1 files changed, 0 insertions, 101 deletions
diff --git a/drivers/i2c/busses/i2c-rpx.c b/drivers/i2c/busses/i2c-rpx.c
deleted file mode 100644
index 8764df06f51d..000000000000
--- a/drivers/i2c/busses/i2c-rpx.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Embedded Planet RPX Lite MPC8xx CPM I2C interface.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
- *
- * moved into proper i2c interface;
- * Brad Parker (brad@heeltoe.com)
- *
- * RPX lite specific parts of the i2c interface
- * Update:  There actually isn't anything RPXLite-specific about this module.
- * This should work for most any 8xx board.  The console messages have been 
- * changed to eliminate RPXLite references.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/stddef.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-8xx.h>
-#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
-
-
-static void
-rpx_iic_init(struct i2c_algo_8xx_data *data)
-{
-	volatile cpm8xx_t *cp;
-	volatile immap_t *immap;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-	immap = (immap_t *)IMAP_ADDR;	/* and to internal registers */
-
-	data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-
-	/* Check for and use a microcode relocation patch.
-	*/
-	if ((data->reloc = data->iip->iic_rpbase))
-		data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase];
-		
-	data->i2c = (i2c8xx_t *)&(immap->im_i2c);
-	data->cp = cp;
-
-	/* Initialize Port B IIC pins.
-	*/
-	cp->cp_pbpar |= 0x00000030;
-	cp->cp_pbdir |= 0x00000030;
-	cp->cp_pbodr |= 0x00000030;
-
-	/* Allocate space for two transmit and two receive buffer
-	 * descriptors in the DP ram.
-	 */
-	data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8);
-		
-	/* ptr to i2c area */
-	data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c);
-}
-
-static int rpx_install_isr(int irq, void (*func)(void *), void *data)
-{
-	/* install interrupt handler */
-	cpm_install_handler(irq, func, data);
-
-	return 0;
-}
-
-static struct i2c_algo_8xx_data rpx_data = {
-	.setisr = rpx_install_isr
-};
-
-static struct i2c_adapter rpx_ops = {
-	.owner		= THIS_MODULE,
-	.name		= "m8xx",
-	.id		= I2C_HW_MPC8XX_EPON,
-	.algo_data	= &rpx_data,
-};
-
-int __init i2c_rpx_init(void)
-{
-	printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n");
-
-	/* reset hardware to sane state */
-	rpx_iic_init(&rpx_data);
-
-	if (i2c_8xx_add_bus(&rpx_ops) < 0) {
-		printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-void __exit i2c_rpx_exit(void)
-{
-	i2c_8xx_del_bus(&rpx_ops);
-}
-
-MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards");
-
-module_init(i2c_rpx_init);
-module_exit(i2c_rpx_exit);