diff options
Diffstat (limited to 'drivers/char/virtio_console.c')
-rw-r--r-- | drivers/char/virtio_console.c | 143 |
1 files changed, 65 insertions, 78 deletions
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 8c0017d48571..34548d3b4d13 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -75,7 +75,7 @@ struct ports_driver_data { /* All the console devices handled by this driver */ struct list_head consoles; }; -static struct ports_driver_data pdrvdata; +static struct ports_driver_data pdrvdata = { .next_vtermno = 1}; static DEFINE_SPINLOCK(pdrvdata_lock); static DECLARE_COMPLETION(early_console_added); @@ -422,7 +422,7 @@ static void reclaim_dma_bufs(void) } } -static struct port_buffer *alloc_buf(struct virtqueue *vq, size_t buf_size, +static struct port_buffer *alloc_buf(struct virtio_device *vdev, size_t buf_size, int pages) { struct port_buffer *buf; @@ -445,7 +445,7 @@ static struct port_buffer *alloc_buf(struct virtqueue *vq, size_t buf_size, return buf; } - if (is_rproc_serial(vq->vdev)) { + if (is_rproc_serial(vdev)) { /* * Allocate DMA memory from ancestor. When a virtio * device is created by remoteproc, the DMA memory is @@ -455,9 +455,9 @@ static struct port_buffer *alloc_buf(struct virtqueue *vq, size_t buf_size, * DMA_MEMORY_INCLUDES_CHILDREN had been supported * in dma-coherent.c */ - if (!vq->vdev->dev.parent || !vq->vdev->dev.parent->parent) + if (!vdev->dev.parent || !vdev->dev.parent->parent) goto free_buf; - buf->dev = vq->vdev->dev.parent->parent; + buf->dev = vdev->dev.parent->parent; /* Increase device refcnt to avoid freeing it */ get_device(buf->dev); @@ -841,7 +841,7 @@ static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, count = min((size_t)(32 * 1024), count); - buf = alloc_buf(port->out_vq, count, 0); + buf = alloc_buf(port->portdev->vdev, count, 0); if (!buf) return -ENOMEM; @@ -960,7 +960,7 @@ static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe, if (ret < 0) goto error_out; - buf = alloc_buf(port->out_vq, 0, pipe->nrbufs); + buf = alloc_buf(port->portdev->vdev, 0, pipe->nrbufs); if (!buf) { ret = -ENOMEM; goto error_out; @@ -1369,24 +1369,24 @@ static void set_console_size(struct port *port, u16 rows, u16 cols) port->cons.ws.ws_col = cols; } -static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock) +static int fill_queue(struct virtqueue *vq, spinlock_t *lock) { struct port_buffer *buf; - unsigned int nr_added_bufs; + int nr_added_bufs; int ret; nr_added_bufs = 0; do { - buf = alloc_buf(vq, PAGE_SIZE, 0); + buf = alloc_buf(vq->vdev, PAGE_SIZE, 0); if (!buf) - break; + return -ENOMEM; spin_lock_irq(lock); ret = add_inbuf(vq, buf); if (ret < 0) { spin_unlock_irq(lock); free_buf(buf, true); - break; + return ret; } nr_added_bufs++; spin_unlock_irq(lock); @@ -1406,7 +1406,6 @@ static int add_port(struct ports_device *portdev, u32 id) char debugfs_name[16]; struct port *port; dev_t devt; - unsigned int nr_added_bufs; int err; port = kmalloc(sizeof(*port), GFP_KERNEL); @@ -1425,6 +1424,7 @@ static int add_port(struct ports_device *portdev, u32 id) port->async_queue = NULL; port->cons.ws.ws_row = port->cons.ws.ws_col = 0; + port->cons.vtermno = 0; port->host_connected = port->guest_connected = false; port->stats = (struct port_stats) { 0 }; @@ -1464,11 +1464,13 @@ static int add_port(struct ports_device *portdev, u32 id) spin_lock_init(&port->outvq_lock); init_waitqueue_head(&port->waitqueue); - /* Fill the in_vq with buffers so the host can send us data. */ - nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock); - if (!nr_added_bufs) { + /* We can safely ignore ENOSPC because it means + * the queue already has buffers. Buffers are removed + * only by virtcons_remove(), not by unplug_port() + */ + err = fill_queue(port->in_vq, &port->inbuf_lock); + if (err < 0 && err != -ENOSPC) { dev_err(port->dev, "Error allocating inbufs\n"); - err = -ENOMEM; goto free_device; } @@ -1991,19 +1993,40 @@ static void remove_vqs(struct ports_device *portdev) kfree(portdev->out_vqs); } -static void remove_controlq_data(struct ports_device *portdev) +static void virtcons_remove(struct virtio_device *vdev) { - struct port_buffer *buf; - unsigned int len; + struct ports_device *portdev; + struct port *port, *port2; - if (!use_multiport(portdev)) - return; + portdev = vdev->priv; - while ((buf = virtqueue_get_buf(portdev->c_ivq, &len))) - free_buf(buf, true); + spin_lock_irq(&pdrvdata_lock); + list_del(&portdev->list); + spin_unlock_irq(&pdrvdata_lock); - while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq))) - free_buf(buf, true); + /* Disable interrupts for vqs */ + vdev->config->reset(vdev); + /* Finish up work that's lined up */ + if (use_multiport(portdev)) + cancel_work_sync(&portdev->control_work); + else + cancel_work_sync(&portdev->config_work); + + list_for_each_entry_safe(port, port2, &portdev->ports, list) + unplug_port(port); + + unregister_chrdev(portdev->chr_major, "virtio-portsdev"); + + /* + * When yanking out a device, we immediately lose the + * (device-side) queues. So there's no point in keeping the + * guest side around till we drop our final reference. This + * also means that any ports which are in an open state will + * have to just stop using the port, as the vqs are going + * away. + */ + remove_vqs(portdev); + kfree(portdev); } /* @@ -2072,6 +2095,7 @@ static int virtcons_probe(struct virtio_device *vdev) spin_lock_init(&portdev->ports_lock); INIT_LIST_HEAD(&portdev->ports); + INIT_LIST_HEAD(&portdev->list); virtio_device_ready(portdev->vdev); @@ -2079,18 +2103,22 @@ static int virtcons_probe(struct virtio_device *vdev) INIT_WORK(&portdev->control_work, &control_work_handler); if (multiport) { - unsigned int nr_added_bufs; - spin_lock_init(&portdev->c_ivq_lock); spin_lock_init(&portdev->c_ovq_lock); - nr_added_bufs = fill_queue(portdev->c_ivq, - &portdev->c_ivq_lock); - if (!nr_added_bufs) { + err = fill_queue(portdev->c_ivq, &portdev->c_ivq_lock); + if (err < 0) { dev_err(&vdev->dev, "Error allocating buffers for control queue\n"); - err = -ENOMEM; - goto free_vqs; + /* + * The host might want to notify mgmt sw about device + * add failure. + */ + __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID, + VIRTIO_CONSOLE_DEVICE_READY, 0); + /* Device was functional: we need full cleanup. */ + virtcons_remove(vdev); + return err; } } else { /* @@ -2121,11 +2149,6 @@ static int virtcons_probe(struct virtio_device *vdev) return 0; -free_vqs: - /* The host might want to notify mgmt sw about device add failure */ - __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID, - VIRTIO_CONSOLE_DEVICE_READY, 0); - remove_vqs(portdev); free_chrdev: unregister_chrdev(portdev->chr_major, "virtio-portsdev"); free: @@ -2134,43 +2157,6 @@ fail: return err; } -static void virtcons_remove(struct virtio_device *vdev) -{ - struct ports_device *portdev; - struct port *port, *port2; - - portdev = vdev->priv; - - spin_lock_irq(&pdrvdata_lock); - list_del(&portdev->list); - spin_unlock_irq(&pdrvdata_lock); - - /* Disable interrupts for vqs */ - vdev->config->reset(vdev); - /* Finish up work that's lined up */ - if (use_multiport(portdev)) - cancel_work_sync(&portdev->control_work); - else - cancel_work_sync(&portdev->config_work); - - list_for_each_entry_safe(port, port2, &portdev->ports, list) - unplug_port(port); - - unregister_chrdev(portdev->chr_major, "virtio-portsdev"); - - /* - * When yanking out a device, we immediately lose the - * (device-side) queues. So there's no point in keeping the - * guest side around till we drop our final reference. This - * also means that any ports which are in an open state will - * have to just stop using the port, as the vqs are going - * away. - */ - remove_controlq_data(portdev); - remove_vqs(portdev); - kfree(portdev); -} - static struct virtio_device_id id_table[] = { { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID }, { 0 }, @@ -2201,15 +2187,16 @@ static int virtcons_freeze(struct virtio_device *vdev) vdev->config->reset(vdev); - virtqueue_disable_cb(portdev->c_ivq); + if (use_multiport(portdev)) + virtqueue_disable_cb(portdev->c_ivq); cancel_work_sync(&portdev->control_work); cancel_work_sync(&portdev->config_work); /* * Once more: if control_work_handler() was running, it would * enable the cb as the last step. */ - virtqueue_disable_cb(portdev->c_ivq); - remove_controlq_data(portdev); + if (use_multiport(portdev)) + virtqueue_disable_cb(portdev->c_ivq); list_for_each_entry(port, &portdev->ports, list) { virtqueue_disable_cb(port->in_vq); |