diff options
Diffstat (limited to 'drivers/char/ser_a2232fw.ax')
| -rw-r--r-- | drivers/char/ser_a2232fw.ax | 529 |
1 files changed, 0 insertions, 529 deletions
diff --git a/drivers/char/ser_a2232fw.ax b/drivers/char/ser_a2232fw.ax deleted file mode 100644 index 736438032768..000000000000 --- a/drivers/char/ser_a2232fw.ax +++ /dev/null @@ -1,529 +0,0 @@ -;.lib "axm" -; -;begin -;title "A2232 serial board driver" -; -;set modules "2232" -;set executable "2232.bin" -; -;;;;set nolink -; -;set temporary directory "t:" -; -;set assembly options "-m6502 -l60:t:list" -;set link options "bin"; loadadr" -;;;bin2c 2232.bin msc6502.h msc6502code -;end -; -; -; ### Commodore A2232 serial board driver for NetBSD by JM v1.3 ### -; -; - Created 950501 by JM - -; -; -; Serial board driver software. -; -; -% Copyright (c) 1995 Jukka Marin <jmarin@jmp.fi>. -% All rights reserved. -% -% Redistribution and use in source and binary forms, with or without -% modification, are permitted provided that the following conditions -% are met: -% 1. Redistributions of source code must retain the above copyright -% notice, and the entire permission notice in its entirety, -% including the disclaimer of warranties. -% 2. Redistributions in binary form must reproduce the above copyright -% notice, this list of conditions and the following disclaimer in the -% documentation and/or other materials provided with the distribution. -% 3. The name of the author may not be used to endorse or promote -% products derived from this software without specific prior -% written permission. -% -% ALTERNATIVELY, this product may be distributed under the terms of -% the GNU General Public License, in which case the provisions of the -% GPL are required INSTEAD OF the above restrictions. (This clause is -% necessary due to a potential bad interaction between the GPL and -% the restrictions contained in a BSD-style copyright.) -% -% THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED -% WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -% OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -% DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, -% INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -% (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -% SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -% HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -% STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED -% OF THE POSSIBILITY OF SUCH DAMAGE. -; -; -; Bugs: -; -; - Can't send a break yet -; -; -; -; Edited: -; -; - 950501 by JM -> v0.1 - Created this file. -; - 951029 by JM -> v1.3 - Carrier Detect events now queued in a separate -; queue. -; -; - - -CODE equ $3800 ; start address for program code - - -CTL_CHAR equ $00 ; byte in ibuf is a character -CTL_EVENT equ $01 ; byte in ibuf is an event - -EVENT_BREAK equ $01 -EVENT_CDON equ $02 -EVENT_CDOFF equ $03 -EVENT_SYNC equ $04 - -XON equ $11 -XOFF equ $13 - - -VARBASE macro *starting_address ; was VARINIT -_varbase set \1 - endm - -VARDEF macro *name space_needs -\1 equ _varbase -_varbase set _varbase+\2 - endm - - -stz macro * address - db $64,\1 - endm - -stzax macro * address - db $9e,<\1,>\1 - endm - - -biti macro * immediate value - db $89,\1 - endm - -smb0 macro * address - db $87,\1 - endm -smb1 macro * address - db $97,\1 - endm -smb2 macro * address - db $a7,\1 - endm -smb3 macro * address - db $b7,\1 - endm -smb4 macro * address - db $c7,\1 - endm -smb5 macro * address - db $d7,\1 - endm -smb6 macro * address - db $e7,\1 - endm -smb7 macro * address - db $f7,\1 - endm - - - -;-----------------------------------------------------------------------; -; ; -; stuff common for all ports, non-critical (run once / loop) ; -; ; -DO_SLOW macro * port_number ; - .local ; ; - lda CIA+C_PA ; check all CD inputs ; - cmp CommonCDo ; changed from previous accptd? ; - beq =over ; nope, do nothing else here ; - ; ; - cmp CommonCDb ; bouncing? ; - beq =nobounce ; nope -> ; - ; ; - sta CommonCDb ; save current state ; - lda #64 ; reinitialize counter ; - sta CommonCDc ; ; - jmp =over ; skip CD save ; - ; ; -=nobounce dec CommonCDc ; no, decrement bounce counter ; - bpl =over ; not done yet, so skip CD save ; - ; ; -=saveCD ldx CDHead ; get write index ; - sta cdbuf,x ; save status in buffer ; - inx ; ; - cpx CDTail ; buffer full? ; - .if ne ; no: preserve status: ; - stx CDHead ; update index in RAM ; - sta CommonCDo ; save state for the next check ; - .end ; ; -=over .end local ; - endm ; - ; -;-----------------------------------------------------------------------; - - -; port specific stuff (no data transfer) - -DO_PORT macro * port_number - .local ; ; - lda SetUp\1 ; reconfiguration request? ; - .if ne ; yes: ; - lda SoftFlow\1 ; get XON/XOFF flag ; - sta XonOff\1 ; save it ; - lda Param\1 ; get parameter ; - ora #%00010000 ; use baud generator for Rx ; - sta ACIA\1+A_CTRL ; store in control register ; - stz OutDisable\1 ; enable transmit output ; - stz SetUp\1 ; no reconfiguration no more ; - .end ; ; - ; ; - lda InHead\1 ; get write index ; - sbc InTail\1 ; buffer full soon? ; - cmp #200 ; 200 chars or more in buffer? ; - lda Command\1 ; get Command reg value ; - and #%11110011 ; turn RTS OFF by default ; - .if cc ; still room in buffer: ; - ora #%00001000 ; turn RTS ON ; - .end ; ; - sta ACIA\1+A_CMD ; set/clear RTS ; - ; ; - lda OutFlush\1 ; request to flush output buffer; - .if ne ; yessh! ; - lda OutHead\1 ; get head ; - sta OutTail\1 ; save as tail ; - stz OutDisable\1 ; enable transmit output ; - stz OutFlush\1 ; clear request ; - .end - .end local - endm - - -DO_DATA macro * port number - .local - lda ACIA\1+A_SR ; read ACIA status register ; - biti [1<<3] ; something received? ; - .if ne ; yes: ; - biti [1<<1] ; framing error? ; - .if ne ; yes: ; - lda ACIA\1+A_DATA ; read received character ; - bne =SEND ; not break -> ignore it ; - ldx InHead\1 ; get write pointer ; - lda #CTL_EVENT ; get type of byte ; - sta ictl\1,x ; save it in InCtl buffer ; - lda #EVENT_BREAK ; event code ; - sta ibuf\1,x ; save it as well ; - inx ; ; - cpx InTail\1 ; still room in buffer? ; - .if ne ; absolutely: ; - stx InHead\1 ; update index in memory ; - .end ; ; - jmp =SEND ; go check if anything to send ; - .end ; ; - ; normal char received: ; - ldx InHead\1 ; get write index ; - lda ACIA\1+A_DATA ; read received character ; - sta ibuf\1,x ; save char in buffer ; - stzax ictl\1 ; set type to CTL_CHAR ; - inx ; ; - cpx InTail\1 ; buffer full? ; - .if ne ; no: preserve character: ; - stx InHead\1 ; update index in RAM ; - .end ; ; - and #$7f ; mask off parity if any ; - cmp #XOFF ; XOFF from remote host? ; - .if eq ; yes: ; - lda XonOff\1 ; if XON/XOFF handshaking.. ; - sta OutDisable\1 ; ..disable transmitter ; - .end ; ; - .end ; ; - ; ; - ; BUFFER FULL CHECK WAS HERE ; - ; ; -=SEND lda ACIA\1+A_SR ; transmit register empty? ; - and #[1<<4] ; ; - .if ne ; yes: ; - ldx OutCtrl\1 ; sending out XON/XOFF? ; - .if ne ; yes: ; - lda CIA+C_PB ; check CTS signal ; - and #[1<<\1] ; (for this port only) ; - bne =DONE ; not allowed to send -> done ; - stx ACIA\1+A_DATA ; transmit control char ; - stz OutCtrl\1 ; clear flag ; - jmp =DONE ; and we're done ; - .end ; ; - ; ; - ldx OutTail\1 ; anything to transmit? ; - cpx OutHead\1 ; ; - .if ne ; yes: ; - lda OutDisable\1 ; allowed to transmit? ; - .if eq ; yes: ; - lda CIA+C_PB ; check CTS signal ; - and #[1<<\1] ; (for this port only) ; - bne =DONE ; not allowed to send -> done ; - lda obuf\1,x ; get a char from buffer ; - sta ACIA\1+A_DATA ; send it away ; - inc OutTail\1 ; update read index ; - .end ; ; - .end ; ; - .end ; ; -=DONE .end local - endm - - - -PORTVAR macro * port number - VARDEF InHead\1 1 - VARDEF InTail\1 1 - VARDEF OutDisable\1 1 - VARDEF OutHead\1 1 - VARDEF OutTail\1 1 - VARDEF OutCtrl\1 1 - VARDEF OutFlush\1 1 - VARDEF SetUp\1 1 - VARDEF Param\1 1 - VARDEF Command\1 1 - VARDEF SoftFlow\1 1 - ; private: - VARDEF XonOff\1 1 - endm - - - VARBASE 0 ; start variables at address $0000 - PORTVAR 0 ; define variables for port 0 - PORTVAR 1 ; define variables for port 1 - PORTVAR 2 ; define variables for port 2 - PORTVAR 3 ; define variables for port 3 - PORTVAR 4 ; define variables for port 4 - PORTVAR 5 ; define variables for port 5 - PORTVAR 6 ; define variables for port 6 - - - - VARDEF Crystal 1 ; 0 = unknown, 1 = normal, 2 = turbo - VARDEF Pad_a 1 - VARDEF TimerH 1 - VARDEF TimerL 1 - VARDEF CDHead 1 - VARDEF CDTail 1 - VARDEF CDStatus 1 - VARDEF Pad_b 1 - - VARDEF CommonCDo 1 ; for carrier detect optimization - VARDEF CommonCDc 1 ; for carrier detect debouncing - VARDEF CommonCDb 1 ; for carrier detect debouncing - - - VARBASE $0200 - VARDEF obuf0 256 ; output data (characters only) - VARDEF obuf1 256 - VARDEF obuf2 256 - VARDEF obuf3 256 - VARDEF obuf4 256 - VARDEF obuf5 256 - VARDEF obuf6 256 - - VARDEF ibuf0 256 ; input data (characters, events etc - see ictl) - VARDEF ibuf1 256 - VARDEF ibuf2 256 - VARDEF ibuf3 256 - VARDEF ibuf4 256 - VARDEF ibuf5 256 - VARDEF ibuf6 256 - - VARDEF ictl0 256 ; input control information (type of data in ibuf) - VARDEF ictl1 256 - VARDEF ictl2 256 - VARDEF ictl3 256 - VARDEF ictl4 256 - VARDEF ictl5 256 - VARDEF ictl6 256 - - VARDEF cdbuf 256 ; CD event queue - - -ACIA0 equ $4400 -ACIA1 equ $4c00 -ACIA2 equ $5400 -ACIA3 equ $5c00 -ACIA4 equ $6400 -ACIA5 equ $6c00 -ACIA6 equ $7400 - -A_DATA equ $00 -A_SR equ $02 -A_CMD equ $04 -A_CTRL equ $06 -; 00 write transmit data read received data -; 02 reset ACIA read status register -; 04 write command register read command register -; 06 write control register read control register - -CIA equ $7c00 ; 8520 CIA -C_PA equ $00 ; port A data register -C_PB equ $02 ; port B data register -C_DDRA equ $04 ; data direction register for port A -C_DDRB equ $06 ; data direction register for port B -C_TAL equ $08 ; timer A -C_TAH equ $0a -C_TBL equ $0c ; timer B -C_TBH equ $0e -C_TODL equ $10 ; TOD LSB -C_TODM equ $12 ; TOD middle byte -C_TODH equ $14 ; TOD MSB -C_DATA equ $18 ; serial data register -C_INTCTRL equ $1a ; interrupt control register -C_CTRLA equ $1c ; control register A -C_CTRLB equ $1e ; control register B - - - - - - section main,code,CODE-2 - - db >CODE,<CODE - -;-----------------------------------------------------------------------; -; here's the initialization code: ; -; ; -R_RESET ldx #$ff ; - txs ; initialize stack pointer ; - cld ; in case a 6502 is used... ; - ldx #0 ; ; - lda #0 ; ; - ldy #Crystal ; this many bytes to clear ; -clr_loop sta 0,x ; clear zero page variables ; - inx ; ; - dey ; ; - bne clr_loop ; ; - ; ; - stz CommonCDo ; force CD test at boot ; - stz CommonCDb ; ; - stz CDHead ; clear queue ; - stz CDTail ; ; - ; ; - lda #0 ; ; - sta Pad_a ; ; - lda #170 ; test cmp ; - cmp #100 ; ; - .if cs ; ; - inc Pad_a ; C was set ; - .end ; ; - ; -;-----------------------------------------------------------------------; -; Speed check ; -;-----------------------------------------------------------------------; - ; - lda Crystal ; speed already set? ; - beq DoSpeedy ; ; - jmp LOOP ; yes, skip speed test ; - ; ; -DoSpeedy lda #%10011000 ; 8N1, 1200/2400 bps ; - sta ACIA0+A_CTRL ; ; - lda #%00001011 ; enable DTR ; - sta ACIA0+A_CMD ; ; - lda ACIA0+A_SR ; read status register ; - ; ; - lda #%10000000 ; disable all ints (unnecessary); - sta CIA+C_INTCTRL ; ; - lda #255 ; program the timer ; - sta CIA+C_TAL ; ; - sta CIA+C_TAH ; ; - ; ; - ldx #0 ; ; - stx ACIA0+A_DATA ; transmit a zero ; - nop ; ; - nop ; ; - lda ACIA0+A_SR ; read status ; - nop ; ; - nop ; ; - stx ACIA0+A_DATA ; transmit a zero ; -Speedy1 lda ACIA0+A_SR ; read status ; - and #[1<<4] ; transmit data reg empty? ; - beq Speedy1 ; not yet, wait more ; - ; ; - lda #%00010001 ; load & start the timer ; - stx ACIA0+A_DATA ; transmit one more zero ; - sta CIA+C_CTRLA ; ; -Speedy2 lda ACIA0+A_SR ; read status ; - and #[1<<4] ; transmit data reg empty? ; - beq Speedy2 ; not yet, wait more ; - stx CIA+C_CTRLA ; stop the timer ; - ; ; - lda CIA+C_TAL ; copy timer value for 68k ; - sta TimerL ; ; - lda CIA+C_TAH ; ; - sta TimerH ; ; - cmp #$d0 ; turbo or normal? ; - .if cs ; ; - lda #2 ; turbo! :-) ; - .else ; ; - lda #1 ; normal :-( ; - .end ; ; - sta Crystal ; ; - lda #0 ; ; - sta ACIA0+A_SR ; ; - sta ACIA0+A_CTRL ; reset UART ; - sta ACIA0+A_CMD ; ; - ; - jmp LOOP ; - ; -; ; -;-----------------------------------------------------------------------; -; ; -; The Real Thing: ; -; ; -LOOP DO_SLOW ; do non-critical things ; - jsr do_input ; check for received data - DO_PORT 0 - jsr do_input - DO_PORT 1 - jsr do_input - DO_PORT 2 - jsr do_input - DO_PORT 3 - jsr do_input - DO_PORT 4 - jsr do_input - DO_PORT 5 - jsr do_input - DO_PORT 6 - jsr do_input - jmp LOOP - - -do_input DO_DATA 0 - DO_DATA 1 - DO_DATA 2 - DO_DATA 3 - DO_DATA 4 - DO_DATA 5 - DO_DATA 6 - rts - - -;-----------------------------------------------------------------------; - section vectors,data,$3ffa - dw $d0d0 - dw R_RESET - dw $c0ce -;-----------------------------------------------------------------------; - - - - end - - - |