summaryrefslogtreecommitdiff
path: root/drivers/ata/ahci_imx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/ahci_imx.c')
-rw-r--r--drivers/ata/ahci_imx.c182
1 files changed, 174 insertions, 8 deletions
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 497c7abe1c7d..3a901520c62b 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -29,9 +29,25 @@
#include "ahci.h"
enum {
- PORT_PHY_CTL = 0x178, /* Port0 PHY Control */
- PORT_PHY_CTL_PDDQ_LOC = 0x100000, /* PORT_PHY_CTL bits */
- HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+ /* Timer 1-ms Register */
+ IMX_TIMER1MS = 0x00e0,
+ /* Port0 PHY Control Register */
+ IMX_P0PHYCR = 0x0178,
+ IMX_P0PHYCR_TEST_PDDQ = 1 << 20,
+ IMX_P0PHYCR_CR_READ = 1 << 19,
+ IMX_P0PHYCR_CR_WRITE = 1 << 18,
+ IMX_P0PHYCR_CR_CAP_DATA = 1 << 17,
+ IMX_P0PHYCR_CR_CAP_ADDR = 1 << 16,
+ /* Port0 PHY Status Register */
+ IMX_P0PHYSR = 0x017c,
+ IMX_P0PHYSR_CR_ACK = 1 << 18,
+ IMX_P0PHYSR_CR_DATA_OUT = 0xffff << 0,
+ /* Lane0 Output Status Register */
+ IMX_LANE0_OUT_STAT = 0x2003,
+ IMX_LANE0_OUT_STAT_RX_PLL_STATE = 1 << 1,
+ /* Clock Reset Register */
+ IMX_CLOCK_RESET = 0x7f3f,
+ IMX_CLOCK_RESET_RESET = 1 << 0,
};
enum ahci_imx_type {
@@ -54,9 +70,149 @@ MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support
static void ahci_imx_host_stop(struct ata_host *host);
+static int imx_phy_crbit_assert(void __iomem *mmio, u32 bit, bool assert)
+{
+ int timeout = 10;
+ u32 crval;
+ u32 srval;
+
+ /* Assert or deassert the bit */
+ crval = readl(mmio + IMX_P0PHYCR);
+ if (assert)
+ crval |= bit;
+ else
+ crval &= ~bit;
+ writel(crval, mmio + IMX_P0PHYCR);
+
+ /* Wait for the cr_ack signal */
+ do {
+ srval = readl(mmio + IMX_P0PHYSR);
+ if ((assert ? srval : ~srval) & IMX_P0PHYSR_CR_ACK)
+ break;
+ usleep_range(100, 200);
+ } while (--timeout);
+
+ return timeout ? 0 : -ETIMEDOUT;
+}
+
+static int imx_phy_reg_addressing(u16 addr, void __iomem *mmio)
+{
+ u32 crval = addr;
+ int ret;
+
+ /* Supply the address on cr_data_in */
+ writel(crval, mmio + IMX_P0PHYCR);
+
+ /* Assert the cr_cap_addr signal */
+ ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, true);
+ if (ret)
+ return ret;
+
+ /* Deassert cr_cap_addr */
+ ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, false);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int imx_phy_reg_write(u16 val, void __iomem *mmio)
+{
+ u32 crval = val;
+ int ret;
+
+ /* Supply the data on cr_data_in */
+ writel(crval, mmio + IMX_P0PHYCR);
+
+ /* Assert the cr_cap_data signal */
+ ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, true);
+ if (ret)
+ return ret;
+
+ /* Deassert cr_cap_data */
+ ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, false);
+ if (ret)
+ return ret;
+
+ if (val & IMX_CLOCK_RESET_RESET) {
+ /*
+ * In case we're resetting the phy, it's unable to acknowledge,
+ * so we return immediately here.
+ */
+ crval |= IMX_P0PHYCR_CR_WRITE;
+ writel(crval, mmio + IMX_P0PHYCR);
+ goto out;
+ }
+
+ /* Assert the cr_write signal */
+ ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, true);
+ if (ret)
+ return ret;
+
+ /* Deassert cr_write */
+ ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, false);
+ if (ret)
+ return ret;
+
+out:
+ return 0;
+}
+
+static int imx_phy_reg_read(u16 *val, void __iomem *mmio)
+{
+ int ret;
+
+ /* Assert the cr_read signal */
+ ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, true);
+ if (ret)
+ return ret;
+
+ /* Capture the data from cr_data_out[] */
+ *val = readl(mmio + IMX_P0PHYSR) & IMX_P0PHYSR_CR_DATA_OUT;
+
+ /* Deassert cr_read */
+ ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, false);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int imx_sata_phy_reset(struct ahci_host_priv *hpriv)
+{
+ void __iomem *mmio = hpriv->mmio;
+ int timeout = 10;
+ u16 val;
+ int ret;
+
+ /* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */
+ ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio);
+ if (ret)
+ return ret;
+ ret = imx_phy_reg_write(IMX_CLOCK_RESET_RESET, mmio);
+ if (ret)
+ return ret;
+
+ /* Wait for PHY RX_PLL to be stable */
+ do {
+ usleep_range(100, 200);
+ ret = imx_phy_reg_addressing(IMX_LANE0_OUT_STAT, mmio);
+ if (ret)
+ return ret;
+ ret = imx_phy_reg_read(&val, mmio);
+ if (ret)
+ return ret;
+ if (val & IMX_LANE0_OUT_STAT_RX_PLL_STATE)
+ break;
+ } while (--timeout);
+
+ return timeout ? 0 : -ETIMEDOUT;
+}
+
static int imx_sata_enable(struct ahci_host_priv *hpriv)
{
struct imx_ahci_priv *imxpriv = hpriv->plat_data;
+ struct device *dev = &imxpriv->ahci_pdev->dev;
int ret;
if (imxpriv->no_device)
@@ -101,6 +257,14 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+
+ usleep_range(100, 200);
+
+ ret = imx_sata_phy_reset(hpriv);
+ if (ret) {
+ dev_err(dev, "failed to reset phy: %d\n", ret);
+ goto disable_regulator;
+ }
}
usleep_range(1000, 2000);
@@ -156,8 +320,8 @@ static void ahci_imx_error_handler(struct ata_port *ap)
* without full reset once the pddq mode is enabled making it
* impossible to use as part of libata LPM.
*/
- reg_val = readl(mmio + PORT_PHY_CTL);
- writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL);
+ reg_val = readl(mmio + IMX_P0PHYCR);
+ writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR);
imx_sata_disable(hpriv);
imxpriv->no_device = true;
}
@@ -217,6 +381,7 @@ static int imx_ahci_probe(struct platform_device *pdev)
if (!imxpriv)
return -ENOMEM;
+ imxpriv->ahci_pdev = pdev;
imxpriv->no_device = false;
imxpriv->first_time = true;
imxpriv->type = (enum ahci_imx_type)of_id->data;
@@ -248,7 +413,7 @@ static int imx_ahci_probe(struct platform_device *pdev)
/*
* Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
- * and IP vendor specific register HOST_TIMER1MS.
+ * and IP vendor specific register IMX_TIMER1MS.
* Configure CAP_SSS (support stagered spin up).
* Implement the port0.
* Get the ahb clock rate, and configure the TIMER1MS register.
@@ -265,9 +430,10 @@ static int imx_ahci_probe(struct platform_device *pdev)
}
reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
- writel(reg_val, hpriv->mmio + HOST_TIMER1MS);
+ writel(reg_val, hpriv->mmio + IMX_TIMER1MS);
- ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0);
+ ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info,
+ 0, 0, 0);
if (ret)
imx_sata_disable(hpriv);