diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/Kconfig | 3 | ||||
-rw-r--r-- | drivers/ata/ahci.c | 7 | ||||
-rw-r--r-- | drivers/ata/ahci_brcm.c | 112 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 1 | ||||
-rw-r--r-- | drivers/ata/libahci_platform.c | 9 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 33 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 8 | ||||
-rw-r--r-- | drivers/ata/libata-pmp.c | 1 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 30 | ||||
-rw-r--r-- | drivers/ata/libata-sff.c | 6 | ||||
-rw-r--r-- | drivers/ata/libata-zpodd.c | 36 | ||||
-rw-r--r-- | drivers/ata/pata_ep93xx.c | 8 |
12 files changed, 194 insertions, 60 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index cbdf105dfe88..ca84e84bc369 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -100,7 +100,8 @@ config SATA_AHCI_PLATFORM config AHCI_BRCM tristate "Broadcom AHCI SATA support" - depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP + depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \ + ARCH_BCM_63XX help This option enables support for the AHCI SATA3 controller found on Broadcom SoC's. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 5408a292078b..89e62043d02e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -86,6 +86,7 @@ enum board_ids { static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static void ahci_remove_one(struct pci_dev *dev); +static void ahci_shutdown_one(struct pci_dev *dev); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, @@ -582,6 +583,7 @@ static struct pci_driver ahci_pci_driver = { .id_table = ahci_pci_tbl, .probe = ahci_init_one, .remove = ahci_remove_one, + .shutdown = ahci_shutdown_one, .driver = { .pm = &ahci_pci_pm_ops, }, @@ -1775,6 +1777,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; } +static void ahci_shutdown_one(struct pci_dev *pdev) +{ + ata_pci_shutdown_one(pdev); +} + static void ahci_remove_one(struct pci_dev *pdev) { pm_runtime_get_noresume(&pdev->dev); diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c index 6f8a7341fa08..f50a76ad63e4 100644 --- a/drivers/ata/ahci_brcm.c +++ b/drivers/ata/ahci_brcm.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/reset.h> #include <linux/string.h> #include "ahci.h" @@ -88,6 +89,7 @@ struct brcm_ahci_priv { u32 port_mask; u32 quirks; enum brcm_ahci_version version; + struct reset_control *rcdev; }; static const struct ata_port_info ahci_brcm_port_info = { @@ -226,19 +228,12 @@ static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv) brcm_sata_phy_disable(priv, i); } -static u32 brcm_ahci_get_portmask(struct platform_device *pdev, +static u32 brcm_ahci_get_portmask(struct ahci_host_priv *hpriv, struct brcm_ahci_priv *priv) { - void __iomem *ahci; - struct resource *res; u32 impl; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci"); - ahci = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(ahci)) - return 0; - - impl = readl(ahci + HOST_PORTS_IMPL); + impl = readl(hpriv->mmio + HOST_PORTS_IMPL); if (fls(impl) > SATA_TOP_MAX_PHYS) dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n", @@ -246,9 +241,6 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev, else if (!impl) dev_info(priv->dev, "no ports found\n"); - devm_iounmap(&pdev->dev, ahci); - devm_release_mem_region(&pdev->dev, res->start, resource_size(res)); - return impl; } @@ -275,11 +267,10 @@ static int brcm_ahci_suspend(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; struct brcm_ahci_priv *priv = hpriv->plat_data; - int ret; - ret = ahci_platform_suspend(dev); brcm_sata_phys_disable(priv); - return ret; + + return ahci_platform_suspend(dev); } static int brcm_ahci_resume(struct device *dev) @@ -287,11 +278,44 @@ static int brcm_ahci_resume(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; struct brcm_ahci_priv *priv = hpriv->plat_data; + int ret; + + /* Make sure clocks are turned on before re-configuration */ + ret = ahci_platform_enable_clks(hpriv); + if (ret) + return ret; brcm_sata_init(priv); brcm_sata_phys_enable(priv); brcm_sata_alpm_init(hpriv); - return ahci_platform_resume(dev); + + /* Since we had to enable clocks earlier on, we cannot use + * ahci_platform_resume() as-is since a second call to + * ahci_platform_enable_resources() would bump up the resources + * (regulators, clocks, PHYs) count artificially so we copy the part + * after ahci_platform_enable_resources(). + */ + ret = ahci_platform_enable_phys(hpriv); + if (ret) + goto out_disable_phys; + + ret = ahci_platform_resume_host(dev); + if (ret) + goto out_disable_platform_phys; + + /* We resumed so update PM runtime state */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; + +out_disable_platform_phys: + ahci_platform_disable_phys(hpriv); +out_disable_phys: + brcm_sata_phys_disable(priv); + ahci_platform_disable_clks(hpriv); + return ret; } #endif @@ -332,43 +356,73 @@ static int brcm_ahci_probe(struct platform_device *pdev) if (IS_ERR(priv->top_ctrl)) return PTR_ERR(priv->top_ctrl); + /* Reset is optional depending on platform */ + priv->rcdev = devm_reset_control_get(&pdev->dev, "ahci"); + if (!IS_ERR_OR_NULL(priv->rcdev)) + reset_control_deassert(priv->rcdev); + if ((priv->version == BRCM_SATA_BCM7425) || (priv->version == BRCM_SATA_NSP)) { priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ; priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE; } + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) { + ret = PTR_ERR(hpriv); + goto out_reset; + } + + ret = ahci_platform_enable_clks(hpriv); + if (ret) + goto out_reset; + + /* Must be first so as to configure endianness including that + * of the standard AHCI register space. + */ brcm_sata_init(priv); - priv->port_mask = brcm_ahci_get_portmask(pdev, priv); - if (!priv->port_mask) - return -ENODEV; + /* Initializes priv->port_mask which is used below */ + priv->port_mask = brcm_ahci_get_portmask(hpriv, priv); + if (!priv->port_mask) { + ret = -ENODEV; + goto out_disable_clks; + } + /* Must be done before ahci_platform_enable_phys() */ brcm_sata_phys_enable(priv); - hpriv = ahci_platform_get_resources(pdev); - if (IS_ERR(hpriv)) - return PTR_ERR(hpriv); hpriv->plat_data = priv; hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP; brcm_sata_alpm_init(hpriv); - ret = ahci_platform_enable_resources(hpriv); - if (ret) - return ret; - if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ) hpriv->flags |= AHCI_HFLAG_NO_NCQ; + ret = ahci_platform_enable_phys(hpriv); + if (ret) + goto out_disable_phys; + ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info, &ahci_platform_sht); if (ret) - return ret; + goto out_disable_platform_phys; dev_info(dev, "Broadcom AHCI SATA3 registered\n"); return 0; + +out_disable_platform_phys: + ahci_platform_disable_phys(hpriv); +out_disable_phys: + brcm_sata_phys_disable(priv); +out_disable_clks: + ahci_platform_disable_clks(hpriv); +out_reset: + if (!IS_ERR_OR_NULL(priv->rcdev)) + reset_control_assert(priv->rcdev); + return ret; } static int brcm_ahci_remove(struct platform_device *pdev) @@ -378,12 +432,12 @@ static int brcm_ahci_remove(struct platform_device *pdev) struct brcm_ahci_priv *priv = hpriv->plat_data; int ret; + brcm_sata_phys_disable(priv); + ret = ata_platform_remove_one(pdev); if (ret) return ret; - brcm_sata_phys_disable(priv); - return 0; } diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index f233ce60a678..1610fff19bb3 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -190,7 +190,6 @@ struct ata_port_operations ahci_pmp_retry_srst_ops = { EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops); static bool ahci_em_messages __read_mostly = true; -EXPORT_SYMBOL_GPL(ahci_em_messages); module_param(ahci_em_messages, bool, 0444); /* add other LED protocol types when they become supported */ MODULE_PARM_DESC(ahci_em_messages, diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index cd2eab6aa92e..0b80502bc1c5 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -46,7 +46,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_ops); * RETURNS: * 0 on success otherwise a negative error code */ -static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv) +int ahci_platform_enable_phys(struct ahci_host_priv *hpriv) { int rc, i; @@ -71,6 +71,7 @@ disable_phys: } return rc; } +EXPORT_SYMBOL_GPL(ahci_platform_enable_phys); /** * ahci_platform_disable_phys - Disable PHYs @@ -78,7 +79,7 @@ disable_phys: * * This function disables all PHYs found in hpriv->phys. */ -static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) +void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) { int i; @@ -87,6 +88,7 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) phy_exit(hpriv->phys[i]); } } +EXPORT_SYMBOL_GPL(ahci_platform_disable_phys); /** * ahci_platform_enable_clks - Enable platform clocks @@ -300,6 +302,9 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port, hpriv->phys[port] = NULL; rc = 0; break; + case -EPROBE_DEFER: + /* Do not complain yet */ + break; default: dev_err(dev, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 35be49f5791d..ba0cffbd0bb6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4355,9 +4355,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - /* drives which fail FPDMA_AA activation (some may freeze afterwards) */ - { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, - { "ST1000LM024 HN-M101MBB", "2BA30001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + /* drives which fail FPDMA_AA activation (some may freeze afterwards) + the ST disks also have LPM issues */ + { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA | + ATA_HORKAGE_NOLPM, }, + { "ST1000LM024 HN-M101MBB", "2BA30001", ATA_HORKAGE_BROKEN_FPDMA_AA | + ATA_HORKAGE_NOLPM, }, { "VB0250EAVER", "HPG7", ATA_HORKAGE_BROKEN_FPDMA_AA }, /* Blacklist entries taken from Silicon Image 3124/3132 @@ -6547,6 +6550,9 @@ void ata_host_detach(struct ata_host *host) { int i; + /* Ensure ata_port probe has completed */ + async_synchronize_full(); + for (i = 0; i < host->n_ports; i++) ata_port_detach(host->ports[i]); @@ -6574,6 +6580,26 @@ void ata_pci_remove_one(struct pci_dev *pdev) ata_host_detach(host); } +void ata_pci_shutdown_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int i; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ap->pflags |= ATA_PFLAG_FROZEN; + + /* Disable port interrupts */ + if (ap->ops->freeze) + ap->ops->freeze(ap); + + /* Stop the port DMA engines */ + if (ap->ops->port_stop) + ap->ops->port_stop(ap); + } +} + /* move to PCI subsystem */ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) { @@ -7194,6 +7220,7 @@ EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); +EXPORT_SYMBOL_GPL(ata_pci_shutdown_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 90c38778bc1f..16f8fda89981 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1600,7 +1600,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev, tf->hob_lbah = buf[10]; tf->nsect = buf[12]; tf->hob_nsect = buf[13]; - if (ata_id_has_ncq_autosense(dev->id)) + if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id)) tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16]; return 0; @@ -1849,7 +1849,8 @@ void ata_eh_analyze_ncq_error(struct ata_link *link) memcpy(&qc->result_tf, &tf, sizeof(tf)); qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48; qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ; - if ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary) { + if (dev->class == ATA_DEV_ZAC && + ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) { char sense_key, asc, ascq; sense_key = (qc->result_tf.auxiliary >> 16) & 0xff; @@ -1903,10 +1904,11 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, } switch (qc->dev->class) { - case ATA_DEV_ATA: case ATA_DEV_ZAC: if (stat & ATA_SENSE) ata_eh_request_sense(qc, qc->scsicmd); + /* fall through */ + case ATA_DEV_ATA: if (err & ATA_ICRC) qc->err_mask |= AC_ERR_ATA_BUS; if (err & (ATA_UNC | ATA_AMNF)) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 85aa76116a30..7924d0635718 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -764,6 +764,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap, if (dev->flags & ATA_DFLAG_DETACH) { detach = 1; + rc = -ENODEV; goto fail; } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a3d60ccafd9a..c4f2b563c9f0 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1734,6 +1734,21 @@ nothing_to_do: return 1; } +static bool ata_check_nblocks(struct scsi_cmnd *scmd, u32 n_blocks) +{ + struct request *rq = scmd->request; + u32 req_blocks; + + if (!blk_rq_is_passthrough(rq)) + return true; + + req_blocks = blk_rq_bytes(rq) / scmd->device->sector_size; + if (n_blocks > req_blocks) + return false; + + return true; +} + /** * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one * @qc: Storage for translated ATA taskfile @@ -1776,6 +1791,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) scsi_10_lba_len(cdb, &block, &n_block); if (cdb[1] & (1 << 3)) tf_flags |= ATA_TFLAG_FUA; + if (!ata_check_nblocks(scmd, n_block)) + goto invalid_fld; break; case READ_6: case WRITE_6: @@ -1790,6 +1807,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) */ if (!n_block) n_block = 256; + if (!ata_check_nblocks(scmd, n_block)) + goto invalid_fld; break; case READ_16: case WRITE_16: @@ -1800,6 +1819,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) scsi_16_lba_len(cdb, &block, &n_block); if (cdb[1] & (1 << 3)) tf_flags |= ATA_TFLAG_FUA; + if (!ata_check_nblocks(scmd, n_block)) + goto invalid_fld; break; default: DPRINTK("no-byte command\n"); @@ -4423,22 +4444,19 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) */ shost->max_host_blocked = 1; - rc = scsi_add_host_with_dma(ap->scsi_host, - &ap->tdev, ap->host->dev); + rc = scsi_add_host_with_dma(shost, &ap->tdev, ap->host->dev); if (rc) - goto err_add; + goto err_alloc; } return 0; - err_add: - scsi_host_put(host->ports[i]->scsi_host); err_alloc: while (--i >= 0) { struct Scsi_Host *shost = host->ports[i]->scsi_host; + /* scsi_host_put() is in ata_devres_release() */ scsi_remove_host(shost); - scsi_host_put(shost); } return rc; } diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 8d22acdf90f0..0e2bc5b9a78c 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -703,6 +703,10 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) unsigned int offset; unsigned char *buf; + if (!qc->cursg) { + qc->curbytes = qc->nbytes; + return; + } if (qc->curbytes == qc->nbytes - qc->sect_size) ap->hsm_task_state = HSM_ST_LAST; @@ -742,6 +746,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) if (qc->cursg_ofs == qc->cursg->length) { qc->cursg = sg_next(qc->cursg); + if (!qc->cursg) + ap->hsm_task_state = HSM_ST_LAST; qc->cursg_ofs = 0; } } diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c index 0ad96c647541..083856272e92 100644 --- a/drivers/ata/libata-zpodd.c +++ b/drivers/ata/libata-zpodd.c @@ -51,38 +51,52 @@ static int eject_tray(struct ata_device *dev) /* Per the spec, only slot type and drawer type ODD can be supported */ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev) { - char buf[16]; + char *buf; unsigned int ret; - struct rm_feature_desc *desc = (void *)(buf + 8); + struct rm_feature_desc *desc; struct ata_taskfile tf; - static const char cdb[] = { GPCMD_GET_CONFIGURATION, + static const char cdb[ATAPI_CDB_LEN] = { GPCMD_GET_CONFIGURATION, 2, /* only 1 feature descriptor requested */ 0, 3, /* 3, removable medium feature */ 0, 0, 0,/* reserved */ - 0, sizeof(buf), + 0, 16, 0, 0, 0, }; + buf = kzalloc(16, GFP_KERNEL); + if (!buf) + return ODD_MECH_TYPE_UNSUPPORTED; + desc = (void *)(buf + 8); + ata_tf_init(dev, &tf); tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.command = ATA_CMD_PACKET; tf.protocol = ATAPI_PROT_PIO; - tf.lbam = sizeof(buf); + tf.lbam = 16; ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, - buf, sizeof(buf), 0); - if (ret) + buf, 16, 0); + if (ret) { + kfree(buf); return ODD_MECH_TYPE_UNSUPPORTED; + } - if (be16_to_cpu(desc->feature_code) != 3) + if (be16_to_cpu(desc->feature_code) != 3) { + kfree(buf); return ODD_MECH_TYPE_UNSUPPORTED; + } - if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1) + if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1) { + kfree(buf); return ODD_MECH_TYPE_SLOT; - else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1) + } else if (desc->mech_type == 1 && desc->load == 0 && + desc->eject == 1) { + kfree(buf); return ODD_MECH_TYPE_DRAWER; - else + } else { + kfree(buf); return ODD_MECH_TYPE_UNSUPPORTED; + } } /* Test if ODD is zero power ready by sense code */ diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c index bd6b089c67a3..634c814cbeda 100644 --- a/drivers/ata/pata_ep93xx.c +++ b/drivers/ata/pata_ep93xx.c @@ -659,7 +659,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data) * start of new transfer. */ drv_data->dma_rx_data.port = EP93XX_DMA_IDE; - drv_data->dma_rx_data.direction = DMA_FROM_DEVICE; + drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM; drv_data->dma_rx_data.name = "ep93xx-pata-rx"; drv_data->dma_rx_channel = dma_request_channel(mask, ep93xx_pata_dma_filter, &drv_data->dma_rx_data); @@ -667,7 +667,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data) return; drv_data->dma_tx_data.port = EP93XX_DMA_IDE; - drv_data->dma_tx_data.direction = DMA_TO_DEVICE; + drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV; drv_data->dma_tx_data.name = "ep93xx-pata-tx"; drv_data->dma_tx_channel = dma_request_channel(mask, ep93xx_pata_dma_filter, &drv_data->dma_tx_data); @@ -678,7 +678,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data) /* Configure receive channel direction and source address */ memset(&conf, 0, sizeof(conf)); - conf.direction = DMA_FROM_DEVICE; + conf.direction = DMA_DEV_TO_MEM; conf.src_addr = drv_data->udma_in_phys; conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) { @@ -689,7 +689,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data) /* Configure transmit channel direction and destination address */ memset(&conf, 0, sizeof(conf)); - conf.direction = DMA_TO_DEVICE; + conf.direction = DMA_MEM_TO_DEV; conf.dst_addr = drv_data->udma_out_phys; conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) { |