static int after_sleep_interval(struct timespec *ts) start_usecs = usec; start_usecs -= skew / UM_NSEC_PER_USEC; + if (start_usecs < 0) + start_usecs = 0; + tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC, .tv_usec = start_usecs % UM_USEC_PER_SEC }); interval = ((struct itimerval) { { 0, usec }, tv }); diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c index 6604673a849d..1db2fce00948 100644 --- a/arch/um/sys-x86_64/ksyms.c +++ b/arch/um/sys-x86_64/ksyms.c @@ -3,5 +3,9 @@ #include <asm/checksum.h> /*XXX: we need them because they would be exported by x86_64 */ +#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4 +EXPORT_SYMBOL(memcpy); +#else EXPORT_SYMBOL(__memcpy); +#endif EXPORT_SYMBOL(csum_partial); diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index ac1e31ba4795..18363374d51a 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -6,15 +6,19 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" config NONPROMISC_DEVMEM - bool "Disable promiscuous /dev/mem" + bool "Filter access to /dev/mem" help - The /dev/mem file by default only allows userspace access to PCI - space and the BIOS code and data regions. This is sufficient for - dosemu and X and all common users of /dev/mem. With this config - option, you allow userspace access to all of memory, including - kernel and userspace memory. Accidental access to this is - obviously disasterous, but specific access can be used by people - debugging the kernel. + If this option is left off, you allow userspace access to all + of memory, including kernel and userspace memory. Accidental + access to this is obviously disastrous, but specific access can + be used by people debugging the kernel. + + If this option is switched on, the /dev/mem file only allows + userspace access to PCI space and the BIOS code and data regions. + This is sufficient for dosemu and X and all common users of + /dev/mem. + + If in doubt, say Y. config EARLY_PRINTK bool "Early printk" if EMBEDDED |