summaryrefslogtreecommitdiff
path: root/drivers/block/cciss_scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/cciss_scsi.c')
-rw-r--r--drivers/block/cciss_scsi.c195
1 files changed, 154 insertions, 41 deletions
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e4bf9a11ca0d..e1233aabda77 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -358,23 +358,68 @@ find_bus_target_lun(int ctlr, int *bus, int *target, int *lun)
}
return (!found);
}
+struct scsi2map {
+ char scsi3addr[8];
+ int bus, target, lun;
+};
static int
cciss_scsi_add_entry(int ctlr, int hostno,
- unsigned char *scsi3addr, int devtype)
+ unsigned char *scsi3addr, int devtype,
+ struct scsi2map *added, int *nadded)
{
/* assumes hba[ctlr]->scsi_ctlr->lock is held */
int n = ccissscsi[ctlr].ndevices;
struct cciss_scsi_dev_t *sd;
+ int i, bus, target, lun;
+ unsigned char addr1[8], addr2[8];
if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
printk("cciss%d: Too many devices, "
"some will be inaccessible.\n", ctlr);
return -1;
}
+
+ bus = target = -1;
+ lun = 0;
+ /* Is this device a non-zero lun of a multi-lun device */
+ /* byte 4 of the 8-byte LUN addr will contain the logical unit no. */
+ if (scsi3addr[4] != 0) {
+ /* Search through our list and find the device which */
+ /* has the same 8 byte LUN address, excepting byte 4. */
+ /* Assign the same bus and target for this new LUN. */
+ /* Use the logical unit number from the firmware. */
+ memcpy(addr1, scsi3addr, 8);
+ addr1[4] = 0;
+ for (i = 0; i < n; i++) {
+ sd = &ccissscsi[ctlr].dev[i];
+ memcpy(addr2, sd->scsi3addr, 8);
+ addr2[4] = 0;
+ /* differ only in byte 4? */
+ if (memcmp(addr1, addr2, 8) == 0) {
+ bus = sd->bus;
+ target = sd->target;
+ lun = scsi3addr[4];
+ break;
+ }
+ }
+ }
+
sd = &ccissscsi[ctlr].dev[n];
- if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0)
- return -1;
+ if (lun == 0) {
+ if (find_bus_target_lun(ctlr,
+ &sd->bus, &sd->target, &sd->lun) != 0)
+ return -1;
+ } else {
+ sd->bus = bus;
+ sd->target = target;
+ sd->lun = lun;
+ }
+ added[*nadded].bus = sd->bus;
+ added[*nadded].target = sd->target;
+ added[*nadded].lun = sd->lun;
+ (*nadded)++;
+
memcpy(&sd->scsi3addr[0], scsi3addr, 8);
sd->devtype = devtype;
ccissscsi[ctlr].ndevices++;
@@ -390,7 +435,8 @@ cciss_scsi_add_entry(int ctlr, int hostno,
}
static void
-cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
+cciss_scsi_remove_entry(int ctlr, int hostno, int entry,
+ struct scsi2map *removed, int *nremoved)
{
/* assumes hba[ctlr]->scsi_ctlr->lock is held */
int i;
@@ -398,6 +444,10 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
sd = ccissscsi[ctlr].dev[entry];
+ removed[*nremoved].bus = sd.bus;
+ removed[*nremoved].target = sd.target;
+ removed[*nremoved].lun = sd.lun;
+ (*nremoved)++;
for (i=entry;i<ccissscsi[ctlr].ndevices-1;i++)
ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];
ccissscsi[ctlr].ndevices--;
@@ -417,6 +467,26 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
(a)[1] == (b)[1] && \
(a)[0] == (b)[0])
+static void fixup_botched_add(int ctlr, char *scsi3addr)
+{
+ /* called when scsi_add_device fails in order to re-adjust */
+ /* ccissscsi[] to match the mid layer's view. */
+ unsigned long flags;
+ int i, j;
+ CPQ_TAPE_LOCK(ctlr, flags);
+ for (i = 0; i < ccissscsi[ctlr].ndevices; i++) {
+ if (memcmp(scsi3addr,
+ ccissscsi[ctlr].dev[i].scsi3addr, 8) == 0) {
+ for (j = i; j < ccissscsi[ctlr].ndevices-1; j++)
+ ccissscsi[ctlr].dev[j] =
+ ccissscsi[ctlr].dev[j+1];
+ ccissscsi[ctlr].ndevices--;
+ break;
+ }
+ }
+ CPQ_TAPE_UNLOCK(ctlr, flags);
+}
+
static int
adjust_cciss_scsi_table(int ctlr, int hostno,
struct cciss_scsi_dev_t sd[], int nsds)
@@ -429,13 +499,33 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
int i,j, found, changes=0;
struct cciss_scsi_dev_t *csd;
unsigned long flags;
+ struct scsi2map *added, *removed;
+ int nadded, nremoved;
+ struct Scsi_Host *sh = NULL;
+
+ added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+ removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+
+ if (!added || !removed) {
+ printk(KERN_WARNING "cciss%d: Out of memory in "
+ "adjust_cciss_scsi_table\n", ctlr);
+ goto free_and_out;
+ }
CPQ_TAPE_LOCK(ctlr, flags);
+ if (hostno != -1) /* if it's not the first time... */
+ sh = ((struct cciss_scsi_adapter_data_t *)
+ hba[ctlr]->scsi_ctlr)->scsi_host;
+
/* find any devices in ccissscsi[] that are not in
sd[] and remove them from ccissscsi[] */
i = 0;
+ nremoved = 0;
+ nadded = 0;
while(i<ccissscsi[ctlr].ndevices) {
csd = &ccissscsi[ctlr].dev[i];
found=0;
@@ -455,8 +545,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
/* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
ctlr, scsi_device_type(csd->devtype), hostno,
csd->bus, csd->target, csd->lun); */
- cciss_scsi_remove_entry(ctlr, hostno, i);
- /* note, i not incremented */
+ cciss_scsi_remove_entry(ctlr, hostno, i,
+ removed, &nremoved);
+ /* remove ^^^, hence i not incremented */
}
else if (found == 1) { /* device is different kind */
changes++;
@@ -464,8 +555,15 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
"(device type now %s).\n",
ctlr, hostno, csd->bus, csd->target, csd->lun,
scsi_device_type(csd->devtype));
+ cciss_scsi_remove_entry(ctlr, hostno, i,
+ removed, &nremoved);
+ /* remove ^^^, hence i not incremented */
+ if (cciss_scsi_add_entry(ctlr, hostno,
+ &sd[j].scsi3addr[0], sd[j].devtype,
+ added, &nadded) != 0)
+ /* we just removed one, so add can't fail. */
+ BUG();
csd->devtype = sd[j].devtype;
- i++; /* so just move along. */
} else /* device is same as it ever was, */
i++; /* so just move along. */
}
@@ -489,7 +587,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
if (!found) {
changes++;
if (cciss_scsi_add_entry(ctlr, hostno,
- &sd[i].scsi3addr[0], sd[i].devtype) != 0)
+
+ &sd[i].scsi3addr[0], sd[i].devtype,
+ added, &nadded) != 0)
break;
} else if (found == 1) {
/* should never happen... */
@@ -501,9 +601,50 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
}
CPQ_TAPE_UNLOCK(ctlr, flags);
- if (!changes)
- printk("cciss%d: No device changes detected.\n", ctlr);
+ /* Don't notify scsi mid layer of any changes the first time through */
+ /* (or if there are no changes) scsi_scan_host will do it later the */
+ /* first time through. */
+ if (hostno == -1 || !changes)
+ goto free_and_out;
+
+ /* Notify scsi mid layer of any removed devices */
+ for (i = 0; i < nremoved; i++) {
+ struct scsi_device *sdev =
+ scsi_device_lookup(sh, removed[i].bus,
+ removed[i].target, removed[i].lun);
+ if (sdev != NULL) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else {
+ /* We don't expect to get here. */
+ /* future cmds to this device will get selection */
+ /* timeout as if the device was gone. */
+ printk(KERN_WARNING "cciss%d: didn't find "
+ "c%db%dt%dl%d\n for removal.",
+ ctlr, hostno, removed[i].bus,
+ removed[i].target, removed[i].lun);
+ }
+ }
+
+ /* Notify scsi mid layer of any added devices */
+ for (i = 0; i < nadded; i++) {
+ int rc;
+ rc = scsi_add_device(sh, added[i].bus,
+ added[i].target, added[i].lun);
+ if (rc == 0)
+ continue;
+ printk(KERN_WARNING "cciss%d: scsi_add_device "
+ "c%db%dt%dl%d failed, device not added.\n",
+ ctlr, hostno,
+ added[i].bus, added[i].target, added[i].lun);
+ /* now we have to remove it from ccissscsi, */
+ /* since it didn't get added to scsi mid layer */
+ fixup_botched_add(ctlr, added[i].scsi3addr);
+ }
+free_and_out:
+ kfree(added);
+ kfree(removed);
return 0;
}
@@ -1355,32 +1496,6 @@ cciss_unregister_scsi(int ctlr)
}
static int
-cciss_register_scsi(int ctlr)
-{
- unsigned long flags;
-
- CPQ_TAPE_LOCK(ctlr, flags);
-
- /* Since this is really a block driver, the SCSI core may not be
- initialized at init time, in which case, calling scsi_register_host
- would hang. Instead, we do it later, via /proc filesystem
- and rc scripts, when we know SCSI core is good to go. */
-
- /* Only register if SCSI devices are detected. */
- if (ccissscsi[ctlr].ndevices != 0) {
- ((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->registered = 1;
- CPQ_TAPE_UNLOCK(ctlr, flags);
- return cciss_scsi_detect(ctlr);
- }
- CPQ_TAPE_UNLOCK(ctlr, flags);
- printk(KERN_INFO
- "cciss%d: No appropriate SCSI device detected, "
- "SCSI subsystem not engaged.\n", ctlr);
- return 0;
-}
-
-static int
cciss_engage_scsi(int ctlr)
{
struct cciss_scsi_adapter_data_t *sa;
@@ -1391,15 +1506,15 @@ cciss_engage_scsi(int ctlr)
sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
stk = &sa->cmd_stack;
- if (((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->registered) {
+ if (sa->registered) {
printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
return ENXIO;
}
+ sa->registered = 1;
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
cciss_update_non_disk_devices(ctlr, -1);
- cciss_register_scsi(ctlr);
+ cciss_scsi_detect(ctlr);
return 0;
}
@@ -1493,7 +1608,5 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
/* If no tape support, then these become defined out of existence */
#define cciss_scsi_setup(cntl_num)
-#define cciss_unregister_scsi(ctlr)
-#define cciss_register_scsi(ctlr)
#endif /* CONFIG_CISS_SCSI_TAPE */