summaryrefslogtreecommitdiff
path: root/drivers/hwmon/w83781d.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/w83781d.c')
-rw-r--r--drivers/hwmon/w83781d.c36
1 files changed, 19 insertions, 17 deletions
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index aeec5b1d81c9..f9d513949a38 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -64,8 +64,8 @@ enum chips { w83781d, w83782d, w83783s, as99127f };
/* Insmod parameters */
static unsigned short force_subclients[4];
module_param_array(force_subclients, short, NULL, 0);
-MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
- "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+MODULE_PARM_DESC(force_subclients,
+ "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
static bool reset;
module_param(reset, bool, 0);
@@ -826,8 +826,9 @@ store_sensor(struct device *dev, struct device_attribute *da,
data->sens[nr] = val;
break;
case W83781D_DEFAULT_BETA:
- dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
- "instead\n", W83781D_DEFAULT_BETA);
+ dev_warn(dev,
+ "Sensor type %d is deprecated, please use 4 instead\n",
+ W83781D_DEFAULT_BETA);
/* fall through */
case 4: /* thermistor */
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
@@ -874,8 +875,8 @@ w83781d_detect_subclients(struct i2c_client *new_client)
for (i = 2; i <= 3; i++) {
if (force_subclients[i] < 0x48 ||
force_subclients[i] > 0x4f) {
- dev_err(&new_client->dev, "Invalid subclient "
- "address %d; must be 0x48-0x4f\n",
+ dev_err(&new_client->dev,
+ "Invalid subclient address %d; must be 0x48-0x4f\n",
force_subclients[i]);
err = -EINVAL;
goto ERROR_SC_1;
@@ -910,9 +911,9 @@ w83781d_detect_subclients(struct i2c_client *new_client)
for (i = 0; i < num_sc; i++) {
data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
if (!data->lm75[i]) {
- dev_err(&new_client->dev, "Subclient %d "
- "registration at address 0x%x "
- "failed.\n", i, sc_addr[i]);
+ dev_err(&new_client->dev,
+ "Subclient %d registration at address 0x%x failed.\n",
+ i, sc_addr[i]);
err = -ENOMEM;
if (i == 1)
goto ERROR_SC_3;
@@ -1176,8 +1177,9 @@ w83781d_detect(struct i2c_client *client, struct i2c_board_info *info)
goto err_nodev;
if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
- dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
- "be the same as ISA device\n", address);
+ dev_dbg(&adapter->dev,
+ "Device at 0x%02x appears to be the same as ISA device\n",
+ address);
goto err_nodev;
}
@@ -1367,8 +1369,8 @@ w83781d_init_device(struct device *dev)
* as I see very little reason why this would be needed at
* all.
*/
- dev_info(dev, "If reset=1 solved a problem you were "
- "having, please report!\n");
+ dev_info(dev,
+ "If reset=1 solved a problem you were having, please report!\n");
/* save these registers */
i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
@@ -1425,8 +1427,8 @@ w83781d_init_device(struct device *dev)
/* Enable temp2 */
tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
if (tmp & 0x01) {
- dev_warn(dev, "Enabling temp2, readings "
- "might not make sense\n");
+ dev_warn(dev,
+ "Enabling temp2, readings might not make sense\n");
w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
tmp & 0xfe);
}
@@ -1436,8 +1438,8 @@ w83781d_init_device(struct device *dev)
tmp = w83781d_read_value(data,
W83781D_REG_TEMP3_CONFIG);
if (tmp & 0x01) {
- dev_warn(dev, "Enabling temp3, "
- "readings might not make sense\n");
+ dev_warn(dev,
+ "Enabling temp3, readings might not make sense\n");
w83781d_write_value(data,
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}