summaryrefslogtreecommitdiff
path: root/drivers/ata/libata-scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libata-scsi.c')
-rw-r--r--drivers/ata/libata-scsi.c159
1 files changed, 51 insertions, 108 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d0dfeef55db5..b4ee28dec521 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1119,10 +1119,6 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
} else {
- if (ata_id_is_ssd(dev->id))
- queue_flag_set_unlocked(QUEUE_FLAG_NONROT,
- sdev->request_queue);
-
/* ATA devices must be sector aligned */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_SECT_SIZE - 1);
@@ -1257,23 +1253,6 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
return queue_depth;
}
-/* XXX: for spindown warning */
-static void ata_delayed_done_timerfn(unsigned long arg)
-{
- struct scsi_cmnd *scmd = (void *)arg;
-
- scmd->scsi_done(scmd);
-}
-
-/* XXX: for spindown warning */
-static void ata_delayed_done(struct scsi_cmnd *scmd)
-{
- static struct timer_list timer;
-
- setup_timer(&timer, ata_delayed_done_timerfn, (unsigned long)scmd);
- mod_timer(&timer, jiffies + 5 * HZ);
-}
-
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
@@ -1338,32 +1317,6 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
system_entering_hibernation())
goto skip;
- /* XXX: This is for backward compatibility, will be
- * removed. Read Documentation/feature-removal-schedule.txt
- * for more info.
- */
- if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) &&
- (system_state == SYSTEM_HALT ||
- system_state == SYSTEM_POWER_OFF)) {
- static unsigned long warned;
-
- if (!test_and_set_bit(0, &warned)) {
- ata_dev_printk(qc->dev, KERN_WARNING,
- "DISK MIGHT NOT BE SPUN DOWN PROPERLY. "
- "UPDATE SHUTDOWN UTILITY\n");
- ata_dev_printk(qc->dev, KERN_WARNING,
- "For more info, visit "
- "http://linux-ata.org/shutdown.html\n");
-
- /* ->scsi_done is not used, use it for
- * delayed completion.
- */
- scmd->scsi_done = qc->scsidone;
- qc->scsidone = ata_delayed_done;
- }
- goto skip;
- }
-
/* Issue ATA STANDBY IMMEDIATE command */
tf->command = ATA_CMD_STANDBYNOW1;
}
@@ -1764,14 +1717,6 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
}
}
- /* XXX: track spindown state for spindown skipping and warning */
- if (unlikely(qc->tf.command == ATA_CMD_STANDBY ||
- qc->tf.command == ATA_CMD_STANDBYNOW1))
- qc->dev->flags |= ATA_DFLAG_SPUNDOWN;
- else if (likely(system_state != SYSTEM_HALT &&
- system_state != SYSTEM_POWER_OFF))
- qc->dev->flags &= ~ATA_DFLAG_SPUNDOWN;
-
if (need_sense && !ap->ops->error_handler)
ata_dump_status(ap->print_id, &qc->result_tf);
@@ -2815,28 +2760,6 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
goto invalid_fld;
/*
- * Filter TPM commands by default. These provide an
- * essentially uncontrolled encrypted "back door" between
- * applications and the disk. Set libata.allow_tpm=1 if you
- * have a real reason for wanting to use them. This ensures
- * that installed software cannot easily mess stuff up without
- * user intent. DVR type users will probably ship with this enabled
- * for movie content management.
- *
- * Note that for ATA8 we can issue a DCS change and DCS freeze lock
- * for this and should do in future but that it is not sufficient as
- * DCS is an optional feature set. Thus we also do the software filter
- * so that we comply with the TC consortium stated goal that the user
- * can turn off TC features of their system.
- */
- if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm)
- goto invalid_fld;
-
- /* We may not issue DMA commands if no DMA mode is set */
- if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
- goto invalid_fld;
-
- /*
* 12 and 16 byte CDBs use different offsets to
* provide the various register values.
*/
@@ -2885,6 +2808,41 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
tf->device = dev->devno ?
tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+ /* READ/WRITE LONG use a non-standard sect_size */
+ qc->sect_size = ATA_SECT_SIZE;
+ switch (tf->command) {
+ case ATA_CMD_READ_LONG:
+ case ATA_CMD_READ_LONG_ONCE:
+ case ATA_CMD_WRITE_LONG:
+ case ATA_CMD_WRITE_LONG_ONCE:
+ if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
+ goto invalid_fld;
+ qc->sect_size = scsi_bufflen(scmd);
+ }
+
+ /*
+ * Set flags so that all registers will be written, pass on
+ * write indication (used for PIO/DMA setup), result TF is
+ * copied back and we don't whine too much about its failure.
+ */
+ tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ ata_qc_set_pc_nbytes(qc);
+
+ /* We may not issue DMA commands if no DMA mode is set */
+ if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
+ goto invalid_fld;
+
/* sanity check for pio multi commands */
if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf))
goto invalid_fld;
@@ -2901,18 +2859,6 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
multi_count);
}
- /* READ/WRITE LONG use a non-standard sect_size */
- qc->sect_size = ATA_SECT_SIZE;
- switch (tf->command) {
- case ATA_CMD_READ_LONG:
- case ATA_CMD_READ_LONG_ONCE:
- case ATA_CMD_WRITE_LONG:
- case ATA_CMD_WRITE_LONG_ONCE:
- if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
- goto invalid_fld;
- qc->sect_size = scsi_bufflen(scmd);
- }
-
/*
* Filter SET_FEATURES - XFER MODE command -- otherwise,
* SET_FEATURES - XFER MODE must be preceded/succeeded
@@ -2920,30 +2866,27 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
* controller (i.e. the reason for ->set_piomode(),
* ->set_dmamode(), and ->post_set_mode() hooks).
*/
- if ((tf->command == ATA_CMD_SET_FEATURES)
- && (tf->feature == SETFEATURES_XFER))
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_XFER)
goto invalid_fld;
/*
- * Set flags so that all registers will be written,
- * and pass on write indication (used for PIO/DMA
- * setup.)
- */
- tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
-
- if (scmd->sc_data_direction == DMA_TO_DEVICE)
- tf->flags |= ATA_TFLAG_WRITE;
-
- /*
- * Set transfer length.
+ * Filter TPM commands by default. These provide an
+ * essentially uncontrolled encrypted "back door" between
+ * applications and the disk. Set libata.allow_tpm=1 if you
+ * have a real reason for wanting to use them. This ensures
+ * that installed software cannot easily mess stuff up without
+ * user intent. DVR type users will probably ship with this enabled
+ * for movie content management.
*
- * TODO: find out if we need to do more here to
- * cover scatter/gather case.
+ * Note that for ATA8 we can issue a DCS change and DCS freeze lock
+ * for this and should do in future but that it is not sufficient as
+ * DCS is an optional feature set. Thus we also do the software filter
+ * so that we comply with the TC consortium stated goal that the user
+ * can turn off TC features of their system.
*/
- ata_qc_set_pc_nbytes(qc);
-
- /* request result TF and be quiet about device error */
- qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
+ if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm)
+ goto invalid_fld;
return 0;
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-26 10:57:46 +0000