summaryrefslogtreecommitdiff
path: root/drivers/char/ipmi/ipmi_si_intf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ipmi/ipmi_si_intf.c')
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c109
1 files changed, 102 insertions, 7 deletions
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index f6646ed3047e..518585c1ce94 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -263,6 +263,11 @@ struct smi_info {
bool supports_event_msg_buff;
/*
+ * Can we clear the global enables receive irq bit?
+ */
+ bool cannot_clear_recv_irq_bit;
+
+ /*
* Did we get an attention that we did not handle?
*/
bool got_attn;
@@ -461,6 +466,9 @@ static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val)
* allocate messages, we just leave them in the BMC and run the system
* polled until we can allocate some memory. Once we have some
* memory, we will re-enable the interrupt.
+ *
+ * Note that we cannot just use disable_irq(), since the interrupt may
+ * be shared.
*/
static inline bool disable_si_irq(struct smi_info *smi_info)
{
@@ -549,20 +557,15 @@ static u8 current_global_enables(struct smi_info *smi_info, u8 base,
if (smi_info->supports_event_msg_buff)
enables |= IPMI_BMC_EVT_MSG_BUFF;
- else
- enables &= ~IPMI_BMC_EVT_MSG_BUFF;
- if (smi_info->irq && !smi_info->interrupt_disabled)
+ if ((smi_info->irq && !smi_info->interrupt_disabled) ||
+ smi_info->cannot_clear_recv_irq_bit)
enables |= IPMI_BMC_RCV_MSG_INTR;
- else
- enables &= ~IPMI_BMC_RCV_MSG_INTR;
if (smi_info->supports_event_msg_buff &&
smi_info->irq && !smi_info->interrupt_disabled)
enables |= IPMI_BMC_EVT_MSG_INTR;
- else
- enables &= ~IPMI_BMC_EVT_MSG_INTR;
*irq_on = enables & (IPMI_BMC_EVT_MSG_INTR | IPMI_BMC_RCV_MSG_INTR);
@@ -2900,6 +2903,96 @@ static int try_get_dev_id(struct smi_info *smi_info)
return rv;
}
+/*
+ * Some BMCs do not support clearing the receive irq bit in the global
+ * enables (even if they don't support interrupts on the BMC). Check
+ * for this and handle it properly.
+ */
+static void check_clr_rcv_irq(struct smi_info *smi_info)
+{
+ unsigned char msg[3];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp) {
+ printk(KERN_WARNING PFX "Out of memory allocating response for"
+ " global enables command, cannot check recv irq bit"
+ " handling.\n");
+ return;
+ }
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING PFX "Error getting response from get"
+ " global enables command, cannot check recv irq bit"
+ " handling.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 4 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD ||
+ resp[2] != 0) {
+ printk(KERN_WARNING PFX "Invalid return from get global"
+ " enables command, cannot check recv irq bit"
+ " handling.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if ((resp[3] & IPMI_BMC_RCV_MSG_INTR) == 0)
+ /* Already clear, should work ok. */
+ goto out;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = resp[3] & ~IPMI_BMC_RCV_MSG_INTR;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING PFX "Error getting response from set"
+ " global enables command, cannot check recv irq bit"
+ " handling.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 3 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+ printk(KERN_WARNING PFX "Invalid return from get global"
+ " enables command, cannot check recv irq bit"
+ " handling.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[2] != 0) {
+ /*
+ * An error when setting the event buffer bit means
+ * clearing the bit is not supported.
+ */
+ printk(KERN_WARNING PFX "The BMC does not support clearing"
+ " the recv irq bit, compensating, but the BMC needs to"
+ " be fixed.\n");
+ smi_info->cannot_clear_recv_irq_bit = true;
+ }
+ out:
+ kfree(resp);
+}
+
static int try_enable_event_buffer(struct smi_info *smi_info)
{
unsigned char msg[3];
@@ -3395,6 +3488,8 @@ static int try_smi_init(struct smi_info *new_smi)
goto out_err;
}
+ check_clr_rcv_irq(new_smi);
+
setup_oem_data_handler(new_smi);
setup_xaction_handlers(new_smi);