diff options
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/Kconfig | 94 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 87 | ||||
| -rw-r--r-- | drivers/gpio/gpio-74x164.c (renamed from drivers/gpio/74x164.c) | 33 | ||||
| -rw-r--r-- | drivers/gpio/gpio-ab8500.c (renamed from drivers/gpio/ab8500-gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-adp5520.c (renamed from drivers/gpio/adp5520-gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-adp5588.c (renamed from drivers/gpio/adp5588-gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-bt8xx.c (renamed from drivers/gpio/bt8xxgpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-cs5535.c (renamed from drivers/gpio/cs5535-gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-da9052.c | 277 | ||||
| -rw-r--r-- | drivers/gpio/gpio-ep93xx.c | 405 | ||||
| -rw-r--r-- | drivers/gpio/gpio-exynos4.c | 34 | ||||
| -rw-r--r-- | drivers/gpio/gpio-generic.c (renamed from drivers/gpio/basic_mmio_gpio.c) | 6 | ||||
| -rw-r--r-- | drivers/gpio/gpio-it8761e.c (renamed from drivers/gpio/it8761e_gpio.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-janz-ttl.c (renamed from drivers/gpio/janz-ttl.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-langwell.c (renamed from drivers/gpio/langwell_gpio.c) | 6 | ||||
| -rw-r--r-- | drivers/gpio/gpio-max7300.c (renamed from drivers/gpio/max7300.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-max7301.c (renamed from drivers/gpio/max7301.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-max730x.c (renamed from drivers/gpio/max730x.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-max732x.c (renamed from drivers/gpio/max732x.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-mc33880.c (renamed from drivers/gpio/mc33880.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-mcp23s08.c (renamed from drivers/gpio/mcp23s08.c) | 291 | ||||
| -rw-r--r-- | drivers/gpio/gpio-ml-ioh.c (renamed from drivers/gpio/ml_ioh_gpio.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-mpc5200.c | 376 | ||||
| -rw-r--r-- | drivers/gpio/gpio-mxc.c | 460 | ||||
| -rw-r--r-- | drivers/gpio/gpio-mxs.c | 289 | ||||
| -rw-r--r-- | drivers/gpio/gpio-nomadik.c | 40 | ||||
| -rw-r--r-- | drivers/gpio/gpio-omap.c | 751 | ||||
| -rw-r--r-- | drivers/gpio/gpio-pca953x.c (renamed from drivers/gpio/pca953x.c) | 105 | ||||
| -rw-r--r-- | drivers/gpio/gpio-pcf857x.c (renamed from drivers/gpio/pcf857x.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-pch.c (renamed from drivers/gpio/pch_gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-pl061.c (renamed from drivers/gpio/pl061.c) | 4 | ||||
| -rw-r--r-- | drivers/gpio/gpio-plat-samsung.c | 3 | ||||
| -rw-r--r-- | drivers/gpio/gpio-rdc321x.c (renamed from drivers/gpio/rdc321x-gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-s5pc100.c | 5 | ||||
| -rw-r--r-- | drivers/gpio/gpio-s5pv210.c | 5 | ||||
| -rw-r--r-- | drivers/gpio/gpio-sch.c (renamed from drivers/gpio/sch_gpio.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-stmpe.c (renamed from drivers/gpio/stmpe-gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-sx150x.c (renamed from drivers/gpio/sx150x.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-tc3589x.c (renamed from drivers/gpio/tc3589x-gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-tegra.c | 441 | ||||
| -rw-r--r-- | drivers/gpio/gpio-timberdale.c (renamed from drivers/gpio/timbgpio.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-tps65910.c (renamed from drivers/gpio/tps65910-gpio.c) | 4 | ||||
| -rw-r--r-- | drivers/gpio/gpio-twl4030.c (renamed from drivers/gpio/twl4030-gpio.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-u300.c | 5 | ||||
| -rw-r--r-- | drivers/gpio/gpio-ucb1400.c (renamed from drivers/gpio/ucb1400_gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-vr41xx.c (renamed from drivers/gpio/vr41xx_giu.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-vx855.c (renamed from drivers/gpio/vx855_gpio.c) | 0 | ||||
| -rw-r--r-- | drivers/gpio/gpio-wm831x.c (renamed from drivers/gpio/wm831x-gpio.c) | 3 | ||||
| -rw-r--r-- | drivers/gpio/gpio-wm8350.c (renamed from drivers/gpio/wm8350-gpiolib.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-wm8994.c (renamed from drivers/gpio/wm8994-gpio.c) | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-xilinx.c (renamed from drivers/gpio/xilinx_gpio.c) | 0 |
51 files changed, 2901 insertions, 851 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 4a7f63143455..363498697c2c 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -63,56 +63,69 @@ config GPIO_SYSFS Kernel drivers may also request that a particular GPIO be exported to userspace; this can be useful when debugging. +config GPIO_GENERIC + tristate + # put drivers in the right section, in alphabetical order +config GPIO_DA9052 + tristate "Dialog DA9052 GPIO" + depends on PMIC_DA9052 + help + Say yes here to enable the GPIO driver for the DA9052 chip. + config GPIO_MAX730X tristate comment "Memory mapped GPIO drivers:" -config GPIO_BASIC_MMIO_CORE - tristate - help - Provides core functionality for basic memory-mapped GPIO controllers. - -config GPIO_BASIC_MMIO - tristate "Basic memory-mapped GPIO controllers support" - select GPIO_BASIC_MMIO_CORE +config GPIO_GENERIC_PLATFORM + tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" + select GPIO_GENERIC help - Say yes here to support basic memory-mapped GPIO controllers. + Say yes here to support basic platform_device memory-mapped GPIO controllers. config GPIO_IT8761E tristate "IT8761E GPIO support" help Say yes here to support GPIO functionality of IT8761E super I/O chip. +config GPIO_EP93XX + def_bool y + depends on ARCH_EP93XX + select GPIO_GENERIC + config GPIO_EXYNOS4 - bool "Samsung Exynos4 GPIO library support" - default y if CPU_EXYNOS4210 - depends on ARM - help - Say yes here to support Samsung Exynos4 series SoCs GPIO library + def_bool y + depends on CPU_EXYNOS4210 + +config GPIO_MPC5200 + def_bool y + depends on PPC_MPC52xx + +config GPIO_MXC + def_bool y + depends on ARCH_MXC + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + +config GPIO_MXS + def_bool y + depends on ARCH_MXS + select GPIO_GENERIC + select GENERIC_IRQ_CHIP config GPIO_PLAT_SAMSUNG - bool "Samsung SoCs GPIO library support" - default y if SAMSUNG_GPIOLIB_4BIT - depends on ARM - help - Say yes here to support Samsung SoCs GPIO library + def_bool y + depends on SAMSUNG_GPIOLIB_4BIT config GPIO_S5PC100 - bool "Samsung S5PC100 GPIO library support" - default y if CPU_S5PC100 - depends on ARM - help - Say yes here to support Samsung S5PC100 SoCs GPIO library + def_bool y + depends on CPU_S5PC100 config GPIO_S5PV210 - bool "Samsung S5PV210/S5PC110 GPIO library support" - default y if CPU_S5PV210 - depends on ARM - help - Say yes here to support Samsung S5PV210/S5PC110 SoCs GPIO library + def_bool y + depends on CPU_S5PV210 config GPIO_PL061 bool "PrimeCell PL061 GPIO support" @@ -149,9 +162,6 @@ config GPIO_SCH The Intel Tunnel Creek processor has 5 GPIOs powered by the core power rail and 9 from suspend power supply. - This driver can also be built as a module. If so, the module - will be called sch-gpio. - config GPIO_VX855 tristate "VIA VX855/VX875 GPIO" depends on MFD_SUPPORT && PCI @@ -214,9 +224,6 @@ config GPIO_PCA953X 16 bits: pca9535, pca9539, pca9555, tca6416 - This driver can also be built as a module. If so, the module - will be called pca953x. - config GPIO_PCA953X_IRQ bool "Interrupt controller support for PCA953x" depends on GPIO_PCA953X=y @@ -308,17 +315,12 @@ config GPIO_ADP5520 This option enables support for on-chip GPIO found on Analog Devices ADP5520 PMICs. - To compile this driver as a module, choose M here: the module will - be called adp5520-gpio. - config GPIO_ADP5588 tristate "ADP5588 I2C GPIO expander" depends on I2C help This option enables support for 18 GPIOs found on Analog Devices ADP5588 GPIO Expanders. - To compile this driver as a module, choose M here: the module will be - called adp5588-gpio. config GPIO_ADP5588_IRQ bool "Interrupt controller support for ADP5588" @@ -410,10 +412,11 @@ config GPIO_MAX7301 GPIO driver for Maxim MAX7301 SPI-based GPIO expander. config GPIO_MCP23S08 - tristate "Microchip MCP23Sxx I/O expander" - depends on SPI_MASTER + tristate "Microchip MCP23xxx I/O expander" + depends on SPI_MASTER || I2C help - SPI driver for Microchip MCP23S08/MPC23S17 I/O expanders. + SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 + I/O expanders. This provides a GPIO interface supporting inputs and outputs. config GPIO_MC33880 @@ -440,9 +443,6 @@ config GPIO_UCB1400 This enables support for the Philips UCB1400 GPIO pins. The UCB1400 is an AC97 audio codec. - To compile this driver as a module, choose M here: the - module will be called ucb1400_gpio. - comment "MODULbus GPIO expanders:" config GPIO_JANZ_TTL @@ -453,7 +453,7 @@ config GPIO_JANZ_TTL This driver provides support for driving the pins in output mode only. Input mode is not supported. -config AB8500_GPIO +config GPIO_AB8500 bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions" depends on AB8500_CORE && BROKEN help diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index b605f8ec6fbe..720711251391 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -4,47 +4,56 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG obj-$(CONFIG_GPIOLIB) += gpiolib.o -obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o -obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o -obj-$(CONFIG_GPIO_BASIC_MMIO_CORE) += basic_mmio_gpio.o -obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o +# Device drivers. Generally keep list sorted alphabetically +obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o + +obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o +obj-$(CONFIG_GPIO_AB8500) += gpio-ab8500.o +obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o +obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o +obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o +obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o +obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o +obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o +obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o +obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o +obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o +obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o +obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o +obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o +obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o +obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o +obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o +obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o +obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o +obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o +obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o +obj-$(CONFIG_PLAT_NOMADIK) += gpio-nomadik.o +obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o +obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o +obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o +obj-$(CONFIG_GPIO_PCH) += gpio-pch.o +obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o +obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o + obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o -obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o -obj-$(CONFIG_GPIO_MAX730X) += max730x.o -obj-$(CONFIG_GPIO_MAX7300) += max7300.o -obj-$(CONFIG_GPIO_MAX7301) += max7301.o -obj-$(CONFIG_GPIO_MAX732X) += max732x.o -obj-$(CONFIG_GPIO_MC33880) += mc33880.o -obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o -obj-$(CONFIG_GPIO_74X164) += 74x164.o -obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o -obj-$(CONFIG_GPIO_PCA953X) += pca953x.o -obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o -obj-$(CONFIG_GPIO_PCH) += pch_gpio.o -obj-$(CONFIG_GPIO_PL061) += pl061.o -obj-$(CONFIG_GPIO_STMPE) += stmpe-gpio.o -obj-$(CONFIG_GPIO_TC3589X) += tc3589x-gpio.o -obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o -obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o -obj-$(CONFIG_GPIO_UCB1400) += ucb1400_gpio.o -obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o -obj-$(CONFIG_GPIO_CS5535) += cs5535-gpio.o -obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o -obj-$(CONFIG_GPIO_IT8761E) += it8761e_gpio.o -obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o -obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o -obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o -obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o -obj-$(CONFIG_GPIO_SCH) += sch_gpio.o + +obj-$(CONFIG_GPIO_SCH) += gpio-sch.o +obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o +obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o +obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o +obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o +obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o +obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o +obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o obj-$(CONFIG_MACH_U300) += gpio-u300.o -obj-$(CONFIG_PLAT_NOMADIK) += gpio-nomadik.o -obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o -obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o -obj-$(CONFIG_GPIO_SX150X) += sx150x.o -obj-$(CONFIG_GPIO_VX855) += vx855_gpio.o -obj-$(CONFIG_GPIO_ML_IOH) += ml_ioh_gpio.o -obj-$(CONFIG_AB8500_GPIO) += ab8500-gpio.o -obj-$(CONFIG_GPIO_TPS65910) += tps65910-gpio.o +obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o +obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o +obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o +obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o +obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o +obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o +obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o diff --git a/drivers/gpio/74x164.c b/drivers/gpio/gpio-74x164.c index 84e070219839..ff525c0958dd 100644 --- a/drivers/gpio/74x164.c +++ b/drivers/gpio/gpio-74x164.c @@ -16,9 +16,6 @@ #include <linux/gpio.h> #include <linux/slab.h> -#define GEN_74X164_GPIO_COUNT 8 - - struct gen_74x164_chip { struct spi_device *spi; struct gpio_chip gpio_chip; @@ -26,9 +23,7 @@ struct gen_74x164_chip { u8 port_config; }; -static void gen_74x164_set_value(struct gpio_chip *, unsigned, int); - -static struct gen_74x164_chip *gpio_to_chip(struct gpio_chip *gc) +static struct gen_74x164_chip *gpio_to_74x164_chip(struct gpio_chip *gc) { return container_of(gc, struct gen_74x164_chip, gpio_chip); } @@ -39,16 +34,9 @@ static int __gen_74x164_write_config(struct gen_74x164_chip *chip) &chip->port_config, sizeof(chip->port_config)); } -static int gen_74x164_direction_output(struct gpio_chip *gc, - unsigned offset, int val) -{ - gen_74x164_set_value(gc, offset, val); - return 0; -} - static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset) { - struct gen_74x164_chip *chip = gpio_to_chip(gc); + struct gen_74x164_chip *chip = gpio_to_74x164_chip(gc); int ret; mutex_lock(&chip->lock); @@ -61,7 +49,7 @@ static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset) static void gen_74x164_set_value(struct gpio_chip *gc, unsigned offset, int val) { - struct gen_74x164_chip *chip = gpio_to_chip(gc); + struct gen_74x164_chip *chip = gpio_to_74x164_chip(gc); mutex_lock(&chip->lock); if (val) @@ -73,6 +61,13 @@ static void gen_74x164_set_value(struct gpio_chip *gc, mutex_unlock(&chip->lock); } +static int gen_74x164_direction_output(struct gpio_chip *gc, + unsigned offset, int val) +{ + gen_74x164_set_value(gc, offset, val); + return 0; +} + static int __devinit gen_74x164_probe(struct spi_device *spi) { struct gen_74x164_chip *chip; @@ -104,12 +99,12 @@ static int __devinit gen_74x164_probe(struct spi_device *spi) chip->spi = spi; - chip->gpio_chip.label = GEN_74X164_DRIVER_NAME, - chip->gpio_chip.direction_output = gen_74x164_direction_output; + chip->gpio_chip.label = spi->modalias; + chip->gpio_chip.direction_output = gen_74x164_direction_output; chip->gpio_chip.get = gen_74x164_get_value; chip->gpio_chip.set = gen_74x164_set_value; chip->gpio_chip.base = pdata->base; - chip->gpio_chip.ngpio = GEN_74X164_GPIO_COUNT; + chip->gpio_chip.ngpio = 8; chip->gpio_chip.can_sleep = 1; chip->gpio_chip.dev = &spi->dev; chip->gpio_chip.owner = THIS_MODULE; @@ -157,7 +152,7 @@ static int __devexit gen_74x164_remove(struct spi_device *spi) static struct spi_driver gen_74x164_driver = { .driver = { - .name = GEN_74X164_DRIVER_NAME, + .name = "74x164", .owner = THIS_MODULE, }, .probe = gen_74x164_probe, diff --git a/drivers/gpio/ab8500-gpio.c b/drivers/gpio/gpio-ab8500.c index 970053c89ff7..970053c89ff7 100644 --- a/drivers/gpio/ab8500-gpio.c +++ b/drivers/gpio/gpio-ab8500.c diff --git a/drivers/gpio/adp5520-gpio.c b/drivers/gpio/gpio-adp5520.c index 9f2781537001..9f2781537001 100644 --- a/drivers/gpio/adp5520-gpio.c +++ b/drivers/gpio/gpio-adp5520.c diff --git a/drivers/gpio/adp5588-gpio.c b/drivers/gpio/gpio-adp5588.c index 3525ad918771..3525ad918771 100644 --- a/drivers/gpio/adp5588-gpio.c +++ b/drivers/gpio/gpio-adp5588.c diff --git a/drivers/gpio/bt8xxgpio.c b/drivers/gpio/gpio-bt8xx.c index aa4f09ad3ced..aa4f09ad3ced 100644 --- a/drivers/gpio/bt8xxgpio.c +++ b/drivers/gpio/gpio-bt8xx.c diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/gpio-cs5535.c index 6e16cba56ad2..6e16cba56ad2 100644 --- a/drivers/gpio/cs5535-gpio.c +++ b/drivers/gpio/gpio-cs5535.c diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c new file mode 100644 index 000000000000..038f5eb8b13d --- /dev/null +++ b/drivers/gpio/gpio-da9052.c @@ -0,0 +1,277 @@ +/* + * GPIO Driver for Dialog DA9052 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/uaccess.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/syscalls.h> +#include <linux/seq_file.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> +#include <linux/mfd/da9052/pdata.h> +#include <linux/mfd/da9052/gpio.h> + +#define DA9052_INPUT 1 +#define DA9052_OUTPUT_OPENDRAIN 2 +#define DA9052_OUTPUT_PUSHPULL 3 + +#define DA9052_SUPPLY_VDD_IO1 0 + +#define DA9052_DEBOUNCING_OFF 0 +#define DA9052_DEBOUNCING_ON 1 + +#define DA9052_OUTPUT_LOWLEVEL 0 + +#define DA9052_ACTIVE_LOW 0 +#define DA9052_ACTIVE_HIGH 1 + +#define DA9052_GPIO_MAX_PORTS_PER_REGISTER 8 +#define DA9052_GPIO_SHIFT_COUNT(no) (no%8) +#define DA9052_GPIO_MASK_UPPER_NIBBLE 0xF0 +#define DA9052_GPIO_MASK_LOWER_NIBBLE 0x0F +#define DA9052_GPIO_NIBBLE_SHIFT 4 + +struct da9052_gpio { + struct da9052 *da9052; + struct gpio_chip gp; +}; + +static inline struct da9052_gpio *to_da9052_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct da9052_gpio, gp); +} + +static unsigned char da9052_gpio_port_odd(unsigned offset) +{ + return offset % 2; +} + +static int da9052_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct da9052_gpio *gpio = to_da9052_gpio(gc); + int da9052_port_direction = 0; + int ret; + + ret = da9052_reg_read(gpio->da9052, + DA9052_GPIO_0_1_REG + (offset >> 1)); + if (ret < 0) + return ret; + + if (da9052_gpio_port_odd(offset)) { + da9052_port_direction = ret & DA9052_GPIO_ODD_PORT_PIN; + da9052_port_direction >>= 4; + } else { + da9052_port_direction = ret & DA9052_GPIO_EVEN_PORT_PIN; + } + + switch (da9052_port_direction) { + case DA9052_INPUT: + if (offset < DA9052_GPIO_MAX_PORTS_PER_REGISTER) + ret = da9052_reg_read(gpio->da9052, + DA9052_STATUS_C_REG); + else + ret = da9052_reg_read(gpio->da9052, + DA9052_STATUS_D_REG); + if (ret < 0) + return ret; + if (ret & (1 << DA9052_GPIO_SHIFT_COUNT(offset))) + return 1; + else + return 0; + case DA9052_OUTPUT_PUSHPULL: + if (da9052_gpio_port_odd(offset)) + return ret & DA9052_GPIO_ODD_PORT_MODE; + else + return ret & DA9052_GPIO_EVEN_PORT_MODE; + default: + return -EINVAL; + } +} + +static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct da9052_gpio *gpio = to_da9052_gpio(gc); + unsigned char register_value = 0; + int ret; + + if (da9052_gpio_port_odd(offset)) { + if (value) { + register_value = DA9052_GPIO_ODD_PORT_MODE; + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_ODD_PORT_MODE, + register_value); + if (ret != 0) + dev_err(gpio->da9052->dev, + "Failed to updated gpio odd reg,%d", + ret); + } + } else { + if (value) { + register_value = DA9052_GPIO_EVEN_PORT_MODE; + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_EVEN_PORT_MODE, + register_value); + if (ret != 0) + dev_err(gpio->da9052->dev, + "Failed to updated gpio even reg,%d", + ret); + } + } +} + +static int da9052_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct da9052_gpio *gpio = to_da9052_gpio(gc); + unsigned char register_value; + int ret; + + /* Format: function - 2 bits type - 1 bit mode - 1 bit */ + register_value = DA9052_INPUT | DA9052_ACTIVE_LOW << 2 | + DA9052_DEBOUNCING_ON << 3; + + if (da9052_gpio_port_odd(offset)) + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_MASK_UPPER_NIBBLE, + (register_value << + DA9052_GPIO_NIBBLE_SHIFT)); + else + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_MASK_LOWER_NIBBLE, + register_value); + + return ret; +} + +static int da9052_gpio_direction_output(struct gpio_chip *gc, + unsigned offset, int value) +{ + struct da9052_gpio *gpio = to_da9052_gpio(gc); + unsigned char register_value; + int ret; + + /* Format: Function - 2 bits Type - 1 bit Mode - 1 bit */ + register_value = DA9052_OUTPUT_PUSHPULL | DA9052_SUPPLY_VDD_IO1 << 2 | + value << 3; + + if (da9052_gpio_port_odd(offset)) + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_MASK_UPPER_NIBBLE, + (register_value << + DA9052_GPIO_NIBBLE_SHIFT)); + else + ret = da9052_reg_update(gpio->da9052, (offset >> 1) + + DA9052_GPIO_0_1_REG, + DA9052_GPIO_MASK_LOWER_NIBBLE, + register_value); + + return ret; +} + +static int da9052_gpio_to_irq(struct gpio_chip *gc, u32 offset) +{ + struct da9052_gpio *gpio = to_da9052_gpio(gc); + struct da9052 *da9052 = gpio->da9052; + + return da9052->irq_base + DA9052_IRQ_GPI0 + offset; +} + +static struct gpio_chip reference_gp __devinitdata = { + .label = "da9052-gpio", + .owner = THIS_MODULE, + .get = da9052_gpio_get, + .set = da9052_gpio_set, + .direction_input = da9052_gpio_direction_input, + .direction_output = da9052_gpio_direction_output, + .to_irq = da9052_gpio_to_irq, + .can_sleep = 1; + .ngpio = 16; + .base = -1; +}; + +static int __devinit da9052_gpio_probe(struct platform_device *pdev) +{ + struct da9052_gpio *gpio; + struct da9052_pdata *pdata; + int ret; + + gpio = kzalloc(sizeof(*gpio), GFP_KERNEL); + if (gpio == NULL) + return -ENOMEM; + + gpio->da9052 = dev_get_drvdata(pdev->dev.parent); + pdata = gpio->da9052->dev->platform_data; + + gpio->gp = reference_gp; + if (pdata && pdata->gpio_base) + gpio->gp.base = pdata->gpio_base; + + ret = gpiochip_add(&gpio->gp); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + goto err_mem; + } + + platform_set_drvdata(pdev, gpio); + + return 0; + +err_mem: + kfree(gpio); + return ret; +} + +static int __devexit da9052_gpio_remove(struct platform_device *pdev) +{ + struct da9052_gpio *gpio = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&gpio->gp); + if (ret == 0) + kfree(gpio); + + return ret; +} + +static struct platform_driver da9052_gpio_driver = { + .probe = da9052_gpio_probe, + .remove = __devexit_p(da9052_gpio_remove), + .driver = { + .name = "da9052-gpio", + .owner = THIS_MODULE, + }, +}; + +static int __init da9052_gpio_init(void) +{ + return platform_driver_register(&da9052_gpio_driver); +} +module_init(da9052_gpio_init); + +static void __exit da9052_gpio_exit(void) +{ + return platform_driver_unregister(&da9052_gpio_driver); +} +module_exit(da9052_gpio_exit); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("DA9052 GPIO Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-gpio"); diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c new file mode 100644 index 000000000000..3bfd3417ab11 --- /dev/null +++ b/drivers/gpio/gpio-ep93xx.c @@ -0,0 +1,405 @@ +/* + * Generic EP93xx GPIO handling + * + * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> + * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * Based on code originally from: + * linux/arch/arm/mach-ep93xx/core.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/basic_mmio_gpio.h> + +#include <mach/hardware.h> + +struct ep93xx_gpio { + void __iomem *mmio_base; + struct bgpio_chip bgc[8]; +}; + +/************************************************************************* + * Interrupt handling for EP93xx on-chip GPIOs + *************************************************************************/ +static unsigned char gpio_int_unmasked[3]; +static unsigned char gpio_int_enabled[3]; +static unsigned char gpio_int_type1[3]; +static unsigned char gpio_int_type2[3]; +static unsigned char gpio_int_debounce[3]; + +/* Port ordering is: A B F */ +static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; +static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; +static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; +static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; +static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; + +static void ep93xx_gpio_update_int_params(unsigned port) +{ + BUG_ON(port > 2); + + __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); + + __raw_writeb(gpio_int_type2[port], + EP93XX_GPIO_REG(int_type2_register_offset[port])); + + __raw_writeb(gpio_int_type1[port], + EP93XX_GPIO_REG(int_type1_register_offset[port])); + + __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], + EP93XX_GPIO_REG(int_en_register_offset[port])); +} + +static inline void ep93xx_gpio_int_mask(unsigned line) +{ + gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); +} + +static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) +{ + int line = irq_to_gpio(irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if (enable) + gpio_int_debounce[port] |= port_mask; + else + gpio_int_debounce[port] &= ~port_mask; + + __raw_writeb(gpio_int_debounce[port], + EP93XX_GPIO_REG(int_debounce_register_offset[port])); +} + +static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned char status; + int i; + + status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); + for (i = 0; i < 8; i++) { + if (status & (1 << i)) { + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; + generic_handle_irq(gpio_irq); + } + } + + status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); + for (i = 0; i < 8; i++) { + if (status & (1 << i)) { + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; + generic_handle_irq(gpio_irq); + } + } +} + +static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + /* + * map discontiguous hw irq range to continuous sw irq range: + * + * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) + */ + int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; + + generic_handle_irq(gpio_irq); +} + +static void ep93xx_gpio_irq_ack(struct irq_data *d) +{ + int line = irq_to_gpio(d->irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + ep93xx_gpio_update_int_params(port); + } + + __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); +} + +static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) +{ + int line = irq_to_gpio(d->irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + + gpio_int_unmasked[port] &= ~port_mask; + ep93xx_gpio_update_int_params(port); + + __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); +} + +static void ep93xx_gpio_irq_mask(struct irq_data *d) +{ + int line = irq_to_gpio(d->irq); + int port = line >> 3; + + gpio_int_unmasked[port] &= ~(1 << (line & 7)); + ep93xx_gpio_update_int_params(port); +} + +static void ep93xx_gpio_irq_unmask(struct irq_data *d) +{ + int line = irq_to_gpio(d->irq); + int port = line >> 3; + + gpio_int_unmasked[port] |= 1 << (line & 7); + ep93xx_gpio_update_int_params(port); +} + +/* + * gpio_int_type1 controls whether the interrupt is level (0) or + * edge (1) triggered, while gpio_int_type2 controls whether it + * triggers on low/falling (0) or high/rising (1). + */ +static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) +{ + const int gpio = irq_to_gpio(d->irq); + const int port = gpio >> 3; + const int port_mask = 1 << (gpio & 7); + irq_flow_handler_t handler; + + gpio_direction_input(gpio); + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] |= port_mask; + handler = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] &= ~port_mask; + handler = handle_edge_irq; + break; + case IRQ_TYPE_LEVEL_HIGH: + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] |= port_mask; + handler = handle_level_irq; + break; + case IRQ_TYPE_LEVEL_LOW: + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] &= ~port_mask; + handler = handle_level_irq; + break; + case IRQ_TYPE_EDGE_BOTH: + gpio_int_type1[port] |= port_mask; + /* set initial polarity based on current input level */ + if (gpio_get_value(gpio)) + gpio_int_type2[port] &= ~port_mask; /* falling */ + else + gpio_int_type2[port] |= port_mask; /* rising */ + handler = handle_edge_irq; + break; + default: + pr_err("failed to set irq type %d for gpio %d\n", type, gpio); + return -EINVAL; + } + + __irq_set_handler_locked(d->irq, handler); + + gpio_int_enabled[port] |= port_mask; + + ep93xx_gpio_update_int_params(port); + + return 0; +} + +static struct irq_chip ep93xx_gpio_irq_chip = { + .name = "GPIO", + .irq_ack = ep93xx_gpio_irq_ack, + .irq_mask_ack = ep93xx_gpio_irq_mask_ack, + .irq_mask = ep93xx_gpio_irq_mask, + .irq_unmask = ep93xx_gpio_irq_unmask, + .irq_set_type = ep93xx_gpio_irq_type, +}; + +static void ep93xx_gpio_init_irq(void) +{ + int gpio_irq; + + for (gpio_irq = gpio_to_irq(0); + gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { + irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, + handle_level_irq); + set_irq_flags(gpio_irq, IRQF_VALID); + } + + irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, + ep93xx_gpio_ab_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, + ep93xx_gpio_f_irq_handler); + irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, + ep93xx_gpio_f_irq_handler); +} + + +/************************************************************************* + * gpiolib interface for EP93xx on-chip GPIOs + *************************************************************************/ +struct ep93xx_gpio_bank { + const char *label; + int data; + int dir; + int base; + bool has_debounce; +}; + +#define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _debounce) \ + { \ + .label = _label, \ + .data = _data, \ + .dir = _dir, \ + .base = _base, \ + .has_debounce = _debounce, \ + } + +static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = { + EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true), + EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true), + EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false), + EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false), + EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false), + EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, true), + EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false), + EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false), +}; + +static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, + unsigned offset, unsigned debounce) +{ + int gpio = chip->base + offset; + int irq = gpio_to_irq(gpio); + + if (irq < 0) + return -EINVAL; + + ep93xx_gpio_int_debounce(irq, debounce ? true : false); + + return 0; +} + +static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev, + void __iomem *mmio_base, struct ep93xx_gpio_bank *bank) +{ + void __iomem *data = mmio_base + bank->data; + void __iomem *dir = mmio_base + bank->dir; + int err; + + err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, false); + if (err) + return err; + + bgc->gc.label = bank->label; + bgc->gc.base = bank->base; + + if (bank->has_debounce) + bgc->gc.set_debounce = ep93xx_gpio_set_debounce; + + return gpiochip_add(&bgc->gc); +} + +static int __devinit ep93xx_gpio_probe(struct platform_device *pdev) +{ + struct ep93xx_gpio *ep93xx_gpio; + struct resource *res; + void __iomem *mmio; + int i; + int ret; + + ep93xx_gpio = kzalloc(sizeof(*ep93xx_gpio), GFP_KERNEL); + if (!ep93xx_gpio) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENXIO; + goto exit_free; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + ret = -EBUSY; + goto exit_free; + } + + mmio = ioremap(res->start, resource_size(res)); + if (!mmio) { + ret = -ENXIO; + goto exit_release; + } + ep93xx_gpio->mmio_base = mmio; + + /* Default all ports to GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK | + EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { + struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i]; + struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i]; + + if (ep93xx_gpio_add_bank(bgc, &pdev->dev, mmio, bank)) + dev_warn(&pdev->dev, "Unable to add gpio bank %s\n", + bank->label); + } + + ep93xx_gpio_init_irq(); + + return 0; + +exit_release: + release_mem_region(res->start, resource_size(res)); +exit_free: + kfree(ep93xx_gpio); + dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, ret); + return ret; +} + +static struct platform_driver ep93xx_gpio_driver = { + .driver = { + .name = "gpio-ep93xx", + .owner = THIS_MODULE, + }, + .probe = ep93xx_gpio_probe, +}; + +static int __init ep93xx_gpio_init(void) +{ + return platform_driver_register(&ep93xx_gpio_driver); +} +postcore_initcall(ep93xx_gpio_init); + +MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com> " + "H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_DESCRIPTION("EP93XX GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c index d54ca6adb660..d24b337cf1ac 100644 --- a/drivers/gpio/gpio-exynos4.c +++ b/drivers/gpio/gpio-exynos4.c @@ -1,10 +1,9 @@ -/* linux/arch/arm/mach-exynos4/gpiolib.c +/* + * EXYNOS4 - GPIOlib support * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4 - GPIOlib support - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -21,16 +20,37 @@ #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> +int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + if (pull == S3C_GPIO_PULL_UP) + pull = 3; + + return s3c_gpio_setpull_updown(chip, off, pull); +} + +s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip, + unsigned int off) +{ + s3c_gpio_pull_t pull; + + pull = s3c_gpio_getpull_updown(chip, off); + if (pull == 3) + pull = S3C_GPIO_PULL_UP; + + return pull; +} + static struct s3c_gpio_cfg gpio_cfg = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, + .set_pull = s3c_gpio_setpull_exynos4, + .get_pull = s3c_gpio_getpull_exynos4, }; static struct s3c_gpio_cfg gpio_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, + .set_pull = s3c_gpio_setpull_exynos4, + .get_pull = s3c_gpio_getpull_exynos4, }; /* diff --git a/drivers/gpio/basic_mmio_gpio.c b/drivers/gpio/gpio-generic.c index 8152e9f516b0..231714def4d2 100644 --- a/drivers/gpio/basic_mmio_gpio.c +++ b/drivers/gpio/gpio-generic.c @@ -1,5 +1,5 @@ /* - * Driver for basic memory-mapped GPIO controllers. + * Generic driver for memory-mapped GPIO controllers. * * Copyright 2008 MontaVista Software, Inc. * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com> @@ -404,7 +404,7 @@ int __devinit bgpio_init(struct bgpio_chip *bgc, } EXPORT_SYMBOL_GPL(bgpio_init); -#ifdef CONFIG_GPIO_BASIC_MMIO +#ifdef CONFIG_GPIO_GENERIC_PLATFORM static void __iomem *bgpio_map(struct platform_device *pdev, const char *name, @@ -541,7 +541,7 @@ static void __exit bgpio_platform_exit(void) } module_exit(bgpio_platform_exit); -#endif /* CONFIG_GPIO_BASIC_MMIO */ +#endif /* CONFIG_GPIO_GENERIC_PLATFORM */ MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers"); MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>"); diff --git a/drivers/gpio/it8761e_gpio.c b/drivers/gpio/gpio-it8761e.c index 48fc43c4bdd1..278b81317010 100644 --- a/drivers/gpio/it8761e_gpio.c +++ b/drivers/gpio/gpio-it8761e.c @@ -1,5 +1,5 @@ /* - * it8761_gpio.c - GPIO interface for IT8761E Super I/O chip + * GPIO interface for IT8761E Super I/O chip * * Author: Denis Turischev <denis@compulab.co.il> * diff --git a/drivers/gpio/janz-ttl.c b/drivers/gpio/gpio-janz-ttl.c index 813ac077e5d7..813ac077e5d7 100644 --- a/drivers/gpio/janz-ttl.c +++ b/drivers/gpio/gpio-janz-ttl.c diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/gpio-langwell.c index bd6571e0097a..d2eb57c60e0e 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/gpio-langwell.c @@ -1,4 +1,6 @@ -/* langwell_gpio.c Moorestown platform Langwell chip GPIO driver +/* + * Moorestown platform Langwell chip GPIO driver + * * Copyright (c) 2008 - 2009, Intel Corporation. * * This program is free software; you can redistribute it and/or modify @@ -223,7 +225,7 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) gedr = gpio_reg(&lnw->chip, base, GEDR); pending = readl(gedr); while (pending) { - gpio = __ffs(pending) - 1; + gpio = __ffs(pending); mask = BIT(gpio); pending &= ~mask; /* Clear before handling so we can't lose an edge */ diff --git a/drivers/gpio/max7300.c b/drivers/gpio/gpio-max7300.c index 962f661c18c7..a5ca0ab1b372 100644 --- a/drivers/gpio/max7300.c +++ b/drivers/gpio/gpio-max7300.c @@ -1,6 +1,4 @@ /* - * drivers/gpio/max7300.c - * * Copyright (C) 2009 Wolfram Sang, Pengutronix * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/gpio/max7301.c b/drivers/gpio/gpio-max7301.c index 92a100ddef6b..741acfcbe761 100644 --- a/drivers/gpio/max7301.c +++ b/drivers/gpio/gpio-max7301.c @@ -1,6 +1,4 @@ /* - * drivers/gpio/max7301.c - * * Copyright (C) 2006 Juergen Beisert, Pengutronix * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix * Copyright (C) 2009 Wolfram Sang, Pengutronix diff --git a/drivers/gpio/max730x.c b/drivers/gpio/gpio-max730x.c index 94ce773f95f8..05e2dac60b3b 100644 --- a/drivers/gpio/max730x.c +++ b/drivers/gpio/gpio-max730x.c @@ -1,6 +1,4 @@ /** - * drivers/gpio/max7301.c - * * Copyright (C) 2006 Juergen Beisert, Pengutronix * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix * Copyright (C) 2009 Wolfram Sang, Pengutronix diff --git a/drivers/gpio/max732x.c b/drivers/gpio/gpio-max732x.c index ad6951edc16c..9504120812a5 100644 --- a/drivers/gpio/max732x.c +++ b/drivers/gpio/gpio-max732x.c @@ -1,5 +1,5 @@ /* - * max732x.c - I2C Port Expander with 8/16 I/O + * MAX732x I2C Port Expander with 8/16 I/O * * Copyright (C) 2007 Marvell International Ltd. * Copyright (C) 2008 Jack Ren <jack.ren@marvell.com> diff --git a/drivers/gpio/mc33880.c b/drivers/gpio/gpio-mc33880.c index 4ec797593bdb..b3b4652e89ec 100644 --- a/drivers/gpio/mc33880.c +++ b/drivers/gpio/gpio-mc33880.c @@ -1,5 +1,5 @@ /* - * mc33880.c MC33880 high-side/low-side switch GPIO driver + * MC33880 high-side/low-side switch GPIO driver * Copyright (c) 2009 Intel Corporation * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 40e076083ec0..1ef46e6c2a2a 100644 --- a/drivers/gpio/mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -1,12 +1,12 @@ /* - * mcp23s08.c - SPI gpio expander driver + * MCP23S08 SPI/GPIO gpio expander driver */ #include <linux/kernel.h> #include <linux/device.h> -#include <linux/workqueue.h> #include <linux/mutex.h> #include <linux/gpio.h> +#include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/spi/mcp23s08.h> #include <linux/slab.h> @@ -17,13 +17,13 @@ */ #define MCP_TYPE_S08 0 #define MCP_TYPE_S17 1 +#define MCP_TYPE_008 2 +#define MCP_TYPE_017 3 /* Registers are all 8 bits wide. * * The mcp23s17 has twice as many bits, and can be configured to work * with either 16 bit registers or with two adjacent 8 bit banks. - * - * Also, there are I2C versions of both chips. */ #define MCP_IODIR 0x00 /* init/reset: all ones */ #define MCP_IPOL 0x01 @@ -51,7 +51,6 @@ struct mcp23s08_ops { }; struct mcp23s08 { - struct spi_device *spi; u8 addr; u16 cache[11]; @@ -60,9 +59,8 @@ struct mcp23s08 { struct gpio_chip chip; - struct work_struct work; - const struct mcp23s08_ops *ops; + void *data; /* ops specific data */ }; /* A given spi_device can represent up to eight mcp23sxx chips @@ -76,6 +74,74 @@ struct mcp23s08_driver_data { struct mcp23s08 chip[]; }; +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_I2C + +static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg) +{ + return i2c_smbus_read_byte_data(mcp->data, reg); +} + +static int mcp23008_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) +{ + return i2c_smbus_write_byte_data(mcp->data, reg, val); +} + +static int +mcp23008_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) +{ + while (n--) { + int ret = mcp23008_read(mcp, reg++); + if (ret < 0) + return ret; + *vals++ = ret; + } + + return 0; +} + +static int mcp23017_read(struct mcp23s08 *mcp, unsigned reg) +{ + return i2c_smbus_read_word_data(mcp->data, reg << 1); +} + +static int mcp23017_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) +{ + return i2c_smbus_write_word_data(mcp->data, reg << 1, val); +} + +static int +mcp23017_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) +{ + while (n--) { + int ret = mcp23017_read(mcp, reg++); + if (ret < 0) + return ret; + *vals++ = ret; + } + + return 0; +} + +static const struct mcp23s08_ops mcp23008_ops = { + .read = mcp23008_read, + .write = mcp23008_write, + .read_regs = mcp23008_read_regs, +}; + +static const struct mcp23s08_ops mcp23017_ops = { + .read = mcp23017_read, + .write = mcp23017_write, + .read_regs = mcp23017_read_regs, +}; + +#endif /* CONFIG_I2C */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_SPI_MASTER + static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg) { u8 tx[2], rx[1]; @@ -83,7 +149,7 @@ static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg) tx[0] = mcp->addr | 0x01; tx[1] = reg; - status = spi_write_then_read(mcp->spi, tx, sizeof tx, rx, sizeof rx); + status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx); return (status < 0) ? status : rx[0]; } @@ -94,7 +160,7 @@ static int mcp23s08_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) tx[0] = mcp->addr; tx[1] = reg; tx[2] = val; - return spi_write_then_read(mcp->spi, tx, sizeof tx, NULL, 0); + return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0); } static int @@ -109,7 +175,7 @@ mcp23s08_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) tx[1] = reg; tmp = (u8 *)vals; - status = spi_write_then_read(mcp->spi, tx, sizeof tx, tmp, n); + status = spi_write_then_read(mcp->data, tx, sizeof tx, tmp, n); if (status >= 0) { while (n--) vals[n] = tmp[n]; /* expand to 16bit */ @@ -124,7 +190,7 @@ static int mcp23s17_read(struct mcp23s08 *mcp, unsigned reg) tx[0] = mcp->addr | 0x01; tx[1] = reg << 1; - status = spi_write_then_read(mcp->spi, tx, sizeof tx, rx, sizeof rx); + status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx); return (status < 0) ? status : (rx[0] | (rx[1] << 8)); } @@ -136,7 +202,7 @@ static int mcp23s17_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) tx[1] = reg << 1; tx[2] = val; tx[3] = val >> 8; - return spi_write_then_read(mcp->spi, tx, sizeof tx, NULL, 0); + return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0); } static int @@ -150,7 +216,7 @@ mcp23s17_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) tx[0] = mcp->addr | 0x01; tx[1] = reg << 1; - status = spi_write_then_read(mcp->spi, tx, sizeof tx, + status = spi_write_then_read(mcp->data, tx, sizeof tx, (u8 *)vals, n * 2); if (status >= 0) { while (n--) @@ -172,6 +238,7 @@ static const struct mcp23s08_ops mcp23s17_ops = { .read_regs = mcp23s17_read_regs, }; +#endif /* CONFIG_SPI_MASTER */ /*----------------------------------------------------------------------*/ @@ -299,17 +366,16 @@ done: /*----------------------------------------------------------------------*/ -static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr, +static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, + void *data, unsigned addr, unsigned type, unsigned base, unsigned pullups) { - struct mcp23s08_driver_data *data = spi_get_drvdata(spi); - struct mcp23s08 *mcp = data->mcp[addr]; - int status; + int status; mutex_init(&mcp->lock); - mcp->spi = spi; - mcp->addr = 0x40 | (addr << 1); + mcp->data = data; + mcp->addr = addr; mcp->chip.direction_input = mcp23s08_direction_input; mcp->chip.get = mcp23s08_get; @@ -317,18 +383,43 @@ static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr, mcp->chip.set = mcp23s08_set; mcp->chip.dbg_show = mcp23s08_dbg_show; - if (type == MCP_TYPE_S17) { + switch (type) { +#ifdef CONFIG_SPI_MASTER + case MCP_TYPE_S08: + mcp->ops = &mcp23s08_ops; + mcp->chip.ngpio = 8; + mcp->chip.label = "mcp23s08"; + break; + + case MCP_TYPE_S17: mcp->ops = &mcp23s17_ops; mcp->chip.ngpio = 16; mcp->chip.label = "mcp23s17"; - } else { - mcp->ops = &mcp23s08_ops; + break; +#endif /* CONFIG_SPI_MASTER */ + +#ifdef CONFIG_I2C + case MCP_TYPE_008: + mcp->ops = &mcp23008_ops; mcp->chip.ngpio = 8; - mcp->chip.label = "mcp23s08"; + mcp->chip.label = "mcp23008"; + break; + + case MCP_TYPE_017: + mcp->ops = &mcp23017_ops; + mcp->chip.ngpio = 16; + mcp->chip.label = "mcp23017"; + break; +#endif /* CONFIG_I2C */ + + default: + dev_err(dev, "invalid device type (%d)\n", type); + return -EINVAL; } + mcp->chip.base = base; mcp->chip.can_sleep = 1; - mcp->chip.dev = &spi->dev; + mcp->chip.dev = dev; mcp->chip.owner = THIS_MODULE; /* verify MCP_IOCON.SEQOP = 0, so sequential reads work, @@ -374,11 +465,98 @@ static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr, status = gpiochip_add(&mcp->chip); fail: if (status < 0) - dev_dbg(&spi->dev, "can't setup chip %d, --> %d\n", - addr, status); + dev_dbg(dev, "can't setup chip %d, --> %d\n", + addr, status); return status; } +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_I2C + +static int __devinit mcp230xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mcp23s08_platform_data *pdata; + struct mcp23s08 *mcp; + int status; + + pdata = client->dev.platform_data; + if (!pdata || !gpio_is_valid(pdata->base)) { + dev_dbg(&client->dev, "invalid or missing platform data\n"); + return -EINVAL; + } + + mcp = kzalloc(sizeof *mcp, GFP_KERNEL); + if (!mcp) + return -ENOMEM; + + status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr, + id->driver_data, pdata->base, + pdata->chip[0].pullups); + if (status) + goto fail; + + i2c_set_clientdata(client, mcp); + + return 0; + +fail: + kfree(mcp); + + return status; +} + +static int __devexit mcp230xx_remove(struct i2c_client *client) +{ + struct mcp23s08 *mcp = i2c_get_clientdata(client); + int status; + + status = gpiochip_remove(&mcp->chip); + if (status == 0) + kfree(mcp); + + return status; +} + +static const struct i2c_device_id mcp230xx_id[] = { + { "mcp23008", MCP_TYPE_008 }, + { "mcp23017", MCP_TYPE_017 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, mcp230xx_id); + +static struct i2c_driver mcp230xx_driver = { + .driver = { + .name = "mcp230xx", + .owner = THIS_MODULE, + }, + .probe = mcp230xx_probe, + .remove = __devexit_p(mcp230xx_remove), + .id_table = mcp230xx_id, +}; + +static int __init mcp23s08_i2c_init(void) +{ + return i2c_add_driver(&mcp230xx_driver); +} + +static void mcp23s08_i2c_exit(void) +{ + i2c_del_driver(&mcp230xx_driver); +} + +#else + +static int __init mcp23s08_i2c_init(void) { return 0; } +static void mcp23s08_i2c_exit(void) { } + +#endif /* CONFIG_I2C */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_SPI_MASTER + static int mcp23s08_probe(struct spi_device *spi) { struct mcp23s08_platform_data *pdata; @@ -421,7 +599,8 @@ static int mcp23s08_probe(struct spi_device *spi) continue; chips--; data->mcp[addr] = &data->chip[chips]; - status = mcp23s08_probe_one(spi, addr, type, base, + status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi, + 0x40 | (addr << 1), type, base, pdata->chip[addr].pullups); if (status < 0) goto fail; @@ -435,14 +614,6 @@ static int mcp23s08_probe(struct spi_device *spi) * handled here... */ - if (pdata->setup) { - status = pdata->setup(spi, - pdata->base, data->ngpio, - pdata->context); - if (status < 0) - dev_dbg(&spi->dev, "setup --> %d\n", status); - } - return 0; fail: @@ -462,20 +633,9 @@ fail: static int mcp23s08_remove(struct spi_device *spi) { struct mcp23s08_driver_data *data = spi_get_drvdata(spi); - struct mcp23s08_platform_data *pdata = spi->dev.platform_data; unsigned addr; int status = 0; - if (pdata->teardown) { - status = pdata->teardown(spi, - pdata->base, data->ngpio, - pdata->context); - if (status < 0) { - dev_err(&spi->dev, "%s --> %d\n", "teardown", status); - return status; - } - } - for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) { int tmp; @@ -510,20 +670,53 @@ static struct spi_driver mcp23s08_driver = { }, }; +static int __init mcp23s08_spi_init(void) +{ + return spi_register_driver(&mcp23s08_driver); +} + +static void mcp23s08_spi_exit(void) +{ + spi_unregister_driver(&mcp23s08_driver); +} + +#else + +static int __init mcp23s08_spi_init(void) { return 0; } +static void mcp23s08_spi_exit(void) { } + +#endif /* CONFIG_SPI_MASTER */ + /*----------------------------------------------------------------------*/ static int __init mcp23s08_init(void) { - return spi_register_driver(&mcp23s08_driver); + int ret; + + ret = mcp23s08_spi_init(); + if (ret) + goto spi_fail; + + ret = mcp23s08_i2c_init(); + if (ret) + goto i2c_fail; + + return 0; + + i2c_fail: + mcp23s08_spi_exit(); + spi_fail: + return ret; } -/* register after spi postcore initcall and before +/* register after spi/i2c postcore initcall and before * subsys initcalls that may rely on these GPIOs */ subsys_initcall(mcp23s08_init); static void __exit mcp23s08_exit(void) { - spi_unregister_driver(&mcp23s08_driver); + mcp23s08_spi_exit(); + mcp23s08_i2c_exit(); } module_exit(mcp23s08_exit); diff --git a/drivers/gpio/ml_ioh_gpio.c b/drivers/gpio/gpio-ml-ioh.c index 1bc621ac3536..a9016f56ed7e 100644 --- a/drivers/gpio/ml_ioh_gpio.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -233,7 +233,7 @@ static int __devinit ioh_gpio_probe(struct pci_dev *pdev, return 0; err_gpiochip_add: - for (; i != 0; i--) { + while (--i >= 0) { chip--; ret = gpiochip_remove(&chip->gpio); if (ret) diff --git a/drivers/gpio/gpio-mpc5200.c b/drivers/gpio/gpio-mpc5200.c new file mode 100644 index 000000000000..52d3ed208105 --- /dev/null +++ b/drivers/gpio/gpio-mpc5200.c @@ -0,0 +1,376 @@ +/* + * MPC52xx gpio driver + * + * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/of.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/of_gpio.h> +#include <linux/io.h> +#include <linux/of_platform.h> + +#include <asm/gpio.h> +#include <asm/mpc52xx.h> +#include <sysdev/fsl_soc.h> + +static DEFINE_SPINLOCK(gpio_lock); + +struct mpc52xx_gpiochip { + struct of_mm_gpio_chip mmchip; + unsigned int shadow_dvo; + unsigned int shadow_gpioe; + unsigned int shadow_ddr; +}; + +/* + * GPIO LIB API implementation for wakeup GPIOs. + * + * There's a maximum of 8 wakeup GPIOs. Which of these are available + * for use depends on your board setup. + * + * 0 -> GPIO_WKUP_7 + * 1 -> GPIO_WKUP_6 + * 2 -> PSC6_1 + * 3 -> PSC6_0 + * 4 -> ETH_17 + * 5 -> PSC3_9 + * 6 -> PSC2_4 + * 7 -> PSC1_4 + * + */ +static int mpc52xx_wkup_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + unsigned int ret; + + ret = (in_8(®s->wkup_ival) >> (7 - gpio)) & 1; + + pr_debug("%s: gpio: %d ret: %d\n", __func__, gpio, ret); + + return ret; +} + +static inline void +__mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + + if (val) + chip->shadow_dvo |= 1 << (7 - gpio); + else + chip->shadow_dvo &= ~(1 << (7 - gpio)); + + out_8(®s->wkup_dvo, chip->shadow_dvo); +} + +static void +mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_wkup_gpio_set(gc, gpio, val); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); +} + +static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* set the direction */ + chip->shadow_ddr &= ~(1 << (7 - gpio)); + out_8(®s->wkup_ddr, chip->shadow_ddr); + + /* and enable the pin */ + chip->shadow_gpioe |= 1 << (7 - gpio); + out_8(®s->wkup_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +static int +mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_wkup_gpio_set(gc, gpio, val); + + /* Then set direction */ + chip->shadow_ddr |= 1 << (7 - gpio); + out_8(®s->wkup_ddr, chip->shadow_ddr); + + /* Finally enable the pin */ + chip->shadow_gpioe |= 1 << (7 - gpio); + out_8(®s->wkup_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); + + return 0; +} + +static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev) +{ + struct mpc52xx_gpiochip *chip; + struct mpc52xx_gpio_wkup __iomem *regs; + struct gpio_chip *gc; + int ret; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + gc = &chip->mmchip.gc; + + gc->ngpio = 8; + gc->direction_input = mpc52xx_wkup_gpio_dir_in; + gc->direction_output = mpc52xx_wkup_gpio_dir_out; + gc->get = mpc52xx_wkup_gpio_get; + gc->set = mpc52xx_wkup_gpio_set; + + ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip); + if (ret) + return ret; + + regs = chip->mmchip.regs; + chip->shadow_gpioe = in_8(®s->wkup_gpioe); + chip->shadow_ddr = in_8(®s->wkup_ddr); + chip->shadow_dvo = in_8(®s->wkup_dvo); + + return 0; +} + +static int mpc52xx_gpiochip_remove(struct platform_device *ofdev) +{ + return -EBUSY; +} + +static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = { + { .compatible = "fsl,mpc5200-gpio-wkup", }, + {} +}; + +static struct platform_driver mpc52xx_wkup_gpiochip_driver = { + .driver = { + .name = "mpc5200-gpio-wkup", + .owner = THIS_MODULE, + .of_match_table = mpc52xx_wkup_gpiochip_match, + }, + .probe = mpc52xx_wkup_gpiochip_probe, + .remove = mpc52xx_gpiochip_remove, +}; + +/* + * GPIO LIB API implementation for simple GPIOs + * + * There's a maximum of 32 simple GPIOs. Which of these are available + * for use depends on your board setup. + * The numbering reflects the bit numbering in the port registers: + * + * 0..1 > reserved + * 2..3 > IRDA + * 4..7 > ETHR + * 8..11 > reserved + * 12..15 > USB + * 16..17 > reserved + * 18..23 > PSC3 + * 24..27 > PSC2 + * 28..31 > PSC1 + */ +static int mpc52xx_simple_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + unsigned int ret; + + ret = (in_be32(®s->simple_ival) >> (31 - gpio)) & 1; + + return ret; +} + +static inline void +__mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + + if (val) + chip->shadow_dvo |= 1 << (31 - gpio); + else + chip->shadow_dvo &= ~(1 << (31 - gpio)); + out_be32(®s->simple_dvo, chip->shadow_dvo); +} + +static void +mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_simple_gpio_set(gc, gpio, val); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); +} + +static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* set the direction */ + chip->shadow_ddr &= ~(1 << (31 - gpio)); + out_be32(®s->simple_ddr, chip->shadow_ddr); + + /* and enable the pin */ + chip->shadow_gpioe |= 1 << (31 - gpio); + out_be32(®s->simple_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +static int +mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* First set initial value */ + __mpc52xx_simple_gpio_set(gc, gpio, val); + + /* Then set direction */ + chip->shadow_ddr |= 1 << (31 - gpio); + out_be32(®s->simple_ddr, chip->shadow_ddr); + + /* Finally enable the pin */ + chip->shadow_gpioe |= 1 << (31 - gpio); + out_be32(®s->simple_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); + + return 0; +} + +static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev) +{ + struct mpc52xx_gpiochip *chip; + struct gpio_chip *gc; + struct mpc52xx_gpio __iomem *regs; + int ret; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + gc = &chip->mmchip.gc; + + gc->ngpio = 32; + gc->direction_input = mpc52xx_simple_gpio_dir_in; + gc->direction_output = mpc52xx_simple_gpio_dir_out; + gc->get = mpc52xx_simple_gpio_get; + gc->set = mpc52xx_simple_gpio_set; + + ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip); + if (ret) + return ret; + + regs = chip->mmchip.regs; + chip->shadow_gpioe = in_be32(®s->simple_gpioe); + chip->shadow_ddr = in_be32(®s->simple_ddr); + chip->shadow_dvo = in_be32(®s->simple_dvo); + + return 0; +} + +static const struct of_device_id mpc52xx_simple_gpiochip_match[] = { + { .compatible = "fsl,mpc5200-gpio", }, + {} +}; + +static struct platform_driver mpc52xx_simple_gpiochip_driver = { + .driver = { + .name = "mpc5200-gpio", + .owner = THIS_MODULE, + .of_match_table = mpc52xx_simple_gpiochip_match, + }, + .probe = mpc52xx_simple_gpiochip_probe, + .remove = mpc52xx_gpiochip_remove, +}; + +static int __init mpc52xx_gpio_init(void) +{ + if (platform_driver_register(&mpc52xx_wkup_gpiochip_driver)) + printk(KERN_ERR "Unable to register wakeup GPIO driver\n"); + + if (platform_driver_register(&mpc52xx_simple_gpiochip_driver)) + printk(KERN_ERR "Unable to register simple GPIO driver\n"); + + return 0; +} + + +/* Make sure we get initialised before anyone else tries to use us */ +subsys_initcall(mpc52xx_gpio_init); + +/* No exit call at the moment as we cannot unregister of gpio chips */ + +MODULE_DESCRIPTION("Freescale MPC52xx gpio driver"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c new file mode 100644 index 000000000000..4340acae3bd3 --- /dev/null +++ b/drivers/gpio/gpio-mxc.c @@ -0,0 +1,460 @@ +/* + * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * Based on code from Freescale, + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/basic_mmio_gpio.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <asm-generic/bug.h> + +enum mxc_gpio_hwtype { + IMX1_GPIO, /* runs on i.mx1 */ + IMX21_GPIO, /* runs on i.mx21 and i.mx27 */ + IMX31_GPIO, /* runs on all other i.mx */ +}; + +/* device type dependent stuff */ +struct mxc_gpio_hwdata { + unsigned dr_reg; + unsigned gdir_reg; + unsigned psr_reg; + unsigned icr1_reg; + unsigned icr2_reg; + unsigned imr_reg; + unsigned isr_reg; + unsigned low_level; + unsigned high_level; + unsigned rise_edge; + unsigned fall_edge; +}; + +struct mxc_gpio_port { + struct list_head node; + void __iomem *base; + int irq; + int irq_high; + int virtual_irq_start; + struct bgpio_chip bgc; + u32 both_edges; +}; + +static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = { + .dr_reg = 0x1c, + .gdir_reg = 0x00, + .psr_reg = 0x24, + .icr1_reg = 0x28, + .icr2_reg = 0x2c, + .imr_reg = 0x30, + .isr_reg = 0x34, + .low_level = 0x03, + .high_level = 0x02, + .rise_edge = 0x00, + .fall_edge = 0x01, +}; + +static struct mxc_gpio_hwdata imx31_gpio_hwdata = { + .dr_reg = 0x00, + .gdir_reg = 0x04, + .psr_reg = 0x08, + .icr1_reg = 0x0c, + .icr2_reg = 0x10, + .imr_reg = 0x14, + .isr_reg = 0x18, + .low_level = 0x00, + .high_level = 0x01, + .rise_edge = 0x02, + .fall_edge = 0x03, +}; + +static enum mxc_gpio_hwtype mxc_gpio_hwtype; +static struct mxc_gpio_hwdata *mxc_gpio_hwdata; + +#define GPIO_DR (mxc_gpio_hwdata->dr_reg) +#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg) +#define GPIO_PSR (mxc_gpio_hwdata->psr_reg) +#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg) +#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg) +#define GPIO_IMR (mxc_gpio_hwdata->imr_reg) +#define GPIO_ISR (mxc_gpio_hwdata->isr_reg) + +#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level) +#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level) +#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge) +#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge) +#define GPIO_INT_NONE 0x4 + +static struct platform_device_id mxc_gpio_devtype[] = { + { + .name = "imx1-gpio", + .driver_data = IMX1_GPIO, + }, { + .name = "imx21-gpio", + .driver_data = IMX21_GPIO, + }, { + .name = "imx31-gpio", + .driver_data = IMX31_GPIO, + }, { + /* sentinel */ + } +}; + +static const struct of_device_id mxc_gpio_dt_ids[] = { + { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], }, + { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], }, + { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], }, + { /* sentinel */ } +}; + +/* + * MX2 has one interrupt *for all* gpio ports. The list is used + * to save the references to all ports, so that mx2_gpio_irq_handler + * can walk through all interrupt status registers. + */ +static LIST_HEAD(mxc_gpio_ports); + +/* Note: This driver assumes 32 GPIOs are handled in one register */ + +static int gpio_set_irq_type(struct irq_data *d, u32 type) +{ + u32 gpio = irq_to_gpio(d->irq); + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mxc_gpio_port *port = gc->private; + u32 bit, val; + int edge; + void __iomem *reg = port->base; + + port->both_edges &= ~(1 << (gpio & 31)); + switch (type) { + case IRQ_TYPE_EDGE_RISING: + edge = GPIO_INT_RISE_EDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + edge = GPIO_INT_FALL_EDGE; + break; + case IRQ_TYPE_EDGE_BOTH: + val = gpio_get_value(gpio); + if (val) { + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: set GPIO %d to low trigger\n", gpio); + } else { + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: set GPIO %d to high trigger\n", gpio); + } + port->both_edges |= 1 << (gpio & 31); + break; + case IRQ_TYPE_LEVEL_LOW: + edge = GPIO_INT_LOW_LEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + edge = GPIO_INT_HIGH_LEV; + break; + default: + return -EINVAL; + } + + reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ + bit = gpio & 0xf; + val = readl(reg) & ~(0x3 << (bit << 1)); + writel(val | (edge << (bit << 1)), reg); + writel(1 << (gpio & 0x1f), port->base + GPIO_ISR); + + return 0; +} + +static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) +{ + void __iomem *reg = port->base; + u32 bit, val; + int edge; + + reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ + bit = gpio & 0xf; + val = readl(reg); + edge = (val >> (bit << 1)) & 3; + val &= ~(0x3 << (bit << 1)); + if (edge == GPIO_INT_HIGH_LEV) { + edge = GPIO_INT_LOW_LEV; + pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); + } else if (edge == GPIO_INT_LOW_LEV) { + edge = GPIO_INT_HIGH_LEV; + pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); + } else { + pr_err("mxc: invalid configuration for GPIO %d: %x\n", + gpio, edge); + return; + } + writel(val | (edge << (bit << 1)), reg); +} + +/* handle 32 interrupts in one status register */ +static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) +{ + u32 gpio_irq_no_base = port->virtual_irq_start; + + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; + + if (port->both_edges & (1 << irqoffset)) + mxc_flip_edge(port, irqoffset); + + generic_handle_irq(gpio_irq_no_base + irqoffset); + + irq_stat &= ~(1 << irqoffset); + } +} + +/* MX1 and MX3 has one interrupt *per* gpio port */ +static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 irq_stat; + struct mxc_gpio_port *port = irq_get_handler_data(irq); + + irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR); + + mxc_gpio_irq_handler(port, irq_stat); +} + +/* MX2 has one interrupt *for all* gpio ports */ +static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 irq_msk, irq_stat; + struct mxc_gpio_port *port; + + /* walk through all interrupt status registers */ + list_for_each_entry(port, &mxc_gpio_ports, node) { + irq_msk = readl(port->base + GPIO_IMR); + if (!irq_msk) + continue; + + irq_stat = readl(port->base + GPIO_ISR) & irq_msk; + if (irq_stat) + mxc_gpio_irq_handler(port, irq_stat); + } +} + +/* + * Set interrupt number "irq" in the GPIO as a wake-up source. + * While system is running, all registered GPIO interrupts need to have + * wake-up enabled. When system is suspended, only selected GPIO interrupts + * need to have wake-up enabled. + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * @return This function returns 0 on success. + */ +static int gpio_set_wake_irq(struct irq_data *d, u32 enable) +{ + u32 gpio = irq_to_gpio(d->irq); + u32 gpio_idx = gpio & 0x1F; + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mxc_gpio_port *port = gc->private; + + if (enable) { + if (port->irq_high && (gpio_idx >= 16)) + enable_irq_wake(port->irq_high); + else + enable_irq_wake(port->irq); + } else { + if (port->irq_high && (gpio_idx >= 16)) + disable_irq_wake(port->irq_high); + else + disable_irq_wake(port->irq); + } + + return 0; +} + +static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("gpio-mxc", 1, port->virtual_irq_start, + port->base, handle_level_irq); + gc->private = port; + + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_set_type = gpio_set_irq_type; + ct->chip.irq_set_wake = gpio_set_wake_irq; + ct->regs.ack = GPIO_ISR; + ct->regs.mask = GPIO_IMR; + + irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK, + IRQ_NOREQUEST, 0); +} + +static void __devinit mxc_gpio_get_hw(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(mxc_gpio_dt_ids, &pdev->dev); + enum mxc_gpio_hwtype hwtype; + + if (of_id) + pdev->id_entry = of_id->data; + hwtype = pdev->id_entry->driver_data; + + if (mxc_gpio_hwtype) { + /* + * The driver works with a reasonable presupposition, + * that is all gpio ports must be the same type when + * running on one soc. + */ + BUG_ON(mxc_gpio_hwtype != hwtype); + return; + } + + if (hwtype == IMX31_GPIO) + mxc_gpio_hwdata = &imx31_gpio_hwdata; + else + mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata; + + mxc_gpio_hwtype = hwtype; +} + +static int __devinit mxc_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mxc_gpio_port *port; + struct resource *iores; + int err; + + mxc_gpio_get_hw(pdev); + + port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iores) { + err = -ENODEV; + goto out_kfree; + } + + if (!request_mem_region(iores->start, resource_size(iores), + pdev->name)) { + err = -EBUSY; + goto out_kfree; + } + + port->base = ioremap(iores->start, resource_size(iores)); + if (!port->base) { + err = -ENOMEM; + goto out_release_mem; + } + + port->irq_high = platform_get_irq(pdev, 1); + port->irq = platform_get_irq(pdev, 0); + if (port->irq < 0) { + err = -EINVAL; + goto out_iounmap; + } + + /* disable the interrupt and clear the status */ + writel(0, port->base + GPIO_IMR); + writel(~0, port->base + GPIO_ISR); + + if (mxc_gpio_hwtype == IMX21_GPIO) { + /* setup one handler for all GPIO interrupts */ + if (pdev->id == 0) + irq_set_chained_handler(port->irq, + mx2_gpio_irq_handler); + } else { + /* setup one handler for each entry */ + irq_set_chained_handler(port->irq, mx3_gpio_irq_handler); + irq_set_handler_data(port->irq, port); + if (port->irq_high > 0) { + /* setup handler for GPIO 16 to 31 */ + irq_set_chained_handler(port->irq_high, + mx3_gpio_irq_handler); + irq_set_handler_data(port->irq_high, port); + } + } + + err = bgpio_init(&port->bgc, &pdev->dev, 4, + port->base + GPIO_PSR, + port->base + GPIO_DR, NULL, + port->base + GPIO_GDIR, NULL, false); + if (err) + goto out_iounmap; + + port->bgc.gc.base = pdev->id * 32; + port->bgc.dir = port->bgc.read_reg(port->bgc.reg_dir); + port->bgc.data = port->bgc.read_reg(port->bgc.reg_set); + + err = gpiochip_add(&port->bgc.gc); + if (err) + goto out_bgpio_remove; + + /* + * In dt case, we use gpio number range dynamically + * allocated by gpio core. + */ + port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base : + pdev->id * 32); + + /* gpio-mxc can be a generic irq chip */ + mxc_gpio_init_gc(port); + + list_add_tail(&port->node, &mxc_gpio_ports); + + return 0; + +out_bgpio_remove: + bgpio_remove(&port->bgc); +out_iounmap: + iounmap(port->base); +out_release_mem: + release_mem_region(iores->start, resource_size(iores)); +out_kfree: + kfree(port); + dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err); + return err; +} + +static struct platform_driver mxc_gpio_driver = { + .driver = { + .name = "gpio-mxc", + .owner = THIS_MODULE, + .of_match_table = mxc_gpio_dt_ids, + }, + .probe = mxc_gpio_probe, + .id_table = mxc_gpio_devtype, +}; + +static int __init gpio_mxc_init(void) +{ + return platform_driver_register(&mxc_gpio_driver); +} +postcore_initcall(gpio_mxc_init); + +MODULE_AUTHOR("Freescale Semiconductor, " + "Daniel Mack <danielncaiaq.de>, " + "Juergen Beisert <kernel@pengutronix.de>"); +MODULE_DESCRIPTION("Freescale MXC GPIO"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c new file mode 100644 index 000000000000..af55a8577c2e --- /dev/null +++ b/drivers/gpio/gpio-mxs.c @@ -0,0 +1,289 @@ +/* + * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * Based on code from Freescale, + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/basic_mmio_gpio.h> +#include <mach/mxs.h> + +#define MXS_SET 0x4 +#define MXS_CLR 0x8 + +#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) +#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) +#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) +#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) +#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) +#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) +#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) +#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) + +#define GPIO_INT_FALL_EDGE 0x0 +#define GPIO_INT_LOW_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_HIGH_LEV 0x3 +#define GPIO_INT_LEV_MASK (1 << 0) +#define GPIO_INT_POL_MASK (1 << 1) + +struct mxs_gpio_port { + void __iomem *base; + int id; + int irq; + int virtual_irq_start; + struct bgpio_chip bgc; +}; + +/* Note: This driver assumes 32 GPIOs are handled in one register */ + +static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) +{ + u32 gpio = irq_to_gpio(d->irq); + u32 pin_mask = 1 << (gpio & 31); + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mxs_gpio_port *port = gc->private; + void __iomem *pin_addr; + int edge; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + edge = GPIO_INT_RISE_EDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + edge = GPIO_INT_FALL_EDGE; + break; + case IRQ_TYPE_LEVEL_LOW: + edge = GPIO_INT_LOW_LEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + edge = GPIO_INT_HIGH_LEV; + break; + default: + return -EINVAL; + } + + /* set level or edge */ + pin_addr = port->base + PINCTRL_IRQLEV(port->id); + if (edge & GPIO_INT_LEV_MASK) + writel(pin_mask, pin_addr + MXS_SET); + else + writel(pin_mask, pin_addr + MXS_CLR); + + /* set polarity */ + pin_addr = port->base + PINCTRL_IRQPOL(port->id); + if (edge & GPIO_INT_POL_MASK) + writel(pin_mask, pin_addr + MXS_SET); + else + writel(pin_mask, pin_addr + MXS_CLR); + + writel(1 << (gpio & 0x1f), + port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR); + + return 0; +} + +/* MXS has one interrupt *per* gpio port */ +static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 irq_stat; + struct mxs_gpio_port *port = irq_get_handler_data(irq); + u32 gpio_irq_no_base = port->virtual_irq_start; + + desc->irq_data.chip->irq_ack(&desc->irq_data); + + irq_stat = readl(port->base + PINCTRL_IRQSTAT(port->id)) & + readl(port->base + PINCTRL_IRQEN(port->id)); + + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; + generic_handle_irq(gpio_irq_no_base + irqoffset); + irq_stat &= ~(1 << irqoffset); + } +} + +/* + * Set interrupt number "irq" in the GPIO as a wake-up source. + * While system is running, all registered GPIO interrupts need to have + * wake-up enabled. When system is suspended, only selected GPIO interrupts + * need to have wake-up enabled. + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * @return This function returns 0 on success. + */ +static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct mxs_gpio_port *port = gc->private; + + if (enable) + enable_irq_wake(port->irq); + else + disable_irq_wake(port->irq); + + return 0; +} + +static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("gpio-mxs", 1, port->virtual_irq_start, + port->base, handle_level_irq); + gc->private = port; + + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_set_type = mxs_gpio_set_irq_type; + ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; + ct->regs.ack = PINCTRL_IRQSTAT(port->id) + MXS_CLR; + ct->regs.mask = PINCTRL_IRQEN(port->id); + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); +} + +static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct bgpio_chip *bgc = to_bgpio_chip(gc); + struct mxs_gpio_port *port = + container_of(bgc, struct mxs_gpio_port, bgc); + + return port->virtual_irq_start + offset; +} + +static int __devinit mxs_gpio_probe(struct platform_device *pdev) +{ + static void __iomem *base; + struct mxs_gpio_port *port; + struct resource *iores = NULL; + int err; + + port = kzalloc(sizeof(struct mxs_gpio_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->id = pdev->id; + port->virtual_irq_start = MXS_GPIO_IRQ_START + port->id * 32; + + /* + * map memory region only once, as all the gpio ports + * share the same one + */ + if (!base) { + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iores) { + err = -ENODEV; + goto out_kfree; + } + + if (!request_mem_region(iores->start, resource_size(iores), + pdev->name)) { + err = -EBUSY; + goto out_kfree; + } + + base = ioremap(iores->start, resource_size(iores)); + if (!base) { + err = -ENOMEM; + goto out_release_mem; + } + } + port->base = base; + + port->irq = platform_get_irq(pdev, 0); + if (port->irq < 0) { + err = -EINVAL; + goto out_iounmap; + } + + /* + * select the pin interrupt functionality but initially + * disable the interrupts + */ + writel(~0U, port->base + PINCTRL_PIN2IRQ(port->id)); + writel(0, port->base + PINCTRL_IRQEN(port->id)); + + /* clear address has to be used to clear IRQSTAT bits */ + writel(~0U, port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR); + + /* gpio-mxs can be a generic irq chip */ + mxs_gpio_init_gc(port); + + /* setup one handler for each entry */ + irq_set_chained_handler(port->irq, mxs_gpio_irq_handler); + irq_set_handler_data(port->irq, port); + + err = bgpio_init(&port->bgc, &pdev->dev, 4, + port->base + PINCTRL_DIN(port->id), + port->base + PINCTRL_DOUT(port->id), NULL, + port->base + PINCTRL_DOE(port->id), NULL, false); + if (err) + goto out_iounmap; + + port->bgc.gc.to_irq = mxs_gpio_to_irq; + port->bgc.gc.base = port->id * 32; + + err = gpiochip_add(&port->bgc.gc); + if (err) + goto out_bgpio_remove; + + return 0; + +out_bgpio_remove: + bgpio_remove(&port->bgc); +out_iounmap: + if (iores) + iounmap(port->base); +out_release_mem: + if (iores) + release_mem_region(iores->start, resource_size(iores)); +out_kfree: + kfree(port); + dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err); + return err; +} + +static struct platform_driver mxs_gpio_driver = { + .driver = { + .name = "gpio-mxs", + .owner = THIS_MODULE, + }, + .probe = mxs_gpio_probe, +}; + +static int __init mxs_gpio_init(void) +{ + return platform_driver_register(&mxs_gpio_driver); +} +postcore_initcall(mxs_gpio_init); + +MODULE_AUTHOR("Freescale Semiconductor, " + "Daniel Mack <danielncaiaq.de>, " + "Juergen Beisert <kernel@pengutronix.de>"); +MODULE_DESCRIPTION("Freescale MXS GPIO"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c index 4961ef9bc153..2c212c732d76 100644 --- a/drivers/gpio/gpio-nomadik.c +++ b/drivers/gpio/gpio-nomadik.c @@ -4,6 +4,7 @@ * Copyright (C) 2008,2009 STMicroelectronics * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -49,6 +50,7 @@ struct nmk_gpio_chip { u32 (*get_secondary_status)(unsigned int bank); void (*set_ioforce)(bool enable); spinlock_t lock; + bool sleepmode; /* Keep track of configured edges */ u32 edge_rising; u32 edge_falling; @@ -393,14 +395,25 @@ EXPORT_SYMBOL(nmk_config_pins_sleep); * @gpio: pin number * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, * - * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is - * changed to an input (with pullup/down enabled) in sleep and deep sleep. If - * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was - * configured even when in sleep and deep sleep. + * This register is actually in the pinmux layer, not the GPIO block itself. + * The GPIO1B_SLPM register defines the GPIO mode when SLEEP/DEEP-SLEEP + * mode is entered (i.e. when signal IOFORCE is HIGH by the platform code). + * Each GPIO can be configured to be forced into GPIO mode when IOFORCE is + * HIGH, overriding the normal setting defined by GPIO_AFSELx registers. + * When IOFORCE returns LOW (by software, after SLEEP/DEEP-SLEEP exit), + * the GPIOs return to the normal setting defined by GPIO_AFSELx registers. * - * On DB8500v2 onwards, this setting loses the previous meaning and instead - * indicates if wakeup detection is enabled on the pin. Note that - * enable_irq_wake() will automatically enable wakeup detection. + * If @mode is NMK_GPIO_SLPM_INPUT, the corresponding GPIO is switched to GPIO + * mode when signal IOFORCE is HIGH (i.e. when SLEEP/DEEP-SLEEP mode is + * entered) regardless of the altfunction selected. Also wake-up detection is + * ENABLED. + * + * If @mode is NMK_GPIO_SLPM_NOCHANGE, the corresponding GPIO remains + * controlled by NMK_GPIO_DATC, NMK_GPIO_DATS, NMK_GPIO_DIR, NMK_GPIO_PDIS + * (for altfunction GPIO) or respective on-chip peripherals (for other + * altfuncs) when IOFORCE is HIGH. Also wake-up detection DISABLED. + * + * Note that enable_irq_wake() will automatically enable wakeup detection. */ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) { @@ -551,6 +564,12 @@ static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, int gpio, bool on) { + if (nmk_chip->sleepmode) { + __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, + on ? NMK_GPIO_SLPM_WAKEUP_ENABLE + : NMK_GPIO_SLPM_WAKEUP_DISABLE); + } + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); } @@ -901,7 +920,7 @@ void nmk_gpio_wakeups_suspend(void) writel(chip->fwimsc & chip->real_wake, chip->addr + NMK_GPIO_FWIMSC); - if (cpu_is_u8500v2()) { + if (chip->sleepmode) { chip->slpm = readl(chip->addr + NMK_GPIO_SLPC); /* 0 -> wakeup enable */ @@ -923,7 +942,7 @@ void nmk_gpio_wakeups_resume(void) writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC); writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC); - if (cpu_is_u8500v2()) + if (chip->sleepmode) writel(chip->slpm, chip->addr + NMK_GPIO_SLPC); } } @@ -1010,6 +1029,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) nmk_chip->secondary_parent_irq = secondary_irq; nmk_chip->get_secondary_status = pdata->get_secondary_status; nmk_chip->set_ioforce = pdata->set_ioforce; + nmk_chip->sleepmode = pdata->supports_sleepmode; spin_lock_init(&nmk_chip->lock); chip = &nmk_chip->chip; @@ -1065,5 +1085,3 @@ core_initcall(nmk_gpio_init); MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); MODULE_DESCRIPTION("Nomadik GPIO Driver"); MODULE_LICENSE("GPL"); - - diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 6c51191da567..0599854e2217 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -54,6 +54,11 @@ struct gpio_bank { struct device *dev; bool dbck_flag; int stride; + u32 width; + + void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable); + + struct omap_gpio_reg_offs *regs; }; #ifdef CONFIG_ARCH_OMAP3 @@ -79,121 +84,18 @@ static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; */ static struct gpio_bank *gpio_bank; -static int bank_width; - /* TODO: Analyze removing gpio_bank_count usage from driver code */ int gpio_bank_count; -static inline struct gpio_bank *get_gpio_bank(int gpio) -{ - if (cpu_is_omap15xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1]; - } - if (cpu_is_omap16xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 4)]; - } - if (cpu_is_omap7xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 5)]; - } - if (cpu_is_omap24xx()) - return &gpio_bank[gpio >> 5]; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return &gpio_bank[gpio >> 5]; - BUG(); - return NULL; -} - -static inline int get_gpio_index(int gpio) -{ - if (cpu_is_omap7xx()) - return gpio & 0x1f; - if (cpu_is_omap24xx()) - return gpio & 0x1f; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return gpio & 0x1f; - return gpio & 0x0f; -} - -static inline int gpio_valid(int gpio) -{ - if (gpio < 0) - return -1; - if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { - if (gpio >= OMAP_MAX_GPIO_LINES + 16) - return -1; - return 0; - } - if (cpu_is_omap15xx() && gpio < 16) - return 0; - if ((cpu_is_omap16xx()) && gpio < 64) - return 0; - if (cpu_is_omap7xx() && gpio < 192) - return 0; - if (cpu_is_omap2420() && gpio < 128) - return 0; - if (cpu_is_omap2430() && gpio < 160) - return 0; - if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) - return 0; - return -1; -} - -static int check_gpio(int gpio) -{ - if (unlikely(gpio_valid(gpio) < 0)) { - printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); - dump_stack(); - return -1; - } - return 0; -} +#define GPIO_INDEX(bank, gpio) (gpio % bank->width) +#define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio)) static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { void __iomem *reg = bank->base; u32 l; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; -#endif - default: - WARN_ON(1); - return; - } + reg += bank->regs->direction; l = __raw_readl(reg); if (is_input) l |= 1 << gpio; @@ -202,165 +104,48 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) __raw_writel(l, reg); } -static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) + +/* set data out value using dedicate set/clear register */ +static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable) { void __iomem *reg = bank->base; - u32 l = 0; + u32 l = GPIO_BIT(bank, gpio); + + if (enable) + reg += bank->regs->set_dataout; + else + reg += bank->regs->clr_dataout; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT / bank->stride; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_DATAOUT; - else - reg += OMAP1610_GPIO_CLEAR_DATAOUT; - l = 1 << gpio; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETDATAOUT; - else - reg += OMAP24XX_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_SETDATAOUT; - else - reg += OMAP4_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif - default: - WARN_ON(1); - return; - } __raw_writel(l, reg); } -static int _get_gpio_datain(struct gpio_bank *bank, int gpio) +/* set data out value using mask register */ +static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable) { - void __iomem *reg; + void __iomem *reg = bank->base + bank->regs->dataout; + u32 gpio_bit = GPIO_BIT(bank, gpio); + u32 l; - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_INPUT_LATCH / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAIN; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_INPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAIN; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAIN; - break; -#endif - default: - return -EINVAL; - } - return (__raw_readl(reg) - & (1 << get_gpio_index(gpio))) != 0; + l = __raw_readl(reg); + if (enable) + l |= gpio_bit; + else + l &= ~gpio_bit; + __raw_writel(l, reg); } -static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +static int _get_gpio_datain(struct gpio_bank *bank, int gpio) { - void __iomem *reg; + void __iomem *reg = bank->base + bank->regs->datain; - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; + return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0; +} - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAOUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAOUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAOUT; - break; -#endif - default: - return -EINVAL; - } +static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg = bank->base + bank->regs->dataout; - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; + return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0; } #define MOD_REG_BIT(reg, bit_mask, set) \ @@ -383,7 +168,7 @@ do { \ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, unsigned debounce) { - void __iomem *reg = bank->base; + void __iomem *reg; u32 val; u32 l; @@ -397,21 +182,12 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, else debounce = (debounce / 0x1f) - 1; - l = 1 << get_gpio_index(gpio); - - if (bank->method == METHOD_GPIO_44XX) - reg += OMAP4_GPIO_DEBOUNCINGTIME; - else - reg += OMAP24XX_GPIO_DEBOUNCE_VAL; + l = GPIO_BIT(bank, gpio); + reg = bank->base + bank->regs->debounce; __raw_writel(debounce, reg); - reg = bank->base; - if (bank->method == METHOD_GPIO_44XX) - reg += OMAP4_GPIO_DEBOUNCENABLE; - else - reg += OMAP24XX_GPIO_DEBOUNCE_EN; - + reg = bank->base + bank->regs->debounce_en; val = __raw_readl(reg); if (debounce) { @@ -432,7 +208,6 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; - u32 val; if (cpu_is_omap44xx()) { MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, @@ -455,15 +230,8 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, } if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (cpu_is_omap44xx()) { - if (trigger != 0) - __raw_writel(1 << gpio, bank->base+ - OMAP4_GPIO_IRQWAKEN0); - else { - val = __raw_readl(bank->base + - OMAP4_GPIO_IRQWAKEN0); - __raw_writel(val & (~(1 << gpio)), bank->base + - OMAP4_GPIO_IRQWAKEN0); - } + MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit, + trigger != 0); } else { /* * GPIO wakeup request can only be generated on edge @@ -477,8 +245,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, + OMAP24XX_GPIO_CLEARWKUENA); } } - /* This part needs to be executed always for OMAP34xx */ - if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { + /* This part needs to be executed always for OMAP{34xx, 44xx} */ + if (cpu_is_omap34xx() || cpu_is_omap44xx() || + (bank->non_wakeup_gpios & gpio_bit)) { /* * Log the edge gpio and manually trigger the IRQ * after resume if the input level changes @@ -636,9 +405,6 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) else gpio = d->irq - IH_GPIO_BASE; - if (check_gpio(gpio) < 0) - return -EINVAL; - if (type & ~IRQ_TYPE_SENSE_MASK) return -EINVAL; @@ -649,7 +415,7 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) bank = irq_data_get_irq_chip_data(d); spin_lock_irqsave(&bank->lock, flags); - retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); + retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type); spin_unlock_irqrestore(&bank->lock, flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) @@ -664,195 +430,81 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) { void __iomem *reg = bank->base; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - /* MPUIO irqstatus is reset by reading the status register, - * so do nothing here */ - return; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_STATUS; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUS0; - break; -#endif - default: - WARN_ON(1); - return; - } + reg += bank->regs->irqstatus; __raw_writel(gpio_mask, reg); /* Workaround for clearing DSP GPIO interrupts to allow retention */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; - else if (cpu_is_omap44xx()) - reg = bank->base + OMAP4_GPIO_IRQSTATUS1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (bank->regs->irqstatus2) { + reg = bank->base + bank->regs->irqstatus2; __raw_writel(gpio_mask, reg); + } /* Flush posted write for the irq status to avoid spurious interrupts */ __raw_readl(reg); - } } static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) { - _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio)); + _clear_gpio_irqbank(bank, GPIO_BIT(bank, gpio)); } static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) { void __iomem *reg = bank->base; - int inv = 0; u32 l; - u32 mask; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQENABLE1; - mask = 0xffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQENABLE1; - mask = 0xffffffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUSSET0; - mask = 0xffffffff; - break; -#endif - default: - WARN_ON(1); - return 0; - } + u32 mask = (1 << bank->width) - 1; + reg += bank->regs->irqenable; l = __raw_readl(reg); - if (inv) + if (bank->regs->irqenable_inv) l = ~l; l &= mask; return l; } -static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) +static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) { void __iomem *reg = bank->base; u32 l; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; + if (bank->regs->set_irqenable) { + reg += bank->regs->set_irqenable; + l = gpio_mask; + } else { + reg += bank->regs->irqenable; l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); + if (bank->regs->irqenable_inv) + l &= ~gpio_mask; else l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_IRQENABLE1; - else - reg += OMAP1610_GPIO_CLEAR_IRQENABLE1; + } + + __raw_writel(l, reg); +} + +static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) +{ + void __iomem *reg = bank->base; + u32 l; + + if (bank->regs->clr_irqenable) { + reg += bank->regs->clr_irqenable; l = gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; + } else { + reg += bank->regs->irqenable; l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else + if (bank->regs->irqenable_inv) l |= gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETIRQENABLE1; - else - reg += OMAP24XX_GPIO_CLEARIRQENABLE1; - l = gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_IRQSTATUSSET0; else - reg += OMAP4_GPIO_IRQSTATUSCLR0; - l = gpio_mask; - break; -#endif - default: - WARN_ON(1); - return; + l &= ~gpio_mask; } + __raw_writel(l, reg); } static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) { - _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); + _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio)); } /* @@ -865,50 +517,32 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena */ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) { - unsigned long uninitialized_var(flags); + u32 gpio_bit = GPIO_BIT(bank, gpio); + unsigned long flags; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_MPUIO: - case METHOD_GPIO_1610: - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - if (bank->non_wakeup_gpios & (1 << gpio)) { - printk(KERN_ERR "Unable to modify wakeup on " - "non-wakeup GPIO%d\n", - (bank - gpio_bank) * 32 + gpio); - return -EINVAL; - } - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif - default: - printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", - bank->method); + if (bank->non_wakeup_gpios & gpio_bit) { + dev_err(bank->dev, + "Unable to modify wakeup on non-wakeup GPIO%d\n", gpio); return -EINVAL; } + + spin_lock_irqsave(&bank->lock, flags); + if (enable) + bank->suspend_wakeup |= gpio_bit; + else + bank->suspend_wakeup &= ~gpio_bit; + + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; } static void _reset_gpio(struct gpio_bank *bank, int gpio) { - _set_gpio_direction(bank, get_gpio_index(gpio), 1); + _set_gpio_direction(bank, GPIO_INDEX(bank, gpio), 1); _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); + _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ @@ -918,10 +552,8 @@ static int gpio_wake_enable(struct irq_data *d, unsigned int enable) struct gpio_bank *bank; int retval; - if (check_gpio(gpio) < 0) - return -ENODEV; bank = irq_data_get_irq_chip_data(d); - retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); + retval = _set_gpio_wakeup(bank, gpio, enable); return retval; } @@ -1037,31 +669,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); bank = irq_get_handler_data(irq); -#ifdef CONFIG_ARCH_OMAP1 - if (bank->method == METHOD_MPUIO) - isr_reg = bank->base + - OMAP_MPUIO_GPIO_INT / bank->stride; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) - isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (bank->method == METHOD_GPIO_1610) - isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (bank->method == METHOD_GPIO_7XX) - isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) - isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP4) - if (bank->method == METHOD_GPIO_44XX) - isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; -#endif + isr_reg = bank->base + bank->regs->irqstatus; if (WARN_ON(!isr_reg)) goto exit; @@ -1083,9 +691,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) /* clear edge sensitive interrupts before handler(s) are called so that we don't miss any interrupt occurred while executing them */ - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); + _disable_gpio_irqbank(bank, isr_saved & ~level_mask); _clear_gpio_irqbank(bank, isr_saved & ~level_mask); - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); + _enable_gpio_irqbank(bank, isr_saved & ~level_mask); /* if there is only edge sensitive GPIO pin interrupts configured, we could unmask GPIO bank interrupt immediately */ @@ -1101,7 +709,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) gpio_irq = bank->virtual_irq_start; for (; isr != 0; isr >>= 1, gpio_irq++) { - gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); + gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq)); if (!(isr & 1)) continue; @@ -1134,8 +742,11 @@ static void gpio_irq_shutdown(struct irq_data *d) { unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned long flags; + spin_lock_irqsave(&bank->lock, flags); _reset_gpio(bank, gpio); + spin_unlock_irqrestore(&bank->lock, flags); } static void gpio_ack_irq(struct irq_data *d) @@ -1150,20 +761,25 @@ static void gpio_mask_irq(struct irq_data *d) { unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned long flags; + spin_lock_irqsave(&bank->lock, flags); _set_gpio_irqenable(bank, gpio, 0); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); + _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); + spin_unlock_irqrestore(&bank->lock, flags); } static void gpio_unmask_irq(struct irq_data *d) { unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - unsigned int irq_mask = 1 << get_gpio_index(gpio); + unsigned int irq_mask = GPIO_BIT(bank, gpio); u32 trigger = irqd_get_trigger_type(d); + unsigned long flags; + spin_lock_irqsave(&bank->lock, flags); if (trigger) - _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); + _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), trigger); /* For level-triggered GPIOs, the clearing must be done after * the HW source is cleared, thus after the handler has run */ @@ -1173,6 +789,7 @@ static void gpio_unmask_irq(struct irq_data *d) } _set_gpio_irqenable(bank, gpio, 1); + spin_unlock_irqrestore(&bank->lock, flags); } static struct irq_chip gpio_irq_chip = { @@ -1189,45 +806,8 @@ static struct irq_chip gpio_irq_chip = { #ifdef CONFIG_ARCH_OMAP1 -/* MPUIO uses the always-on 32k clock */ - -static void mpuio_ack_irq(struct irq_data *d) -{ - /* The ISR is reset automatically, so do nothing here. */ -} - -static void mpuio_mask_irq(struct irq_data *d) -{ - unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 0); -} - -static void mpuio_unmask_irq(struct irq_data *d) -{ - unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 1); -} - -static struct irq_chip mpuio_irq_chip = { - .name = "MPUIO", - .irq_ack = mpuio_ack_irq, - .irq_mask = mpuio_mask_irq, - .irq_unmask = mpuio_unmask_irq, - .irq_set_type = gpio_irq_type, -#ifdef CONFIG_ARCH_OMAP16XX - /* REVISIT: assuming only 16xx supports MPUIO wake events */ - .irq_set_wake = gpio_wake_enable, -#endif -}; - - #define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) - #ifdef CONFIG_ARCH_OMAP16XX #include <linux/platform_device.h> @@ -1287,7 +867,7 @@ static struct platform_device omap_mpuio_device = { static inline void mpuio_init(void) { - struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0)); + struct gpio_bank *bank = &gpio_bank[0]; platform_set_drvdata(&omap_mpuio_device, bank); if (platform_driver_register(&omap_mpuio_driver) == 0) @@ -1300,8 +880,6 @@ static inline void mpuio_init(void) {} #else -extern struct irq_chip mpuio_irq_chip; - #define bank_is_mpuio(bank) 0 static inline void mpuio_init(void) {} @@ -1327,31 +905,8 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset) static int gpio_is_input(struct gpio_bank *bank, int mask) { - void __iomem *reg = bank->base; + void __iomem *reg = bank->base + bank->regs->direction; - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL / bank->stride; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; - default: - WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method"); - return -EINVAL; - } return __raw_readl(reg) & mask; } @@ -1363,9 +918,9 @@ static int gpio_get(struct gpio_chip *chip, unsigned offset) u32 mask; gpio = chip->base + offset; - bank = get_gpio_bank(gpio); + bank = container_of(chip, struct gpio_bank, chip); reg = bank->base; - mask = 1 << get_gpio_index(gpio); + mask = GPIO_BIT(bank, gpio); if (gpio_is_input(bank, mask)) return _get_gpio_datain(bank, gpio); @@ -1380,7 +935,7 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) bank = container_of(chip, struct gpio_bank, chip); spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, offset, value); + bank->set_dataout(bank, offset, value); _set_gpio_direction(bank, offset, 0); spin_unlock_irqrestore(&bank->lock, flags); return 0; @@ -1414,7 +969,7 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) bank = container_of(chip, struct gpio_bank, chip); spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, offset, value); + bank->set_dataout(bank, offset, value); spin_unlock_irqrestore(&bank->lock, flags); } @@ -1430,19 +985,17 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset) static void __init omap_gpio_show_rev(struct gpio_bank *bank) { + static bool called; u32 rev; - if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO)) - rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION); - else if (cpu_is_omap24xx() || cpu_is_omap34xx()) - rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION); - else if (cpu_is_omap44xx()) - rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION); - else + if (called || bank->regs->revision == USHRT_MAX) return; - printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", + rev = __raw_readw(bank->base + bank->regs->revision); + pr_info("OMAP GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); + + called = true; } /* This lock class tells lockdep that GPIO irqs are in a different @@ -1524,7 +1077,31 @@ static void omap_gpio_mod_init(struct gpio_bank *bank, int id) } } -static void __init omap_gpio_chip_init(struct gpio_bank *bank) +static __init void +omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, + unsigned int num) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base, + handle_simple_irq); + ct = gc->chip_types; + + /* NOTE: No ack required, reading IRQ status clears it. */ + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->chip.irq_set_type = gpio_irq_type; + /* REVISIT: assuming only 16xx supports MPUIO wake events */ + if (cpu_is_omap16xx()) + ct->chip.irq_set_wake = gpio_wake_enable, + + ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride; + irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); +} + +static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) { int j; static int gpio; @@ -1551,22 +1128,23 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank) } else { bank->chip.label = "gpio"; bank->chip.base = gpio; - gpio += bank_width; + gpio += bank->width; } - bank->chip.ngpio = bank_width; + bank->chip.ngpio = bank->width; gpiochip_add(&bank->chip); for (j = bank->virtual_irq_start; - j < bank->virtual_irq_start + bank_width; j++) { + j < bank->virtual_irq_start + bank->width; j++) { irq_set_lockdep_class(j, &gpio_lock_class); irq_set_chip_data(j, bank); - if (bank_is_mpuio(bank)) - irq_set_chip(j, &mpuio_irq_chip); - else + if (bank_is_mpuio(bank)) { + omap_mpuio_alloc_gc(bank, j, bank->width); + } else { irq_set_chip(j, &gpio_irq_chip); - irq_set_handler(j, handle_simple_irq); - set_irq_flags(j, IRQF_VALID); + irq_set_handler(j, handle_simple_irq); + set_irq_flags(j, IRQF_VALID); + } } irq_set_chained_handler(bank->irq, gpio_irq_handler); irq_set_handler_data(bank->irq, bank); @@ -1608,7 +1186,14 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) bank->dev = &pdev->dev; bank->dbck_flag = pdata->dbck_flag; bank->stride = pdata->bank_stride; - bank_width = pdata->bank_width; + bank->width = pdata->bank_width; + + bank->regs = pdata->regs; + + if (bank->regs->set_dataout && bank->regs->clr_dataout) + bank->set_dataout = _set_gpio_dataout_reg; + else + bank->set_dataout = _set_gpio_dataout_mask; spin_lock_init(&bank->lock); diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/gpio-pca953x.c index 0451d7ac94ac..c43b8ff626a7 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -1,5 +1,5 @@ /* - * pca953x.c - 4/8/16 bit I/O ports + * PCA953x 4/8/16 bit I/O ports * * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> * Copyright (C) 2007 Marvell International Ltd. @@ -21,7 +21,6 @@ #include <linux/slab.h> #ifdef CONFIG_OF_GPIO #include <linux/of_platform.h> -#include <linux/of_gpio.h> #endif #define PCA953X_INPUT 0 @@ -85,7 +84,6 @@ struct pca953x_chip { #endif struct i2c_client *client; - struct pca953x_platform_data *dyn_pdata; struct gpio_chip gpio_chip; const char *const *names; int chip_type; @@ -437,7 +435,7 @@ static irqreturn_t pca953x_irq_handler(int irq, void *devid) do { level = __ffs(pending); - generic_handle_irq(level + chip->irq_base); + handle_nested_irq(level + chip->irq_base); pending &= ~(1 << level); } while (pending); @@ -446,13 +444,13 @@ static irqreturn_t pca953x_irq_handler(int irq, void *devid) } static int pca953x_irq_setup(struct pca953x_chip *chip, - const struct i2c_device_id *id) + const struct i2c_device_id *id, + int irq_base) { struct i2c_client *client = chip->client; - struct pca953x_platform_data *pdata = client->dev.platform_data; int ret, offset = 0; - if (pdata->irq_base != -1 + if (irq_base != -1 && (id->driver_data & PCA_INT)) { int lvl; @@ -474,15 +472,19 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, * this purpose. */ chip->irq_stat &= chip->reg_direction; - chip->irq_base = pdata->irq_base; mutex_init(&chip->irq_lock); + chip->irq_base = irq_alloc_descs(-1, irq_base, chip->gpio_chip.ngpio, -1); + if (chip->irq_base < 0) + goto out_failed; + for (lvl = 0; lvl < chip->gpio_chip.ngpio; lvl++) { int irq = lvl + chip->irq_base; + irq_clear_status_flags(irq, IRQ_NOREQUEST); irq_set_chip_data(irq, chip); - irq_set_chip_and_handler(irq, &pca953x_irq_chip, - handle_simple_irq); + irq_set_chip(irq, &pca953x_irq_chip); + irq_set_nested_thread(irq, true); #ifdef CONFIG_ARM set_irq_flags(irq, IRQF_VALID); #else @@ -493,8 +495,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, ret = request_threaded_irq(client->irq, NULL, pca953x_irq_handler, - IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, dev_name(&client->dev), chip); if (ret) { dev_err(&client->dev, "failed to request irq %d\n", @@ -514,17 +515,19 @@ out_failed: static void pca953x_irq_teardown(struct pca953x_chip *chip) { - if (chip->irq_base != -1) + if (chip->irq_base != -1) { + irq_free_descs(chip->irq_base, chip->gpio_chip.ngpio); free_irq(chip->client->irq, chip); + } } #else /* CONFIG_GPIO_PCA953X_IRQ */ static int pca953x_irq_setup(struct pca953x_chip *chip, - const struct i2c_device_id *id) + const struct i2c_device_id *id, + int irq_base) { struct i2c_client *client = chip->client; - struct pca953x_platform_data *pdata = client->dev.platform_data; - if (pdata->irq_base != -1 && (id->driver_data & PCA_INT)) + if (irq_base != -1 && (id->driver_data & PCA_INT)) dev_warn(&client->dev, "interrupt support not compiled in\n"); return 0; @@ -541,46 +544,39 @@ static void pca953x_irq_teardown(struct pca953x_chip *chip) #ifdef CONFIG_OF_GPIO /* * Translate OpenFirmware node properties into platform_data + * WARNING: This is DEPRECATED and will be removed eventually! */ -static struct pca953x_platform_data * -pca953x_get_alt_pdata(struct i2c_client *client) +void +pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert) { - struct pca953x_platform_data *pdata; struct device_node *node; const __be32 *val; int size; node = client->dev.of_node; if (node == NULL) - return NULL; - - pdata = kzalloc(sizeof(struct pca953x_platform_data), GFP_KERNEL); - if (pdata == NULL) { - dev_err(&client->dev, "Unable to allocate platform_data\n"); - return NULL; - } + return; - pdata->gpio_base = -1; + *gpio_base = -1; val = of_get_property(node, "linux,gpio-base", &size); + WARN(val, "%s: device-tree property 'linux,gpio-base' is deprecated!", __func__); if (val) { if (size != sizeof(*val)) dev_warn(&client->dev, "%s: wrong linux,gpio-base\n", node->full_name); else - pdata->gpio_base = be32_to_cpup(val); + *gpio_base = be32_to_cpup(val); } val = of_get_property(node, "polarity", NULL); + WARN(val, "%s: device-tree property 'polarity' is deprecated!", __func__); if (val) - pdata->invert = *val; - - return pdata; + *invert = *val; } #else -static struct pca953x_platform_data * -pca953x_get_alt_pdata(struct i2c_client *client) +void +pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert) { - return NULL; } #endif @@ -642,6 +638,7 @@ static int __devinit pca953x_probe(struct i2c_client *client, { struct pca953x_platform_data *pdata; struct pca953x_chip *chip; + int irq_base=0, invert=0; int ret = 0; chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL); @@ -649,26 +646,22 @@ static int __devinit pca953x_probe(struct i2c_client *client, return -ENOMEM; pdata = client->dev.platform_data; - if (pdata == NULL) { - pdata = pca953x_get_alt_pdata(client); - /* - * Unlike normal platform_data, this is allocated - * dynamically and must be freed in the driver - */ - chip->dyn_pdata = pdata; - } - - if (pdata == NULL) { - dev_dbg(&client->dev, "no platform data\n"); - ret = -EINVAL; - goto out_failed; + if (pdata) { + irq_base = pdata->irq_base; + chip->gpio_start = pdata->gpio_base; + invert = pdata->invert; + chip->names = pdata->names; + } else { + pca953x_get_alt_pdata(client, &chip->gpio_start, &invert); +#ifdef CONFIG_OF_GPIO + /* If I2C node has no interrupts property, disable GPIO interrupts */ + if (of_find_property(client->dev.of_node, "interrupts", NULL) == NULL) + irq_base = -1; +#endif } chip->client = client; - chip->gpio_start = pdata->gpio_base; - - chip->names = pdata->names; chip->chip_type = id->driver_data & (PCA953X_TYPE | PCA957X_TYPE); mutex_init(&chip->i2c_lock); @@ -679,13 +672,13 @@ static int __devinit pca953x_probe(struct i2c_client *client, pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK); if (chip->chip_type == PCA953X_TYPE) - device_pca953x_init(chip, pdata->invert); + device_pca953x_init(chip, invert); else if (chip->chip_type == PCA957X_TYPE) - device_pca957x_init(chip, pdata->invert); + device_pca957x_init(chip, invert); else goto out_failed; - ret = pca953x_irq_setup(chip, id); + ret = pca953x_irq_setup(chip, id, irq_base); if (ret) goto out_failed; @@ -693,7 +686,7 @@ static int __devinit pca953x_probe(struct i2c_client *client, if (ret) goto out_failed_irq; - if (pdata->setup) { + if (pdata && pdata->setup) { ret = pdata->setup(client, chip->gpio_chip.base, chip->gpio_chip.ngpio, pdata->context); if (ret < 0) @@ -706,7 +699,6 @@ static int __devinit pca953x_probe(struct i2c_client *client, out_failed_irq: pca953x_irq_teardown(chip); out_failed: - kfree(chip->dyn_pdata); kfree(chip); return ret; } @@ -717,7 +709,7 @@ static int pca953x_remove(struct i2c_client *client) struct pca953x_chip *chip = i2c_get_clientdata(client); int ret = 0; - if (pdata->teardown) { + if (pdata && pdata->teardown) { ret = pdata->teardown(client, chip->gpio_chip.base, chip->gpio_chip.ngpio, pdata->context); if (ret < 0) { @@ -735,7 +727,6 @@ static int pca953x_remove(struct i2c_client *client) } pca953x_irq_teardown(chip); - kfree(chip->dyn_pdata); kfree(chip); return 0; } diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/gpio-pcf857x.c index 879b473aab5a..7369fdda92b0 100644 --- a/drivers/gpio/pcf857x.c +++ b/drivers/gpio/gpio-pcf857x.c @@ -1,5 +1,5 @@ /* - * pcf857x - driver for pcf857x, pca857x, and pca967x I2C GPIO expanders + * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders * * Copyright (C) 2007 David Brownell * diff --git a/drivers/gpio/pch_gpio.c b/drivers/gpio/gpio-pch.c index 36919e77c495..36919e77c495 100644 --- a/drivers/gpio/pch_gpio.c +++ b/drivers/gpio/gpio-pch.c diff --git a/drivers/gpio/pl061.c b/drivers/gpio/gpio-pl061.c index 6fcb28cdd862..2c5a18f32bf3 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -1,7 +1,5 @@ /* - * linux/drivers/gpio/pl061.c - * - * Copyright (C) 2008, 2009 Provigent Ltd. + * Copyright (C) 2008, 2009 Provigent Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c index ea37c0461788..ef67f1952a72 100644 --- a/drivers/gpio/gpio-plat-samsung.c +++ b/drivers/gpio/gpio-plat-samsung.c @@ -1,5 +1,4 @@ -/* arch/arm/plat-samsung/gpiolib.c - * +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/drivers/gpio/rdc321x-gpio.c b/drivers/gpio/gpio-rdc321x.c index 2762698e0204..2762698e0204 100644 --- a/drivers/gpio/rdc321x-gpio.c +++ b/drivers/gpio/gpio-rdc321x.c diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c index 2842394b28b5..7f87b0c76e0b 100644 --- a/drivers/gpio/gpio-s5pc100.c +++ b/drivers/gpio/gpio-s5pc100.c @@ -1,4 +1,5 @@ -/* linux/arch/arm/mach-s5pc100/gpiolib.c +/* + * S5PC100 - GPIOlib support * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -6,8 +7,6 @@ * Copyright 2009 Samsung Electronics Co * Kyungmin Park <kyungmin.park@samsung.com> * - * S5PC100 - GPIOlib support - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c index 1ba20a703e05..eb12f1602de9 100644 --- a/drivers/gpio/gpio-s5pv210.c +++ b/drivers/gpio/gpio-s5pv210.c @@ -1,10 +1,9 @@ -/* linux/arch/arm/mach-s5pv210/gpiolib.c +/* + * S5PV210 - GPIOlib support * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * S5PV210 - GPIOlib support - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/drivers/gpio/sch_gpio.c b/drivers/gpio/gpio-sch.c index 56060421cdff..163515845494 100644 --- a/drivers/gpio/sch_gpio.c +++ b/drivers/gpio/gpio-sch.c @@ -1,5 +1,5 @@ /* - * sch_gpio.c - GPIO interface for Intel Poulsbo SCH + * GPIO interface for Intel Poulsbo SCH * * Copyright (c) 2010 CompuLab Ltd * Author: Denis Turischev <denis@compulab.co.il> diff --git a/drivers/gpio/stmpe-gpio.c b/drivers/gpio/gpio-stmpe.c index 4c980b573328..4c980b573328 100644 --- a/drivers/gpio/stmpe-gpio.c +++ b/drivers/gpio/gpio-stmpe.c diff --git a/drivers/gpio/sx150x.c b/drivers/gpio/gpio-sx150x.c index a4f73534394e..a4f73534394e 100644 --- a/drivers/gpio/sx150x.c +++ b/drivers/gpio/gpio-sx150x.c diff --git a/drivers/gpio/tc3589x-gpio.c b/drivers/gpio/gpio-tc3589x.c index 2a82e8999a42..2a82e8999a42 100644 --- a/drivers/gpio/tc3589x-gpio.c +++ b/drivers/gpio/gpio-tc3589x.c diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c new file mode 100644 index 000000000000..747eb40e8afe --- /dev/null +++ b/drivers/gpio/gpio-tegra.c @@ -0,0 +1,441 @@ +/* + * arch/arm/mach-tegra/gpio.c + * + * Copyright (c) 2010 Google, Inc + * + * Author: + * Erik Gilling <konkers@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/of.h> + +#include <asm/mach/irq.h> + +#include <mach/iomap.h> +#include <mach/suspend.h> + +#define GPIO_BANK(x) ((x) >> 5) +#define GPIO_PORT(x) (((x) >> 3) & 0x3) +#define GPIO_BIT(x) ((x) & 0x7) + +#define GPIO_REG(x) (IO_TO_VIRT(TEGRA_GPIO_BASE) + \ + GPIO_BANK(x) * 0x80 + \ + GPIO_PORT(x) * 4) + +#define GPIO_CNF(x) (GPIO_REG(x) + 0x00) +#define GPIO_OE(x) (GPIO_REG(x) + 0x10) +#define GPIO_OUT(x) (GPIO_REG(x) + 0X20) +#define GPIO_IN(x) (GPIO_REG(x) + 0x30) +#define GPIO_INT_STA(x) (GPIO_REG(x) + 0x40) +#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50) +#define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60) +#define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70) + +#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800) +#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810) +#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820) +#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840) +#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850) +#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860) + +#define GPIO_INT_LVL_MASK 0x010101 +#define GPIO_INT_LVL_EDGE_RISING 0x000101 +#define GPIO_INT_LVL_EDGE_FALLING 0x000100 +#define GPIO_INT_LVL_EDGE_BOTH 0x010100 +#define GPIO_INT_LVL_LEVEL_HIGH 0x000001 +#define GPIO_INT_LVL_LEVEL_LOW 0x000000 + +struct tegra_gpio_bank { + int bank; + int irq; + spinlock_t lvl_lock[4]; +#ifdef CONFIG_PM + u32 cnf[4]; + u32 out[4]; + u32 oe[4]; + u32 int_enb[4]; + u32 int_lvl[4]; +#endif +}; + + +static struct tegra_gpio_bank tegra_gpio_banks[] = { + {.bank = 0, .irq = INT_GPIO1}, + {.bank = 1, .irq = INT_GPIO2}, + {.bank = 2, .irq = INT_GPIO3}, + {.bank = 3, .irq = INT_GPIO4}, + {.bank = 4, .irq = INT_GPIO5}, + {.bank = 5, .irq = INT_GPIO6}, + {.bank = 6, .irq = INT_GPIO7}, +}; + +static int tegra_gpio_compose(int bank, int port, int bit) +{ + return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7); +} + +static void tegra_gpio_mask_write(u32 reg, int gpio, int value) +{ + u32 val; + + val = 0x100 << GPIO_BIT(gpio); + if (value) + val |= 1 << GPIO_BIT(gpio); + __raw_writel(val, reg); +} + +void tegra_gpio_enable(int gpio) +{ + tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1); +} + +void tegra_gpio_disable(int gpio) +{ + tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0); +} + +static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value); +} + +static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1; +} + +static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0); + return 0; +} + +static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + tegra_gpio_set(chip, offset, value); + tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1); + return 0; +} + + + +static struct gpio_chip tegra_gpio_chip = { + .label = "tegra-gpio", + .direction_input = tegra_gpio_direction_input, + .get = tegra_gpio_get, + .direction_output = tegra_gpio_direction_output, + .set = tegra_gpio_set, + .base = 0, + .ngpio = TEGRA_NR_GPIOS, +}; + +static void tegra_gpio_irq_ack(struct irq_data *d) +{ + int gpio = d->irq - INT_GPIO_BASE; + + __raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio)); +} + +static void tegra_gpio_irq_mask(struct irq_data *d) +{ + int gpio = d->irq - INT_GPIO_BASE; + + tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0); +} + +static void tegra_gpio_irq_unmask(struct irq_data *d) +{ + int gpio = d->irq - INT_GPIO_BASE; + + tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1); +} + +static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + int gpio = d->irq - INT_GPIO_BASE; + struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + int port = GPIO_PORT(gpio); + int lvl_type; + int val; + unsigned long flags; + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + lvl_type = GPIO_INT_LVL_EDGE_RISING; + break; + + case IRQ_TYPE_EDGE_FALLING: + lvl_type = GPIO_INT_LVL_EDGE_FALLING; + break; + + case IRQ_TYPE_EDGE_BOTH: + lvl_type = GPIO_INT_LVL_EDGE_BOTH; + break; + + case IRQ_TYPE_LEVEL_HIGH: + lvl_type = GPIO_INT_LVL_LEVEL_HIGH; + break; + + case IRQ_TYPE_LEVEL_LOW: + lvl_type = GPIO_INT_LVL_LEVEL_LOW; + break; + + default: + return -EINVAL; + } + + spin_lock_irqsave(&bank->lvl_lock[port], flags); + + val = __raw_readl(GPIO_INT_LVL(gpio)); + val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio)); + val |= lvl_type << GPIO_BIT(gpio); + __raw_writel(val, GPIO_INT_LVL(gpio)); + + spin_unlock_irqrestore(&bank->lvl_lock[port], flags); + + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + __irq_set_handler_locked(d->irq, handle_level_irq); + else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + __irq_set_handler_locked(d->irq, handle_edge_irq); + + return 0; +} + +static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct tegra_gpio_bank *bank; + int port; + int pin; + int unmasked = 0; + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + bank = irq_get_handler_data(irq); + + for (port = 0; port < 4; port++) { + int gpio = tegra_gpio_compose(bank->bank, port, 0); + unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) & + __raw_readl(GPIO_INT_ENB(gpio)); + u32 lvl = __raw_readl(GPIO_INT_LVL(gpio)); + + for_each_set_bit(pin, &sta, 8) { + __raw_writel(1 << pin, GPIO_INT_CLR(gpio)); + + /* if gpio is edge triggered, clear condition + * before executing the hander so that we don't + * miss edges + */ + if (lvl & (0x100 << pin)) { + unmasked = 1; + chained_irq_exit(chip, desc); + } + + generic_handle_irq(gpio_to_irq(gpio + pin)); + } + } + + if (!unmasked) + chained_irq_exit(chip, desc); + +} + +#ifdef CONFIG_PM +void tegra_gpio_resume(void) +{ + unsigned long flags; + int b; + int p; + + local_irq_save(flags); + + for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { + struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; + + for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { + unsigned int gpio = (b<<5) | (p<<3); + __raw_writel(bank->cnf[p], GPIO_CNF(gpio)); + __raw_writel(bank->out[p], GPIO_OUT(gpio)); + __raw_writel(bank->oe[p], GPIO_OE(gpio)); + __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio)); + __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio)); + } + } + + local_irq_restore(flags); +} + +void tegra_gpio_suspend(void) +{ + unsigned long flags; + int b; + int p; + + local_irq_save(flags); + for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { + struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; + + for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { + unsigned int gpio = (b<<5) | (p<<3); + bank->cnf[p] = __raw_readl(GPIO_CNF(gpio)); + bank->out[p] = __raw_readl(GPIO_OUT(gpio)); + bank->oe[p] = __raw_readl(GPIO_OE(gpio)); + bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio)); + bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio)); + } + } + local_irq_restore(flags); +} + +static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable) +{ + struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + return irq_set_irq_wake(bank->irq, enable); +} +#endif + +static struct irq_chip tegra_gpio_irq_chip = { + .name = "GPIO", + .irq_ack = tegra_gpio_irq_ack, + .irq_mask = tegra_gpio_irq_mask, + .irq_unmask = tegra_gpio_irq_unmask, + .irq_set_type = tegra_gpio_irq_set_type, +#ifdef CONFIG_PM + .irq_set_wake = tegra_gpio_wake_enable, +#endif +}; + + +/* This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + +static int __init tegra_gpio_init(void) +{ + struct tegra_gpio_bank *bank; + int i; + int j; + + for (i = 0; i < 7; i++) { + for (j = 0; j < 4; j++) { + int gpio = tegra_gpio_compose(i, j, 0); + __raw_writel(0x00, GPIO_INT_ENB(gpio)); + } + } + +#ifdef CONFIG_OF_GPIO + /* + * This isn't ideal, but it gets things hooked up until this + * driver is converted into a platform_device + */ + tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL, + "nvidia,tegra20-gpio"); +#endif /* CONFIG_OF_GPIO */ + + gpiochip_add(&tegra_gpio_chip); + + for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { + bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))]; + + irq_set_lockdep_class(i, &gpio_lock_class); + irq_set_chip_data(i, bank); + irq_set_chip_and_handler(i, &tegra_gpio_irq_chip, + handle_simple_irq); + set_irq_flags(i, IRQF_VALID); + } + + for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { + bank = &tegra_gpio_banks[i]; + + irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler); + irq_set_handler_data(bank->irq, bank); + + for (j = 0; j < 4; j++) + spin_lock_init(&bank->lvl_lock[j]); + } + + return 0; +} + +postcore_initcall(tegra_gpio_init); + +void __init tegra_gpio_config(struct tegra_gpio_table *table, int num) +{ + int i; + + for (i = 0; i < num; i++) { + int gpio = table[i].gpio; + + if (table[i].enable) + tegra_gpio_enable(gpio); + else + tegra_gpio_disable(gpio); + } +} + +#ifdef CONFIG_DEBUG_FS + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static int dbg_gpio_show(struct seq_file *s, void *unused) +{ + int i; + int j; + + for (i = 0; i < 7; i++) { + for (j = 0; j < 4; j++) { + int gpio = tegra_gpio_compose(i, j, 0); + seq_printf(s, + "%d:%d %02x %02x %02x %02x %02x %02x %06x\n", + i, j, + __raw_readl(GPIO_CNF(gpio)), + __raw_readl(GPIO_OE(gpio)), + __raw_readl(GPIO_OUT(gpio)), + __raw_readl(GPIO_IN(gpio)), + __raw_readl(GPIO_INT_STA(gpio)), + __raw_readl(GPIO_INT_ENB(gpio)), + __raw_readl(GPIO_INT_LVL(gpio))); + } + } + return 0; +} + +static int dbg_gpio_open(struct inode *inode, struct file *file) +{ + return single_open(file, dbg_gpio_show, &inode->i_private); +} + +static const struct file_operations debug_fops = { + .open = dbg_gpio_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init tegra_gpio_debuginit(void) +{ + (void) debugfs_create_file("tegra_gpio", S_IRUGO, + NULL, NULL, &debug_fops); + return 0; +} +late_initcall(tegra_gpio_debuginit); +#endif diff --git a/drivers/gpio/timbgpio.c b/drivers/gpio/gpio-timberdale.c index 0265872e57d1..c593bd46bfb6 100644 --- a/drivers/gpio/timbgpio.c +++ b/drivers/gpio/gpio-timberdale.c @@ -1,5 +1,5 @@ /* - * timbgpio.c timberdale FPGA GPIO driver + * Timberdale FPGA GPIO driver * Copyright (c) 2009 Intel Corporation * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/gpio/tps65910-gpio.c b/drivers/gpio/gpio-tps65910.c index 8d1ddfdd63eb..b9c1c297669e 100644 --- a/drivers/gpio/tps65910-gpio.c +++ b/drivers/gpio/gpio-tps65910.c @@ -1,5 +1,5 @@ /* - * tps65910-gpio.c -- TI TPS6591x + * TI TPS6591x GPIO driver * * Copyright 2010 Texas Instruments Inc. * @@ -81,8 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) switch(tps65910_chip_id(tps65910)) { case TPS65910: tps65910->gpio.ngpio = 6; + break; case TPS65911: tps65910->gpio.ngpio = 9; + break; default: return; } diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/gpio-twl4030.c index 57635ac35a73..b8b4f228757c 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/gpio-twl4030.c @@ -1,5 +1,5 @@ /* - * twl4030_gpio.c -- access to GPIOs on TWL4030/TPS659x0 chips + * Access to GPIOs on TWL4030/TPS659x0 chips * * Copyright (C) 2006-2007 Texas Instruments, Inc. * Copyright (C) 2006 MontaVista Software, Inc. diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c index d92790140fe5..fd2dfeeefdf3 100644 --- a/drivers/gpio/gpio-u300.c +++ b/drivers/gpio/gpio-u300.c @@ -1,11 +1,8 @@ /* - * - * arch/arm/mach-u300/gpio.c - * + * U300 GPIO module. * * Copyright (C) 2007-2009 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 - * U300 GPIO module. * This can driver either of the two basic GPIO cores * available in the U300 platforms: * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) diff --git a/drivers/gpio/ucb1400_gpio.c b/drivers/gpio/gpio-ucb1400.c index 50e6bd1392ce..50e6bd1392ce 100644 --- a/drivers/gpio/ucb1400_gpio.c +++ b/drivers/gpio/gpio-ucb1400.c diff --git a/drivers/gpio/vr41xx_giu.c b/drivers/gpio/gpio-vr41xx.c index a365be040b36..98723cb9ac68 100644 --- a/drivers/gpio/vr41xx_giu.c +++ b/drivers/gpio/gpio-vr41xx.c @@ -518,7 +518,7 @@ static int __devinit giu_probe(struct platform_device *pdev) if (!res) return -EBUSY; - giu_base = ioremap(res->start, res->end - res->start + 1); + giu_base = ioremap(res->start, resource_size(res)); if (!giu_base) return -ENOMEM; diff --git a/drivers/gpio/vx855_gpio.c b/drivers/gpio/gpio-vx855.c index ef5aabd8b8b7..ef5aabd8b8b7 100644 --- a/drivers/gpio/vx855_gpio.c +++ b/drivers/gpio/gpio-vx855.c diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/gpio-wm831x.c index 309644cf4d9b..deb949e75ec1 100644 --- a/drivers/gpio/wm831x-gpio.c +++ b/drivers/gpio/gpio-wm831x.c @@ -1,5 +1,5 @@ /* - * wm831x-gpio.c -- gpiolib support for Wolfson WM831x PMICs + * gpiolib support for Wolfson WM831x PMICs * * Copyright 2009 Wolfson Microelectronics PLC. * @@ -180,6 +180,7 @@ static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) break; case WM831X_GPIO_PULL_UP: pull = "pullup"; + break; default: pull = "INVALID PULL"; break; diff --git a/drivers/gpio/wm8350-gpiolib.c b/drivers/gpio/gpio-wm8350.c index 359999290f55..a06af5154838 100644 --- a/drivers/gpio/wm8350-gpiolib.c +++ b/drivers/gpio/gpio-wm8350.c @@ -1,5 +1,5 @@ /* - * wm835x-gpiolib.c -- gpiolib support for Wolfson WM835x PMICs + * gpiolib support for Wolfson WM835x PMICs * * Copyright 2009 Wolfson Microelectronics PLC. * diff --git a/drivers/gpio/wm8994-gpio.c b/drivers/gpio/gpio-wm8994.c index c822baacd8fc..96198f3fab73 100644 --- a/drivers/gpio/wm8994-gpio.c +++ b/drivers/gpio/gpio-wm8994.c @@ -1,5 +1,5 @@ /* - * wm8994-gpio.c -- gpiolib support for Wolfson WM8994 + * gpiolib support for Wolfson WM8994 * * Copyright 2009 Wolfson Microelectronics PLC. * diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/gpio-xilinx.c index 846fbd5e31bf..846fbd5e31bf 100644 --- a/drivers/gpio/xilinx_gpio.c +++ b/drivers/gpio/gpio-xilinx.c |