summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_hpt37x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
-rw-r--r--drivers/ata/pata_hpt37x.c54
1 files changed, 44 insertions, 10 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 9ae4c0830577..9c62951c3e26 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -8,7 +8,7 @@
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2010 MontaVista Software, Inc.
*
* TODO
* Look into engine reset on timeout errors. Should not be required.
@@ -24,7 +24,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.15"
+#define DRV_VERSION "0.6.16"
struct hpt_clock {
u8 xfer_speed;
@@ -302,6 +302,22 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
}
/**
+ * hpt372_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: mode mask
+ *
+ * The Marvell bridge chips used on the HighPoint SATA cards do not seem
+ * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
+ */
+static unsigned long hpt372_filter(struct ata_device *adev, unsigned long mask)
+{
+ if (ata_id_is_sata(adev->id))
+ mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA);
+
+ return mask;
+}
+
+/**
* hpt37x_cable_detect - Detect the cable type
* @ap: ATA port to detect on
*
@@ -586,11 +602,11 @@ static struct ata_port_operations hpt370a_port_ops = {
};
/*
- * Configuration for HPT372, HPT371, HPT302. Slightly different PIO
- * and DMA mode setting functionality.
+ * Configuration for HPT371 and HPT302. Slightly different PIO and DMA
+ * mode setting functionality.
*/
-static struct ata_port_operations hpt372_port_ops = {
+static struct ata_port_operations hpt302_port_ops = {
.inherits = &ata_bmdma_port_ops,
.bmdma_stop = hpt37x_bmdma_stop,
@@ -602,7 +618,17 @@ static struct ata_port_operations hpt372_port_ops = {
};
/*
- * Configuration for HPT374. Mode setting works like 372 and friends
+ * Configuration for HPT372. Mode setting works like 371 and 302
+ * but we have a mode filter.
+ */
+
+static struct ata_port_operations hpt372_port_ops = {
+ .inherits = &hpt302_port_ops,
+ .mode_filter = hpt372_filter,
+};
+
+/*
+ * Configuration for HPT374. Mode setting and filtering works like 372
* but we have a different cable detection procedure for function 1.
*/
@@ -753,7 +779,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA5,
.port_ops = &hpt370a_port_ops
};
- /* HPT371, 372 and friends - UDMA133 */
+ /* HPT372 - UDMA133 */
static const struct ata_port_info info_hpt372 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
@@ -761,6 +787,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA6,
.port_ops = &hpt372_port_ops
};
+ /* HPT371, 302 - UDMA133 */
+ static const struct ata_port_info info_hpt302 = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &hpt302_port_ops
+ };
/* HPT374 - UDMA100, function 1 uses different prereset method */
static const struct ata_port_info info_hpt374_fn0 = {
.flags = ATA_FLAG_SLAVE_POSS,
@@ -828,7 +862,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
} else {
switch(dev->device) {
case PCI_DEVICE_ID_TTI_HPT372:
- /* 372N if rev >= 2*/
+ /* 372N if rev >= 2 */
if (rev >= 2)
return -ENODEV;
ppi[0] = &info_hpt372;
@@ -838,14 +872,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* 302N if rev > 1 */
if (rev > 1)
return -ENODEV;
- ppi[0] = &info_hpt372;
+ ppi[0] = &info_hpt302;
/* Check this */
chip_table = &hpt302;
break;
case PCI_DEVICE_ID_TTI_HPT371:
if (rev > 1)
return -ENODEV;
- ppi[0] = &info_hpt372;
+ ppi[0] = &info_hpt302;
chip_table = &hpt371;
/* Single channel device, master is not present
but the BIOS (or us for non x86) must mark it