diff options
Diffstat (limited to 'drivers/i2c')
29 files changed, 485 insertions, 523 deletions
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig index 58899078810b..014dfa575be7 100644 --- a/drivers/i2c/algos/Kconfig +++ b/drivers/i2c/algos/Kconfig @@ -34,10 +34,6 @@ config I2C_ALGOPCA This support is also available as a module. If so, the module will be called i2c-algo-pca. -config I2C_ALGO8XX - tristate "MPC8xx CPM I2C interface" - depends on 8xx - config I2C_ALGO_SGI tristate "I2C SGI interfaces" depends on SGI_IP22 || SGI_IP32 || X86_VISWS diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 8a5f5825bb72..7f0a0a62cf60 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -357,13 +357,29 @@ static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) return wrcount; } +static int acknak(struct i2c_adapter *i2c_adap, int is_ack) +{ + struct i2c_algo_bit_data *adap = i2c_adap->algo_data; + + /* assert: sda is high */ + if (is_ack) /* send ack */ + setsda(adap, 0); + udelay((adap->udelay + 1) / 2); + if (sclhi(adap) < 0) { /* timeout */ + dev_err(&i2c_adap->dev, "readbytes: ack/nak timeout\n"); + return -ETIMEDOUT; + } + scllo(adap); + return 0; +} + static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) { int inval; int rdcount=0; /* counts bytes read */ - struct i2c_algo_bit_data *adap = i2c_adap->algo_data; unsigned char *temp = msg->buf; int count = msg->len; + const unsigned flags = msg->flags; while (count > 0) { inval = i2c_inb(i2c_adap); @@ -377,28 +393,12 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) temp++; count--; - if (msg->flags & I2C_M_NO_RD_ACK) { - bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x\n", - inval); - continue; - } - - /* assert: sda is high */ - if (count) /* send ack */ - setsda(adap, 0); - udelay((adap->udelay + 1) / 2); - bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x %s\n", inval, - count ? "A" : "NA"); - if (sclhi(adap)<0) { /* timeout */ - dev_err(&i2c_adap->dev, "readbytes: timeout at ack\n"); - return -ETIMEDOUT; - }; - scllo(adap); - /* Some SMBus transactions require that we receive the transaction length as the first read byte. */ - if (rdcount == 1 && (msg->flags & I2C_M_RECV_LEN)) { + if (rdcount == 1 && (flags & I2C_M_RECV_LEN)) { if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) { + if (!(flags & I2C_M_NO_RD_ACK)) + acknak(i2c_adap, 0); dev_err(&i2c_adap->dev, "readbytes: invalid " "block length (%d)\n", inval); return -EREMOTEIO; @@ -409,6 +409,18 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) count += inval; msg->len += inval; } + + bit_dbg(2, &i2c_adap->dev, "readbytes: 0x%02x %s\n", + inval, + (flags & I2C_M_NO_RD_ACK) + ? "(no ack/nak)" + : (count ? "A" : "NA")); + + if (!(flags & I2C_M_NO_RD_ACK)) { + inval = acknak(i2c_adap, count); + if (inval < 0) + return inval; + } } return rdcount; } diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 781d44becf30..f29bd8752998 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -92,9 +92,9 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" - depends on BF534 || BF536 || BF537 + depends on BF534 || BF536 || BF537 || BF54x help - This is the TWI I2C device driver for Blackfin 534/536/537. + This is the TWI I2C device driver for Blackfin 534/536/537/54x. This driver can also be built as a module. If so, the module will be called i2c-bfin-twi. @@ -207,6 +207,8 @@ config I2C_PIIX4 ATI IXP300 ATI IXP400 ATI SB600 + ATI SB700 + ATI SB800 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 @@ -236,9 +238,6 @@ config I2C_IOP3XX This driver can also be built as a module. If so, the module will be called i2c-iop3xx. -config I2C_ISA - tristate - config I2C_IXP4XX tristate "IXP4xx GPIO-Based I2C Interface (DEPRECATED)" depends on ARCH_IXP4XX @@ -399,11 +398,6 @@ config I2C_PROSAVAGE This support is also available as a module. If so, the module will be called i2c-prosavage. -config I2C_RPXLITE - tristate "Embedded Planet RPX Lite/Classic support" - depends on RPXLITE || RPXCLASSIC - select I2C_ALGO8XX - config I2C_S3C2410 tristate "S3C2410 I2C Driver" depends on ARCH_S3C2410 @@ -521,6 +515,22 @@ config I2C_SIS96X This driver can also be built as a module. If so, the module will be called i2c-sis96x. +config I2C_TAOS_EVM + tristate "TAOS evaluation module" + depends on EXPERIMENTAL + select SERIO + select SERIO_SERPORT + default n + help + This supports TAOS evaluation modules on serial port. In order to + use this driver, you will need the inputattach tool, which is part + of the input-utils package. + + If unsure, say N. + + This support is also available as a module. If so, the module + will be called i2c-taos-evm. + config I2C_STUB tristate "I2C/SMBus Test Stub" depends on EXPERIMENTAL && m @@ -557,7 +567,7 @@ config I2C_VERSATILE will be called i2c-versatile. config I2C_ACORN - bool "Acorn IOC/IOMD I2C bus support" + tristate "Acorn IOC/IOMD I2C bus support" depends on ARCH_ACORN default y select I2C_ALGOBIT @@ -644,4 +654,13 @@ config I2C_PNX This driver can also be built as a module. If so, the module will be called i2c-pnx. +config I2C_PMCMSP + tristate "PMC MSP I2C TWI Controller" + depends on PMC_MSP + help + This driver supports the PMC TWI controller on MSP devices. + + This driver can also be built as module. If so, the module + will be called i2c-pmcmsp. + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 6e82b3fab2eb..c6aa7f463b71 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_I2C_I801) += i2c-i801.o obj-$(CONFIG_I2C_I810) += i2c-i810.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o -obj-$(CONFIG_I2C_ISA) += i2c-isa.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o @@ -32,10 +31,10 @@ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o +obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o -obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o @@ -44,6 +43,7 @@ obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o obj-$(CONFIG_I2C_STUB) += i2c-stub.o +obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 09bd7f40b90c..7c2be3558a24 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -94,4 +94,4 @@ static int __init i2c_ioc_init(void) return i2c_bit_add_bus(&ioc_ops); } -__initcall(i2c_ioc_init); +module_init(i2c_ioc_init); diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index a7dd54654a9a..44e1cd21bb01 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -63,14 +63,14 @@ static void i2c_gpio_setscl_val(void *data, int state) gpio_set_value(pdata->scl_pin, state); } -int i2c_gpio_getsda(void *data) +static int i2c_gpio_getsda(void *data) { struct i2c_gpio_platform_data *pdata = data; return gpio_get_value(pdata->sda_pin); } -int i2c_gpio_getscl(void *data) +static int i2c_gpio_getscl(void *data) { struct i2c_gpio_platform_data *pdata = data; @@ -142,7 +142,13 @@ static int __init i2c_gpio_probe(struct platform_device *pdev) adap->algo_data = bit_data; adap->dev.parent = &pdev->dev; - ret = i2c_bit_add_bus(adap); + /* + * If "dev->id" is negative we consider it as zero. + * The reason to do so is to avoid sysfs names that only make + * sense when there are multiple adapters. + */ + adap->nr = (pdev->id != -1) ? pdev->id : 0; + ret = i2c_bit_add_numbered_bus(adap); if (ret) goto err_add_bus; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 611b57192c96..289816db52ae 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -22,12 +22,12 @@ /* SUPPORTED DEVICES PCI ID - 82801AA 2413 - 82801AB 2423 - 82801BA 2443 - 82801CA/CAM 2483 - 82801DB 24C3 (HW PEC supported, 32 byte buffer not supported) - 82801EB 24D3 (HW PEC supported, 32 byte buffer not supported) + 82801AA 2413 + 82801AB 2423 + 82801BA 2443 + 82801CA/CAM 2483 + 82801DB 24C3 (HW PEC supported) + 82801EB 24D3 (HW PEC supported) 6300ESB 25A4 ICH6 266A ICH7 27DA @@ -74,6 +74,13 @@ #define SMBHSTCFG_SMB_SMI_EN 2 #define SMBHSTCFG_I2C_EN 4 +/* Auxillary control register bits, ICH4+ only */ +#define SMBAUXCTL_CRC 1 +#define SMBAUXCTL_E32B 2 + +/* kill bit for SMBHSTCNT */ +#define SMBHSTCNT_KILL 2 + /* Other settings */ #define MAX_TIMEOUT 100 #define ENABLE_INT9 0 /* set to 0x01 to enable - untested */ @@ -91,10 +98,15 @@ #define I801_START 0x40 #define I801_PEC_EN 0x80 /* ICH4 only */ - -static int i801_transaction(void); -static int i801_block_transaction(union i2c_smbus_data *data, char read_write, - int command, int hwpec); +/* I801 Hosts Status register bits */ +#define SMBHSTSTS_BYTE_DONE 0x80 +#define SMBHSTSTS_INUSE_STS 0x40 +#define SMBHSTSTS_SMBALERT_STS 0x20 +#define SMBHSTSTS_FAILED 0x10 +#define SMBHSTSTS_BUS_ERR 0x08 +#define SMBHSTSTS_DEV_ERR 0x04 +#define SMBHSTSTS_INTR 0x02 +#define SMBHSTSTS_HOST_BUSY 0x01 static unsigned long i801_smba; static unsigned char i801_original_hstcfg; @@ -102,7 +114,7 @@ static struct pci_driver i801_driver; static struct pci_dev *I801_dev; static int isich4; -static int i801_transaction(void) +static int i801_transaction(int xact) { int temp; int result = 0; @@ -127,33 +139,40 @@ static int i801_transaction(void) } } - outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT); + /* the current contents of SMBHSTCNT can be overwritten, since PEC, + * INTREN, SMBSCMD are passed in xact */ + outb_p(xact | I801_START, SMBHSTCNT); /* We will always wait for a fraction of a second! */ do { msleep(1); temp = inb_p(SMBHSTSTS); - } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); + } while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); result = -1; + /* try to stop the current command */ + dev_dbg(&I801_dev->dev, "Terminating the current operation\n"); + outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT); + msleep(1); + outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT); } - if (temp & 0x10) { + if (temp & SMBHSTSTS_FAILED) { result = -1; dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); } - if (temp & 0x08) { + if (temp & SMBHSTSTS_BUS_ERR) { result = -1; dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked " "until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } - if (temp & 0x04) { + if (temp & SMBHSTSTS_DEV_ERR) { result = -1; dev_dbg(&I801_dev->dev, "Error: no response!\n"); } @@ -172,44 +191,70 @@ static int i801_transaction(void) return result; } -/* All-inclusive block transaction function */ -static int i801_block_transaction(union i2c_smbus_data *data, char read_write, - int command, int hwpec) +/* wait for INTR bit as advised by Intel */ +static void i801_wait_hwpec(void) +{ + int timeout = 0; + int temp; + + do { + msleep(1); + temp = inb_p(SMBHSTSTS); + } while ((!(temp & SMBHSTSTS_INTR)) + && (timeout++ < MAX_TIMEOUT)); + + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); + } + outb_p(temp, SMBHSTSTS); +} + +static int i801_block_transaction_by_block(union i2c_smbus_data *data, + char read_write, int hwpec) +{ + int i, len; + + inb_p(SMBHSTCNT); /* reset the data buffer index */ + + /* Use 32-byte buffer to process this transaction */ + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + outb_p(len, SMBHSTDAT0); + for (i = 0; i < len; i++) + outb_p(data->block[i+1], SMBBLKDAT); + } + + if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 | + I801_PEC_EN * hwpec)) + return -1; + + if (read_write == I2C_SMBUS_READ) { + len = inb_p(SMBHSTDAT0); + if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) + return -1; + + data->block[0] = len; + for (i = 0; i < len; i++) + data->block[i + 1] = inb_p(SMBBLKDAT); + } + return 0; +} + +static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, + char read_write, int hwpec) { int i, len; int smbcmd; int temp; int result = 0; int timeout; - unsigned char hostc, errmask; + unsigned char errmask; - if (command == I2C_SMBUS_I2C_BLOCK_DATA) { - if (read_write == I2C_SMBUS_WRITE) { - /* set I2C_EN bit in configuration register */ - pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc); - pci_write_config_byte(I801_dev, SMBHSTCFG, - hostc | SMBHSTCFG_I2C_EN); - } else { - dev_err(&I801_dev->dev, - "I2C_SMBUS_I2C_BLOCK_READ not DB!\n"); - return -1; - } - } + len = data->block[0]; if (read_write == I2C_SMBUS_WRITE) { - len = data->block[0]; - if (len < 1) - len = 1; - if (len > 32) - len = 32; outb_p(len, SMBHSTDAT0); outb_p(data->block[1], SMBBLKDAT); - } else { - len = 32; /* max for reads */ - } - - if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) { - /* set 32 byte buffer */ } for (i = 1; i <= len; i++) { @@ -227,13 +272,13 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, /* Make sure the SMBus host is ready to start transmitting */ temp = inb_p(SMBHSTSTS); if (i == 1) { - /* Erronenous conditions before transaction: + /* Erroneous conditions before transaction: * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ - errmask=0x9f; + errmask = 0x9f; } else { - /* Erronenous conditions during transaction: + /* Erroneous conditions during transaction: * Failed, Bus_Err, Dev_Err, Intr */ - errmask=0x1e; + errmask = 0x1e; } if (temp & errmask) { dev_dbg(&I801_dev->dev, "SMBus busy (%02x). " @@ -242,14 +287,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) { dev_err(&I801_dev->dev, "Reset failed! (%02x)\n", temp); - result = -1; - goto END; + return -1; } - if (i != 1) { + if (i != 1) /* if die in middle of block transaction, fail */ - result = -1; - goto END; - } + return -1; } if (i == 1) @@ -261,33 +303,38 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, msleep(1); temp = inb_p(SMBHSTSTS); } - while ((!(temp & 0x80)) - && (timeout++ < MAX_TIMEOUT)); + while ((!(temp & SMBHSTSTS_BYTE_DONE)) + && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { + /* try to stop the current command */ + dev_dbg(&I801_dev->dev, "Terminating the current " + "operation\n"); + outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT); + msleep(1); + outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), + SMBHSTCNT); result = -1; dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); } - if (temp & 0x10) { + if (temp & SMBHSTSTS_FAILED) { result = -1; dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); - } else if (temp & 0x08) { + } else if (temp & SMBHSTSTS_BUS_ERR) { result = -1; dev_err(&I801_dev->dev, "Bus collision!\n"); - } else if (temp & 0x04) { + } else if (temp & SMBHSTSTS_DEV_ERR) { result = -1; dev_dbg(&I801_dev->dev, "Error: no response!\n"); } if (i == 1 && read_write == I2C_SMBUS_READ) { len = inb_p(SMBHSTDAT0); - if (len < 1) - len = 1; - if (len > 32) - len = 32; + if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) + return -1; data->block[0] = len; } @@ -310,25 +357,58 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT)); if (result < 0) - goto END; + return result; } + return result; +} - if (hwpec) { - /* wait for INTR bit as advised by Intel */ - timeout = 0; - do { - msleep(1); - temp = inb_p(SMBHSTSTS); - } while ((!(temp & 0x02)) - && (timeout++ < MAX_TIMEOUT)); +static int i801_set_block_buffer_mode(void) +{ + outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL); + if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0) + return -1; + return 0; +} - if (timeout >= MAX_TIMEOUT) { - dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); +/* Block transaction function */ +static int i801_block_transaction(union i2c_smbus_data *data, char read_write, + int command, int hwpec) +{ + int result = 0; + unsigned char hostc; + + if (command == I2C_SMBUS_I2C_BLOCK_DATA) { + if (read_write == I2C_SMBUS_WRITE) { + /* set I2C_EN bit in configuration register */ + pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc); + pci_write_config_byte(I801_dev, SMBHSTCFG, + hostc | SMBHSTCFG_I2C_EN); + } else { + dev_err(&I801_dev->dev, + "I2C_SMBUS_I2C_BLOCK_READ not DB!\n"); + return -1; } - outb_p(temp, SMBHSTSTS); } - result = 0; -END: + + if (read_write == I2C_SMBUS_WRITE) { + if (data->block[0] < 1) + data->block[0] = 1; + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) + data->block[0] = I2C_SMBUS_BLOCK_MAX; + } else { + data->block[0] = 32; /* max for reads */ + } + + if (isich4 && i801_set_block_buffer_mode() == 0 ) + result = i801_block_transaction_by_block(data, read_write, + hwpec); + else + result = i801_block_transaction_byte_by_byte(data, read_write, + hwpec); + + if (result == 0 && hwpec) + i801_wait_hwpec(); + if (command == I2C_SMBUS_I2C_BLOCK_DATA) { /* restore saved configuration register value */ pci_write_config_byte(I801_dev, SMBHSTCFG, hostc); @@ -393,19 +473,22 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, return -1; } - outb_p(hwpec, SMBAUXCTL); /* enable/disable hardware PEC */ + if (hwpec) /* enable/disable hardware PEC */ + outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL); + else + outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL); if(block) ret = i801_block_transaction(data, read_write, size, hwpec); - else { - outb_p(xact | ENABLE_INT9, SMBHSTCNT); - ret = i801_transaction(); - } + else + ret = i801_transaction(xact | ENABLE_INT9); /* Some BIOSes don't like it when PEC is enabled at reboot or resume - time, so we forcibly disable it after every transaction. */ + time, so we forcibly disable it after every transaction. Turn off + E32B for the same reason. */ if (hwpec) - outb_p(0, SMBAUXCTL); + outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), + SMBAUXCTL); if(block) return ret; diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 90e2d9350c1b..ace644e21b14 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -490,7 +490,9 @@ iop3xx_i2c_probe(struct platform_device *pdev) memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); new_adapter->id = I2C_HW_IOP3XX; new_adapter->owner = THIS_MODULE; + new_adapter->class = I2C_CLASS_HWMON; new_adapter->dev.parent = &pdev->dev; + new_adapter->nr = pdev->id; /* * Default values...should these come in from board code? @@ -508,7 +510,7 @@ iop3xx_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, new_adapter); new_adapter->algo_data = adapter_data; - i2c_add_adapter(new_adapter); + i2c_add_numbered_adapter(new_adapter); return 0; diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c deleted file mode 100644 index b0e1370075de..000000000000 --- a/drivers/i2c/busses/i2c-isa.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - i2c-isa.c - an i2c-core-like thing for ISA hardware monitoring chips - Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> - - Based on the i2c-isa pseudo-adapter from the lm_sensors project - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* This implements an i2c-core-like thing for ISA hardware monitoring - chips. Such chips are linked to the i2c subsystem for historical - reasons (because the early ISA hardware monitoring chips such as the - LM78 had both an I2C and an ISA interface). They used to be - registered with the main i2c-core, but as a first step in the - direction of a clean separation between I2C and ISA chip drivers, - we now have this separate core for ISA ones. It is significantly - more simple than the real one, of course, because we don't have to - handle multiple busses: there is only one (fake) ISA adapter. - It is worth noting that we still rely on i2c-core for some things - at the moment - but hopefully this won't last. */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/i2c.h> -#include <linux/i2c-isa.h> -#include <linux/platform_device.h> -#include <linux/completion.h> - -/* Exported by i2c-core for i2c-isa only */ -extern void i2c_adapter_dev_release(struct device *dev); -extern struct class i2c_adapter_class; - -static u32 isa_func(struct i2c_adapter *adapter); - -/* This is the actual algorithm we define */ -static const struct i2c_algorithm isa_algorithm = { - .functionality = isa_func, -}; - -/* There can only be one... */ -static struct i2c_adapter isa_adapter = { - .owner = THIS_MODULE, - .id = I2C_HW_ISA, - .class = I2C_CLASS_HWMON, - .algo = &isa_algorithm, - .name = "ISA main adapter", -}; - -/* We can't do a thing... */ -static u32 isa_func(struct i2c_adapter *adapter) -{ - return 0; -} - - -/* We implement an interface which resembles i2c_{add,del}_driver, - but for i2c-isa drivers. We don't have to remember and handle lists - of drivers and adapters so this is much more simple, of course. */ - -int i2c_isa_add_driver(struct i2c_driver *driver) -{ - int res; - - /* Add the driver to the list of i2c drivers in the driver core */ - driver->driver.bus = &i2c_bus_type; - res = driver_register(&driver->driver); - if (res) - return res; - dev_dbg(&isa_adapter.dev, "Driver %s registered\n", driver->driver.name); - - /* Now look for clients */ - res = driver->attach_adapter(&isa_adapter); - if (res) { - dev_dbg(&isa_adapter.dev, - "Driver %s failed to attach adapter, unregistering\n", - driver->driver.name); - driver_unregister(&driver->driver); - } - return res; -} - -int i2c_isa_del_driver(struct i2c_driver *driver) -{ - struct list_head *item, *_n; - struct i2c_client *client; - int res; - - /* Detach all clients belonging to this one driver */ - list_for_each_safe(item, _n, &isa_adapter.clients) { - client = list_entry(item, struct i2c_client, list); - if (client->driver != driver) - continue; - dev_dbg(&isa_adapter.dev, "Detaching client %s at 0x%x\n", - client->name, client->addr); - if ((res = driver->detach_client(client))) { - dev_err(&isa_adapter.dev, "Failed, driver " - "%s not unregistered!\n", - driver->driver.name); - return res; - } - } - - /* Get the driver off the core list */ - driver_unregister(&driver->driver); - dev_dbg(&isa_adapter.dev, "Driver %s unregistered\n", driver->driver.name); - - return 0; -} - - -static int __init i2c_isa_init(void) -{ - int err; - - mutex_init(&isa_adapter.clist_lock); - INIT_LIST_HEAD(&isa_adapter.clients); - - isa_adapter.nr = ANY_I2C_ISA_BUS; - isa_adapter.dev.parent = &platform_bus; - sprintf(isa_adapter.dev.bus_id, "i2c-%d", isa_adapter.nr); - isa_adapter.dev.release = &i2c_adapter_dev_release; - isa_adapter.dev.class = &i2c_adapter_class; - err = device_register(&isa_adapter.dev); - if (err) { - printk(KERN_ERR "i2c-isa: Failed to register device\n"); - goto exit; - } - - dev_dbg(&isa_adapter.dev, "%s registered\n", isa_adapter.name); - - return 0; - -exit: - return err; -} - -static void __exit i2c_isa_exit(void) -{ -#ifdef DEBUG - struct list_head *item, *_n; - struct i2c_client *client = NULL; -#endif - - /* There should be no more active client */ -#ifdef DEBUG - dev_dbg(&isa_adapter.dev, "Looking for clients\n"); - list_for_each_safe(item, _n, &isa_adapter.clients) { - client = list_entry(item, struct i2c_client, list); - dev_err(&isa_adapter.dev, "Driver %s still has an active " - "ISA client at 0x%x\n", client->driver->driver.name, - client->addr); - } - if (client != NULL) - return; -#endif - - /* Clean up the sysfs representation */ - dev_dbg(&isa_adapter.dev, "Unregistering from sysfs\n"); - init_completion(&isa_adapter.dev_released); - device_unregister(&isa_adapter.dev); - - /* Wait for sysfs to drop all references */ - dev_dbg(&isa_adapter.dev, "Waiting for sysfs completion\n"); - wait_for_completion(&isa_adapter.dev_released); - - dev_dbg(&isa_adapter.dev, "%s unregistered\n", isa_adapter.name); -} - -EXPORT_SYMBOL(i2c_isa_add_driver); -EXPORT_SYMBOL(i2c_isa_del_driver); - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("ISA bus access through i2c"); -MODULE_LICENSE("GPL"); - -module_init(i2c_isa_init); -module_exit(i2c_isa_exit); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index c6b6898592b1..d8de4ac88b7d 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -74,6 +74,25 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) return IRQ_HANDLED; } +/* Sometimes 9th clock pulse isn't generated, and slave doesn't release + * the bus, because it wants to send ACK. + * Following sequence of enabling/disabling and sending start/stop generates + * the pulse, so it's all OK. + */ +static void mpc_i2c_fixup(struct mpc_i2c *i2c) +{ + writeccr(i2c, 0); + udelay(30); + writeccr(i2c, CCR_MEN); + udelay(30); + writeccr(i2c, CCR_MSTA | CCR_MTX); + udelay(30); + writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); + udelay(30); + writeccr(i2c, CCR_MEN); + udelay(30); +} + static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) { unsigned long orig_jiffies = jiffies; @@ -86,6 +105,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) schedule(); if (time_after(jiffies, orig_jiffies + timeout)) { pr_debug("I2C: timeout\n"); + writeccr(i2c, 0); result = -EIO; break; } @@ -97,10 +117,12 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) result = wait_event_interruptible_timeout(i2c->queue, (i2c->interrupt & CSR_MIF), timeout * HZ); - if (unlikely(result < 0)) + if (unlikely(result < 0)) { pr_debug("I2C: wait interrupted\n"); - else if (unlikely(!(i2c->interrupt & CSR_MIF))) { + writeccr(i2c, 0); + } else if (unlikely(!(i2c->interrupt & CSR_MIF))) { pr_debug("I2C: wait timeout\n"); + writeccr(i2c, 0); result = -ETIMEDOUT; } @@ -241,10 +263,14 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { if (signal_pending(current)) { pr_debug("I2C: Interrupted\n"); + writeccr(i2c, 0); return -EINTR; } if (time_after(jiffies, orig_jiffies + HZ)) { pr_debug("I2C: timeout\n"); + if (readb(i2c->base + MPC_I2C_SR) == + (CSR_MCF | CSR_MBB | CSR_RXAK)) + mpc_i2c_fixup(i2c); return -EIO; } schedule(); @@ -327,9 +353,10 @@ static int fsl_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); i2c->adap = mpc_ops; + i2c->adap.nr = pdev->id; i2c_set_adapdata(&i2c->adap, i2c); i2c->adap.dev.parent = &pdev->dev; - if ((result = i2c_add_adapter(&i2c->adap)) < 0) { + if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) { printk(KERN_ERR "i2c-mpc - failed to add adapter\n"); goto fail_add; } @@ -338,7 +365,7 @@ static int fsl_i2c_probe(struct platform_device *pdev) fail_add: if (i2c->irq != 0) - free_irq(i2c->irq, NULL); + free_irq(i2c->irq, i2c); fail_irq: iounmap(i2c->base); fail_map: diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index a55b3335d1be..bb7bf68a7fb6 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -107,6 +107,21 @@ struct mv64xxx_i2c_data { * ***************************************************************************** */ + +/* Reset hardware and initialize FSM */ +static void +mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data) +{ + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET); + writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)), + drv_data->reg_base + MV64XXX_I2C_REG_BAUD); + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR); + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR); + writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->state = MV64XXX_I2C_STATE_IDLE; +} + static void mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) { @@ -203,7 +218,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) drv_data->state, status, drv_data->msg->addr, drv_data->msg->flags); drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; - drv_data->state = MV64XXX_I2C_STATE_IDLE; + mv64xxx_i2c_hw_init(drv_data); drv_data->rc = -EIO; } } @@ -367,6 +382,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) "mv64xxx: I2C bus locked, block: %d, " "time_left: %d\n", drv_data->block, (int)time_left); + mv64xxx_i2c_hw_init(drv_data); } } else spin_unlock_irqrestore(&drv_data->lock, flags); @@ -443,19 +459,6 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = { * ***************************************************************************** */ -static void __devinit -mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data) -{ - writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET); - writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)), - drv_data->reg_base + MV64XXX_I2C_REG_BAUD); - writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR); - writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR); - writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP, - drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); - drv_data->state = MV64XXX_I2C_STATE_IDLE; -} - static int __devinit mv64xxx_i2c_map_regs(struct platform_device *pd, struct mv64xxx_i2c_data *drv_data) @@ -527,6 +530,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) drv_data->adapter.class = I2C_CLASS_HWMON; drv_data->adapter.timeout = pdata->timeout; drv_data->adapter.retries = pdata->retries; + drv_data->adapter.nr = pd->id; platform_set_drvdata(pd, drv_data); i2c_set_adapdata(&drv_data->adapter, drv_data); @@ -539,7 +543,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) drv_data->irq); rc = -EINVAL; goto exit_unmap_regs; - } else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) { + } else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) { dev_err(&drv_data->adapter.dev, "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc); goto exit_free_irq; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 3cd0d63e7b50..c48140f782d0 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -61,6 +61,7 @@ struct nforce2_smbus { struct i2c_adapter adapter; int base; int size; + int blockops; }; @@ -80,6 +81,8 @@ struct nforce2_smbus { #define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */ #define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */ #define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */ +#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data + bytes */ #define NVIDIA_SMB_STS_DONE 0x80 #define NVIDIA_SMB_STS_ALRM 0x40 @@ -92,6 +95,7 @@ struct nforce2_smbus { #define NVIDIA_SMB_PRTCL_BYTE 0x04 #define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06 #define NVIDIA_SMB_PRTCL_WORD_DATA 0x08 +#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a #define NVIDIA_SMB_PRTCL_PEC 0x80 static struct pci_driver nforce2_driver; @@ -103,6 +107,8 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, { struct nforce2_smbus *smbus = adap->algo_data; unsigned char protocol, pec, temp; + u8 len; + int i; protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ : NVIDIA_SMB_PRTCL_WRITE; @@ -137,6 +143,25 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec; break; + case I2C_SMBUS_BLOCK_DATA: + outb_p(command, NVIDIA_SMB_CMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX)) { + dev_err(&adap->dev, + "Transaction failed " + "(requested block size: %d)\n", + len); + return -1; + } + outb_p(len, NVIDIA_SMB_BCNT); + for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++) + outb_p(data->block[i + 1], + NVIDIA_SMB_DATA+i); + } + protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec; + break; + default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); return -1; @@ -174,6 +199,14 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, case I2C_SMBUS_WORD_DATA: data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8); break; + + case I2C_SMBUS_BLOCK_DATA: + len = inb_p(NVIDIA_SMB_BCNT); + len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX); + for (i = 0; i < len; i++) + data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i); + data->block[0] = len; + break; } return 0; @@ -184,7 +217,9 @@ static u32 nforce2_func(struct i2c_adapter *adapter) { /* other functionality might be possible, but is not tested */ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA; + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + (((struct nforce2_smbus*)adapter->algo_data)->blockops ? + I2C_FUNC_SMBUS_BLOCK_DATA : 0); } static struct i2c_algorithm smbus_algorithm = { @@ -268,6 +303,13 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ return -ENOMEM; pci_set_drvdata(dev, smbuses); + switch(dev->device) { + case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS: + case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS: + smbuses[0].blockops = 1; + smbuses[1].blockops = 1; + } + /* SMBus adapter 1 */ res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1"); if (res1 < 0) { diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 5a52bf5e3fb0..167e4137ee21 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -23,7 +23,7 @@ Supports: Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000 - ATI IXP200, IXP300, IXP400, SB600 + ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -397,7 +397,7 @@ static struct pci_device_id piix4_ids[] = { .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS), .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SMBUS), + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4), .driver_data = 0 }, diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 1425d2245c82..0ab4f2627c26 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -121,8 +121,7 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap, if (rc) goto bail; rc = pmac_i2c_xfer(bus, addrdir, 1, command, - read ? data->block : &data->block[1], - data->block[0]); + &data->block[1], data->block[0]); break; default: diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 28e7b91a4553..bb5466b27b59 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -921,7 +921,14 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.class = plat->class; } - ret = i2c_add_adapter(&i2c->adap); + /* + * If "dev->id" is negative we consider it as zero. + * The reason to do so is to avoid sysfs names that only make + * sense when there are multiple adapters. + */ + i2c->adap.nr = dev->id != -1 ? dev->id : 0; + + ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { printk(KERN_INFO "I2C: Failed to add bus\n"); goto eadapt; diff --git a/drivers/i2c/busses/i2c-rpx.c b/drivers/i2c/busses/i2c-rpx.c deleted file mode 100644 index 8764df06f51d..000000000000 --- a/drivers/i2c/busses/i2c-rpx.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Embedded Planet RPX Lite MPC8xx CPM I2C interface. - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net). - * - * moved into proper i2c interface; - * Brad Parker (brad@heeltoe.com) - * - * RPX lite specific parts of the i2c interface - * Update: There actually isn't anything RPXLite-specific about this module. - * This should work for most any 8xx board. The console messages have been - * changed to eliminate RPXLite references. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/stddef.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-8xx.h> -#include <asm/mpc8xx.h> -#include <asm/commproc.h> - - -static void -rpx_iic_init(struct i2c_algo_8xx_data *data) -{ - volatile cpm8xx_t *cp; - volatile immap_t *immap; - - cp = cpmp; /* Get pointer to Communication Processor */ - immap = (immap_t *)IMAP_ADDR; /* and to internal registers */ - - data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; - - /* Check for and use a microcode relocation patch. - */ - if ((data->reloc = data->iip->iic_rpbase)) - data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase]; - - data->i2c = (i2c8xx_t *)&(immap->im_i2c); - data->cp = cp; - - /* Initialize Port B IIC pins. - */ - cp->cp_pbpar |= 0x00000030; - cp->cp_pbdir |= 0x00000030; - cp->cp_pbodr |= 0x00000030; - - /* Allocate space for two transmit and two receive buffer - * descriptors in the DP ram. - */ - data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8); - - /* ptr to i2c area */ - data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c); -} - -static int rpx_install_isr(int irq, void (*func)(void *), void *data) -{ - /* install interrupt handler */ - cpm_install_handler(irq, func, data); - - return 0; -} - -static struct i2c_algo_8xx_data rpx_data = { - .setisr = rpx_install_isr -}; - -static struct i2c_adapter rpx_ops = { - .owner = THIS_MODULE, - .name = "m8xx", - .id = I2C_HW_MPC8XX_EPON, - .algo_data = &rpx_data, -}; - -int __init i2c_rpx_init(void) -{ - printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n"); - - /* reset hardware to sane state */ - rpx_iic_init(&rpx_data); - - if (i2c_8xx_add_bus(&rpx_ops) < 0) { - printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n"); - return -ENODEV; - } - - return 0; -} - -void __exit i2c_rpx_exit(void) -{ - i2c_8xx_del_bus(&rpx_ops); -} - -MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>"); -MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards"); - -module_init(i2c_rpx_init); -module_exit(i2c_rpx_exit); diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index e4540fcf6476..c44ada5f4292 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -39,8 +39,8 @@ #include <asm/io.h> #include <asm/arch/regs-gpio.h> -#include <asm/arch/regs-iic.h> -#include <asm/arch/iic.h> +#include <asm/plat-s3c/regs-iic.h> +#include <asm/plat-s3c/iic.h> /* i2c controller state */ diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index b7fb65c30112..8adf4abaa035 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -25,8 +25,6 @@ /* This interfaces to the I2C bus of the Savage4 to gain access to the BT869 and possibly other I2C devices. The DDC bus is not yet supported because its register is not memory-mapped. - However we leave the DDC code here, commented out, to make - it easier to add later. */ #include <linux/kernel.h> @@ -37,36 +35,19 @@ #include <linux/i2c-algo-bit.h> #include <asm/io.h> -/* 3DFX defines */ -#define PCI_CHIP_SAVAGE3D 0x8A20 -#define PCI_CHIP_SAVAGE3D_MV 0x8A21 +/* device IDs */ #define PCI_CHIP_SAVAGE4 0x8A22 #define PCI_CHIP_SAVAGE2000 0x9102 -#define PCI_CHIP_PROSAVAGE_PM 0x8A25 -#define PCI_CHIP_PROSAVAGE_KM 0x8A26 -#define PCI_CHIP_SAVAGE_MX_MV 0x8c10 -#define PCI_CHIP_SAVAGE_MX 0x8c11 -#define PCI_CHIP_SAVAGE_IX_MV 0x8c12 -#define PCI_CHIP_SAVAGE_IX 0x8c13 #define REG 0xff20 /* Serial Port 1 Register */ /* bit locations in the register */ -#define DDC_ENAB 0x00040000 -#define DDC_SCL_OUT 0x00080000 -#define DDC_SDA_OUT 0x00100000 -#define DDC_SCL_IN 0x00200000 -#define DDC_SDA_IN 0x00400000 #define I2C_ENAB 0x00000020 #define I2C_SCL_OUT 0x00000001 #define I2C_SDA_OUT 0x00000002 #define I2C_SCL_IN 0x00000008 #define I2C_SDA_IN 0x00000010 -/* initialization states */ -#define INIT2 0x20 -#define INIT3 0x04 - /* delays */ #define CYCLE_DELAY 10 #define TIMEOUT (HZ / 2) diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index a6feed449dbe..283769cecee2 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -129,6 +129,7 @@ MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller" static struct pci_driver sis5595_driver; static unsigned short sis5595_base; +static struct pci_dev *sis5595_pdev; static u8 sis5595_read(u8 reg) { @@ -379,6 +380,8 @@ MODULE_DEVICE_TABLE (pci, sis5595_ids); static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id) { + int err; + if (sis5595_setup(dev)) { dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n"); return -ENODEV; @@ -389,20 +392,24 @@ static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_ sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x", sis5595_base + SMB_INDEX); - return i2c_add_adapter(&sis5595_adapter); -} + err = i2c_add_adapter(&sis5595_adapter); + if (err) { + release_region(sis5595_base + SMB_INDEX, 2); + return err; + } -static void __devexit sis5595_remove(struct pci_dev *dev) -{ - i2c_del_adapter(&sis5595_adapter); - release_region(sis5595_base + SMB_INDEX, 2); + /* Always return failure here. This is to allow other drivers to bind + * to this pci device. We don't really want to have control over the + * pci device, we only wanted to read as few register values from it. + */ + sis5595_pdev = pci_dev_get(dev); + return -ENODEV; } static struct pci_driver sis5595_driver = { .name = "sis5595_smbus", .id_table = sis5595_ids, .probe = sis5595_probe, - .remove = __devexit_p(sis5595_remove), }; static int __init i2c_sis5595_init(void) @@ -413,6 +420,12 @@ static int __init i2c_sis5595_init(void) static void __exit i2c_sis5595_exit(void) { pci_unregister_driver(&sis5595_driver); + if (sis5595_pdev) { + i2c_del_adapter(&sis5595_adapter); + release_region(sis5595_base + SMB_INDEX, 2); + pci_dev_put(sis5595_pdev); + sis5595_pdev = NULL; + } } MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 7a2bc06304fc..edc275002f80 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -235,7 +235,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, if (!(vt596_features & FEATURE_I2CBLOCK)) goto exit_unsupported; if (read_write == I2C_SMBUS_READ) - outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0); + outb_p(data->block[0], SMBHSTDAT0); /* Fall through */ case I2C_SMBUS_BLOCK_DATA: outb_p(command, SMBHSTCMD); @@ -397,8 +397,7 @@ found: case PCI_DEVICE_ID_VIA_82C686_4: /* The VT82C686B (rev 0x40) does support I2C block transactions, but the VT82C686A (rev 0x30) doesn't */ - if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp) - && temp >= 0x40) + if (pdev->revision >= 0x40) vt596_features |= FEATURE_I2CBLOCK; break; } diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 0d6bd4f7b7fa..e6c4a2b762ec 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -310,8 +310,6 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, break; case I2C_SMBUS_I2C_BLOCK_DATA: - if (rw == I2C_SMBUS_READ) - data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */ len = data->block[0]; if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) return -EINVAL; @@ -388,7 +386,7 @@ static const struct i2c_algorithm scx200_acb_algorithm = { }; static struct scx200_acb_iface *scx200_acb_list; -static DECLARE_MUTEX(scx200_acb_list_mutex); +static DEFINE_MUTEX(scx200_acb_list_mutex); static __init int scx200_acb_probe(struct scx200_acb_iface *iface) { @@ -472,10 +470,10 @@ static int __init scx200_acb_create(struct scx200_acb_iface *iface) return -ENODEV; } - down(&scx200_acb_list_mutex); + mutex_lock(&scx200_acb_list_mutex); iface->next = scx200_acb_list; scx200_acb_list = iface; - up(&scx200_acb_list_mutex); + mutex_unlock(&scx200_acb_list_mutex); return 0; } @@ -633,10 +631,10 @@ static void __exit scx200_acb_cleanup(void) { struct scx200_acb_iface *iface; - down(&scx200_acb_list_mutex); + mutex_lock(&scx200_acb_list_mutex); while ((iface = scx200_acb_list) != NULL) { scx200_acb_list = iface->next; - up(&scx200_acb_list_mutex); + mutex_unlock(&scx200_acb_list_mutex); i2c_del_adapter(&iface->adapter); @@ -648,9 +646,9 @@ static void __exit scx200_acb_cleanup(void) release_region(iface->base, 8); kfree(iface); - down(&scx200_acb_list_mutex); + mutex_lock(&scx200_acb_list_mutex); } - up(&scx200_acb_list_mutex); + mutex_unlock(&scx200_acb_list_mutex); } module_init(scx200_acb_init); diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index ea085a006ead..2e1c24f671cf 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -5,7 +5,7 @@ menu "Miscellaneous I2C Chip support" config SENSORS_DS1337 - tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock" + tristate "Dallas DS1337 and DS1339 Real Time Clock (DEPRECATED)" depends on EXPERIMENTAL help If you say yes here you get support for Dallas Semiconductor @@ -14,8 +14,11 @@ config SENSORS_DS1337 This driver can also be built as a module. If so, the module will be called ds1337. + This driver is deprecated and will be dropped soon. Use + rtc-ds1307 instead. + config SENSORS_DS1374 - tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock" + tristate "Dallas DS1374 Real Time Clock (DEPRECATED)" depends on EXPERIMENTAL help If you say yes here you get support for Dallas Semiconductor @@ -24,6 +27,19 @@ config SENSORS_DS1374 This driver can also be built as a module. If so, the module will be called ds1374. + This driver is deprecated and will be dropped soon. Use + rtc-ds1374 instead. + +config DS1682 + tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" + depends on EXPERIMENTAL + help + If you say yes here you get support for Dallas Semiconductor + DS1682 Total Elapsed Time Recorder. + + This driver can also be built as a module. If so, the module + will be called ds1682. + config SENSORS_EEPROM tristate "EEPROM reader" depends on EXPERIMENTAL @@ -101,7 +117,7 @@ config TPS65010 will be called tps65010. config SENSORS_M41T00 - tristate "ST M41T00 RTC chip" + tristate "ST M41T00 RTC chip (DEPRECATED)" depends on PPC32 help If you say yes here you get support for the ST M41T00 RTC chip. @@ -109,6 +125,9 @@ config SENSORS_M41T00 This driver can also be built as a module. If so, the module will be called m41t00. + This driver is deprecated and will be dropped soon. Use + rtc-ds1307 or rtc-m41t80 instead. + config SENSORS_MAX6875 tristate "Maxim MAX6875 Power supply supervisor" depends on EXPERIMENTAL @@ -124,4 +143,24 @@ config SENSORS_MAX6875 This driver can also be built as a module. If so, the module will be called max6875. +config SENSORS_TSL2550 + tristate "Taos TSL2550 ambient light sensor" + depends on EXPERIMENTAL + help + If you say yes here you get support for the Taos TSL2550 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called tsl2550. + +config MENELAUS + bool "TWL92330/Menelaus PM chip" + depends on I2C=y && ARCH_OMAP24XX + help + If you say yes here you get support for the Texas Instruments + TWL92330/Menelaus Power Management chip. This include voltage + regulators, Dual slot memory card tranceivers, real-time clock + and other features that are often used in portable devices like + cell phones and PDAs. + endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 779868ef2e26..ca924e105959 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_SENSORS_DS1337) += ds1337.o obj-$(CONFIG_SENSORS_DS1374) += ds1374.o +obj-$(CONFIG_DS1682) += ds1682.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_M41T00) += m41t00.o @@ -12,6 +13,8 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o +obj-$(CONFIG_MENELAUS) += menelaus.o +obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index bfce13c8f1ff..d3da1fb05b9b 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -88,8 +88,10 @@ static void eeprom_update_client(struct i2c_client *client, u8 slice) dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { - for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX) - if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX) + for (i = slice << 5; i < (slice + 1) << 5; i += 32) + if (i2c_smbus_read_i2c_block_data(client, i, + 32, data->data + i) + != 32) goto exit; } else { if (i2c_smbus_write_byte(client, slice << 5)) { @@ -110,7 +112,8 @@ exit: mutex_unlock(&data->update_lock); } -static ssize_t eeprom_read(struct kobject *kobj, char *buf, loff_t off, size_t count) +static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) { struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); struct eeprom_data *data = i2c_get_clientdata(client); @@ -143,7 +146,6 @@ static struct bin_attribute eeprom_attr = { .attr = { .name = "eeprom", .mode = S_IRUGO, - .owner = THIS_MODULE, }, .size = EEPROM_SIZE, .read = eeprom_read, diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 9fafadb92510..fe04e46991aa 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -18,8 +18,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#undef DEBUG -#undef VERBOSE #include <linux/kernel.h> #include <linux/module.h> @@ -44,7 +42,7 @@ #define DRIVER_VERSION "24 August 2004" -#define DRIVER_NAME (isp1301_driver.name) +#define DRIVER_NAME (isp1301_driver.driver.name) MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver"); MODULE_LICENSE("GPL"); @@ -55,6 +53,7 @@ struct isp1301 { void (*i2c_release)(struct device *dev); int irq; + int irq_type; u32 last_otg_ctrl; unsigned working:1; @@ -63,7 +62,7 @@ struct isp1301 { /* use keventd context to change the state for us */ struct work_struct work; - + unsigned long todo; # define WORK_UPDATE_ISP 0 /* update ISP from OTG */ # define WORK_UPDATE_OTG 1 /* update OTG from ISP */ @@ -94,7 +93,7 @@ struct isp1301 { /* board-specific PM hooks */ -#include <asm/arch/gpio.h> +#include <asm/gpio.h> #include <asm/arch/mux.h> #include <asm/mach-types.h> @@ -291,7 +290,7 @@ static void power_up(struct isp1301 *isp) { // isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG); - + /* do this only when cpu is driving transceiver, * so host won't see a low speed device... */ @@ -799,7 +798,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) /* role is host */ } else { if (!(otg_ctrl & OTG_ID)) { - otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; OTG_CTRL_REG = otg_ctrl | OTG_A_BUSREQ; } @@ -1100,9 +1099,9 @@ static u8 isp1301_clear_latch(struct isp1301 *isp) } static void -isp1301_work(void *data) +isp1301_work(struct work_struct *work) { - struct isp1301 *isp = data; + struct isp1301 *isp = container_of(work, struct isp1301, work); int stop; /* implicit lock: we're the only task using this device */ @@ -1244,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c) * - DEVICE mode, for when there's a B/Mini-B (device) connector * * As a rule, you won't have an isp1301 chip unless it's there to - * support the OTG mode. Other modes help testing USB controllers + * support the OTG mode. Other modes help testing USB controllers * in isolation from (full) OTG support, or maybe so later board * revisions can help to support those feature. */ @@ -1260,9 +1259,9 @@ static int isp1301_otg_enable(struct isp1301 *isp) * a few more interrupts than are strictly needed. */ isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); + INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); + INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); dev_info(&isp->client.dev, "ready for dual-role USB ...\n"); @@ -1306,9 +1305,9 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) dev_info(&isp->client.dev, "A-Host sessions ok\n"); isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_ID_GND); + INTR_ID_GND); isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_ID_GND); + INTR_ID_GND); /* If this has a Mini-AB connector, this mode is highly * nonstandard ... but can be handy for testing, especially with @@ -1368,9 +1367,9 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_SESS_VLD); + INTR_SESS_VLD); isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_VBUS_VLD); + INTR_VBUS_VLD); dev_info(&isp->client.dev, "B-Peripheral sessions ok\n"); dump_regs(isp, __FUNCTION__); @@ -1494,7 +1493,7 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) if (!isp) return 0; - INIT_WORK(&isp->work, isp1301_work, isp); + INIT_WORK(&isp->work, isp1301_work); init_timer(&isp->timer); isp->timer.function = isp1301_timer; isp->timer.data = (unsigned long) isp; @@ -1572,13 +1571,14 @@ fail1: /* IRQ wired at M14 */ omap_cfg_reg(M14_1510_GPIO2); isp->irq = OMAP_GPIO_IRQ(2); - omap_request_gpio(2); - omap_set_gpio_direction(2, 1); - omap_set_gpio_edge_ctrl(2, OMAP_GPIO_FALLING_EDGE); + if (gpio_request(2, "isp1301") == 0) + gpio_direction_input(2); + isp->irq_type = IRQF_TRIGGER_FALLING; } + isp->irq_type |= IRQF_SAMPLE_RANDOM; status = request_irq(isp->irq, isp1301_irq, - IRQF_SAMPLE_RANDOM, DRIVER_NAME, isp); + isp->irq_type, DRIVER_NAME, isp); if (status < 0) { dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", isp->irq, status); diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index 76645c142977..64692f666372 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -106,6 +106,7 @@ static void max6875_update_slice(struct i2c_client *client, int slice) I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { if (i2c_smbus_read_i2c_block_data(client, MAX6875_CMD_BLK_READ, + SLICE_SIZE, buf) != SLICE_SIZE) { goto exit_up; } @@ -125,8 +126,9 @@ exit_up: mutex_unlock(&data->update_lock); } -static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off, - size_t count) +static ssize_t max6875_read(struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) { struct i2c_client *client = kobj_to_i2c_client(kobj); struct max6875_data *data = i2c_get_clientdata(client); @@ -152,7 +154,6 @@ static struct bin_attribute user_eeprom_attr = { .attr = { .name = "eeprom", .mode = S_IRUGO, - .owner = THIS_MODULE, }, .size = USER_EEPROM_SIZE, .read = max6875_read, diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index 3c3f2ebf3fc9..503ffec2ce07 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -352,7 +352,7 @@ static void tps65010_interrupt(struct tps65010 *tps) /* REVISIT: this might need its own workqueue * plus tweaks including deadlock avoidance ... * also needs to get error handling and probably - * an #ifdef CONFIG_SOFTWARE_SUSPEND + * an #ifdef CONFIG_HIBERNATION */ hibernate(); #endif diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 435925eba437..d663e6960d93 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -207,6 +207,7 @@ EXPORT_SYMBOL_GPL(i2c_bus_type); * i2c_new_device - instantiate an i2c device for use with a new style driver * @adap: the adapter managing the device * @info: describes one I2C device; bus_num is ignored + * Context: can sleep * * Create a device to work with a new style i2c driver, where binding is * handled through driver model probe()/remove() methods. This call is not @@ -255,6 +256,7 @@ EXPORT_SYMBOL_GPL(i2c_new_device); /** * i2c_unregister_device - reverse effect of i2c_new_device() * @client: value returned from i2c_new_device() + * Context: can sleep */ void i2c_unregister_device(struct i2c_client *client) { @@ -286,7 +288,6 @@ void i2c_adapter_dev_release(struct device *dev) struct i2c_adapter *adap = to_i2c_adapter(dev); complete(&adap->dev_released); } -EXPORT_SYMBOL_GPL(i2c_adapter_dev_release); /* exported to i2c-isa */ static ssize_t show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf) @@ -305,7 +306,6 @@ struct class i2c_adapter_class = { .name = "i2c-adapter", .dev_attrs = i2c_adapter_attrs, }; -EXPORT_SYMBOL_GPL(i2c_adapter_class); /* exported to i2c-isa */ static void i2c_scan_static_board_info(struct i2c_adapter *adapter) { @@ -379,6 +379,7 @@ out_list: /** * i2c_add_adapter - declare i2c adapter, use dynamic bus number * @adapter: the adapter to add + * Context: can sleep * * This routine is used to declare an I2C adapter when its bus number * doesn't matter. Examples: for I2C adapters dynamically added by @@ -416,6 +417,7 @@ EXPORT_SYMBOL(i2c_add_adapter); /** * i2c_add_numbered_adapter - declare i2c adapter, use static bus number * @adap: the adapter to register (with adap->nr initialized) + * Context: can sleep * * This routine is used to declare an I2C adapter when its bus number * matters. Example: for I2C adapters from system-on-chip CPUs, or @@ -463,6 +465,14 @@ retry: } EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter); +/** + * i2c_del_adapter - unregister I2C adapter + * @adap: the adapter being unregistered + * Context: can sleep + * + * This unregisters an I2C adapter which was previously registered + * by @i2c_add_adapter or @i2c_add_numbered_adapter. + */ int i2c_del_adapter(struct i2c_adapter *adap) { struct list_head *item, *_n; @@ -598,6 +608,7 @@ EXPORT_SYMBOL(i2c_register_driver); /** * i2c_del_driver - unregister I2C driver * @driver: the driver being unregistered + * Context: can sleep */ void i2c_del_driver(struct i2c_driver *driver) { @@ -1331,10 +1342,14 @@ s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command, EXPORT_SYMBOL(i2c_smbus_write_block_data); /* Returns the number of read bytes */ -s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values) +s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, + u8 length, u8 *values) { union i2c_smbus_data data; + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; if (i2c_smbus_xfer(client->adapter,client->addr,client->flags, I2C_SMBUS_READ,command, I2C_SMBUS_I2C_BLOCK_DATA,&data)) @@ -1455,7 +1470,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, break; case I2C_SMBUS_I2C_BLOCK_DATA: if (read_write == I2C_SMBUS_READ) { - msg[1].len = I2C_SMBUS_BLOCK_MAX; + msg[1].len = data->block[0]; } else { msg[0].len = data->block[0] + 1; if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { @@ -1511,9 +1526,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, data->word = msgbuf1[0] | (msgbuf1[1] << 8); break; case I2C_SMBUS_I2C_BLOCK_DATA: - /* fixed at 32 for now */ - data->block[0] = I2C_SMBUS_BLOCK_MAX; - for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++) + for (i = 0; i < data->block[0]; i++) data->block[i+1] = msgbuf1[i]; break; case I2C_SMBUS_BLOCK_DATA: diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index e7a709710592..64eee9551b22 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -283,6 +283,7 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, (data_arg.size != I2C_SMBUS_WORD_DATA) && (data_arg.size != I2C_SMBUS_PROC_CALL) && (data_arg.size != I2C_SMBUS_BLOCK_DATA) && + (data_arg.size != I2C_SMBUS_I2C_BLOCK_BROKEN) && (data_arg.size != I2C_SMBUS_I2C_BLOCK_DATA) && (data_arg.size != I2C_SMBUS_BLOCK_PROC_CALL)) { dev_dbg(&client->adapter->dev, @@ -329,10 +330,18 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, if ((data_arg.size == I2C_SMBUS_PROC_CALL) || (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || + (data_arg.size == I2C_SMBUS_I2C_BLOCK_DATA) || (data_arg.read_write == I2C_SMBUS_WRITE)) { if (copy_from_user(&temp, data_arg.data, datasize)) return -EFAULT; } + if (data_arg.size == I2C_SMBUS_I2C_BLOCK_BROKEN) { + /* Convert old I2C block commands to the new + convention. This preserves binary compatibility. */ + data_arg.size = I2C_SMBUS_I2C_BLOCK_DATA; + if (data_arg.read_write == I2C_SMBUS_READ) + temp.block[0] = I2C_SMBUS_BLOCK_MAX; + } res = i2c_smbus_xfer(client->adapter,client->addr,client->flags, data_arg.read_write, data_arg.command,data_arg.size,&temp); |