diff options
Diffstat (limited to 'drivers/char/mxser_new.c')
| -rw-r--r-- | drivers/char/mxser_new.c | 2817 |
1 files changed, 0 insertions, 2817 deletions
diff --git a/drivers/char/mxser_new.c b/drivers/char/mxser_new.c deleted file mode 100644 index 081c84c7b548..000000000000 --- a/drivers/char/mxser_new.c +++ /dev/null @@ -1,2817 +0,0 @@ -/* - * mxser.c -- MOXA Smartio/Industio family multiport serial driver. - * - * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com.tw). - * Copyright (C) 2006-2007 Jiri Slaby <jirislaby@gmail.com> - * - * This code is loosely based on the 1.8 moxa driver which is based on - * Linux serial driver, written by Linus Torvalds, Theodore T'so and - * others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com. - * - Fixed x86_64 cleanness - * - Fixed sleep with spinlock held in mxser_send_break - */ - -#include <linux/module.h> -#include <linux/autoconf.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/serial_reg.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/gfp.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> - -#include "mxser_new.h" - -#define MXSER_VERSION "2.0.2" /* 1.10 */ -#define MXSERMAJOR 174 -#define MXSERCUMAJOR 175 - -#define MXSER_BOARDS 4 /* Max. boards */ -#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ -#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) -#define MXSER_ISR_PASS_LIMIT 100 - -#define MXSER_ERR_IOADDR -1 -#define MXSER_ERR_IRQ -2 -#define MXSER_ERR_IRQ_CONFLIT -3 -#define MXSER_ERR_VECTOR -4 - -/*CheckIsMoxaMust return value*/ -#define MOXA_OTHER_UART 0x00 -#define MOXA_MUST_MU150_HWID 0x01 -#define MOXA_MUST_MU860_HWID 0x02 - -#define WAKEUP_CHARS 256 - -#define UART_MCR_AFE 0x20 -#define UART_LSR_SPECIAL 0x1E - -#define PCI_DEVICE_ID_CB108 0x1080 -#define PCI_DEVICE_ID_CB114 0x1142 -#define PCI_DEVICE_ID_CB134I 0x1341 -#define PCI_DEVICE_ID_CP138U 0x1380 -#define PCI_DEVICE_ID_POS104UL 0x1044 - - -#define C168_ASIC_ID 1 -#define C104_ASIC_ID 2 -#define C102_ASIC_ID 0xB -#define CI132_ASIC_ID 4 -#define CI134_ASIC_ID 3 -#define CI104J_ASIC_ID 5 - -#define MXSER_HIGHBAUD 1 -#define MXSER_HAS2 2 - -/* This is only for PCI */ -static const struct { - int type; - int tx_fifo; - int rx_fifo; - int xmit_fifo_size; - int rx_high_water; - int rx_trigger; - int rx_low_water; - long max_baud; -} Gpci_uart_info[] = { - {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, - {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, - {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} -}; -#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) - -struct mxser_cardinfo { - unsigned int nports; - char *name; - unsigned int flags; -}; - -static const struct mxser_cardinfo mxser_cards[] = { -/* 0*/ { 8, "C168 series", }, - { 4, "C104 series", }, - { 4, "CI-104J series", }, - { 8, "C168H/PCI series", }, - { 4, "C104H/PCI series", }, -/* 5*/ { 4, "C102 series", MXSER_HAS2 }, /* C102-ISA */ - { 4, "CI-132 series", MXSER_HAS2 }, - { 4, "CI-134 series", }, - { 2, "CP-132 series", }, - { 4, "CP-114 series", }, -/*10*/ { 4, "CT-114 series", }, - { 2, "CP-102 series", MXSER_HIGHBAUD }, - { 4, "CP-104U series", }, - { 8, "CP-168U series", }, - { 2, "CP-132U series", }, -/*15*/ { 4, "CP-134U series", }, - { 4, "CP-104JU series", }, - { 8, "Moxa UC7000 Serial", }, /* RC7000 */ - { 8, "CP-118U series", }, - { 2, "CP-102UL series", }, -/*20*/ { 2, "CP-102U series", }, - { 8, "CP-118EL series", }, - { 8, "CP-168EL series", }, - { 4, "CP-104EL series", }, - { 8, "CB-108 series", }, -/*25*/ { 4, "CB-114 series", }, - { 4, "CB-134I series", }, - { 8, "CP-138U series", }, - { 4, "POS-104UL series", } -}; - -/* driver_data correspond to the lines in the structure above - see also ISA probe function before you change something */ -static struct pci_device_id mxser_pcibrds[] = { - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, - { } -}; -MODULE_DEVICE_TABLE(pci, mxser_pcibrds); - -static int mxvar_baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, - 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 -}; -static unsigned int mxvar_baud_table1[] = { - 0, B50, B75, B110, B134, B150, B200, B300, B600, B1200, B1800, B2400, - B4800, B9600, B19200, B38400, B57600, B115200, B230400, B460800, B921600 -}; -#define BAUD_TABLE_NO ARRAY_SIZE(mxvar_baud_table) - -#define B_SPEC B2000000 - -static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 }; -static int ttymajor = MXSERMAJOR; -static int calloutmajor = MXSERCUMAJOR; - -/* Variables for insmod */ - -MODULE_AUTHOR("Casper Yang"); -MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -module_param_array(ioaddr, int, NULL, 0); -module_param(ttymajor, int, 0); -MODULE_LICENSE("GPL"); - -struct mxser_log { - int tick; - unsigned long rxcnt[MXSER_PORTS]; - unsigned long txcnt[MXSER_PORTS]; -}; - - -struct mxser_mon { - unsigned long rxcnt; - unsigned long txcnt; - unsigned long up_rxcnt; - unsigned long up_txcnt; - int modem_status; - unsigned char hold_reason; -}; - -struct mxser_mon_ext { - unsigned long rx_cnt[32]; - unsigned long tx_cnt[32]; - unsigned long up_rxcnt[32]; - unsigned long up_txcnt[32]; - int modem_status[32]; - - long baudrate[32]; - int databits[32]; - int stopbits[32]; - int parity[32]; - int flowctrl[32]; - int fifo[32]; - int iftype[32]; -}; - -struct mxser_board; - -struct mxser_port { - struct mxser_board *board; - struct tty_struct *tty; - - unsigned long ioaddr; - unsigned long opmode_ioaddr; - int max_baud; - - int rx_high_water; - int rx_trigger; /* Rx fifo trigger level */ - int rx_low_water; - int baud_base; /* max. speed */ - long realbaud; - int type; /* UART type */ - int flags; /* defined in tty.h */ - int speed; - - int x_char; /* xon/xoff character */ - int IER; /* Interrupt Enable Register */ - int MCR; /* Modem control register */ - - unsigned char stop_rx; - unsigned char ldisc_stop_rx; - - int custom_divisor; - int close_delay; - unsigned short closing_wait; - unsigned char err_shadow; - unsigned long event; - - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - struct async_icount icount; /* kernel counters for 4 input interrupts */ - int timeout; - - int read_status_mask; - int ignore_status_mask; - int xmit_fifo_size; - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - - struct ktermios normal_termios; - - struct mxser_mon mon_data; - - spinlock_t slock; - wait_queue_head_t open_wait; - wait_queue_head_t delta_msr_wait; -}; - -struct mxser_board { - unsigned int idx; - int irq; - const struct mxser_cardinfo *info; - unsigned long vector; - unsigned long vector_mask; - - int chip_flag; - int uart_type; - - struct mxser_port ports[MXSER_PORTS_PER_BOARD]; -}; - -struct mxser_mstatus { - tcflag_t cflag; - int cts; - int dsr; - int ri; - int dcd; -}; - -static struct mxser_mstatus GMStatus[MXSER_PORTS]; - -static int mxserBoardCAP[MXSER_BOARDS] = { - 0, 0, 0, 0 - /* 0x180, 0x280, 0x200, 0x320 */ -}; - -static struct mxser_board mxser_boards[MXSER_BOARDS]; -static struct tty_driver *mxvar_sdriver; -static struct mxser_log mxvar_log; -static int mxvar_diagflag; -static unsigned char mxser_msr[MXSER_PORTS + 1]; -static struct mxser_mon_ext mon_data_ext; -static int mxser_set_baud_method[MXSER_PORTS + 1]; - -#ifdef CONFIG_PCI -static int __devinit CheckIsMoxaMust(int io) -{ - u8 oldmcr, hwid; - int i; - - outb(0, io + UART_LCR); - DISABLE_MOXA_MUST_ENCHANCE_MODE(io); - oldmcr = inb(io + UART_MCR); - outb(0, io + UART_MCR); - SET_MOXA_MUST_XON1_VALUE(io, 0x11); - if ((hwid = inb(io + UART_MCR)) != 0) { - outb(oldmcr, io + UART_MCR); - return MOXA_OTHER_UART; - } - - GET_MOXA_MUST_HARDWARE_ID(io, &hwid); - for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ - if (hwid == Gpci_uart_info[i].type) - return (int)hwid; - } - return MOXA_OTHER_UART; -} -#endif - -static void process_txrx_fifo(struct mxser_port *info) -{ - int i; - - if ((info->type == PORT_16450) || (info->type == PORT_8250)) { - info->rx_trigger = 1; - info->rx_high_water = 1; - info->rx_low_water = 1; - info->xmit_fifo_size = 1; - } else - for (i = 0; i < UART_INFO_NUM; i++) - if (info->board->chip_flag == Gpci_uart_info[i].type) { - info->rx_trigger = Gpci_uart_info[i].rx_trigger; - info->rx_low_water = Gpci_uart_info[i].rx_low_water; - info->rx_high_water = Gpci_uart_info[i].rx_high_water; - info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; - break; - } -} - -static unsigned char mxser_get_msr(int baseaddr, int mode, int port) -{ - unsigned char status = 0; - - status = inb(baseaddr + UART_MSR); - - mxser_msr[port] &= 0x0F; - mxser_msr[port] |= status; - status = mxser_msr[port]; - if (mode) - mxser_msr[port] = 0; - - return status; -} - -static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, - struct mxser_port *port) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - test_bit(TTY_IO_ERROR, &tty->flags)) { - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * mxser_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - spin_lock_irqsave(&port->slock, flags); - if (!tty_hung_up_p(filp)) - port->count--; - spin_unlock_irqrestore(&port->slock, flags); - port->blocked_open++; - while (1) { - spin_lock_irqsave(&port->slock, flags); - outb(inb(port->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR); - spin_unlock_irqrestore(&port->slock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { - if (port->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || - (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - if (retval) - return retval; - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static int mxser_set_baud(struct mxser_port *info, long newspd) -{ - unsigned int i; - int quot = 0; - unsigned char cval; - int ret = 0; - - if (!info->tty || !info->tty->termios) - return ret; - - if (!(info->ioaddr)) - return ret; - - if (newspd > info->max_baud) - return 0; - - info->realbaud = newspd; - for (i = 0; i < BAUD_TABLE_NO; i++) - if (newspd == mxvar_baud_table[i]) - break; - if (i == BAUD_TABLE_NO) { - quot = info->baud_base / info->speed; - if (info->speed <= 0 || info->speed > info->max_baud) - quot = 0; - } else { - if (newspd == 134) { - quot = (2 * info->baud_base / 269); - } else if (newspd) { - quot = info->baud_base / newspd; - if (quot == 0) - quot = 1; - } else { - quot = 0; - } - } - - info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); - info->timeout += HZ / 50; /* Add .02 seconds of slop */ - - if (quot) { - info->MCR |= UART_MCR_DTR; - outb(info->MCR, info->ioaddr + UART_MCR); - } else { - info->MCR &= ~UART_MCR_DTR; - outb(info->MCR, info->ioaddr + UART_MCR); - return ret; - } - - cval = inb(info->ioaddr + UART_LCR); - - outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ - - outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ - outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ - outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ - - if (i == BAUD_TABLE_NO) { - quot = info->baud_base % info->speed; - quot *= 8; - if ((quot % info->speed) > (info->speed / 2)) { - quot /= info->speed; - quot++; - } else { - quot /= info->speed; - } - SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, quot); - } else - SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, 0); - - return ret; -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static int mxser_change_speed(struct mxser_port *info, - struct ktermios *old_termios) -{ - unsigned cflag, cval, fcr; - int ret = 0; - unsigned char status; - long baud; - - if (!info->tty || !info->tty->termios) - return ret; - cflag = info->tty->termios->c_cflag; - if (!(info->ioaddr)) - return ret; - - if (mxser_set_baud_method[info->tty->index] == 0) { - if ((cflag & CBAUD) == B_SPEC) - baud = info->speed; - else - baud = tty_get_baud_rate(info->tty); - mxser_set_baud(info, baud); - } - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; - break; - case CS6: - cval = 0x01; - break; - case CS7: - cval = 0x02; - break; - case CS8: - cval = 0x03; - break; - default: - cval = 0x00; - break; /* too keep GCC shut... */ - } - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; - - if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->board->chip_flag) { - fcr = UART_FCR_ENABLE_FIFO; - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else - fcr = 0; - } else { - fcr = UART_FCR_ENABLE_FIFO; - if (info->board->chip_flag) { - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else { - switch (info->rx_trigger) { - case 1: - fcr |= UART_FCR_TRIGGER_1; - break; - case 4: - fcr |= UART_FCR_TRIGGER_4; - break; - case 8: - fcr |= UART_FCR_TRIGGER_8; - break; - default: - fcr |= UART_FCR_TRIGGER_14; - break; - } - } - } - - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - info->MCR &= ~UART_MCR_AFE; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - if ((info->type == PORT_16550A) || (info->board->chip_flag)) { - info->MCR |= UART_MCR_AFE; - } else { - status = inb(info->ioaddr + UART_MSR); - if (info->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; - if (info->type != PORT_16550A && - !info->board->chip_flag) { - outb(info->IER & ~UART_IER_THRI, - info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - tty_wakeup(info->tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && - (!info->board->chip_flag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - } - } - } - } else { - info->flags &= ~ASYNC_CTS_FLOW; - } - outb(info->MCR, info->ioaddr + UART_MCR); - if (cflag & CLOCAL) { - info->flags &= ~ASYNC_CHECK_CD; - } else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - outb(info->IER, info->ioaddr + UART_IER); - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; - - if (I_IGNBRK(info->tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->tty)) { - info->ignore_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - info->read_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - } - } - if (info->board->chip_flag) { - SET_MOXA_MUST_XON1_VALUE(info->ioaddr, START_CHAR(info->tty)); - SET_MOXA_MUST_XOFF1_VALUE(info->ioaddr, STOP_CHAR(info->tty)); - if (I_IXON(info->tty)) { - ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - } else { - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - } - if (I_IXOFF(info->tty)) { - ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - } else { - DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - } - } - - - outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ - outb(cval, info->ioaddr + UART_LCR); - - return ret; -} - -static void mxser_check_modem_status(struct mxser_port *port, int status) -{ - /* update input line counters */ - if (status & UART_MSR_TERI) - port->icount.rng++; - if (status & UART_MSR_DDSR) - port->icount.dsr++; - if (status & UART_MSR_DDCD) - port->icount.dcd++; - if (status & UART_MSR_DCTS) - port->icount.cts++; - port->mon_data.modem_status = status; - wake_up_interruptible(&port->delta_msr_wait); - - if ((port->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { - if (status & UART_MSR_DCD) - wake_up_interruptible(&port->open_wait); - } - - if (port->flags & ASYNC_CTS_FLOW) { - if (port->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - port->tty->hw_stopped = 0; - - if ((port->type != PORT_16550A) && - (!port->board->chip_flag)) { - outb(port->IER & ~UART_IER_THRI, - port->ioaddr + UART_IER); - port->IER |= UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - tty_wakeup(port->tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - port->tty->hw_stopped = 1; - if (port->type != PORT_16550A && - !port->board->chip_flag) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - } - } - } -} - -static int mxser_startup(struct mxser_port *info) -{ - unsigned long page; - unsigned long flags; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - spin_lock_irqsave(&info->slock, flags); - - if (info->flags & ASYNC_INITIALIZED) { - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - - if (!info->ioaddr || !info->type) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - if (info->xmit_buf) - free_page(page); - else - info->xmit_buf = (unsigned char *) page; - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in mxser_change_speed()) - */ - if (info->board->chip_flag) - outb((UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); - else - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); - - /* - * At this point there's no way the LSR could still be 0xFF; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (inb(info->ioaddr + UART_LSR) == 0xff) { - spin_unlock_irqrestore(&info->slock, flags); - if (capable(CAP_SYS_ADMIN)) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - return 0; - } else - return -ENODEV; - } - - /* - * Clear the interrupt registers. - */ - (void) inb(info->ioaddr + UART_LSR); - (void) inb(info->ioaddr + UART_RX); - (void) inb(info->ioaddr + UART_IIR); - (void) inb(info->ioaddr + UART_MSR); - - /* - * Now, initialize the UART - */ - outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ - info->MCR = UART_MCR_DTR | UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - - /* - * Finally, enable interrupts - */ - info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - - if (info->board->chip_flag) - info->IER |= MOXA_MUST_IER_EGDAI; - outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ - - /* - * And clear the interrupt registers again for luck. - */ - (void) inb(info->ioaddr + UART_LSR); - (void) inb(info->ioaddr + UART_RX); - (void) inb(info->ioaddr + UART_IIR); - (void) inb(info->ioaddr + UART_MSR); - - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - mxser_change_speed(info, NULL); - info->flags |= ASYNC_INITIALIZED; - spin_unlock_irqrestore(&info->slock, flags); - - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts maybe disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void mxser_shutdown(struct mxser_port *info) -{ - unsigned long flags; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - spin_lock_irqsave(&info->slock, flags); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->delta_msr_wait); - - /* - * Free the IRQ, if necessary - */ - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - - info->IER = 0; - outb(0x00, info->ioaddr + UART_IER); - - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); - outb(info->MCR, info->ioaddr + UART_MCR); - - /* clear Rx/Tx FIFO's */ - if (info->board->chip_flag) - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE, - info->ioaddr + UART_FCR); - else - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - info->ioaddr + UART_FCR); - - /* read data port to reset things */ - (void) inb(info->ioaddr + UART_RX); - - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - - if (info->board->chip_flag) - SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); - - spin_unlock_irqrestore(&info->slock, flags); -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int mxser_open(struct tty_struct *tty, struct file *filp) -{ - struct mxser_port *info; - unsigned long flags; - int retval, line; - - line = tty->index; - if (line == MXSER_PORTS) - return 0; - if (line < 0 || line > MXSER_PORTS) - return -ENODEV; - info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; - if (!info->ioaddr) - return -ENODEV; - - tty->driver_data = info; - info->tty = tty; - /* - * Start up serial port - */ - spin_lock_irqsave(&info->slock, flags); - info->count++; - spin_unlock_irqrestore(&info->slock, flags); - retval = mxser_startup(info); - if (retval) - return retval; - - retval = mxser_block_til_ready(tty, filp, info); - if (retval) - return retval; - - /* unmark here for very high baud rate (ex. 921600 bps) used */ - tty->low_latency = 1; - return 0; -} - -/* - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - */ -static void mxser_close(struct tty_struct *tty, struct file *filp) -{ - struct mxser_port *info = tty->driver_data; - - unsigned long timeout; - unsigned long flags; - - if (tty->index == MXSER_PORTS) - return; - if (!info) - return; - - spin_lock_irqsave(&info->slock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "mxser_close: bad serial port count; " - "tty->count is 1, info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk(KERN_ERR "mxser_close: bad serial port count for " - "ttys%d: %d\n", tty->index, info->count); - info->count = 0; - } - if (info->count) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - info->flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); - /* - * Save the termios structure, since this port may have - * separate termios for callout and dialin. - */ - if (info->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->IER &= ~UART_IER_RLSI; - if (info->board->chip_flag) - info->IER &= ~MOXA_MUST_RECV_ISR; - - if (info->flags & ASYNC_INITIALIZED) { - outb(info->IER, info->ioaddr + UART_IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { - schedule_timeout_interruptible(5); - if (time_after(jiffies, timeout)) - break; - } - } - mxser_shutdown(info); - - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - - tty_ldisc_flush(tty); - - tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) - schedule_timeout_interruptible(info->close_delay); - wake_up_interruptible(&info->open_wait); - } - - info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); -} - -static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - int c, total = 0; - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (!info->xmit_buf) - return 0; - - while (1) { - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - spin_lock_irqsave(&info->slock, flags); - info->xmit_head = (info->xmit_head + c) & - (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->slock, flags); - - buf += c; - count -= c; - total += c; - } - - if (info->xmit_cnt && !tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - (info->board->chip_flag)) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } - return total; -} - -static void mxser_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (!info->xmit_buf) - return; - - if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) - return; - - spin_lock_irqsave(&info->slock, flags); - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; - spin_unlock_irqrestore(&info->slock, flags); - if (!tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - info->board->chip_flag) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } -} - - -static void mxser_flush_chars(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (info->xmit_cnt <= 0 || - tty->stopped || - !info->xmit_buf || - (tty->hw_stopped && - (info->type != PORT_16550A) && - (!info->board->chip_flag) - )) - return; - - spin_lock_irqsave(&info->slock, flags); - - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - - spin_unlock_irqrestore(&info->slock, flags); -} - -static int mxser_write_room(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - int ret; - - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} - -static int mxser_chars_in_buffer(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - return info->xmit_cnt; -} - -static void mxser_flush_buffer(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - char fcr; - unsigned long flags; - - - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - fcr = inb(info->ioaddr + UART_FCR); - outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); - outb(fcr, info->ioaddr + UART_FCR); - - spin_unlock_irqrestore(&info->slock, flags); - - tty_wakeup(tty); -} - -/* - * ------------------------------------------------------------ - * friends of mxser_ioctl() - * ------------------------------------------------------------ - */ -static int mxser_get_serial_info(struct mxser_port *info, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->tty->index; - tmp.port = info->ioaddr; - tmp.irq = info->board->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - tmp.hub6 = 0; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int mxser_set_serial_info(struct mxser_port *info, - struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - unsigned long sl_flags; - unsigned int flags; - int retval = 0; - - if (!new_info || !info->ioaddr) - return -EFAULT; - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - if ((new_serial.irq != info->board->irq) || - (new_serial.port != info->ioaddr) || - (new_serial.custom_divisor != info->custom_divisor) || - (new_serial.baud_base != info->baud_base)) - return -EPERM; - - flags = info->flags & ASYNC_SPD_MASK; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - } else { - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay * HZ / 100; - info->closing_wait = new_serial.closing_wait * HZ / 100; - info->tty->low_latency = - (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - info->tty->low_latency = 0; - } - - info->type = new_serial.type; - - process_txrx_fifo(info); - - if (info->flags & ASYNC_INITIALIZED) { - if (flags != (info->flags & ASYNC_SPD_MASK)) { - spin_lock_irqsave(&info->slock, sl_flags); - mxser_change_speed(info, NULL); - spin_unlock_irqrestore(&info->slock, sl_flags); - } - } else - retval = mxser_startup(info); - - return retval; -} - -/* - * mxser_get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int mxser_get_lsr_info(struct mxser_port *info, - unsigned int __user *value) -{ - unsigned char status; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->ioaddr + UART_LSR); - spin_unlock_irqrestore(&info->slock, flags); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} - -/* - * This routine sends a break character out the serial port. - */ -static void mxser_send_break(struct mxser_port *info, int duration) -{ - unsigned long flags; - - if (!info->ioaddr) - return; - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); - schedule_timeout(duration); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); -} - -static int mxser_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct mxser_port *info = tty->driver_data; - unsigned char control, status; - unsigned long flags; - - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - control = info->MCR; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->ioaddr + UART_MSR); - if (status & UART_MSR_ANY_DELTA) - mxser_check_modem_status(info, status); - spin_unlock_irqrestore(&info->slock, flags); - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | - ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | - ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | - ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | - ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | - ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} - -static int mxser_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - spin_lock_irqsave(&info->slock, flags); - - if (set & TIOCM_RTS) - info->MCR |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->MCR |= UART_MCR_DTR; - - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - - outb(info->MCR, info->ioaddr + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} - -static int __init mxser_program_mode(int port) -{ - int id, i, j, n; - - outb(0, port); - outb(0, port); - outb(0, port); - (void)inb(port); - (void)inb(port); - outb(0, port); - (void)inb(port); - - id = inb(port + 1) & 0x1F; - if ((id != C168_ASIC_ID) && - (id != C104_ASIC_ID) && - (id != C102_ASIC_ID) && - (id != CI132_ASIC_ID) && - (id != CI134_ASIC_ID) && - (id != CI104J_ASIC_ID)) - return -1; - for (i = 0, j = 0; i < 4; i++) { - n = inb(port + 2); - if (n == 'M') { - j = 1; - } else if ((j == 1) && (n == 1)) { - j = 2; - break; - } else - j = 0; - } - if (j != 2) - id = -2; - return id; -} - -static void __init mxser_normal_mode(int port) -{ - int i, n; - - outb(0xA5, port + 1); - outb(0x80, port + 3); - outb(12, port + 0); /* 9600 bps */ - outb(0, port + 1); - outb(0x03, port + 3); /* 8 data bits */ - outb(0x13, port + 4); /* loop back mode */ - for (i = 0; i < 16; i++) { - n = inb(port + 5); - if ((n & 0x61) == 0x60) - break; - if ((n & 1) == 1) - (void)inb(port); - } - outb(0x00, port + 4); -} - -#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ -#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ -#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ -#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ -#define EN_CCMD 0x000 /* Chip's command register */ -#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ -#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ -#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ -#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ -#define EN0_DCFG 0x00E /* Data configuration reg WR */ -#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ -#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ -#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ -static int __init mxser_read_register(int port, unsigned short *regs) -{ - int i, k, value, id; - unsigned int j; - - id = mxser_program_mode(port); - if (id < 0) - return id; - for (i = 0; i < 14; i++) { - k = (i & 0x3F) | 0x180; - for (j = 0x100; j > 0; j >>= 1) { - outb(CHIP_CS, port); - if (k & j) { - outb(CHIP_CS | CHIP_DO, port); - outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ - } else { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ - } - } - (void)inb(port); - value = 0; - for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); - if (inb(port) & CHIP_DI) - value |= j; - } - regs[i] = value; - outb(0, port); - } - mxser_normal_mode(port); - return id; -} - -static int mxser_ioctl_special(unsigned int cmd, void __user *argp) -{ - struct mxser_port *port; - int result, status; - unsigned int i, j; - - switch (cmd) { - case MOXA_GET_CONF: -/* if (copy_to_user(argp, mxsercfg, - sizeof(struct mxser_hwconf) * 4)) - return -EFAULT; - return 0;*/ - return -ENXIO; - case MOXA_GET_MAJOR: - if (copy_to_user(argp, &ttymajor, sizeof(int))) - return -EFAULT; - return 0; - - case MOXA_GET_CUMAJOR: - if (copy_to_user(argp, &calloutmajor, sizeof(int))) - return -EFAULT; - return 0; - - case MOXA_CHKPORTENABLE: - result = 0; - - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) - if (mxser_boards[i].ports[j].ioaddr) - result |= (1 << i); - - return put_user(result, (unsigned long __user *)argp); - case MOXA_GETDATACOUNT: - if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) - return -EFAULT; - return 0; - case MOXA_GETMSTATUS: - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { - port = &mxser_boards[i].ports[j]; - - GMStatus[i].ri = 0; - if (!port->ioaddr) { - GMStatus[i].dcd = 0; - GMStatus[i].dsr = 0; - GMStatus[i].cts = 0; - continue; - } - - if (!port->tty || !port->tty->termios) - GMStatus[i].cflag = - port->normal_termios.c_cflag; - else - GMStatus[i].cflag = - port->tty->termios->c_cflag; - - status = inb(port->ioaddr + UART_MSR); - if (status & 0x80 /*UART_MSR_DCD */ ) - GMStatus[i].dcd = 1; - else - GMStatus[i].dcd = 0; - - if (status & 0x20 /*UART_MSR_DSR */ ) - GMStatus[i].dsr = 1; - else - GMStatus[i].dsr = 0; - - - if (status & 0x10 /*UART_MSR_CTS */ ) - GMStatus[i].cts = 1; - else - GMStatus[i].cts = 0; - } - if (copy_to_user(argp, GMStatus, - sizeof(struct mxser_mstatus) * MXSER_PORTS)) - return -EFAULT; - return 0; - case MOXA_ASPP_MON_EXT: { - int p, shiftbit; - unsigned long opmode; - unsigned cflag, iflag; - - for (i = 0; i < MXSER_BOARDS; i++) - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { - port = &mxser_boards[i].ports[j]; - if (!port->ioaddr) - continue; - - status = mxser_get_msr(port->ioaddr, 0, i); - - if (status & UART_MSR_TERI) - port->icount.rng++; - if (status & UART_MSR_DDSR) - port->icount.dsr++; - if (status & UART_MSR_DDCD) - port->icount.dcd++; - if (status & UART_MSR_DCTS) - port->icount.cts++; - - port->mon_data.modem_status = status; - mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt; - mon_data_ext.tx_cnt[i] = port->mon_data.txcnt; - mon_data_ext.up_rxcnt[i] = - port->mon_data.up_rxcnt; - mon_data_ext.up_txcnt[i] = - port->mon_data.up_txcnt; - mon_data_ext.modem_status[i] = - port->mon_data.modem_status; - mon_data_ext.baudrate[i] = port->realbaud; - - if (!port->tty || !port->tty->termios) { - cflag = port->normal_termios.c_cflag; - iflag = port->normal_termios.c_iflag; - } else { - cflag = port->tty->termios->c_cflag; - iflag = port->tty->termios->c_iflag; - } - - mon_data_ext.databits[i] = cflag & CSIZE; - - mon_data_ext.stopbits[i] = cflag & CSTOPB; - - mon_data_ext.parity[i] = - cflag & (PARENB | PARODD | CMSPAR); - - mon_data_ext.flowctrl[i] = 0x00; - - if (cflag & CRTSCTS) - mon_data_ext.flowctrl[i] |= 0x03; - - if (iflag & (IXON | IXOFF)) - mon_data_ext.flowctrl[i] |= 0x0C; - - if (port->type == PORT_16550A) - mon_data_ext.fifo[i] = 1; - else - mon_data_ext.fifo[i] = 0; - - p = i % 4; - shiftbit = p * 2; - opmode = inb(port->opmode_ioaddr) >> shiftbit; - opmode &= OP_MODE_MASK; - - mon_data_ext.iftype[i] = opmode; - - } - if (copy_to_user(argp, &mon_data_ext, - sizeof(mon_data_ext))) - return -EFAULT; - - return 0; - - } default: - return -ENOIOCTLCMD; - } - return 0; -} - -static int mxser_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct mxser_port *info = tty->driver_data; - struct async_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; - unsigned long templ; - unsigned long flags; - unsigned int i; - void __user *argp = (void __user *)arg; - int retval; - - if (tty->index == MXSER_PORTS) - return mxser_ioctl_special(cmd, argp); - - if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - int p; - unsigned long opmode; - static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; - int shiftbit; - unsigned char val, mask; - - p = tty->index % 4; - if (cmd == MOXA_SET_OP_MODE) { - if (get_user(opmode, (int __user *) argp)) - return -EFAULT; - if (opmode != RS232_MODE && - opmode != RS485_2WIRE_MODE && - opmode != RS422_MODE && - opmode != RS485_4WIRE_MODE) - return -EFAULT; - mask = ModeMask[p]; - shiftbit = p * 2; - val = inb(info->opmode_ioaddr); - val &= mask; - val |= (opmode << shiftbit); - outb(val, info->opmode_ioaddr); - } else { - shiftbit = p * 2; - opmode = inb(info->opmode_ioaddr) >> shiftbit; - opmode &= OP_MODE_MASK; - if (copy_to_user(argp, &opmode, sizeof(int))) - return -EFAULT; - } - return 0; - } - - if (cmd == MOXA_SET_SPECIAL_BAUD_RATE) { - int speed; - - if (get_user(speed, (int __user *)argp)) - return -EFAULT; - if (speed <= 0 || speed > info->max_baud) - return -EFAULT; - if (!info->tty || !info->tty->termios || !info->ioaddr) - return 0; - info->tty->termios->c_cflag &= ~(CBAUD | CBAUDEX); - for (i = 0; i < BAUD_TABLE_NO; i++) - if (speed == mxvar_baud_table[i]) - break; - if (i == BAUD_TABLE_NO) { - info->tty->termios->c_cflag |= B_SPEC; - } else if (speed != 0) - info->tty->termios->c_cflag |= mxvar_baud_table1[i]; - - info->speed = speed; - spin_lock_irqsave(&info->slock, flags); - mxser_change_speed(info, NULL); - spin_unlock_irqrestore(&info->slock, flags); - - return 0; - } else if (cmd == MOXA_GET_SPECIAL_BAUD_RATE) { - if (copy_to_user(argp, &info->speed, sizeof(int))) - return -EFAULT; - return 0; - } - - if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT && - test_bit(TTY_IO_ERROR, &tty->flags)) - return -EIO; - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (!arg) - mxser_send_break(info, HZ / 4); /* 1/4 second */ - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4); - return 0; - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); - case TIOCSSOFTCAR: - if (get_user(templ, (unsigned long __user *) argp)) - return -EFAULT; - arg = templ; - tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); - return 0; - case TIOCGSERIAL: - return mxser_get_serial_info(info, argp); - case TIOCSSERIAL: - return mxser_set_serial_info(info, argp); - case TIOCSERGETLSR: /* Get line status register */ - return mxser_get_lsr_info(info, argp); - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* note the counters on entry */ - spin_unlock_irqrestore(&info->slock, flags); - - wait_event_interruptible(info->delta_msr_wait, ({ - cprev = cnow; - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->slock, flags); - - ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)); - })); - break; - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->slock, flags); - p_cuser = argp; - if (put_user(cnow.frame, &p_cuser->frame)) - return -EFAULT; - if (put_user(cnow.brk, &p_cuser->brk)) - return -EFAULT; - if (put_user(cnow.overrun, &p_cuser->overrun)) - return -EFAULT; - if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - return -EFAULT; - if (put_user(cnow.parity, &p_cuser->parity)) - return -EFAULT; - if (put_user(cnow.rx, &p_cuser->rx)) - return -EFAULT; - if (put_user(cnow.tx, &p_cuser->tx)) - return -EFAULT; - put_user(cnow.cts, &p_cuser->cts); - put_user(cnow.dsr, &p_cuser->dsr); - put_user(cnow.rng, &p_cuser->rng); - put_user(cnow.dcd, &p_cuser->dcd); - return 0; - case MOXA_HighSpeedOn: - return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); - case MOXA_SDS_RSTICOUNTER: - info->mon_data.rxcnt = 0; - info->mon_data.txcnt = 0; - return 0; - case MOXA_ASPP_SETBAUD:{ - long baud; - if (get_user(baud, (long __user *)argp)) - return -EFAULT; - spin_lock_irqsave(&info->slock, flags); - mxser_set_baud(info, baud); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - case MOXA_ASPP_GETBAUD: - if (copy_to_user(argp, &info->realbaud, sizeof(long))) - return -EFAULT; - - return 0; - - case MOXA_ASPP_OQUEUE:{ - int len, lsr; - - len = mxser_chars_in_buffer(tty); - - lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT; - - len += (lsr ? 0 : 1); - - if (copy_to_user(argp, &len, sizeof(int))) - return -EFAULT; - - return 0; - } - case MOXA_ASPP_MON: { - int mcr, status; - - status = mxser_get_msr(info->ioaddr, 1, tty->index); - mxser_check_modem_status(info, status); - - mcr = inb(info->ioaddr + UART_MCR); - if (mcr & MOXA_MUST_MCR_XON_FLAG) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; - - if (mcr & MOXA_MUST_MCR_TX_XON) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; - - if (info->tty->hw_stopped) - info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; - else - info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - - if (copy_to_user(argp, &info->mon_data, - sizeof(struct mxser_mon))) - return -EFAULT; - - return 0; - } - case MOXA_ASPP_LSTATUS: { - if (copy_to_user(argp, &info->err_shadow, - sizeof(unsigned char))) - return -EFAULT; - - info->err_shadow = 0; - return 0; - } - case MOXA_SET_BAUD_METHOD: { - int method; - - if (get_user(method, (int __user *)argp)) - return -EFAULT; - mxser_set_baud_method[tty->index] = method; - if (copy_to_user(argp, &method, sizeof(int))) - return -EFAULT; - - return 0; - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void mxser_stoprx(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - info->ldisc_stop_rx = 1; - if (I_IXOFF(tty)) { - if (info->board->chip_flag) { - info->IER &= ~MOXA_MUST_RECV_ISR; - outb(info->IER, info->ioaddr + UART_IER); - } else { - info->x_char = STOP_CHAR(tty); - outb(0, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - } - - if (info->tty->termios->c_cflag & CRTSCTS) { - info->MCR &= ~UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - } -} - -/* - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - */ -static void mxser_throttle(struct tty_struct *tty) -{ - mxser_stoprx(tty); -} - -static void mxser_unthrottle(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - /* startrx */ - info->ldisc_stop_rx = 0; - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else { - if (info->board->chip_flag) { - info->IER |= MOXA_MUST_RECV_ISR; - outb(info->IER, info->ioaddr + UART_IER); - } else { - info->x_char = START_CHAR(tty); - outb(0, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - } - } - - if (info->tty->termios->c_cflag & CRTSCTS) { - info->MCR |= UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - } -} - -/* - * mxser_stop() and mxser_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - */ -static void mxser_stop(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_start(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt && info->xmit_buf) { - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - mxser_change_speed(info, old_termios); - spin_unlock_irqrestore(&info->slock, flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - mxser_start(tty); - } - - /* Handle sw stopped */ - if ((old_termios->c_iflag & IXON) && - !(tty->termios->c_iflag & IXON)) { - tty->stopped = 0; - - if (info->board->chip_flag) { - spin_lock_irqsave(&info->slock, flags); - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr); - spin_unlock_irqrestore(&info->slock, flags); - } - - mxser_start(tty); - } -} - -/* - * mxser_wait_until_sent() --- wait until the transmitter is empty - */ -static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct mxser_port *info = tty->driver_data; - unsigned long orig_jiffies, char_time; - int lsr; - - if (info->type == PORT_UNKNOWN) - return; - - if (info->xmit_fifo_size == 0) - return; /* Just in case.... */ - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; - if (timeout && timeout < char_time) - char_time = timeout; - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2 * info->timeout) - timeout = 2 * info->timeout; -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", - timeout, char_time); - printk("jiff=%lu...", jiffies); -#endif - while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...", lsr, jiffies); -#endif - schedule_timeout_interruptible(char_time); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - set_current_state(TASK_RUNNING); - -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -#endif -} - -/* - * This routine is called by tty_hangup() when a hangup is signaled. - */ -static void mxser_hangup(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - - mxser_flush_buffer(tty); - mxser_shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * mxser_rs_break() --- routine which turns the break handling on or off - */ -static void mxser_rs_break(struct tty_struct *tty, int break_state) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (break_state == -1) - outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, - info->ioaddr + UART_LCR); - else - outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_receive_chars(struct mxser_port *port, int *status) -{ - struct tty_struct *tty = port->tty; - unsigned char ch, gdl; - int ignored = 0; - int cnt = 0; - int recv_room; - int max = 256; - - recv_room = tty->receive_room; - if ((recv_room == 0) && (!port->ldisc_stop_rx)) - mxser_stoprx(tty); - - if (port->board->chip_flag != MOXA_OTHER_UART) { - - if (*status & UART_LSR_SPECIAL) - goto intr_old; - if (port->board->chip_flag == MOXA_MUST_MU860_HWID && - (*status & MOXA_MUST_LSR_RERR)) - goto intr_old; - if (*status & MOXA_MUST_LSR_RERR) - goto intr_old; - - gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); - - if (port->board->chip_flag == MOXA_MUST_MU150_HWID) - gdl &= MOXA_MUST_GDL_MASK; - if (gdl >= recv_room) { - if (!port->ldisc_stop_rx) - mxser_stoprx(tty); - } - while (gdl--) { - ch = inb(port->ioaddr + UART_RX); - tty_insert_flip_char(tty, ch, 0); - cnt++; - } - goto end_intr; - } -intr_old: - - do { - if (max-- < 0) - break; - - ch = inb(port->ioaddr + UART_RX); - if (port->board->chip_flag && (*status & UART_LSR_OE)) - outb(0x23, port->ioaddr + UART_FCR); - *status &= port->read_status_mask; - if (*status & port->ignore_status_mask) { - if (++ignored > 100) - break; - } else { - char flag = 0; - if (*status & UART_LSR_SPECIAL) { - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - port->icount.brk++; - - if (port->flags & ASYNC_SAK) - do_SAK(tty); - } else if (*status & UART_LSR_PE) { - flag = TTY_PARITY; - port->icount.parity++; - } else if (*status & UART_LSR_FE) { - flag = TTY_FRAME; - port->icount.frame++; - } else if (*status & UART_LSR_OE) { - flag = TTY_OVERRUN; - port->icount.overrun++; - } else - flag = TTY_BREAK; - } - tty_insert_flip_char(tty, ch, flag); - cnt++; - if (cnt >= recv_room) { - if (!port->ldisc_stop_rx) - mxser_stoprx(tty); - break; - } - - } - - if (port->board->chip_flag) - break; - - *status = inb(port->ioaddr + UART_LSR); - } while (*status & UART_LSR_DR); - -end_intr: - mxvar_log.rxcnt[port->tty->index] += cnt; - port->mon_data.rxcnt += cnt; - port->mon_data.up_rxcnt += cnt; - - /* - * We are called from an interrupt context with &port->slock - * being held. Drop it temporarily in order to prevent - * recursive locking. - */ - spin_unlock(&port->slock); - tty_flip_buffer_push(tty); - spin_lock(&port->slock); -} - -static void mxser_transmit_chars(struct mxser_port *port) -{ - int count, cnt; - - if (port->x_char) { - outb(port->x_char, port->ioaddr + UART_TX); - port->x_char = 0; - mxvar_log.txcnt[port->tty->index]++; - port->mon_data.txcnt++; - port->mon_data.up_txcnt++; - port->icount.tx++; - return; - } - - if (port->xmit_buf == 0) - return; - - if ((port->xmit_cnt <= 0) || port->tty->stopped || - (port->tty->hw_stopped && - (port->type != PORT_16550A) && - (!port->board->chip_flag))) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + UART_IER); - return; - } - - cnt = port->xmit_cnt; - count = port->xmit_fifo_size; - do { - outb(port->xmit_buf[port->xmit_tail++], - port->ioaddr + UART_TX); - port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); - if (--port->xmit_cnt <= 0) - break; - } while (--count > 0); - mxvar_log.txcnt[port->tty->index] += (cnt - port->xmit_cnt); - - port->mon_data.txcnt += (cnt - port->xmit_cnt); - port->mon_data.up_txcnt += (cnt - port->xmit_cnt); - port->icount.tx += (cnt - port->xmit_cnt); - - if (port->xmit_cnt < WAKEUP_CHARS) - tty_wakeup(port->tty); - - if (port->xmit_cnt <= 0) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + UART_IER); - } -} - -/* - * This is the serial driver's generic interrupt routine - */ -static irqreturn_t mxser_interrupt(int irq, void *dev_id) -{ - int status, iir, i; - struct mxser_board *brd = NULL; - struct mxser_port *port; - int max, irqbits, bits, msr; - unsigned int int_cnt, pass_counter = 0; - int handled = IRQ_NONE; - - for (i = 0; i < MXSER_BOARDS; i++) - if (dev_id == &mxser_boards[i]) { - brd = dev_id; - break; - } - - if (i == MXSER_BOARDS) - goto irq_stop; - if (brd == NULL) - goto irq_stop; - max = brd->info->nports; - while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { - irqbits = inb(brd->vector) & brd->vector_mask; - if (irqbits == brd->vector_mask) - break; - - handled = IRQ_HANDLED; - for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { - if (irqbits == brd->vector_mask) - break; - if (bits & irqbits) - continue; - port = &brd->ports[i]; - - int_cnt = 0; - spin_lock(&port->slock); - do { - iir = inb(port->ioaddr + UART_IIR); - if (iir & UART_IIR_NO_INT) - break; - iir &= MOXA_MUST_IIR_MASK; - if (!port->tty || - (port->flags & ASYNC_CLOSING) || - !(port->flags & - ASYNC_INITIALIZED)) { - status = inb(port->ioaddr + UART_LSR); - outb(0x27, port->ioaddr + UART_FCR); - inb(port->ioaddr + UART_MSR); - break; - } - - status = inb(port->ioaddr + UART_LSR); - - if (status & UART_LSR_PE) - port->err_shadow |= NPPI_NOTIFY_PARITY; - if (status & UART_LSR_FE) - port->err_shadow |= NPPI_NOTIFY_FRAMING; - if (status & UART_LSR_OE) - port->err_shadow |= - NPPI_NOTIFY_HW_OVERRUN; - if (status & UART_LSR_BI) - port->err_shadow |= NPPI_NOTIFY_BREAK; - - if (port->board->chip_flag) { - if (iir == MOXA_MUST_IIR_GDA || - iir == MOXA_MUST_IIR_RDA || - iir == MOXA_MUST_IIR_RTO || - iir == MOXA_MUST_IIR_LSR) - mxser_receive_chars(port, - &status); - - } else { - status &= port->read_status_mask; - if (status & UART_LSR_DR) - mxser_receive_chars(port, - &status); - } - msr = inb(port->ioaddr + UART_MSR); - if (msr & UART_MSR_ANY_DELTA) - mxser_check_modem_status(port, msr); - - if (port->board->chip_flag) { - if (iir == 0x02 && (status & - UART_LSR_THRE)) - mxser_transmit_chars(port); - } else { - if (status & UART_LSR_THRE) - mxser_transmit_chars(port); - } - } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); - spin_unlock(&port->slock); - } - } - -irq_stop: - return handled; -} - -static const struct tty_operations mxser_ops = { - .open = mxser_open, - .close = mxser_close, - .write = mxser_write, - .put_char = mxser_put_char, - .flush_chars = mxser_flush_chars, - .write_room = mxser_write_room, - .chars_in_buffer = mxser_chars_in_buffer, - .flush_buffer = mxser_flush_buffer, - .ioctl = mxser_ioctl, - .throttle = mxser_throttle, - .unthrottle = mxser_unthrottle, - .set_termios = mxser_set_termios, - .stop = mxser_stop, - .start = mxser_start, - .hangup = mxser_hangup, - .break_ctl = mxser_rs_break, - .wait_until_sent = mxser_wait_until_sent, - .tiocmget = mxser_tiocmget, - .tiocmset = mxser_tiocmset, -}; - -/* - * The MOXA Smartio/Industio serial driver boot-time initialization code! - */ - -static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev, - unsigned int irq) -{ - if (irq) - free_irq(brd->irq, brd); - if (pdev != NULL) { /* PCI */ -#ifdef CONFIG_PCI - pci_release_region(pdev, 2); - pci_release_region(pdev, 3); -#endif - } else { - release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - release_region(brd->vector, 1); - } -} - -static int __devinit mxser_initbrd(struct mxser_board *brd, - struct pci_dev *pdev) -{ - struct mxser_port *info; - unsigned int i; - int retval; - - printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud); - - for (i = 0; i < brd->info->nports; i++) { - info = &brd->ports[i]; - info->board = brd; - info->stop_rx = 0; - info->ldisc_stop_rx = 0; - - /* Enhance mode enabled here */ - if (brd->chip_flag != MOXA_OTHER_UART) - ENABLE_MOXA_MUST_ENCHANCE_MODE(info->ioaddr); - - info->flags = ASYNC_SHARE_IRQ; - info->type = brd->uart_type; - - process_txrx_fifo(info); - - info->custom_divisor = info->baud_base * 16; - info->close_delay = 5 * HZ / 10; - info->closing_wait = 30 * HZ; - info->normal_termios = mxvar_sdriver->init_termios; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->delta_msr_wait); - info->speed = 9600; - memset(&info->mon_data, 0, sizeof(struct mxser_mon)); - info->err_shadow = 0; - spin_lock_init(&info->slock); - - /* before set INT ISR, disable all int */ - outb(inb(info->ioaddr + UART_IER) & 0xf0, - info->ioaddr + UART_IER); - } - - retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", - brd); - if (retval) { - printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " - "conflict with another device.\n", - brd->info->name, brd->irq); - /* We hold resources, we need to release them. */ - mxser_release_res(brd, pdev, 0); - } - return retval; -} - -static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) -{ - int id, i, bits; - unsigned short regs[16], irq; - unsigned char scratch, scratch2; - - brd->chip_flag = MOXA_OTHER_UART; - - id = mxser_read_register(cap, regs); - switch (id) { - case C168_ASIC_ID: - brd->info = &mxser_cards[0]; - break; - case C104_ASIC_ID: - brd->info = &mxser_cards[1]; - break; - case CI104J_ASIC_ID: - brd->info = &mxser_cards[2]; - break; - case C102_ASIC_ID: - brd->info = &mxser_cards[5]; - break; - case CI132_ASIC_ID: - brd->info = &mxser_cards[6]; - break; - case CI134_ASIC_ID: - brd->info = &mxser_cards[7]; - break; - default: - return 0; - } - - irq = 0; - /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) - Flag-hack checks if configuration should be read as 2-port here. */ - if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - if (irq != (regs[9] & 0xFF00)) - return MXSER_ERR_IRQ_CONFLIT; - } else if (brd->info->nports == 4) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if (irq != regs[9]) - return MXSER_ERR_IRQ_CONFLIT; - } else if (brd->info->nports == 8) { - irq = regs[9] & 0xF000; - irq = irq | (irq >> 4); - irq = irq | (irq >> 8); - if ((irq != regs[9]) || (irq != regs[10])) - return MXSER_ERR_IRQ_CONFLIT; - } - - if (!irq) - return MXSER_ERR_IRQ; - brd->irq = ((int)(irq & 0xF000) >> 12); - for (i = 0; i < 8; i++) - brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; - if ((regs[12] & 0x80) == 0) - return MXSER_ERR_VECTOR; - brd->vector = (int)regs[11]; /* interrupt vector */ - if (id == 1) - brd->vector_mask = 0x00FF; - else - brd->vector_mask = 0x000F; - for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { - if (regs[12] & bits) { - brd->ports[i].baud_base = 921600; - brd->ports[i].max_baud = 921600; - } else { - brd->ports[i].baud_base = 115200; - brd->ports[i].max_baud = 115200; - } - } - scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); - outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); - outb(0, cap + UART_EFR); /* EFR is the same as FCR */ - outb(scratch2, cap + UART_LCR); - outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); - scratch = inb(cap + UART_IIR); - - if (scratch & 0xC0) - brd->uart_type = PORT_16550A; - else - brd->uart_type = PORT_16450; - if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, - "mxser(IO)")) - return MXSER_ERR_IOADDR; - if (!request_region(brd->vector, 1, "mxser(vector)")) { - release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - return MXSER_ERR_VECTOR; - } - return brd->info->nports; -} - -static int __devinit mxser_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ -#ifdef CONFIG_PCI - struct mxser_board *brd; - unsigned int i, j; - unsigned long ioaddress; - int retval = -EINVAL; - - for (i = 0; i < MXSER_BOARDS; i++) - if (mxser_boards[i].info == NULL) - break; - - if (i >= MXSER_BOARDS) { - printk(KERN_ERR "Too many Smartio/Industio family boards found " - "(maximum %d), board not configured\n", MXSER_BOARDS); - goto err; - } - - brd = &mxser_boards[i]; - brd->idx = i * MXSER_PORTS_PER_BOARD; - printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n", - mxser_cards[ent->driver_data].name, - pdev->bus->number, PCI_SLOT(pdev->devfn)); - - retval = pci_enable_device(pdev); - if (retval) { - printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n"); - goto err; - } - - /* io address */ - ioaddress = pci_resource_start(pdev, 2); - retval = pci_request_region(pdev, 2, "mxser(IO)"); - if (retval) - goto err; - - brd->info = &mxser_cards[ent->driver_data]; - for (i = 0; i < brd->info->nports; i++) - brd->ports[i].ioaddr = ioaddress + 8 * i; - - /* vector */ - ioaddress = pci_resource_start(pdev, 3); - retval = pci_request_region(pdev, 3, "mxser(vector)"); - if (retval) - goto err_relio; - brd->vector = ioaddress; - - /* irq */ - brd->irq = pdev->irq; - - brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); - brd->uart_type = PORT_16550A; - brd->vector_mask = 0; - - for (i = 0; i < brd->info->nports; i++) { - for (j = 0; j < UART_INFO_NUM; j++) { - if (Gpci_uart_info[j].type == brd->chip_flag) { - brd->ports[i].max_baud = - Gpci_uart_info[j].max_baud; - - /* exception....CP-102 */ - if (brd->info->flags & MXSER_HIGHBAUD) - brd->ports[i].max_baud = 921600; - break; - } - } - } - - if (brd->chip_flag == MOXA_MUST_MU860_HWID) { - for (i = 0; i < brd->info->nports; i++) { - if (i < 4) - brd->ports[i].opmode_ioaddr = ioaddress + 4; - else - brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; - } - outb(0, ioaddress + 4); /* default set to RS232 mode */ - outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ - } - - for (i = 0; i < brd->info->nports; i++) { - brd->vector_mask |= (1 << i); - brd->ports[i].baud_base = 921600; - } - - /* mxser_initbrd will hook ISR. */ - retval = mxser_initbrd(brd, pdev); - if (retval) - goto err_null; - - for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev); - - pci_set_drvdata(pdev, brd); - - return 0; -err_relio: - pci_release_region(pdev, 2); -err_null: - brd->info = NULL; -err: - return retval; -#else - return -ENODEV; -#endif -} - -static void __devexit mxser_remove(struct pci_dev *pdev) -{ - struct mxser_board *brd = pci_get_drvdata(pdev); - unsigned int i; - - for (i = 0; i < brd->info->nports; i++) - tty_unregister_device(mxvar_sdriver, brd->idx + i); - - mxser_release_res(brd, pdev, 1); - brd->info = NULL; -} - -static struct pci_driver mxser_driver = { - .name = "mxser", - .id_table = mxser_pcibrds, - .probe = mxser_probe, - .remove = __devexit_p(mxser_remove) -}; - -static int __init mxser_module_init(void) -{ - struct mxser_board *brd; - unsigned long cap; - unsigned int i, m, isaloop; - int retval, b; - - pr_debug("Loading module mxser ...\n"); - - mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); - if (!mxvar_sdriver) - return -ENOMEM; - - printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", - MXSER_VERSION); - - /* Initialize the tty_driver structure */ - mxvar_sdriver->owner = THIS_MODULE; - mxvar_sdriver->magic = TTY_DRIVER_MAGIC; - mxvar_sdriver->name = "ttyMI"; - mxvar_sdriver->major = ttymajor; - mxvar_sdriver->minor_start = 0; - mxvar_sdriver->num = MXSER_PORTS + 1; - mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; - mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; - mxvar_sdriver->init_termios = tty_std_termios; - mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; - mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(mxvar_sdriver, &mxser_ops); - - retval = tty_register_driver(mxvar_sdriver); - if (retval) { - printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " - "tty driver !\n"); - goto err_put; - } - - mxvar_diagflag = 0; - - m = 0; - /* Start finding ISA boards here */ - for (isaloop = 0; isaloop < 2; isaloop++) - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - if (!isaloop) - cap = mxserBoardCAP[b]; /* predefined */ - else - cap = ioaddr[b]; /* module param */ - - if (!cap) - continue; - - brd = &mxser_boards[m]; - retval = mxser_get_ISA_conf(cap, brd); - - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board " - "(CAP=0x%x)\n", - brd->info->name, ioaddr[b]); - - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt " - "number, board not " - "configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt " - "number, board not " - "configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt " - "vector, board not " - "configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address, " - "board not configured\n"); - - brd->info = NULL; - continue; - } - - /* mxser_initbrd will hook ISR. */ - if (mxser_initbrd(brd, NULL) < 0) { - brd->info = NULL; - continue; - } - - brd->idx = m * MXSER_PORTS_PER_BOARD; - for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, - NULL); - - m++; - } - - retval = pci_register_driver(&mxser_driver); - if (retval) { - printk(KERN_ERR "Can't register pci driver\n"); - if (!m) { - retval = -ENODEV; - goto err_unr; - } /* else: we have some ISA cards under control */ - } - - pr_debug("Done.\n"); - - return 0; -err_unr: - tty_unregister_driver(mxvar_sdriver); -err_put: - put_tty_driver(mxvar_sdriver); - return retval; -} - -static void __exit mxser_module_exit(void) -{ - unsigned int i, j; - - pr_debug("Unloading module mxser ...\n"); - - pci_unregister_driver(&mxser_driver); - - for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ - if (mxser_boards[i].info != NULL) - for (j = 0; j < mxser_boards[i].info->nports; j++) - tty_unregister_device(mxvar_sdriver, - mxser_boards[i].idx + j); - tty_unregister_driver(mxvar_sdriver); - put_tty_driver(mxvar_sdriver); - - for (i = 0; i < MXSER_BOARDS; i++) - if (mxser_boards[i].info != NULL) - mxser_release_res(&mxser_boards[i], NULL, 1); - - pr_debug("Done.\n"); -} - -module_init(mxser_module_init); -module_exit(mxser_module_exit); |