diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dsi.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dsi.c | 190 |
1 files changed, 150 insertions, 40 deletions
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 33656647f8bc..02f99d768d49 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -35,6 +35,11 @@ /* the sub-encoders aka panel drivers */ static const struct intel_dsi_device intel_dsi_devices[] = { + { + .panel_id = MIPI_DSI_GENERIC_PANEL_ID, + .name = "vbt-generic-dsi-vid-mode-display", + .dev_ops = &vbt_generic_dsi_display_ops, + }, }; static void band_gap_reset(struct drm_i915_private *dev_priv) @@ -59,12 +64,12 @@ static struct intel_dsi *intel_attached_dsi(struct drm_connector *connector) static inline bool is_vid_mode(struct intel_dsi *intel_dsi) { - return intel_dsi->dev.type == INTEL_DSI_VIDEO_MODE; + return intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE; } static inline bool is_cmd_mode(struct intel_dsi *intel_dsi) { - return intel_dsi->dev.type == INTEL_DSI_COMMAND_MODE; + return intel_dsi->operation_mode == INTEL_DSI_COMMAND_MODE; } static void intel_dsi_hot_plug(struct intel_encoder *encoder) @@ -94,13 +99,6 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder, return true; } -static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder) -{ - DRM_DEBUG_KMS("\n"); - - vlv_enable_dsi_pll(encoder); -} - static void intel_dsi_device_ready(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; @@ -110,6 +108,15 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); + mutex_lock(&dev_priv->dpio_lock); + /* program rcomp for compliance, reduce from 50 ohms to 45 ohms + * needed everytime after power gate */ + vlv_flisdsi_write(dev_priv, 0x04, 0x0004); + mutex_unlock(&dev_priv->dpio_lock); + + /* bandgap reset is needed after everytime we do power gate */ + band_gap_reset(dev_priv); + val = I915_READ(MIPI_PORT_CTRL(pipe)); I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD); usleep_range(1000, 1500); @@ -122,21 +129,6 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); usleep_range(2000, 2500); } -static void intel_dsi_pre_enable(struct intel_encoder *encoder) -{ - struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); - - DRM_DEBUG_KMS("\n"); - - if (intel_dsi->dev.dev_ops->panel_reset) - intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev); - - /* put device in ready state */ - intel_dsi_device_ready(encoder); - - if (intel_dsi->dev.dev_ops->send_otp_cmds) - intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev); -} static void intel_dsi_enable(struct intel_encoder *encoder) { @@ -153,18 +145,78 @@ static void intel_dsi_enable(struct intel_encoder *encoder) I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4); else { msleep(20); /* XXX */ - dpi_send_cmd(intel_dsi, TURN_ON); + dpi_send_cmd(intel_dsi, TURN_ON, DPI_LP_MODE_EN); msleep(100); + if (intel_dsi->dev.dev_ops->enable) + intel_dsi->dev.dev_ops->enable(&intel_dsi->dev); + /* assert ip_tg_enable signal */ temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK; temp = temp | intel_dsi->port_bits; I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE); POSTING_READ(MIPI_PORT_CTRL(pipe)); } +} + +static void intel_dsi_pre_enable(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + enum pipe pipe = intel_crtc->pipe; + u32 tmp; + + DRM_DEBUG_KMS("\n"); + + /* Disable DPOunit clock gating, can stall pipe + * and we need DPLL REFA always enabled */ + tmp = I915_READ(DPLL(pipe)); + tmp |= DPLL_REFA_CLK_ENABLE_VLV; + I915_WRITE(DPLL(pipe), tmp); + + tmp = I915_READ(DSPCLK_GATE_D); + tmp |= DPOUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, tmp); + + /* put device in ready state */ + intel_dsi_device_ready(encoder); + + msleep(intel_dsi->panel_on_delay); + + if (intel_dsi->dev.dev_ops->panel_reset) + intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev); + + if (intel_dsi->dev.dev_ops->send_otp_cmds) + intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev); - if (intel_dsi->dev.dev_ops->enable) - intel_dsi->dev.dev_ops->enable(&intel_dsi->dev); + /* Enable port in pre-enable phase itself because as per hw team + * recommendation, port should be enabled befor plane & pipe */ + intel_dsi_enable(encoder); +} + +static void intel_dsi_enable_nop(struct intel_encoder *encoder) +{ + DRM_DEBUG_KMS("\n"); + + /* for DSI port enable has to be done before pipe + * and plane enable, so port enable is done in + * pre_enable phase itself unlike other encoders + */ +} + +static void intel_dsi_pre_disable(struct intel_encoder *encoder) +{ + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + + DRM_DEBUG_KMS("\n"); + + if (is_vid_mode(intel_dsi)) { + /* Send Shutdown command to the panel in LP mode */ + dpi_send_cmd(intel_dsi, SHUTDOWN, DPI_LP_MODE_EN); + msleep(10); + } } static void intel_dsi_disable(struct intel_encoder *encoder) @@ -179,9 +231,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); if (is_vid_mode(intel_dsi)) { - dpi_send_cmd(intel_dsi, SHUTDOWN); - msleep(10); - /* de-assert ip_tg_enable signal */ temp = I915_READ(MIPI_PORT_CTRL(pipe)); I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE); @@ -190,6 +239,23 @@ static void intel_dsi_disable(struct intel_encoder *encoder) msleep(2); } + /* Panel commands can be sent when clock is in LP11 */ + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x0); + + temp = I915_READ(MIPI_CTRL(pipe)); + temp &= ~ESCAPE_CLOCK_DIVIDER_MASK; + I915_WRITE(MIPI_CTRL(pipe), temp | + intel_dsi->escape_clk_div << + ESCAPE_CLOCK_DIVIDER_SHIFT); + + I915_WRITE(MIPI_EOT_DISABLE(pipe), CLOCKSTOP); + + temp = I915_READ(MIPI_DSI_FUNC_PRG(pipe)); + temp &= ~VID_MODE_FORMAT_MASK; + I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), temp); + + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x1); + /* if disable packets are sent before sending shutdown packet then in * some next enable sequence send turn on packet error is observed */ if (intel_dsi->dev.dev_ops->disable) @@ -227,16 +293,28 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) vlv_disable_dsi_pll(encoder); } + static void intel_dsi_post_disable(struct intel_encoder *encoder) { + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + u32 val; DRM_DEBUG_KMS("\n"); + intel_dsi_disable(encoder); + intel_dsi_clear_device_ready(encoder); + val = I915_READ(DSPCLK_GATE_D); + val &= ~DPOUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, val); + if (intel_dsi->dev.dev_ops->disable_panel_power) intel_dsi->dev.dev_ops->disable_panel_power(&intel_dsi->dev); + + msleep(intel_dsi->panel_off_delay); + msleep(intel_dsi->panel_pwr_cycle_delay); } static bool intel_dsi_get_hw_state(struct intel_encoder *encoder, @@ -364,7 +442,7 @@ static void set_dsi_timings(struct drm_encoder *encoder, I915_WRITE(MIPI_VBP_COUNT(pipe), vbp); } -static void intel_dsi_mode_set(struct intel_encoder *intel_encoder) +static void intel_dsi_prepare(struct intel_encoder *intel_encoder) { struct drm_encoder *encoder = &intel_encoder->base; struct drm_device *dev = encoder->dev; @@ -379,9 +457,6 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder) DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe)); - /* XXX: Location of the call */ - band_gap_reset(dev_priv); - /* escape clock divider, 20MHz, shared for A and C. device ready must be * off when doing this! txclkesc? */ tmp = I915_READ(MIPI_CTRL(0)); @@ -452,10 +527,20 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder) /* dphy stuff */ /* in terms of low power clock */ - I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(ESCAPE_CLOCK_DIVIDER_1, 100)); + I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(intel_dsi->escape_clk_div, 100)); + + val = 0; + if (intel_dsi->eotp_pkt == 0) + val |= EOT_DISABLE; + + if (intel_dsi->clock_stop) + val |= CLOCKSTOP; /* recovery disables */ - I915_WRITE(MIPI_EOT_DISABLE(pipe), intel_dsi->eot_disable); + I915_WRITE(MIPI_EOT_DISABLE(pipe), val); + + /* in terms of low power clock */ + I915_WRITE(MIPI_INIT_COUNT(pipe), intel_dsi->init_count); /* in terms of txbyteclkhs. actual high to low switch + * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK. @@ -484,9 +569,23 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder) intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT); if (is_vid_mode(intel_dsi)) + /* Some panels might have resolution which is not a multiple of + * 64 like 1366 x 768. Enable RANDOM resolution support for such + * panels by default */ I915_WRITE(MIPI_VIDEO_MODE_FORMAT(pipe), intel_dsi->video_frmt_cfg_bits | - intel_dsi->video_mode_format); + intel_dsi->video_mode_format | + IP_TG_CONFIG | + RANDOM_DPI_DISPLAY_RESOLUTION); +} + +static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder) +{ + DRM_DEBUG_KMS("\n"); + + intel_dsi_prepare(encoder); + + vlv_enable_dsi_pll(encoder); } static enum drm_connector_status @@ -566,11 +665,16 @@ bool intel_dsi_init(struct drm_device *dev) struct intel_connector *intel_connector; struct drm_connector *connector; struct drm_display_mode *fixed_mode = NULL; + struct drm_i915_private *dev_priv = dev->dev_private; const struct intel_dsi_device *dsi; unsigned int i; DRM_DEBUG_KMS("\n"); + /* There is no detection method for MIPI so rely on VBT */ + if (!dev_priv->vbt.has_mipi) + return false; + intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL); if (!intel_dsi) return false; @@ -585,6 +689,13 @@ bool intel_dsi_init(struct drm_device *dev) encoder = &intel_encoder->base; intel_dsi->attached_connector = intel_connector; + if (IS_VALLEYVIEW(dev)) { + dev_priv->mipi_mmio_base = VLV_MIPI_BASE; + } else { + DRM_ERROR("Unsupported Mipi device to reg base"); + return false; + } + connector = &intel_connector->base; drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI); @@ -594,9 +705,8 @@ bool intel_dsi_init(struct drm_device *dev) intel_encoder->compute_config = intel_dsi_compute_config; intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable; intel_encoder->pre_enable = intel_dsi_pre_enable; - intel_encoder->enable = intel_dsi_enable; - intel_encoder->mode_set = intel_dsi_mode_set; - intel_encoder->disable = intel_dsi_disable; + intel_encoder->enable = intel_dsi_enable_nop; + intel_encoder->disable = intel_dsi_pre_disable; intel_encoder->post_disable = intel_dsi_post_disable; intel_encoder->get_hw_state = intel_dsi_get_hw_state; intel_encoder->get_config = intel_dsi_get_config; |