diff options
Diffstat (limited to 'drivers/input/touchscreen/fusion_F0710A.c')
| -rw-r--r-- | drivers/input/touchscreen/fusion_F0710A.c | 510 |
1 files changed, 510 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/fusion_F0710A.c b/drivers/input/touchscreen/fusion_F0710A.c new file mode 100644 index 000000000000..779c3e83a402 --- /dev/null +++ b/drivers/input/touchscreen/fusion_F0710A.c @@ -0,0 +1,510 @@ +/* + * "fusion_F0710A" touchscreen driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <asm/irq.h> +#include <linux/gpio.h> +#include <linux/input/fusion_F0710A.h> +#include <linux/input/mt.h> +#include <linux/slab.h> +#include <linux/of_gpio.h> + + +#include "fusion_F0710A.h" + +#define DRV_NAME "fusion_F0710A" +#define MAX_TOUCHES 2 + +static struct fusion_F0710A_data fusion_F0710A; + +static unsigned short normal_i2c[] = { fusion_F0710A_I2C_SLAVE_ADDR, I2C_CLIENT_END }; + +static int fusion_F0710A_write_u8(u8 addr, u8 data) +{ + return i2c_smbus_write_byte_data(fusion_F0710A.client, addr, data); +} + +static int fusion_F0710A_read_u8(u8 addr) +{ + return i2c_smbus_read_byte_data(fusion_F0710A.client, addr); +} + +static int fusion_F0710A_read_block(u8 addr, u8 len, u8 *data) +{ + u8 msgbuf0[1] = { addr }; + u16 slave = fusion_F0710A.client->addr; + u16 flags = fusion_F0710A.client->flags; + struct i2c_msg msg[2] = { { slave, flags, 1, msgbuf0 }, + { slave, flags | I2C_M_RD, len, data } + }; + + return i2c_transfer(fusion_F0710A.client->adapter, msg, ARRAY_SIZE(msg)); +} + +static int fusion_F0710A_register_input(void) +{ + int ret; + struct input_dev *dev; + + dev = fusion_F0710A.input = input_allocate_device(); + if (dev == NULL) + return -ENOMEM; + + dev->name = "fusion_F0710A"; + + set_bit(EV_KEY, dev->evbit); + set_bit(EV_ABS, dev->evbit); + set_bit(EV_SYN, dev->evbit); + set_bit(BTN_TOUCH, dev->keybit); + + input_mt_init_slots(dev, MAX_TOUCHES, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, 0, fusion_F0710A.info.xres-1, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, fusion_F0710A.info.yres-1, 0, 0); + input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0); + + input_set_abs_params(dev, ABS_X, 0, fusion_F0710A.info.xres-1, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, fusion_F0710A.info.yres-1, 0, 0); + input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); + + ret = input_register_device(dev); + if (ret < 0) + goto bail1; + + return 0; + +bail1: + input_free_device(dev); + return ret; +} + +static void fusion_F0710A_reset(void) +{ + /* Generate a 0 => 1 edge explicitly, and wait for startup... */ + gpio_set_value(fusion_F0710A.gpio_reset, 0); + msleep(10); + gpio_set_value(fusion_F0710A.gpio_reset, 1); + /* Wait for startup (up to 125ms according to datasheet) */ + msleep(125); +} + +#define WC_RETRY_COUNT 3 +static int fusion_F0710A_write_complete(void) +{ + int ret, i; + + for(i=0; i<WC_RETRY_COUNT; i++) + { + ret = fusion_F0710A_write_u8(fusion_F0710A_SCAN_COMPLETE, 0); + if(ret == 0) + break; + else { + dev_warn(&fusion_F0710A.client->dev, + "Write complete failed(%d): %d. Resetting controller...\n", i, ret); + fusion_F0710A_reset(); + } + } + + return ret; +} + +#define DATA_START fusion_F0710A_DATA_INFO +#define DATA_END fusion_F0710A_SEC_TIDTS +#define DATA_LEN (DATA_END - DATA_START + 1) +#define DATA_OFF(x) ((x) - DATA_START) + +static int fusion_F0710A_read_sensor(void) +{ + int ret; + u8 data[DATA_LEN]; + +#define DATA(x) (data[DATA_OFF(x)]) + /* To ensure data coherency, read the sensor with a single transaction. */ + ret = fusion_F0710A_read_block(DATA_START, DATA_LEN, data); + if (ret < 0) { + dev_err(&fusion_F0710A.client->dev, + "Read block failed: %d\n", ret); + + return ret; + } + + fusion_F0710A.f_num = DATA(fusion_F0710A_DATA_INFO)&0x03; + + fusion_F0710A.y1 = DATA(fusion_F0710A_POS_X1_HI) << 8; + fusion_F0710A.y1 |= DATA(fusion_F0710A_POS_X1_LO); + fusion_F0710A.x1 = DATA(fusion_F0710A_POS_Y1_HI) << 8; + fusion_F0710A.x1 |= DATA(fusion_F0710A_POS_Y1_LO); + fusion_F0710A.z1 = DATA(fusion_F0710A_FIR_PRESS); + fusion_F0710A.tip1 = DATA(fusion_F0710A_FIR_TIDTS)&0x0f; + fusion_F0710A.tid1 = (DATA(fusion_F0710A_FIR_TIDTS)&0xf0)>>4; + + + fusion_F0710A.y2 = DATA(fusion_F0710A_POS_X2_HI) << 8; + fusion_F0710A.y2 |= DATA(fusion_F0710A_POS_X2_LO); + fusion_F0710A.x2 = DATA(fusion_F0710A_POS_Y2_HI) << 8; + fusion_F0710A.x2 |= DATA(fusion_F0710A_POS_Y2_LO); + fusion_F0710A.z2 = DATA(fusion_F0710A_SEC_PRESS); + fusion_F0710A.tip2 = DATA(fusion_F0710A_SEC_TIDTS)&0x0f; + fusion_F0710A.tid2 =(DATA(fusion_F0710A_SEC_TIDTS)&0xf0)>>4; +#undef DATA + + return 0; +} + +#define val_cut_max(x, max, reverse) \ +do \ +{ \ + if(x > max) \ + x = max; \ + if(reverse) \ + x = (max) - (x); \ +} \ +while(0) + +static void fusion_F0710A_wq(struct work_struct *work) +{ + struct input_dev *dev = fusion_F0710A.input; + + if (fusion_F0710A_read_sensor() < 0) + goto restore_irq; + +#ifdef DEBUG + printk(KERN_DEBUG "tip1, tid1, x1, y1, z1 (%x,%x,%d,%d,%d); tip2, tid2, x2, y2, z2 (%x,%x,%d,%d,%d)\n", + fusion_F0710A.tip1, fusion_F0710A.tid1, fusion_F0710A.x1, fusion_F0710A.y1, fusion_F0710A.z1, + fusion_F0710A.tip2, fusion_F0710A.tid2, fusion_F0710A.x2, fusion_F0710A.y2, fusion_F0710A.z2); +#endif /* DEBUG */ + + val_cut_max(fusion_F0710A.x1, fusion_F0710A.info.xres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.y1, fusion_F0710A.info.yres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.x2, fusion_F0710A.info.xres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.y2, fusion_F0710A.info.yres-1, fusion_F0710A.info.xy_reverse); + + if (fusion_F0710A.tid1) { + input_mt_slot(dev, fusion_F0710A.tid1 - 1); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, fusion_F0710A.tip1); + if (fusion_F0710A.tip1) { + input_report_abs(dev, ABS_MT_POSITION_X, fusion_F0710A.x1); + input_report_abs(dev, ABS_MT_POSITION_Y, fusion_F0710A.y1); + input_report_abs(dev, ABS_MT_PRESSURE, fusion_F0710A.z1); + } + } + + if (fusion_F0710A.tid2) { + input_mt_slot(dev, fusion_F0710A.tid2 - 1); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, fusion_F0710A.tip2); + if (fusion_F0710A.tip2) { + input_report_abs(dev, ABS_MT_POSITION_X, fusion_F0710A.x2); + input_report_abs(dev, ABS_MT_POSITION_Y, fusion_F0710A.y2); + input_report_abs(dev, ABS_MT_PRESSURE, fusion_F0710A.z2); + } + } + + input_mt_report_pointer_emulation(dev, false); + input_sync(dev); + +restore_irq: + enable_irq(fusion_F0710A.client->irq); + + /* Clear fusion_F0710A interrupt */ + fusion_F0710A_write_complete(); +} +static DECLARE_WORK(fusion_F0710A_work, fusion_F0710A_wq); + +static irqreturn_t fusion_F0710A_interrupt(int irq, void *dev_id) +{ + disable_irq_nosync(fusion_F0710A.client->irq); + + queue_work(fusion_F0710A.workq, &fusion_F0710A_work); + + return IRQ_HANDLED; +} + +const static u8* g_ver_product[4] = { + "10Z8", "70Z7", "43Z6", "" +}; + +static int of_fusion_F0710A_get_pins(struct device_node *np, + unsigned int *int_pin, unsigned int *reset_pin) +{ + if (of_gpio_count(np) < 2) + return -ENODEV; + + *int_pin = of_get_gpio(np, 0); + *reset_pin = of_get_gpio(np, 1); + + if (!gpio_is_valid(*int_pin) || !gpio_is_valid(*reset_pin)) { + pr_err("%s: invalid GPIO pins, int=%d/reset=%d\n", + np->full_name, *int_pin, *reset_pin); + return -ENODEV; + } + + return 0; +} + +static int fusion_F0710A_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct device_node *np = i2c->dev.of_node; + struct fusion_f0710a_init_data *pdata = i2c->dev.platform_data; + int ret; + u8 ver_product, ver_id; + u32 version; + + if (np != NULL) { + pdata = i2c->dev.platform_data = + devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL); + if (pdata == NULL) { + dev_err(&i2c->dev, "No platform data for Fusion driver\n"); + return -ENODEV; + } + /* the dtb did the pinmuxing for us */ + pdata->pinmux_fusion_pins = NULL; + ret = of_fusion_F0710A_get_pins(i2c->dev.of_node, + &pdata->gpio_int, &pdata->gpio_reset); + if (ret) + return ret; + } + else if (pdata == NULL) { + dev_err(&i2c->dev, "No platform data for Fusion driver\n"); + return -ENODEV; + } + + /* Request pinmuxing, if necessary */ + if (pdata->pinmux_fusion_pins != NULL) { + ret = pdata->pinmux_fusion_pins(); + if (ret < 0) { + dev_err(&i2c->dev, "muxing GPIOs failed\n"); + return -ENODEV; + } + } + + if ((gpio_request(pdata->gpio_int, "Fusion pen down interrupt") == 0) && + (gpio_direction_input(pdata->gpio_int) == 0)) { + gpio_export(pdata->gpio_int, 0); + } else { + dev_warn(&i2c->dev, "Could not obtain GPIO for Fusion pen down\n"); + return -ENODEV; + } + + if ((gpio_request(pdata->gpio_reset, "Fusion reset") == 0) && + (gpio_direction_output(pdata->gpio_reset, 1) == 0)) { + fusion_F0710A.gpio_reset = pdata->gpio_reset; + fusion_F0710A_reset(); + gpio_export(pdata->gpio_reset, 0); + } else { + dev_warn(&i2c->dev, "Could not obtain GPIO for Fusion reset\n"); + ret = -ENODEV; + goto bail0; + } + + /* Use Pen Down GPIO as sampling interrupt */ + i2c->irq = gpio_to_irq(pdata->gpio_int); + irq_set_irq_type(i2c->irq, IRQ_TYPE_LEVEL_HIGH); + + if(!i2c->irq) + { + dev_err(&i2c->dev, "fusion_F0710A irq < 0 \n"); + ret = -ENOMEM; + goto bail1; + } + + /* Attach the I2C client */ + fusion_F0710A.client = i2c; + i2c_set_clientdata(i2c, &fusion_F0710A); + + dev_info(&i2c->dev, "Touchscreen registered with bus id (%d) with slave address 0x%x\n", + i2c_adapter_id(fusion_F0710A.client->adapter), fusion_F0710A.client->addr); + + /* Read out a lot of registers */ + ret = fusion_F0710A_read_u8(fusion_F0710A_VIESION_INFO_LO); + if (ret < 0) { + dev_err(&i2c->dev, "query failed: %d\n", ret); + goto bail1; + } + ver_product = (((u8)ret) & 0xc0) >> 6; + version = (10 + ((((u32)ret)&0x30) >> 4)) * 100000; + version += (((u32)ret)&0xf) * 1000; + /* Read out a lot of registers */ + ret = fusion_F0710A_read_u8(fusion_F0710A_VIESION_INFO); + if (ret < 0) { + dev_err(&i2c->dev, "query failed: %d\n", ret); + goto bail1; + } + ver_id = ((u8)(ret) & 0x6) >> 1; + version += ((((u32)ret) & 0xf8) >> 3) * 10; + version += (((u32)ret) & 0x1) + 1; /* 0 is build 1, 1 is build 2 */ + dev_info(&i2c->dev, "version product %s(%d)\n", g_ver_product[ver_product] ,ver_product); + dev_info(&i2c->dev, "version id %s(%d)\n", ver_id ? "1.4" : "1.0", ver_id); + dev_info(&i2c->dev, "version series (%d)\n", version); + + switch(ver_product) + { + case fusion_F0710A_VIESION_07: /* 7 inch */ + fusion_F0710A.info.xres = fusion_F0710A07_XMAX; + fusion_F0710A.info.yres = fusion_F0710A07_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A07_REV; + break; + case fusion_F0710A_VIESION_43: /* 4.3 inch */ + fusion_F0710A.info.xres = fusion_F0710A43_XMAX; + fusion_F0710A.info.yres = fusion_F0710A43_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A43_REV; + break; + default: /* fusion_F0710A_VIESION_10 10 inch */ + fusion_F0710A.info.xres = fusion_F0710A10_XMAX; + fusion_F0710A.info.yres = fusion_F0710A10_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A10_REV; + break; + } + + /* Register the input device. */ + ret = fusion_F0710A_register_input(); + if (ret < 0) { + dev_err(&i2c->dev, "can't register input: %d\n", ret); + goto bail1; + } + + /* Create a worker thread */ + fusion_F0710A.workq = create_singlethread_workqueue(DRV_NAME); + if (fusion_F0710A.workq == NULL) { + dev_err(&i2c->dev, "can't create work queue\n"); + ret = -ENOMEM; + goto bail2; + } + + + /* Register for the interrupt and enable it. Our handler will + * start getting invoked after this call. */ + ret = request_irq(i2c->irq, fusion_F0710A_interrupt, IRQF_TRIGGER_RISING, + i2c->name, &fusion_F0710A); + if (ret < 0) { + dev_err(&i2c->dev, "can't get irq %d: %d\n", i2c->irq, ret); + goto bail3; + } + /* clear the irq first */ + ret = fusion_F0710A_write_u8(fusion_F0710A_SCAN_COMPLETE, 0); + if (ret < 0) { + dev_err(&i2c->dev, "Clear irq failed: %d\n", ret); + goto bail4; + } + + return 0; + +bail4: + free_irq(i2c->irq, &fusion_F0710A); + +bail3: + destroy_workqueue(fusion_F0710A.workq); + fusion_F0710A.workq = NULL; + +bail2: + input_unregister_device(fusion_F0710A.input); +bail1: + gpio_free(pdata->gpio_reset); +bail0: + gpio_free(pdata->gpio_int); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int fusion_F0710A_suspend(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + disable_irq(i2c->irq); + flush_workqueue(fusion_F0710A.workq); + + return 0; +} + +static int fusion_F0710A_resume(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + enable_irq(i2c->irq); + + return 0; +} +#endif + +static int fusion_F0710A_remove(struct i2c_client *i2c) +{ + struct fusion_f0710a_init_data *pdata = i2c->dev.platform_data; + + gpio_free(pdata->gpio_int); + gpio_free(pdata->gpio_reset); + destroy_workqueue(fusion_F0710A.workq); + free_irq(i2c->irq, &fusion_F0710A); + input_unregister_device(fusion_F0710A.input); + i2c_set_clientdata(i2c, NULL); + + dev_info(&i2c->dev, "driver removed\n"); + + return 0; +} + +static struct i2c_device_id fusion_F0710A_id[] = { + {"fusion_F0710A", 0}, + {}, +}; + + +static const struct of_device_id fusion_F0710A_dt_ids[] = { + { + .compatible = "touchrevolution,fusion-f0710a", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, fusion_F0710A_dt_ids); + +static const struct dev_pm_ops fusion_F0710A_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fusion_F0710A_suspend, fusion_F0710A_resume) +}; + +static struct i2c_driver fusion_F0710A_i2c_drv = { + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + .pm = &fusion_F0710A_pm_ops, + .of_match_table = fusion_F0710A_dt_ids, + }, + .probe = fusion_F0710A_probe, + .remove = fusion_F0710A_remove, + .id_table = fusion_F0710A_id, + .address_list = normal_i2c, +}; + +static int __init fusion_F0710A_init( void ) +{ + int ret; + + memset(&fusion_F0710A, 0, sizeof(fusion_F0710A)); + + /* Probe for fusion_F0710A on I2C. */ + ret = i2c_add_driver(&fusion_F0710A_i2c_drv); + if (ret < 0) { + printk(KERN_WARNING DRV_NAME " can't add i2c driver: %d\n", ret); + } + + return ret; +} + +static void __exit fusion_F0710A_exit( void ) +{ + i2c_del_driver(&fusion_F0710A_i2c_drv); +} +module_init(fusion_F0710A_init); +module_exit(fusion_F0710A_exit); + +MODULE_DESCRIPTION("fusion_F0710A Touchscreen Driver"); +MODULE_LICENSE("GPL"); + |