summaryrefslogtreecommitdiff
path: root/drivers/acpi/acpica/tbfadt.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi/acpica/tbfadt.c')
-rw-r--r--drivers/acpi/acpica/tbfadt.c610
1 files changed, 610 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
new file mode 100644
index 000000000000..87f22e68c6d6
--- /dev/null
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -0,0 +1,610 @@
+/******************************************************************************
+ *
+ * Module Name: tbfadt - FADT table utilities
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2008, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/accommon.h>
+#include <acpi/actables.h>
+
+#define _COMPONENT ACPI_TABLES
+ACPI_MODULE_NAME("tbfadt")
+
+/* Local prototypes */
+static inline void
+acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
+ u8 space_id, u8 byte_width, u64 address);
+
+static void acpi_tb_convert_fadt(void);
+
+static void acpi_tb_validate_fadt(void);
+
+/* Table for conversion of FADT to common internal format and FADT validation */
+
+typedef struct acpi_fadt_info {
+ char *name;
+ u8 address64;
+ u8 address32;
+ u8 length;
+ u8 default_length;
+ u8 type;
+
+} acpi_fadt_info;
+
+#define ACPI_FADT_REQUIRED 1
+#define ACPI_FADT_SEPARATE_LENGTH 2
+
+static struct acpi_fadt_info fadt_info_table[] = {
+ {"Pm1aEventBlock",
+ ACPI_FADT_OFFSET(xpm1a_event_block),
+ ACPI_FADT_OFFSET(pm1a_event_block),
+ ACPI_FADT_OFFSET(pm1_event_length),
+ ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */
+ ACPI_FADT_REQUIRED},
+
+ {"Pm1bEventBlock",
+ ACPI_FADT_OFFSET(xpm1b_event_block),
+ ACPI_FADT_OFFSET(pm1b_event_block),
+ ACPI_FADT_OFFSET(pm1_event_length),
+ ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */
+ 0},
+
+ {"Pm1aControlBlock",
+ ACPI_FADT_OFFSET(xpm1a_control_block),
+ ACPI_FADT_OFFSET(pm1a_control_block),
+ ACPI_FADT_OFFSET(pm1_control_length),
+ ACPI_PM1_REGISTER_WIDTH,
+ ACPI_FADT_REQUIRED},
+
+ {"Pm1bControlBlock",
+ ACPI_FADT_OFFSET(xpm1b_control_block),
+ ACPI_FADT_OFFSET(pm1b_control_block),
+ ACPI_FADT_OFFSET(pm1_control_length),
+ ACPI_PM1_REGISTER_WIDTH,
+ 0},
+
+ {"Pm2ControlBlock",
+ ACPI_FADT_OFFSET(xpm2_control_block),
+ ACPI_FADT_OFFSET(pm2_control_block),
+ ACPI_FADT_OFFSET(pm2_control_length),
+ ACPI_PM2_REGISTER_WIDTH,
+ ACPI_FADT_SEPARATE_LENGTH},
+
+ {"PmTimerBlock",
+ ACPI_FADT_OFFSET(xpm_timer_block),
+ ACPI_FADT_OFFSET(pm_timer_block),
+ ACPI_FADT_OFFSET(pm_timer_length),
+ ACPI_PM_TIMER_WIDTH,
+ ACPI_FADT_REQUIRED},
+
+ {"Gpe0Block",
+ ACPI_FADT_OFFSET(xgpe0_block),
+ ACPI_FADT_OFFSET(gpe0_block),
+ ACPI_FADT_OFFSET(gpe0_block_length),
+ 0,
+ ACPI_FADT_SEPARATE_LENGTH},
+
+ {"Gpe1Block",
+ ACPI_FADT_OFFSET(xgpe1_block),
+ ACPI_FADT_OFFSET(gpe1_block),
+ ACPI_FADT_OFFSET(gpe1_block_length),
+ 0,
+ ACPI_FADT_SEPARATE_LENGTH}
+};
+
+#define ACPI_FADT_INFO_ENTRIES (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_init_generic_address
+ *
+ * PARAMETERS: generic_address - GAS struct to be initialized
+ * byte_width - Width of this register
+ * Address - Address of the register
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Initialize a Generic Address Structure (GAS)
+ * See the ACPI specification for a full description and
+ * definition of this structure.
+ *
+ ******************************************************************************/
+
+static inline void
+acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
+ u8 space_id, u8 byte_width, u64 address)
+{
+
+ /*
+ * The 64-bit Address field is non-aligned in the byte packed
+ * GAS struct.
+ */
+ ACPI_MOVE_64_TO_64(&generic_address->address, &address);
+
+ /* All other fields are byte-wide */
+
+ generic_address->space_id = space_id;
+ generic_address->bit_width = (u8)ACPI_MUL_8(byte_width);
+ generic_address->bit_offset = 0;
+ generic_address->access_width = 0; /* Access width ANY */
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_parse_fadt
+ *
+ * PARAMETERS: table_index - Index for the FADT
+ * Flags - Flags
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Initialize the FADT, DSDT and FACS tables
+ * (FADT contains the addresses of the DSDT and FACS)
+ *
+ ******************************************************************************/
+
+void acpi_tb_parse_fadt(u32 table_index, u8 flags)
+{
+ u32 length;
+ struct acpi_table_header *table;
+
+ /*
+ * The FADT has multiple versions with different lengths,
+ * and it contains pointers to both the DSDT and FACS tables.
+ *
+ * Get a local copy of the FADT and convert it to a common format
+ * Map entire FADT, assumed to be smaller than one page.
+ */
+ length = acpi_gbl_root_table_list.tables[table_index].length;
+
+ table =
+ acpi_os_map_memory(acpi_gbl_root_table_list.tables[table_index].
+ address, length);
+ if (!table) {
+ return;
+ }
+
+ /*
+ * Validate the FADT checksum before we copy the table. Ignore
+ * checksum error as we want to try to get the DSDT and FACS.
+ */
+ (void)acpi_tb_verify_checksum(table, length);
+
+ /* Obtain a local copy of the FADT in common ACPI 2.0+ format */
+
+ acpi_tb_create_local_fadt(table, length);
+
+ /* All done with the real FADT, unmap it */
+
+ acpi_os_unmap_memory(table, length);
+
+ /* Obtain the DSDT and FACS tables via their addresses within the FADT */
+
+ acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt,
+ flags, ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT);
+
+ acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs,
+ flags, ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_create_local_fadt
+ *
+ * PARAMETERS: Table - Pointer to BIOS FADT
+ * Length - Length of the table
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Get a local copy of the FADT and convert it to a common format.
+ * Performs validation on some important FADT fields.
+ *
+ * NOTE: We create a local copy of the FADT regardless of the version.
+ *
+ ******************************************************************************/
+
+void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
+{
+
+ /*
+ * Check if the FADT is larger than the largest table that we expect
+ * (the ACPI 2.0/3.0 version). If so, truncate the table, and issue
+ * a warning.
+ */
+ if (length > sizeof(struct acpi_table_fadt)) {
+ ACPI_WARNING((AE_INFO,
+ "FADT (revision %u) is longer than ACPI 2.0 version, "
+ "truncating length 0x%X to 0x%zX",
+ table->revision, (unsigned)length,
+ sizeof(struct acpi_table_fadt)));
+ }
+
+ /* Clear the entire local FADT */
+
+ ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt));
+
+ /* Copy the original FADT, up to sizeof (struct acpi_table_fadt) */
+
+ ACPI_MEMCPY(&acpi_gbl_FADT, table,
+ ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
+
+ /*
+ * 1) Convert the local copy of the FADT to the common internal format
+ * 2) Validate some of the important values within the FADT
+ */
+ acpi_tb_convert_fadt();
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_convert_fadt
+ *
+ * PARAMETERS: None, uses acpi_gbl_FADT
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Converts all versions of the FADT to a common internal format.
+ * Expand all 32-bit addresses to 64-bit.
+ *
+ * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt),
+ * and must contain a copy of the actual FADT.
+ *
+ * ACPICA will use the "X" fields of the FADT for all addresses.
+ *
+ * "X" fields are optional extensions to the original V1.0 fields. Even if
+ * they are present in the structure, they can be optionally not used by
+ * setting them to zero. Therefore, we must selectively expand V1.0 fields
+ * if the corresponding X field is zero.
+ *
+ * For ACPI 1.0 FADTs, all address fields are expanded to the corresponding
+ * "X" fields.
+ *
+ * For ACPI 2.0 FADTs, any "X" fields that are NULL are filled in by
+ * expanding the corresponding ACPI 1.0 field.
+ *
+ ******************************************************************************/
+
+static void acpi_tb_convert_fadt(void)
+{
+ u8 pm1_register_bit_width;
+ u8 pm1_register_byte_width;
+ struct acpi_generic_address *target64;
+ u32 i;
+
+ /* Update the local FADT table header length */
+
+ acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt);
+
+ /*
+ * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary.
+ * Later code will always use the X 64-bit field. Also, check for an
+ * address mismatch between the 32-bit and 64-bit address fields
+ * (FIRMWARE_CTRL/X_FIRMWARE_CTRL, DSDT/X_DSDT) which would indicate
+ * the presence of two FACS or two DSDT tables.
+ */
+ if (!acpi_gbl_FADT.Xfacs) {
+ acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
+ } else if (acpi_gbl_FADT.facs &&
+ (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
+ ACPI_WARNING((AE_INFO,
+ "32/64 FACS address mismatch in FADT - two FACS tables!"));
+ }
+
+ if (!acpi_gbl_FADT.Xdsdt) {
+ acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
+ } else if (acpi_gbl_FADT.dsdt &&
+ (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
+ ACPI_WARNING((AE_INFO,
+ "32/64 DSDT address mismatch in FADT - two DSDT tables!"));
+ }
+
+ /*
+ * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which
+ * should be zero are indeed zero. This will workaround BIOSs that
+ * inadvertently place values in these fields.
+ *
+ * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
+ * offset 45, 55, 95, and the word located at offset 109, 110.
+ */
+ if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) {
+ acpi_gbl_FADT.preferred_profile = 0;
+ acpi_gbl_FADT.pstate_control = 0;
+ acpi_gbl_FADT.cst_control = 0;
+ acpi_gbl_FADT.boot_flags = 0;
+ }
+
+ /*
+ * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X"
+ * generic address structures as necessary. Later code will always use
+ * the 64-bit address structures.
+ */
+ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+ target64 =
+ ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
+ fadt_info_table[i].address64);
+
+ /* Expand only if the 64-bit X target is null */
+
+ if (!target64->address) {
+
+ /* The space_id is always I/O for the 32-bit legacy address fields */
+
+ acpi_tb_init_generic_address(target64,
+ ACPI_ADR_SPACE_SYSTEM_IO,
+ *ACPI_ADD_PTR(u8,
+ &acpi_gbl_FADT,
+ fadt_info_table
+ [i].length),
+ (u64) * ACPI_ADD_PTR(u32,
+ &acpi_gbl_FADT,
+ fadt_info_table
+ [i].
+ address32));
+ }
+ }
+
+ /* Validate FADT values now, before we make any changes */
+
+ acpi_tb_validate_fadt();
+
+ /*
+ * Optionally check all register lengths against the default values and
+ * update them if they are incorrect.
+ */
+ if (acpi_gbl_use_default_register_widths) {
+ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+ target64 =
+ ACPI_ADD_PTR(struct acpi_generic_address,
+ &acpi_gbl_FADT,
+ fadt_info_table[i].address64);
+
+ /*
+ * If a valid register (Address != 0) and the (default_length > 0)
+ * (Not a GPE register), then check the width against the default.
+ */
+ if ((target64->address) &&
+ (fadt_info_table[i].default_length > 0) &&
+ (fadt_info_table[i].default_length !=
+ target64->bit_width)) {
+ ACPI_WARNING((AE_INFO,
+ "Invalid length for %s: %d, using default %d",
+ fadt_info_table[i].name,
+ target64->bit_width,
+ fadt_info_table[i].
+ default_length));
+
+ /* Incorrect size, set width to the default */
+
+ target64->bit_width =
+ fadt_info_table[i].default_length;
+ }
+ }
+ }
+
+ /*
+ * Get the length of the individual PM1 registers (enable and status).
+ * Each register is defined to be (event block length / 2).
+ */
+ pm1_register_bit_width =
+ (u8)ACPI_DIV_2(acpi_gbl_FADT.xpm1a_event_block.bit_width);
+ pm1_register_byte_width = (u8)ACPI_DIV_8(pm1_register_bit_width);
+
+ /*
+ * Adjust the lengths of the PM1 Event Blocks so that they can be used to
+ * access the PM1 status register(s). Use (width / 2)
+ */
+ acpi_gbl_FADT.xpm1a_event_block.bit_width = pm1_register_bit_width;
+ acpi_gbl_FADT.xpm1b_event_block.bit_width = pm1_register_bit_width;
+
+ /*
+ * Calculate separate GAS structs for the PM1 Enable registers.
+ * These addresses do not appear (directly) in the FADT, so it is
+ * useful to calculate them once, here.
+ *
+ * The PM event blocks are split into two register blocks, first is the
+ * PM Status Register block, followed immediately by the PM Enable
+ * Register block. Each is of length (xpm1x_event_block.bit_width/2).
+ *
+ * On various systems the v2 fields (and particularly the bit widths)
+ * cannot be relied upon, though. Hence resort to using the v1 length
+ * here (and warn about the inconsistency).
+ */
+ if (acpi_gbl_FADT.xpm1a_event_block.bit_width
+ != acpi_gbl_FADT.pm1_event_length * 8)
+ printk(KERN_WARNING "FADT: "
+ "X_PM1a_EVT_BLK.bit_width (%u) does not match"
+ " PM1_EVT_LEN (%u)\n",
+ acpi_gbl_FADT.xpm1a_event_block.bit_width,
+ acpi_gbl_FADT.pm1_event_length);
+
+ /* The PM1A register block is required */
+
+ acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
+ acpi_gbl_FADT.xpm1a_event_block.space_id,
+ pm1_register_byte_width,
+ (acpi_gbl_FADT.xpm1a_event_block.address +
+ pm1_register_byte_width));
+ /* Don't forget to copy space_id of the GAS */
+ acpi_gbl_xpm1a_enable.space_id =
+ acpi_gbl_FADT.xpm1a_event_block.space_id;
+
+ /* The PM1B register block is optional, ignore if not present */
+
+ if (acpi_gbl_FADT.xpm1b_event_block.address) {
+ if (acpi_gbl_FADT.xpm1b_event_block.bit_width
+ != acpi_gbl_FADT.pm1_event_length * 8)
+ printk(KERN_WARNING "FADT: "
+ "X_PM1b_EVT_BLK.bit_width (%u) does not match"
+ " PM1_EVT_LEN (%u)\n",
+ acpi_gbl_FADT.xpm1b_event_block.bit_width,
+ acpi_gbl_FADT.pm1_event_length);
+ acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
+ acpi_gbl_FADT.xpm1b_event_block.space_id,
+ pm1_register_byte_width,
+ (acpi_gbl_FADT.xpm1b_event_block.
+ address + pm1_register_byte_width));
+ /* Don't forget to copy space_id of the GAS */
+ acpi_gbl_xpm1b_enable.space_id =
+ acpi_gbl_FADT.xpm1b_event_block.space_id;
+
+ }
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_tb_validate_fadt
+ *
+ * PARAMETERS: Table - Pointer to the FADT to be validated
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Validate various important fields within the FADT. If a problem
+ * is found, issue a message, but no status is returned.
+ * Used by both the table manager and the disassembler.
+ *
+ * Possible additional checks:
+ * (acpi_gbl_FADT.pm1_event_length >= 4)
+ * (acpi_gbl_FADT.pm1_control_length >= 2)
+ * (acpi_gbl_FADT.pm_timer_length >= 4)
+ * Gpe block lengths must be multiple of 2
+ *
+ ******************************************************************************/
+
+static void acpi_tb_validate_fadt(void)
+{
+ char *name;
+ u32 *address32;
+ struct acpi_generic_address *address64;
+ u8 length;
+ u32 i;
+
+ /*
+ * Check for FACS and DSDT address mismatches. An address mismatch between
+ * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and
+ * DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
+ */
+ if (acpi_gbl_FADT.facs &&
+ (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
+ ACPI_WARNING((AE_INFO,
+ "32/64X FACS address mismatch in FADT - "
+ "two FACS tables! %8.8X/%8.8X%8.8X",
+ acpi_gbl_FADT.facs,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
+ }
+
+ if (acpi_gbl_FADT.dsdt &&
+ (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
+ ACPI_WARNING((AE_INFO,
+ "32/64X DSDT address mismatch in FADT - "
+ "two DSDT tables! %8.8X/%8.8X%8.8X",
+ acpi_gbl_FADT.dsdt,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
+ }
+
+ /* Examine all of the 64-bit extended address fields (X fields) */
+
+ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+ /*
+ * Generate pointers to the 32-bit and 64-bit addresses, get the
+ * register length (width), and the register name
+ */
+ address64 = ACPI_ADD_PTR(struct acpi_generic_address,
+ &acpi_gbl_FADT,
+ fadt_info_table[i].address64);
+ address32 =
+ ACPI_ADD_PTR(u32, &acpi_gbl_FADT,
+ fadt_info_table[i].address32);
+ length =
+ *ACPI_ADD_PTR(u8, &acpi_gbl_FADT,
+ fadt_info_table[i].length);
+ name = fadt_info_table[i].name;
+
+ /*
+ * For each extended field, check for length mismatch between the
+ * legacy length field and the corresponding 64-bit X length field.
+ */
+ if (address64 && (address64->bit_width != ACPI_MUL_8(length))) {
+ ACPI_WARNING((AE_INFO,
+ "32/64X length mismatch in %s: %d/%d",
+ name, ACPI_MUL_8(length),
+ address64->bit_width));
+ }
+
+ if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
+ /*
+ * Field is required (Pm1a_event, Pm1a_control, pm_timer).
+ * Both the address and length must be non-zero.
+ */
+ if (!address64->address || !length) {
+ ACPI_ERROR((AE_INFO,
+ "Required field %s has zero address and/or length: %8.8X%8.8X/%X",
+ name,
+ ACPI_FORMAT_UINT64(address64->
+ address),
+ length));
+ }
+ } else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
+ /*
+ * Field is optional (PM2Control, GPE0, GPE1) AND has its own
+ * length field. If present, both the address and length must be valid.
+ */
+ if ((address64->address && !length)
+ || (!address64->address && length)) {
+ ACPI_WARNING((AE_INFO,
+ "Optional field %s has zero address or length: %8.8X%8.8X/%X",
+ name,
+ ACPI_FORMAT_UINT64(address64->
+ address),
+ length));
+ }
+ }
+
+ /* If both 32- and 64-bit addresses are valid (non-zero), they must match */
+
+ if (address64->address && *address32 &&
+ (address64->address != (u64) * address32)) {
+ ACPI_ERROR((AE_INFO,
+ "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 64X",
+ name, *address32,
+ ACPI_FORMAT_UINT64(address64->address)));
+ }
+ }
+}