summaryrefslogtreecommitdiff
path: root/drivers/dma/ste_dma40_ll.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma/ste_dma40_ll.c')
-rw-r--r--drivers/dma/ste_dma40_ll.c189
1 files changed, 98 insertions, 91 deletions
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index 7180e0d41722..27b818dee7c7 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -10,6 +10,18 @@
#include "ste_dma40_ll.h"
+u8 d40_width_to_bits(enum dma_slave_buswidth width)
+{
+ if (width == DMA_SLAVE_BUSWIDTH_1_BYTE)
+ return STEDMA40_ESIZE_8_BIT;
+ else if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
+ return STEDMA40_ESIZE_16_BIT;
+ else if (width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+ return STEDMA40_ESIZE_64_BIT;
+ else
+ return STEDMA40_ESIZE_32_BIT;
+}
+
/* Sets up proper LCSP1 and LCSP3 register for a logical channel */
void d40_log_cfg(struct stedma40_chan_cfg *cfg,
u32 *lcsp1, u32 *lcsp3)
@@ -18,106 +30,100 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
u32 l1 = 0; /* src */
/* src is mem? -> increase address pos */
- if (cfg->dir == STEDMA40_MEM_TO_PERIPH ||
- cfg->dir == STEDMA40_MEM_TO_MEM)
- l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS;
+ if (cfg->dir == DMA_MEM_TO_DEV ||
+ cfg->dir == DMA_MEM_TO_MEM)
+ l1 |= BIT(D40_MEM_LCSP1_SCFG_INCR_POS);
/* dst is mem? -> increase address pos */
- if (cfg->dir == STEDMA40_PERIPH_TO_MEM ||
- cfg->dir == STEDMA40_MEM_TO_MEM)
- l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS;
+ if (cfg->dir == DMA_DEV_TO_MEM ||
+ cfg->dir == DMA_MEM_TO_MEM)
+ l3 |= BIT(D40_MEM_LCSP3_DCFG_INCR_POS);
/* src is hw? -> master port 1 */
- if (cfg->dir == STEDMA40_PERIPH_TO_MEM ||
- cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
- l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS;
+ if (cfg->dir == DMA_DEV_TO_MEM ||
+ cfg->dir == DMA_DEV_TO_DEV)
+ l1 |= BIT(D40_MEM_LCSP1_SCFG_MST_POS);
/* dst is hw? -> master port 1 */
- if (cfg->dir == STEDMA40_MEM_TO_PERIPH ||
- cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
- l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS;
+ if (cfg->dir == DMA_MEM_TO_DEV ||
+ cfg->dir == DMA_DEV_TO_DEV)
+ l3 |= BIT(D40_MEM_LCSP3_DCFG_MST_POS);
- l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS;
+ l3 |= BIT(D40_MEM_LCSP3_DCFG_EIM_POS);
l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS;
- l3 |= cfg->dst_info.data_width << D40_MEM_LCSP3_DCFG_ESIZE_POS;
+ l3 |= d40_width_to_bits(cfg->dst_info.data_width)
+ << D40_MEM_LCSP3_DCFG_ESIZE_POS;
- l1 |= 1 << D40_MEM_LCSP1_SCFG_EIM_POS;
+ l1 |= BIT(D40_MEM_LCSP1_SCFG_EIM_POS);
l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS;
- l1 |= cfg->src_info.data_width << D40_MEM_LCSP1_SCFG_ESIZE_POS;
+ l1 |= d40_width_to_bits(cfg->src_info.data_width)
+ << D40_MEM_LCSP1_SCFG_ESIZE_POS;
*lcsp1 = l1;
*lcsp3 = l3;
}
-/* Sets up SRC and DST CFG register for both logical and physical channels */
-void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
- u32 *src_cfg, u32 *dst_cfg, bool is_log)
+void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
{
u32 src = 0;
u32 dst = 0;
- if (!is_log) {
- /* Physical channel */
- if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
- (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
- /* Set master port to 1 */
- src |= 1 << D40_SREG_CFG_MST_POS;
- src |= D40_TYPE_TO_EVENT(cfg->src_dev_type);
-
- if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
- src |= 1 << D40_SREG_CFG_PHY_TM_POS;
- else
- src |= 3 << D40_SREG_CFG_PHY_TM_POS;
- }
- if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
- (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
- /* Set master port to 1 */
- dst |= 1 << D40_SREG_CFG_MST_POS;
- dst |= D40_TYPE_TO_EVENT(cfg->dst_dev_type);
-
- if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
- dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
- else
- dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
- }
- /* Interrupt on end of transfer for destination */
- dst |= 1 << D40_SREG_CFG_TIM_POS;
-
- /* Generate interrupt on error */
- src |= 1 << D40_SREG_CFG_EIM_POS;
- dst |= 1 << D40_SREG_CFG_EIM_POS;
-
- /* PSIZE */
- if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
- src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
- src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
- }
- if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
- dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
- dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
- }
-
- /* Element size */
- src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
- dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
-
- /* Set the priority bit to high for the physical channel */
- if (cfg->high_priority) {
- src |= 1 << D40_SREG_CFG_PRI_POS;
- dst |= 1 << D40_SREG_CFG_PRI_POS;
- }
-
- } else {
- /* Logical channel */
- dst |= 1 << D40_SREG_CFG_LOG_GIM_POS;
- src |= 1 << D40_SREG_CFG_LOG_GIM_POS;
+ if ((cfg->dir == DMA_DEV_TO_MEM) ||
+ (cfg->dir == DMA_DEV_TO_DEV)) {
+ /* Set master port to 1 */
+ src |= BIT(D40_SREG_CFG_MST_POS);
+ src |= D40_TYPE_TO_EVENT(cfg->dev_type);
+
+ if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
+ src |= BIT(D40_SREG_CFG_PHY_TM_POS);
+ else
+ src |= 3 << D40_SREG_CFG_PHY_TM_POS;
+ }
+ if ((cfg->dir == DMA_MEM_TO_DEV) ||
+ (cfg->dir == DMA_DEV_TO_DEV)) {
+ /* Set master port to 1 */
+ dst |= BIT(D40_SREG_CFG_MST_POS);
+ dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
+
+ if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
+ dst |= BIT(D40_SREG_CFG_PHY_TM_POS);
+ else
+ dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
+ }
+ /* Interrupt on end of transfer for destination */
+ dst |= BIT(D40_SREG_CFG_TIM_POS);
+
+ /* Generate interrupt on error */
+ src |= BIT(D40_SREG_CFG_EIM_POS);
+ dst |= BIT(D40_SREG_CFG_EIM_POS);
+
+ /* PSIZE */
+ if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
+ src |= BIT(D40_SREG_CFG_PHY_PEN_POS);
+ src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
+ }
+ if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
+ dst |= BIT(D40_SREG_CFG_PHY_PEN_POS);
+ dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
+ }
+
+ /* Element size */
+ src |= d40_width_to_bits(cfg->src_info.data_width)
+ << D40_SREG_CFG_ESIZE_POS;
+ dst |= d40_width_to_bits(cfg->dst_info.data_width)
+ << D40_SREG_CFG_ESIZE_POS;
+
+ /* Set the priority bit to high for the physical channel */
+ if (cfg->high_priority) {
+ src |= BIT(D40_SREG_CFG_PRI_POS);
+ dst |= BIT(D40_SREG_CFG_PRI_POS);
}
if (cfg->src_info.big_endian)
- src |= 1 << D40_SREG_CFG_LBE_POS;
+ src |= BIT(D40_SREG_CFG_LBE_POS);
if (cfg->dst_info.big_endian)
- dst |= 1 << D40_SREG_CFG_LBE_POS;
+ dst |= BIT(D40_SREG_CFG_LBE_POS);
*src_cfg = src;
*dst_cfg = dst;
@@ -143,23 +149,22 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
num_elems = 2 << psize;
/* Must be aligned */
- if (!IS_ALIGNED(data, 0x1 << data_width))
+ if (!IS_ALIGNED(data, data_width))
return -EINVAL;
/* Transfer size can't be smaller than (num_elms * elem_size) */
- if (data_size < num_elems * (0x1 << data_width))
+ if (data_size < num_elems * data_width)
return -EINVAL;
/* The number of elements. IE now many chunks */
- lli->reg_elt = (data_size >> data_width) << D40_SREG_ELEM_PHY_ECNT_POS;
+ lli->reg_elt = (data_size / data_width) << D40_SREG_ELEM_PHY_ECNT_POS;
/*
* Distance to next element sized entry.
* Usually the size of the element unless you want gaps.
*/
if (addr_inc)
- lli->reg_elt |= (0x1 << data_width) <<
- D40_SREG_ELEM_PHY_EIDX_POS;
+ lli->reg_elt |= data_width << D40_SREG_ELEM_PHY_EIDX_POS;
/* Where the data is */
lli->reg_ptr = data;
@@ -167,18 +172,20 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
/* If this scatter list entry is the last one, no next link */
if (next_lli == 0)
- lli->reg_lnk = 0x1 << D40_SREG_LNK_PHY_TCP_POS;
+ lli->reg_lnk = BIT(D40_SREG_LNK_PHY_TCP_POS);
else
lli->reg_lnk = next_lli;
/* Set/clear interrupt generation on this link item.*/
if (term_int)
- lli->reg_cfg |= 0x1 << D40_SREG_CFG_TIM_POS;
+ lli->reg_cfg |= BIT(D40_SREG_CFG_TIM_POS);
else
- lli->reg_cfg &= ~(0x1 << D40_SREG_CFG_TIM_POS);
+ lli->reg_cfg &= ~BIT(D40_SREG_CFG_TIM_POS);
- /* Post link */
- lli->reg_lnk |= 0 << D40_SREG_LNK_PHY_PRE_POS;
+ /*
+ * Post link - D40_SREG_LNK_PHY_PRE_POS = 0
+ * Relink happens after transfer completion.
+ */
return 0;
}
@@ -187,16 +194,16 @@ static int d40_seg_size(int size, int data_width1, int data_width2)
{
u32 max_w = max(data_width1, data_width2);
u32 min_w = min(data_width1, data_width2);
- u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w);
+ u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
if (seg_max > STEDMA40_MAX_SEG_SIZE)
- seg_max -= (1 << max_w);
+ seg_max -= max_w;
if (size <= seg_max)
return size;
if (size <= 2 * seg_max)
- return ALIGN(size / 2, 1 << max_w);
+ return ALIGN(size / 2, max_w);
return seg_max;
}
@@ -362,10 +369,10 @@ static void d40_log_fill_lli(struct d40_log_lli *lli,
lli->lcsp13 = reg_cfg;
/* The number of elements to transfer */
- lli->lcsp02 = ((data_size >> data_width) <<
+ lli->lcsp02 = ((data_size / data_width) <<
D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK;
- BUG_ON((data_size >> data_width) > STEDMA40_MAX_SEG_SIZE);
+ BUG_ON((data_size / data_width) > STEDMA40_MAX_SEG_SIZE);
/* 16 LSBs address of the current element */
lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK;