5 files changed, 28 insertions, 12 deletions

diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 84e6559ccc65..1f842abcb4a4 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -44,6 +44,7 @@ config BMC150_MAGN_I2C
 	  This driver is only implementing magnetometer part, which has
 	  its own address and register map.
 
+	  This driver also supports I2C Bosch BMC156 and BMM150 chips.
 	  To compile this driver as a module, choose M here: the module will be
 	  called bmc150_magn_i2c.
 
@@ -60,6 +61,7 @@ config BMC150_MAGN_SPI
 	  This driver is only implementing magnetometer part, which has
 	  its own address and register map.
 
+	  This driver also supports SPI Bosch BMC156 and BMM150 chips.
 	  To compile this driver as a module, choose M here: the module will be
 	  called bmc150_magn_spi.
 
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index 609a2c401b5d..57d3654d7caf 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -430,8 +430,8 @@ static int ak8975_who_i_am(struct i2c_client *client,
 	 * AK8975   |  DEVICE_ID |  NA
 	 * AK8963   |  DEVICE_ID |  NA
 	 */
-	ret = i2c_smbus_read_i2c_block_data(client, AK09912_REG_WIA1,
-					    2, wia_val);
+	ret = i2c_smbus_read_i2c_block_data_or_emulated(
+			client, AK09912_REG_WIA1, 2, wia_val);
 	if (ret < 0) {
 		dev_err(&client->dev, "Error reading WIA\n");
 		return ret;
@@ -543,9 +543,9 @@ static int ak8975_setup(struct i2c_client *client)
 	}
 
 	/* Get asa data and store in the device data. */
-	ret = i2c_smbus_read_i2c_block_data(client,
-					    data->def->ctrl_regs[ASA_BASE],
-					    3, data->asa);
+	ret = i2c_smbus_read_i2c_block_data_or_emulated(
+			client, data->def->ctrl_regs[ASA_BASE],
+			3, data->asa);
 	if (ret < 0) {
 		dev_err(&client->dev, "Not able to read asa data\n");
 		return ret;
@@ -686,6 +686,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 	struct ak8975_data *data = iio_priv(indio_dev);
 	const struct i2c_client *client = data->client;
 	const struct ak_def *def = data->def;
+	u16 buff;
 	int ret;
 
 	mutex_lock(&data->lock);
@@ -694,14 +695,17 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 	if (ret)
 		goto exit;
 
-	ret = i2c_smbus_read_word_data(client, def->data_regs[index]);
+	ret = i2c_smbus_read_i2c_block_data_or_emulated(
+			client, def->data_regs[index],
+			sizeof(buff), (u8*)&buff);
 	if (ret < 0)
 		goto exit;
 
 	mutex_unlock(&data->lock);
 
-	/* Clamp to valid range. */
-	*val = clamp_t(s16, ret, -def->range, def->range);
+	/* Swap bytes and convert to valid range. */
+	buff = le16_to_cpu(buff);
+	*val = clamp_t(s16, buff, -def->range, def->range);
 	return IIO_VAL_INT;
 
 exit:
diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c
index eddc7f0d0096..ee05722587aa 100644
--- a/drivers/iio/magnetometer/bmc150_magn_i2c.c
+++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c
@@ -2,6 +2,7 @@
  * 3-axis magnetometer driver supporting following I2C Bosch-Sensortec chips:
  *  - BMC150
  *  - BMC156
+ *  - BMM150
  *
  * Copyright (c) 2016, Intel Corporation.
  *
@@ -49,6 +50,7 @@ static int bmc150_magn_i2c_remove(struct i2c_client *client)
 static const struct acpi_device_id bmc150_magn_acpi_match[] = {
 	{"BMC150B", 0},
 	{"BMC156B", 0},
+	{"BMM150B", 0},
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match);
@@ -56,6 +58,7 @@ MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match);
 static const struct i2c_device_id bmc150_magn_i2c_id[] = {
 	{"bmc150_magn",	0},
 	{"bmc156_magn", 0},
+	{"bmm150_magn", 0},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, bmc150_magn_i2c_id);
diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c
index c4c738a07695..7d4152d4d01e 100644
--- a/drivers/iio/magnetometer/bmc150_magn_spi.c
+++ b/drivers/iio/magnetometer/bmc150_magn_spi.c
@@ -2,6 +2,7 @@
  * 3-axis magnetometer driver support following SPI Bosch-Sensortec chips:
  *  - BMC150
  *  - BMC156
+ *  - BMM150
  *
  * Copyright (c) 2016, Intel Corporation.
  *
@@ -41,6 +42,7 @@ static int bmc150_magn_spi_remove(struct spi_device *spi)
 static const struct spi_device_id bmc150_magn_spi_id[] = {
 	{"bmc150_magn", 0},
 	{"bmc156_magn", 0},
+	{"bmm150_magn", 0},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, bmc150_magn_spi_id);
@@ -48,6 +50,7 @@ MODULE_DEVICE_TABLE(spi, bmc150_magn_spi_id);
 static const struct acpi_device_id bmc150_magn_acpi_match[] = {
 	{"BMC150B", 0},
 	{"BMC156B", 0},
+	{"BMM150B", 0},
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match);
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 62036d2a9956..7c94adc3ff1d 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -588,13 +588,15 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 	indio_dev->info = &magn_info;
 	mutex_init(&mdata->tb.buf_lock);
 
-	st_sensors_power_enable(indio_dev);
+	err = st_sensors_power_enable(indio_dev);
+	if (err)
+		return err;
 
 	err = st_sensors_check_device_support(indio_dev,
 					ARRAY_SIZE(st_magn_sensors_settings),
 					st_magn_sensors_settings);
 	if (err < 0)
-		return err;
+		goto st_magn_power_off;
 
 	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
 	mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
@@ -607,11 +609,11 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 
 	err = st_sensors_init_sensor(indio_dev, NULL);
 	if (err < 0)
-		return err;
+		goto st_magn_power_off;
 
 	err = st_magn_allocate_ring(indio_dev);
 	if (err < 0)
-		return err;
+		goto st_magn_power_off;
 
 	if (irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
@@ -634,6 +636,8 @@ st_magn_device_register_error:
 		st_sensors_deallocate_trigger(indio_dev);
 st_magn_probe_trigger_error:
 	st_magn_deallocate_ring(indio_dev);
+st_magn_power_off:
+	st_sensors_power_disable(indio_dev);
 
 	return err;
 }