summaryrefslogtreecommitdiff
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/keyboard/atkbd.c9
-rw-r--r--drivers/input/keyboard/mxc_keyb.c237
-rw-r--r--drivers/input/misc/mma7455l.c2
-rw-r--r--drivers/input/mouse/alps.c252
-rw-r--r--drivers/input/mouse/alps.h1
-rw-r--r--drivers/input/mouse/synaptics.c10
-rw-r--r--drivers/input/touchscreen/ads7846.c1157
-rw-r--r--drivers/input/touchscreen/mxc_ts.c3
8 files changed, 966 insertions, 705 deletions
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 6c6a09b1c0fe..abc314f93ff3 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1608,6 +1608,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
.driver_data = atkbd_samsung_forced_release_keys,
},
{
+ .ident = "Samsung R59P/R60P/R61P",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
.ident = "Fujitsu Amilo PA 1510",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
diff --git a/drivers/input/keyboard/mxc_keyb.c b/drivers/input/keyboard/mxc_keyb.c
index 99dd7cf51cb5..033713cbdfdf 100644
--- a/drivers/input/keyboard/mxc_keyb.c
+++ b/drivers/input/keyboard/mxc_keyb.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
@@ -58,12 +58,168 @@
#include <linux/clk.h>
#include <asm/mach/keypad.h>
+/*!
+ * Keypad Module Name
+ */
+#define MOD_NAME "mxckpd"
+
+/*!
+ * XLATE mode selection
+ */
+#define KEYPAD_XLATE 0
+
+/*!
+ * RAW mode selection
+ */
+#define KEYPAD_RAW 1
+
+/*!
+ * Maximum number of keys.
+ */
+#define MAXROW 8
+#define MAXCOL 8
+#define MXC_MAXKEY (MAXROW * MAXCOL)
+
+/*!
+ * This define indicates break scancode for every key release. A constant
+ * of 128 is added to the key press scancode.
+ */
+#define MXC_KEYRELEASE 128
+
+/*
+ * _reg_KPP_KPCR _reg_KPP_KPSR _reg_KPP_KDDR _reg_KPP_KPDR
+ * The offset of Keypad Control Register Address
+ */
+#define KPCR 0x00
+
+/*
+ * The offset of Keypad Status Register Address
+ */
+#define KPSR 0x02
+
+/*
+ * The offset of Keypad Data Direction Address
+ */
+#define KDDR 0x04
+
+/*
+ * The offset of Keypad Data Register
+ */
+#define KPDR 0x06
+
+/*
+ * Key Press Interrupt Status bit
+ */
+#define KBD_STAT_KPKD 0x01
+
+/*
+ * Key Release Interrupt Status bit
+ */
+#define KBD_STAT_KPKR 0x02
+
+/*
+ * Key Depress Synchronizer Chain Status bit
+ */
+#define KBD_STAT_KDSC 0x04
+
+/*
+ * Key Release Synchronizer Status bit
+ */
+#define KBD_STAT_KRSS 0x08
+
+/*
+ * Key Depress Interrupt Enable Status bit
+ */
+#define KBD_STAT_KDIE 0x100
+
/*
- * Module header file
+ * Key Release Interrupt Enable
*/
-#include "mxc_keyb.h"
+#define KBD_STAT_KRIE 0x200
+
+/*
+ * Keypad Clock Enable
+ */
+#define KBD_STAT_KPPEN 0x400
+
+/*!
+ * Buffer size of keypad queue. Should be a power of 2.
+ */
+#define KPP_BUF_SIZE 128
+
+/*!
+ * Test whether bit is set for integer c
+ */
+#define TEST_BIT(c, n) ((c) & (0x1 << (n)))
+
+/*!
+ * Set nth bit in the integer c
+ */
+#define BITSET(c, n) ((c) | (1 << (n)))
+
+/*!
+ * Reset nth bit in the integer c
+ */
+#define BITRESET(c, n) ((c) & ~(1 << (n)))
+
+/*!
+ * This enum represents the keypad state machine to maintain debounce logic
+ * for key press/release.
+ */
+enum KeyState {
+
+ /*!
+ * Key press state.
+ */
+ KStateUp,
+
+ /*!
+ * Key press debounce state.
+ */
+ KStateFirstDown,
+
+ /*!
+ * Key release state.
+ */
+ KStateDown,
+
+ /*!
+ * Key release debounce state.
+ */
+ KStateFirstUp
+};
/*!
+ * Keypad Private Data Structure
+ */
+struct keypad_priv {
+
+ /*!
+ * Keypad state machine.
+ */
+ enum KeyState iKeyState;
+
+ /*!
+ * Number of rows configured in the keypad matrix
+ */
+ unsigned long kpp_rows;
+
+ /*!
+ * Number of Columns configured in the keypad matrix
+ */
+ unsigned long kpp_cols;
+
+ /*!
+ * Timer used for Keypad polling.
+ */
+ struct timer_list poll_timer;
+
+ /*!
+ * The base address
+ */
+ void __iomem *base;
+};
+/*!
* This structure holds the keypad private data structure.
*/
static struct keypad_priv kpp_dev;
@@ -269,26 +425,26 @@ static int mxc_kpp_scan_matrix(void)
for (col = 0; col < kpp_dev.kpp_cols; col++) { /* Col */
/* 2. Write 1.s to KPDR[15:8] setting column data to 1.s */
- reg_val = __raw_readw(KPDR);
+ reg_val = __raw_readw(kpp_dev.base + KPDR);
reg_val |= 0xff00;
- __raw_writew(reg_val, KPDR);
+ __raw_writew(reg_val, kpp_dev.base + KPDR);
/*
* 3. Configure columns as totem pole outputs(for quick
* discharging of keypad capacitance)
*/
- reg_val = __raw_readw(KPCR);
+ reg_val = __raw_readw(kpp_dev.base + KPCR);
reg_val &= 0x00ff;
- __raw_writew(reg_val, KPCR);
+ __raw_writew(reg_val, kpp_dev.base + KPCR);
udelay(2);
/*
* 4. Configure columns as open-drain
*/
- reg_val = __raw_readw(KPCR);
+ reg_val = __raw_readw(kpp_dev.base + KPCR);
reg_val |= ((1 << kpp_dev.kpp_cols) - 1) << 8;
- __raw_writew(reg_val, KPCR);
+ __raw_writew(reg_val, kpp_dev.base + KPCR);
/*
* 5. Write a single column to 0, others to 1.
@@ -298,9 +454,9 @@ static int mxc_kpp_scan_matrix(void)
*/
/* Col bit starts at 8th bit in KPDR */
- reg_val = __raw_readw(KPDR);
+ reg_val = __raw_readw(kpp_dev.base + KPDR);
reg_val &= ~(1 << (8 + col));
- __raw_writew(reg_val, KPDR);
+ __raw_writew(reg_val, kpp_dev.base + KPDR);
/* Delay added to avoid propagating the 0 from column to row
* when scanning. */
@@ -308,7 +464,7 @@ static int mxc_kpp_scan_matrix(void)
udelay(5);
/* Read row input */
- reg_val = __raw_readw(KPDR);
+ reg_val = __raw_readw(kpp_dev.base + KPDR);
for (row = 0; row < kpp_dev.kpp_rows; row++) { /* sample row */
if (TEST_BIT(reg_val, row) == 0) {
cur_rcmap[row] = BITSET(cur_rcmap[row], col);
@@ -324,12 +480,12 @@ static int mxc_kpp_scan_matrix(void)
* clear the KPKD synchronizer chain by writing "1" to KDSC register
*/
reg_val = 0x00;
- __raw_writew(reg_val, KPDR);
- reg_val = __raw_readw(KPDR);
- reg_val = __raw_readw(KPSR);
+ __raw_writew(reg_val, kpp_dev.base + KPDR);
+ reg_val = __raw_readw(kpp_dev.base + KPDR);
+ reg_val = __raw_readw(kpp_dev.base + KPSR);
reg_val |= KBD_STAT_KPKD | KBD_STAT_KPKR | KBD_STAT_KRSS |
KBD_STAT_KDSC;
- __raw_writew(reg_val, KPSR);
+ __raw_writew(reg_val, kpp_dev.base + KPSR);
/* Check key press status change */
@@ -558,14 +714,14 @@ static void mxc_kpp_handle_timer(unsigned long data)
* Stop scanning and wait for interrupt.
* Enable press interrupt and disable release interrupt.
*/
- __raw_writew(0x00FF, KPDR);
- reg_val = __raw_readw(KPSR);
+ __raw_writew(0x00FF, kpp_dev.base + KPDR);
+ reg_val = __raw_readw(kpp_dev.base + KPSR);
reg_val |= (KBD_STAT_KPKR | KBD_STAT_KPKD);
reg_val |= KBD_STAT_KRSS | KBD_STAT_KDSC;
- __raw_writew(reg_val, KPSR);
+ __raw_writew(reg_val, kpp_dev.base + KPSR);
reg_val |= KBD_STAT_KDIE;
reg_val &= ~KBD_STAT_KRIE;
- __raw_writew(reg_val, KPSR);
+ __raw_writew(reg_val, kpp_dev.base + KPSR);
/*
* No more keys pressed... make sure unwanted key codes are
@@ -613,7 +769,7 @@ static irqreturn_t mxc_kpp_interrupt(int irq, void *dev_id)
/* Delete the polling timer */
del_timer(&kpp_dev.poll_timer);
- reg_val = __raw_readw(KPSR);
+ reg_val = __raw_readw(kpp_dev.base + KPSR);
/* Check if it is key press interrupt */
if (reg_val & KBD_STAT_KPKD) {
@@ -621,7 +777,7 @@ static irqreturn_t mxc_kpp_interrupt(int irq, void *dev_id)
* Disable key press(KDIE status bit) interrupt
*/
reg_val &= ~KBD_STAT_KDIE;
- __raw_writew(reg_val, KPSR);
+ __raw_writew(reg_val, kpp_dev.base + KPSR);
} else {
/* spurious interrupt */
return IRQ_RETVAL(0);
@@ -767,6 +923,7 @@ static int mxc_kpp_probe(struct platform_device *pdev)
int i, irq;
int retval;
unsigned int reg_val;
+ struct resource *res;
keypad = (struct keypad_data *)pdev->dev.platform_data;
@@ -774,6 +931,14 @@ static int mxc_kpp_probe(struct platform_device *pdev)
kpp_dev.kpp_rows = keypad->rowmax;
key_pad_enabled = 0;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ kpp_dev.base = ioremap(res->start, res->end - res->start + 1);
+ if (!kpp_dev.base)
+ return -ENOMEM;
+
irq = platform_get_irq(pdev, 0);
keypad->irq = irq;
@@ -793,30 +958,30 @@ static int mxc_kpp_probe(struct platform_device *pdev)
* LSB nibble in KPP is for 8 rows
* MSB nibble in KPP is for 8 cols
*/
- reg_val = __raw_readw(KPCR);
+ reg_val = __raw_readw(kpp_dev.base + KPCR);
reg_val |= (1 << keypad->rowmax) - 1; /* LSB */
reg_val |= ((1 << keypad->colmax) - 1) << 8; /* MSB */
- __raw_writew(reg_val, KPCR);
+ __raw_writew(reg_val, kpp_dev.base + KPCR);
/* Write 0's to KPDR[15:8] */
- reg_val = __raw_readw(KPDR);
+ reg_val = __raw_readw(kpp_dev.base + KPDR);
reg_val &= 0x00ff;
- __raw_writew(reg_val, KPDR);
+ __raw_writew(reg_val, kpp_dev.base + KPDR);
/* Configure columns as output, rows as input (KDDR[15:0]) */
- reg_val = __raw_readw(KDDR);
+ reg_val = __raw_readw(kpp_dev.base + KDDR);
reg_val |= 0xff00;
reg_val &= 0xff00;
- __raw_writew(reg_val, KDDR);
+ __raw_writew(reg_val, kpp_dev.base + KDDR);
- reg_val = __raw_readw(KPSR);
+ reg_val = __raw_readw(kpp_dev.base + KPSR);
reg_val &= ~(KBD_STAT_KPKR | KBD_STAT_KPKD);
reg_val |= KBD_STAT_KPKD;
reg_val |= KBD_STAT_KRSS | KBD_STAT_KDSC;
- __raw_writew(reg_val, KPSR);
+ __raw_writew(reg_val, kpp_dev.base + KPSR);
reg_val |= KBD_STAT_KDIE;
reg_val &= ~KBD_STAT_KRIE;
- __raw_writew(reg_val, KPSR);
+ __raw_writew(reg_val, kpp_dev.base + KPSR);
has_leaning_key = keypad->learning;
mxckpd_keycodes = keypad->matrix;
@@ -950,16 +1115,16 @@ static int mxc_kpp_remove(struct platform_device *pdev)
* Set KDIE control bit, clear KRIE control bit (avoid false release
* events. Disable the keypad GPIO pins.
*/
- __raw_writew(0x00, KPCR);
- __raw_writew(0x00, KPDR);
- __raw_writew(0x00, KDDR);
+ __raw_writew(0x00, kpp_dev.base + KPCR);
+ __raw_writew(0x00, kpp_dev.base + KPDR);
+ __raw_writew(0x00, kpp_dev.base + KDDR);
- reg_val = __raw_readw(KPSR);
+ reg_val = __raw_readw(kpp_dev.base + KPSR);
reg_val |= KBD_STAT_KPKD;
reg_val &= ~KBD_STAT_KRSS;
reg_val |= KBD_STAT_KDIE;
reg_val &= ~KBD_STAT_KRIE;
- __raw_writew(reg_val, KPSR);
+ __raw_writew(reg_val, kpp_dev.base + KPSR);
gpio_keypad_inactive();
clk_disable(kpp_clk);
diff --git a/drivers/input/misc/mma7455l.c b/drivers/input/misc/mma7455l.c
index 1cee2d1add04..48dca60d2cfe 100644
--- a/drivers/input/misc/mma7455l.c
+++ b/drivers/input/misc/mma7455l.c
@@ -583,6 +583,8 @@ static int __devexit mma7455l_remove(struct i2c_client *client)
{
struct mma7455l_info *mma = dev_get_drvdata(&client->dev);
+ free_irq(client->irq, mma);
+
sysfs_remove_group(&client->dev.kobj, &mma7455l_attr_group);
input_unregister_device(mma->input_dev);
dev_set_drvdata(&client->dev, NULL);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 5547e2429fbe..b172bef75910 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -5,6 +5,7 @@
* Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
* Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
* Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net>
*
* ALPS detection, tap switching and status querying info is taken from
* tpconfig utility (by C. Scott Ananian and Bruce Kall).
@@ -35,6 +36,8 @@
#define ALPS_OLDPROTO 0x10
#define ALPS_PASS 0x20
#define ALPS_FW_BK_2 0x40
+#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
+ 6-byte ALPS packet */
static const struct alps_model_info alps_model_data[] = {
{ { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
@@ -55,7 +58,9 @@ static const struct alps_model_info alps_model_data[] = {
{ { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
{ { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
- { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */
+ /* Dell Latitude E5500, E6400, E6500, Precision M4400 */
+ { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
+ ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FW_BK_1 }, /* Dell Vostro 1400 */
};
@@ -66,20 +71,88 @@ static const struct alps_model_info alps_model_data[] = {
*/
/*
- * ALPS abolute Mode - new format
+ * PS/2 packet format
+ *
+ * byte 0: 0 0 YSGN XSGN 1 M R L
+ * byte 1: X7 X6 X5 X4 X3 X2 X1 X0
+ * byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ *
+ * Note that the device never signals overflow condition.
+ *
+ * ALPS absolute Mode - new format
*
* byte 0: 1 ? ? ? 1 ? ? ?
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
- * byte 2: 0 x10 x9 x8 x7 ? fin ges
+ * byte 2: 0 x10 x9 x8 x7 ? fin ges
* byte 3: 0 y9 y8 y7 1 M R L
* byte 4: 0 y6 y5 y4 y3 y2 y1 y0
* byte 5: 0 z6 z5 z4 z3 z2 z1 z0
*
+ * Dualpoint device -- interleaved packet format
+ *
+ * byte 0: 1 1 0 0 1 1 1 1
+ * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ * byte 2: 0 x10 x9 x8 x7 0 fin ges
+ * byte 3: 0 0 YSGN XSGN 1 1 1 1
+ * byte 4: X7 X6 X5 X4 X3 X2 X1 X0
+ * byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ * byte 6: 0 y9 y8 y7 1 m r l
+ * byte 7: 0 y6 y5 y4 y3 y2 y1 y0
+ * byte 8: 0 z6 z5 z4 z3 z2 z1 z0
+ *
+ * CAPITALS = stick, miniscules = touchpad
+ *
* ?'s can have different meanings on different models,
* such as wheel rotation, extra buttons, stick buttons
* on a dualpoint, etc.
*/
+static bool alps_is_valid_first_byte(const struct alps_model_info *model,
+ unsigned char data)
+{
+ return (data & model->mask0) == model->byte0;
+}
+
+static void alps_report_buttons(struct psmouse *psmouse,
+ struct input_dev *dev1, struct input_dev *dev2,
+ int left, int right, int middle)
+{
+ struct alps_data *priv = psmouse->private;
+ const struct alps_model_info *model = priv->i;
+
+ if (model->flags & ALPS_PS2_INTERLEAVED) {
+ struct input_dev *dev;
+
+ /*
+ * If shared button has already been reported on the
+ * other device (dev2) then this event should be also
+ * sent through that device.
+ */
+ dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
+ input_report_key(dev, BTN_LEFT, left);
+
+ dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
+ input_report_key(dev, BTN_RIGHT, right);
+
+ dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
+ input_report_key(dev, BTN_MIDDLE, middle);
+
+ /*
+ * Sync the _other_ device now, we'll do the first
+ * device later once we report the rest of the events.
+ */
+ input_sync(dev2);
+ } else {
+ /*
+ * For devices with non-interleaved packets we know what
+ * device buttons belong to so we can simply report them.
+ */
+ input_report_key(dev1, BTN_LEFT, left);
+ input_report_key(dev1, BTN_RIGHT, right);
+ input_report_key(dev1, BTN_MIDDLE, middle);
+ }
+}
+
static void alps_process_packet(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
@@ -89,18 +162,6 @@ static void alps_process_packet(struct psmouse *psmouse)
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
- if ((packet[0] & 0xc8) == 0x08) { /* 3-byte PS/2 packet */
- input_report_key(dev2, BTN_LEFT, packet[0] & 1);
- input_report_key(dev2, BTN_RIGHT, packet[0] & 2);
- input_report_key(dev2, BTN_MIDDLE, packet[0] & 4);
- input_report_rel(dev2, REL_X,
- packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
- input_report_rel(dev2, REL_Y,
- packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
- input_sync(dev2);
- return;
- }
-
if (priv->i->flags & ALPS_OLDPROTO) {
left = packet[2] & 0x10;
right = packet[2] & 0x08;
@@ -136,18 +197,13 @@ static void alps_process_packet(struct psmouse *psmouse)
input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
- input_report_key(dev2, BTN_LEFT, left);
- input_report_key(dev2, BTN_RIGHT, right);
- input_report_key(dev2, BTN_MIDDLE, middle);
+ alps_report_buttons(psmouse, dev2, dev, left, right, middle);
- input_sync(dev);
input_sync(dev2);
return;
}
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- input_report_key(dev, BTN_MIDDLE, middle);
+ alps_report_buttons(psmouse, dev, dev2, left, right, middle);
/* Convert hardware tap to a reasonable Z value */
if (ges && !fin) z = 40;
@@ -188,25 +244,168 @@ static void alps_process_packet(struct psmouse *psmouse)
input_sync(dev);
}
+static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
+ unsigned char packet[],
+ bool report_buttons)
+{
+ struct alps_data *priv = psmouse->private;
+ struct input_dev *dev2 = priv->dev2;
+
+ if (report_buttons)
+ alps_report_buttons(psmouse, dev2, psmouse->dev,
+ packet[0] & 1, packet[0] & 2, packet[0] & 4);
+
+ input_report_rel(dev2, REL_X,
+ packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
+ input_report_rel(dev2, REL_Y,
+ packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
+
+ input_sync(dev2);
+}
+
+static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+
+ if (psmouse->pktcnt < 6)
+ return PSMOUSE_GOOD_DATA;
+
+ if (psmouse->pktcnt == 6) {
+ /*
+ * Start a timer to flush the packet if it ends up last
+ * 6-byte packet in the stream. Timer needs to fire
+ * psmouse core times out itself. 20 ms should be enough
+ * to decide if we are getting more data or not.
+ */
+ mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
+ return PSMOUSE_GOOD_DATA;
+ }
+
+ del_timer(&priv->timer);
+
+ if (psmouse->packet[6] & 0x80) {
+
+ /*
+ * Highest bit is set - that means we either had
+ * complete ALPS packet and this is start of the
+ * next packet or we got garbage.
+ */
+
+ if (((psmouse->packet[3] |
+ psmouse->packet[4] |
+ psmouse->packet[5]) & 0x80) ||
+ (!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
+ dbg("refusing packet %x %x %x %x "
+ "(suspected interleaved ps/2)\n",
+ psmouse->packet[3], psmouse->packet[4],
+ psmouse->packet[5], psmouse->packet[6]);
+ return PSMOUSE_BAD_DATA;
+ }
+
+ alps_process_packet(psmouse);
+
+ /* Continue with the next packet */
+ psmouse->packet[0] = psmouse->packet[6];
+ psmouse->pktcnt = 1;
+
+ } else {
+
+ /*
+ * High bit is 0 - that means that we indeed got a PS/2
+ * packet in the middle of ALPS packet.
+ *
+ * There is also possibility that we got 6-byte ALPS
+ * packet followed by 3-byte packet from trackpoint. We
+ * can not distinguish between these 2 scenarios but
+ * becase the latter is unlikely to happen in course of
+ * normal operation (user would need to press all
+ * buttons on the pad and start moving trackpoint
+ * without touching the pad surface) we assume former.
+ * Even if we are wrong the wost thing that would happen
+ * the cursor would jump but we should not get protocol
+ * desynchronization.
+ */
+
+ alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
+ false);
+
+ /*
+ * Continue with the standard ALPS protocol handling,
+ * but make sure we won't process it as an interleaved
+ * packet again, which may happen if all buttons are
+ * pressed. To avoid this let's reset the 4th bit which
+ * is normally 1.
+ */
+ psmouse->packet[3] = psmouse->packet[6] & 0xf7;
+ psmouse->pktcnt = 4;
+ }
+
+ return PSMOUSE_GOOD_DATA;
+}
+
+static void alps_flush_packet(unsigned long data)
+{
+ struct psmouse *psmouse = (struct psmouse *)data;
+
+ serio_pause_rx(psmouse->ps2dev.serio);
+
+ if (psmouse->pktcnt == 6) {
+
+ /*
+ * We did not any more data in reasonable amount of time.
+ * Validate the last 3 bytes and process as a standard
+ * ALPS packet.
+ */
+ if ((psmouse->packet[3] |
+ psmouse->packet[4] |
+ psmouse->packet[5]) & 0x80) {
+ dbg("refusing packet %x %x %x "
+ "(suspected interleaved ps/2)\n",
+ psmouse->packet[3], psmouse->packet[4],
+ psmouse->packet[5]);
+ } else {
+ alps_process_packet(psmouse);
+ }
+ psmouse->pktcnt = 0;
+ }
+
+ serio_continue_rx(psmouse->ps2dev.serio);
+}
+
static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
+ const struct alps_model_info *model = priv->i;
if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
if (psmouse->pktcnt == 3) {
- alps_process_packet(psmouse);
+ alps_report_bare_ps2_packet(psmouse, psmouse->packet,
+ true);
return PSMOUSE_FULL_PACKET;
}
return PSMOUSE_GOOD_DATA;
}
- if ((psmouse->packet[0] & priv->i->mask0) != priv->i->byte0)
+ /* Check for PS/2 packet stuffed in the middle of ALPS packet. */
+
+ if ((model->flags & ALPS_PS2_INTERLEAVED) &&
+ psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
+ return alps_handle_interleaved_ps2(psmouse);
+ }
+
+ if (!alps_is_valid_first_byte(model, psmouse->packet[0])) {
+ dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
+ psmouse->packet[0], model->mask0, model->byte0);
return PSMOUSE_BAD_DATA;
+ }
/* Bytes 2 - 6 should have 0 in the highest bit */
if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
- (psmouse->packet[psmouse->pktcnt - 1] & 0x80))
+ (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
+ dbg("refusing packet[%i] = %x\n",
+ psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]);
return PSMOUSE_BAD_DATA;
+ }
if (psmouse->pktcnt == 6) {
alps_process_packet(psmouse);
@@ -441,6 +640,7 @@ static void alps_disconnect(struct psmouse *psmouse)
struct alps_data *priv = psmouse->private;
psmouse_reset(psmouse);
+ del_timer_sync(&priv->timer);
input_unregister_device(priv->dev2);
kfree(priv);
}
@@ -457,6 +657,8 @@ int alps_init(struct psmouse *psmouse)
goto init_fail;
priv->dev2 = dev2;
+ setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
+
psmouse->private = priv;
if (alps_hw_init(psmouse, &version))
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 4bbddc99962b..4b6024163d3c 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -23,6 +23,7 @@ struct alps_data {
char phys[32]; /* Phys */
const struct alps_model_info *i;/* Info */
int prev_fin; /* Finger bit from previous packet */
+ struct timer_list timer;
};
#ifdef CONFIG_MOUSE_PS2_ALPS
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 19984bf06cad..c65e24510494 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -652,6 +652,16 @@ static const struct dmi_system_id toshiba_dmi_table[] = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M300"),
},
+
+ },
+ {
+ .ident = "Toshiba Portege M300",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Portable PC"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Version 1.0"),
+ },
+
},
{ }
};
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index ba9d38c3f412..0f74aeee2aea 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -17,14 +17,11 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/hwmon.h>
+#include <linux/device.h>
#include <linux/init.h>
-#include <linux/err.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <asm/irq.h>
@@ -33,9 +30,7 @@
/*
* This code has been heavily tested on a Nokia 770, and lightly
* tested on other ads7846 devices (OSK/Mistral, Lubbock).
- * TSC2046 is just newer ads7846 silicon.
- * Support for ads7843 tested on Atmel at91sam926x-EK.
- * Support for ads7845 has only been stubbed in.
+ * Support for ads7843 and ads7845 has only been stubbed in.
*
* IRQ handling needs a workaround because of a shortcoming in handling
* edge triggered IRQs on some platforms like the OMAP1/2. These
@@ -51,8 +46,7 @@
* files.
*/
-#define TS_POLL_DELAY (1 * 1000000) /* ns delay before the first sample */
-#define TS_POLL_PERIOD (5 * 1000000) /* ns delay between samples */
+#define TS_POLL_PERIOD msecs_to_jiffies(10)
/* this driver doesn't aim at the peak continuous sample rate */
#define SAMPLE_BITS (8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
@@ -61,77 +55,57 @@ struct ts_event {
/* For portability, we can't read 12 bit values using SPI (which
* would make the controller deliver them as native byteorder u16
* with msbs zeroed). Instead, we read them as two 8-bit values,
- * *** WHICH NEED BYTESWAPPING *** and range adjustment.
+ * which need byteswapping then range adjustment.
*/
- u16 x;
- u16 y;
- u16 z1, z2;
- int ignore;
-};
-
-/*
- * We allocate this separately to avoid cache line sharing issues when
- * driver is used with DMA-based SPI controllers (like atmel_spi) on
- * systems where main memory is not DMA-coherent (most non-x86 boards).
- */
-struct ads7846_packet {
- u8 read_x, read_y, read_z1, read_z2, pwrdown;
- u16 dummy; /* for the pwrdown read */
- struct ts_event tc;
+ __be16 x;
+ __be16 y;
+ __be16 z1, z2;
+ int ignore;
};
struct ads7846 {
struct input_dev *input;
char phys[32];
- char name[32];
- struct spi_device *spi;
-
-#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
- struct attribute_group *attr_group;
- struct device *hwmon;
-#endif
+ u32 *txbuf;
+ u32 *rxbuf;
+ u8 buflen;
+ u8 skip_samples;
+ u16 rotate;
+ struct spi_device *spi;
u16 model;
- u16 vref_mv;
u16 vref_delay_usecs;
u16 x_plate_ohms;
u16 pressure_max;
- bool swap_xy;
-
- struct ads7846_packet *packet;
+ u8 read_x, read_y, read_z1, read_z2, pwrdown;
+ u16 zerro; /* to send zerros while receiving */
+ u16 dummy; /* for the pwrdown read */
+ struct ts_event tc;
- struct spi_transfer xfer[18];
+ struct spi_transfer xfer[10];
struct spi_message msg[5];
struct spi_message *last_msg;
int msg_idx;
int read_cnt;
int read_rep;
int last_read;
+ int skip_this_sample;
u16 debounce_max;
u16 debounce_tol;
u16 debounce_rep;
- u16 penirq_recheck_delay_usecs;
-
spinlock_t lock;
- struct hrtimer timer;
+ struct timer_list timer; /* P: lock */
unsigned pendown:1; /* P: lock */
unsigned pending:1; /* P: lock */
// FIXME remove "irq_disabled"
unsigned irq_disabled:1; /* P: lock */
unsigned disabled:1;
- unsigned is_suspended:1;
- int (*filter)(void *data, int data_idx, int *val);
- void *filter_data;
- void (*filter_cleanup)(void *data);
int (*get_pendown_state)(void);
- int gpio_pendown;
-
- void (*wait_for_sync)(void);
};
/* leave chip selected when we're done, for quicker re-select? */
@@ -141,6 +115,7 @@ struct ads7846 {
#define CS_CHANGE(xfer) ((xfer).cs_change = 0)
#endif
+
/*--------------------------------------------------------------------------*/
/* The ADS7846 has touchscreen and other sensors.
@@ -167,16 +142,19 @@ struct ads7846 {
#define MAX_12BIT ((1<<12)-1)
/* leave ADC powered up (disables penirq) between differential samples */
-#define READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \
- | ADS_12_BIT | ADS_DFR | \
- (adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0))
+#define READ_12BIT_DFR(x) (ADS_START | ADS_A2A1A0_d_ ## x \
+ | ADS_12_BIT | ADS_DFR)
+
+#define READ_Y (READ_12BIT_DFR(y) | ADS_PD10_ADC_ON)
+#define READ_Z1 (READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
+#define READ_Z2 (READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
-#define READ_Y(vref) (READ_12BIT_DFR(y, 1, vref))
-#define READ_Z1(vref) (READ_12BIT_DFR(z1, 1, vref))
-#define READ_Z2(vref) (READ_12BIT_DFR(z2, 1, vref))
+#define READ_X (READ_12BIT_DFR(x) | ADS_PD10_ADC_ON)
+#define PWRDOWN (READ_12BIT_DFR(y) | ADS_PD10_PDOWN) /* LAST */
-#define READ_X(vref) (READ_12BIT_DFR(x, 1, vref))
-#define PWRDOWN (READ_12BIT_DFR(y, 0, 0)) /* LAST */
+/* alternate ads7843 commands */
+#define ALT_READ_Y (READ_12BIT_DFR(y) | ADS_PD10_ALL_ON)
+#define ALT_READ_X (READ_12BIT_DFR(x) | ADS_PD10_ALL_ON)
/* single-ended samples need to first power up reference voltage;
* we leave both ADC and VREF powered
@@ -184,15 +162,21 @@ struct ads7846 {
#define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
| ADS_12_BIT | ADS_SER)
-#define REF_ON (READ_12BIT_DFR(x, 1, 1))
-#define REF_OFF (READ_12BIT_DFR(y, 0, 0))
+#define REF_ON (READ_12BIT_DFR(x) | ADS_PD10_ALL_ON)
+#define REF_OFF (READ_12BIT_DFR(y) | ADS_PD10_PDOWN)
+
+#define MAX_BUF_SAMPLE_LEN (20)
+/* Following configuration should be done in the platform configuration */
+#define SCREEN_LANDSCAPE 1
+#undef SCREEN_PORTRAIT
+#define MAX_DIFF_BETWEEN_SAMPLES_X 100
+#define MAX_DIFF_BETWEEN_SAMPLES_Y 100
+
/*--------------------------------------------------------------------------*/
/*
* Non-touchscreen sensors only use single-ended conversions.
- * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
- * ads7846 lets that pin be unconnected, to use internal vREF.
*/
struct ser_req {
@@ -200,6 +184,7 @@ struct ser_req {
u8 command;
u8 ref_off;
u16 scratch;
+ u16 zerro;
__be16 sample;
struct spi_message msg;
struct spi_transfer xfer[6];
@@ -211,247 +196,132 @@ static void ads7846_disable(struct ads7846 *ts);
static int device_suspended(struct device *dev)
{
struct ads7846 *ts = dev_get_drvdata(dev);
- return ts->is_suspended || ts->disabled;
+ return dev->power.power_state.event != PM_EVENT_ON || ts->disabled;
}
+static int ads7843_setup_buffers(struct device *dev)
+{
+ struct ads7846 *ts = dev_get_drvdata(dev);
+ int i;
+
+ ts->txbuf = kzalloc(sizeof(u32) * ts->buflen * 3, GFP_KERNEL);
+ if (!ts->txbuf)
+ return -ENOMEM;
+
+ ts->rxbuf = kzalloc(sizeof(u32) * ts->buflen * 3, GFP_KERNEL);
+ if (!ts->rxbuf) {
+ kfree(ts->txbuf);
+ return -ENOMEM;
+ }
+ for (i = 0; i < ((ts->buflen * 3) / 2); i++)
+#if defined( SCREEN_LANDSCAPE )
+ ts->txbuf[i] = (READ_12BIT_DFR(x) | ADS_PD10_PDOWN) << 8;
+#else
+ ts->txbuf[i] = (READ_12BIT_DFR(y) | ADS_PD10_PDOWN) << 8;
+#endif
+ for (; i < ts->buflen * 3; i++)
+#if defined( SCREEN_LANDSCAPE )
+ ts->txbuf[i] = (READ_12BIT_DFR(y) | ADS_PD10_PDOWN) << 8;
+#else
+ ts->txbuf[i] = (READ_12BIT_DFR(x) | ADS_PD10_PDOWN) << 8;
+#endif
+ return 0;
+}
+
+
static int ads7846_read12_ser(struct device *dev, unsigned command)
{
struct spi_device *spi = to_spi_device(dev);
struct ads7846 *ts = dev_get_drvdata(dev);
struct ser_req *req = kzalloc(sizeof *req, GFP_KERNEL);
int status;
- int use_internal;
+ int sample;
+ int i;
if (!req)
return -ENOMEM;
spi_message_init(&req->msg);
- /* FIXME boards with ads7846 might use external vref instead ... */
- use_internal = (ts->model == 7846);
-
- /* maybe turn on internal vREF, and let it settle */
- if (use_internal) {
- req->ref_on = REF_ON;
- req->xfer[0].tx_buf = &req->ref_on;
- req->xfer[0].len = 1;
- spi_message_add_tail(&req->xfer[0], &req->msg);
-
- req->xfer[1].rx_buf = &req->scratch;
- req->xfer[1].len = 2;
-
- /* for 1uF, settle for 800 usec; no cap, 100 usec. */
- req->xfer[1].delay_usecs = ts->vref_delay_usecs;
- spi_message_add_tail(&req->xfer[1], &req->msg);
- }
+ /* activate reference, so it has time to settle; */
+ req->ref_on = REF_ON;
+ req->xfer[0].tx_buf = &req->ref_on;
+ req->xfer[0].len = 1;
+ req->xfer[1].tx_buf = &req->zerro;
+ req->xfer[1].rx_buf = &req->scratch;
+ req->xfer[1].len = 2;
+
+ /*
+ * for external VREF, 0 usec (and assume it's always on);
+ * for 1uF, use 800 usec;
+ * no cap, 100 usec.
+ */
+ req->xfer[1].delay_usecs = ts->vref_delay_usecs;
/* take sample */
req->command = (u8) command;
req->xfer[2].tx_buf = &req->command;
req->xfer[2].len = 1;
- spi_message_add_tail(&req->xfer[2], &req->msg);
-
+ req->xfer[3].tx_buf = &req->zerro;
req->xfer[3].rx_buf = &req->sample;
req->xfer[3].len = 2;
- spi_message_add_tail(&req->xfer[3], &req->msg);
/* REVISIT: take a few more samples, and compare ... */
- /* converter in low power mode & enable PENIRQ */
- req->ref_off = PWRDOWN;
+ /* turn off reference */
+ req->ref_off = REF_OFF;
req->xfer[4].tx_buf = &req->ref_off;
req->xfer[4].len = 1;
- spi_message_add_tail(&req->xfer[4], &req->msg);
-
+ // TODO req->xfer[3].tx_buf = &req->zerro;
+ req->xfer[5].tx_buf = &req->zerro;
req->xfer[5].rx_buf = &req->scratch;
req->xfer[5].len = 2;
+
CS_CHANGE(req->xfer[5]);
- spi_message_add_tail(&req->xfer[5], &req->msg);
+
+ /* group all the transfers together, so we can't interfere with
+ * reading touchscreen state; disable penirq while sampling
+ */
+ for (i = 0; i < 6; i++)
+ spi_message_add_tail(&req->xfer[i], &req->msg);
ts->irq_disabled = 1;
- disable_irq(spi->irq);
+ disable_irq_nosync(spi->irq);
status = spi_sync(spi, &req->msg);
ts->irq_disabled = 0;
enable_irq(spi->irq);
- if (status == 0) {
- /* on-wire is a must-ignore bit, a BE12 value, then padding */
- status = be16_to_cpu(req->sample);
- status = status >> 3;
- status &= 0x0fff;
- }
+ if (req->msg.status)
+ status = req->msg.status;
+
+ /* on-wire is a must-ignore bit, a BE12 value, then padding */
+ sample = be16_to_cpu(req->sample);
+ sample = sample >> 3;
+ sample &= 0x0fff;
kfree(req);
- return status;
+ return status ? status : sample;
}
-#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
-
-#define SHOW(name, var, adjust) static ssize_t \
+#define SHOW(name) static ssize_t \
name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
- struct ads7846 *ts = dev_get_drvdata(dev); \
ssize_t v = ads7846_read12_ser(dev, \
- READ_12BIT_SER(var) | ADS_PD10_ALL_ON); \
+ READ_12BIT_SER(name) | ADS_PD10_ALL_ON); \
if (v < 0) \
return v; \
- return sprintf(buf, "%u\n", adjust(ts, v)); \
+ return sprintf(buf, "%u\n", (unsigned) v); \
} \
static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
-
-/* Sysfs conventions report temperatures in millidegrees Celsius.
- * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
- * accuracy scheme without calibration data. For now we won't try either;
- * userspace sees raw sensor values, and must scale/calibrate appropriately.
- */
-static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v)
-{
- return v;
-}
-
-SHOW(temp0, temp0, null_adjust) /* temp1_input */
-SHOW(temp1, temp1, null_adjust) /* temp2_input */
-
-
-/* sysfs conventions report voltages in millivolts. We can convert voltages
- * if we know vREF. userspace may need to scale vAUX to match the board's
- * external resistors; we assume that vBATT only uses the internal ones.
- */
-static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
-{
- unsigned retval = v;
-
- /* external resistors may scale vAUX into 0..vREF */
- retval *= ts->vref_mv;
- retval = retval >> 12;
- return retval;
-}
-
-static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
-{
- unsigned retval = vaux_adjust(ts, v);
-
- /* ads7846 has a resistor ladder to scale this signal down */
- if (ts->model == 7846)
- retval *= 4;
- return retval;
-}
-
-SHOW(in0_input, vaux, vaux_adjust)
-SHOW(in1_input, vbatt, vbatt_adjust)
-
-
-static struct attribute *ads7846_attributes[] = {
- &dev_attr_temp0.attr,
- &dev_attr_temp1.attr,
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- NULL,
-};
-
-static struct attribute_group ads7846_attr_group = {
- .attrs = ads7846_attributes,
-};
-
-static struct attribute *ads7843_attributes[] = {
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- NULL,
-};
-
-static struct attribute_group ads7843_attr_group = {
- .attrs = ads7843_attributes,
-};
-
-static struct attribute *ads7845_attributes[] = {
- &dev_attr_in0_input.attr,
- NULL,
-};
-
-static struct attribute_group ads7845_attr_group = {
- .attrs = ads7845_attributes,
-};
-
-static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
-{
- struct device *hwmon;
- int err;
-
- /* hwmon sensors need a reference voltage */
- switch (ts->model) {
- case 7846:
- if (!ts->vref_mv) {
- dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
- ts->vref_mv = 2500;
- }
- break;
- case 7845:
- case 7843:
- if (!ts->vref_mv) {
- dev_warn(&spi->dev,
- "external vREF for ADS%d not specified\n",
- ts->model);
- return 0;
- }
- break;
- }
-
- /* different chips have different sensor groups */
- switch (ts->model) {
- case 7846:
- ts->attr_group = &ads7846_attr_group;
- break;
- case 7845:
- ts->attr_group = &ads7845_attr_group;
- break;
- case 7843:
- ts->attr_group = &ads7843_attr_group;
- break;
- default:
- dev_dbg(&spi->dev, "ADS%d not recognized\n", ts->model);
- return 0;
- }
-
- err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
- if (err)
- return err;
-
- hwmon = hwmon_device_register(&spi->dev);
- if (IS_ERR(hwmon)) {
- sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
- return PTR_ERR(hwmon);
- }
-
- ts->hwmon = hwmon;
- return 0;
-}
-
-static void ads784x_hwmon_unregister(struct spi_device *spi,
- struct ads7846 *ts)
-{
- if (ts->hwmon) {
- sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
- hwmon_device_unregister(ts->hwmon);
- }
-}
-
-#else
-static inline int ads784x_hwmon_register(struct spi_device *spi,
- struct ads7846 *ts)
-{
- return 0;
-}
-
-static inline void ads784x_hwmon_unregister(struct spi_device *spi,
- struct ads7846 *ts)
-{
-}
-#endif
+SHOW(temp0)
+SHOW(temp1)
+SHOW(vaux)
+SHOW(vbatt)
static int is_pen_down(struct device *dev)
{
- struct ads7846 *ts = dev_get_drvdata(dev);
+ struct ads7846 *ts = dev_get_drvdata(dev);
return ts->pendown;
}
@@ -477,11 +347,10 @@ static ssize_t ads7846_disable_store(struct device *dev,
const char *buf, size_t count)
{
struct ads7846 *ts = dev_get_drvdata(dev);
- unsigned long i;
-
- if (strict_strtoul(buf, 10, &i))
- return -EINVAL;
+ char *endp;
+ int i;
+ i = simple_strtoul(buf, &endp, 10);
spin_lock_irq(&ts->lock);
if (i)
@@ -496,30 +365,8 @@ static ssize_t ads7846_disable_store(struct device *dev,
static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
-static struct attribute *ads784x_attributes[] = {
- &dev_attr_pen_down.attr,
- &dev_attr_disable.attr,
- NULL,
-};
-
-static struct attribute_group ads784x_attr_group = {
- .attrs = ads784x_attributes,
-};
-
/*--------------------------------------------------------------------------*/
-static int get_pendown_state(struct ads7846 *ts)
-{
- if (ts->get_pendown_state)
- return ts->get_pendown_state();
-
- return !gpio_get_value(ts->gpio_pendown);
-}
-
-static void null_wait_for_sync(void)
-{
-}
-
/*
* PENIRQ only kicks the timer. The timer only reissues the SPI transfer,
* to retrieve touchscreen status.
@@ -531,25 +378,25 @@ static void null_wait_for_sync(void)
static void ads7846_rx(void *ads)
{
struct ads7846 *ts = ads;
- struct ads7846_packet *packet = ts->packet;
+ struct input_dev *input_dev = ts->input;
unsigned Rt;
+ unsigned sync = 0;
u16 x, y, z1, z2;
+ unsigned long flags;
- /* ads7846_rx_val() did in-place conversion (including byteswap) from
- * on-the-wire format as part of debouncing to get stable readings.
+ /* adjust: on-wire is a must-ignore bit, a BE12 value, then padding;
+ * built from two 8 bit values written msb-first.
*/
- x = packet->tc.x;
- y = packet->tc.y;
- z1 = packet->tc.z1;
- z2 = packet->tc.z2;
+ x = (be16_to_cpu(ts->tc.x) >> 3) & 0x0fff;
+ y = (be16_to_cpu(ts->tc.y) >> 3) & 0x0fff;
+ z1 = (be16_to_cpu(ts->tc.z1) >> 3) & 0x0fff;
+ z2 = (be16_to_cpu(ts->tc.z2) >> 3) & 0x0fff;
/* range filtering */
if (x == MAX_12BIT)
x = 0;
- if (ts->model == 7843) {
- Rt = ts->pressure_max / 2;
- } else if (likely(x && z1)) {
+ if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
/* compute touch pressure resistance using equation #2 */
Rt = z2;
Rt -= z1;
@@ -557,194 +404,281 @@ static void ads7846_rx(void *ads)
Rt *= ts->x_plate_ohms;
Rt /= z1;
Rt = (Rt + 2047) >> 12;
- } else {
+ } else
Rt = 0;
- }
/* Sample found inconsistent by debouncing or pressure is beyond
- * the maximum. Don't report it to user space, repeat at least
- * once more the measurement
- */
- if (packet->tc.ignore || Rt > ts->pressure_max) {
-#ifdef VERBOSE
- pr_debug("%s: ignored %d pressure %d\n",
- dev_name(&ts->spi->dev), packet->tc.ignore, Rt);
-#endif
- hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
- HRTIMER_MODE_REL);
+ * the maximum. Don't report it to user space, repeat at least
+ * once more the measurement */
+ if (ts->tc.ignore || Rt > ts->pressure_max) {
+ mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
return;
}
- /* Maybe check the pendown state before reporting. This discards
- * false readings when the pen is lifted.
+ /* NOTE: "pendown" is inferred from pressure; we don't rely on
+ * being able to check nPENIRQ status, or "friendly" trigger modes
+ * (both-edges is much better than just-falling or low-level).
+ *
+ * REVISIT: some boards may require reading nPENIRQ; it's
+ * needed on 7843. and 7845 reads pressure differently...
+ *
+ * REVISIT: the touchscreen might not be connected; this code
+ * won't notice that, even if nPENIRQ never fires ...
*/
- if (ts->penirq_recheck_delay_usecs) {
- udelay(ts->penirq_recheck_delay_usecs);
- if (!get_pendown_state(ts))
- Rt = 0;
+ if (!ts->pendown && Rt != 0) {
+ input_report_key(input_dev, BTN_TOUCH, 1);
+ sync = 1;
+ } else if (ts->pendown && Rt == 0) {
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ sync = 1;
}
- /* NOTE: We can't rely on the pressure to determine the pen down
- * state, even this controller has a pressure sensor. The pressure
- * value can fluctuate for quite a while after lifting the pen and
- * in some cases may not even settle at the expected value.
- *
- * The only safe way to check for the pen up condition is in the
- * timer by reading the pen signal state (it's a GPIO _and_ IRQ).
- */
if (Rt) {
- struct input_dev *input = ts->input;
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ sync = 1;
+ }
- if (!ts->pendown) {
- input_report_key(input, BTN_TOUCH, 1);
- ts->pendown = 1;
-#ifdef VERBOSE
- dev_dbg(&ts->spi->dev, "DOWN\n");
+ if (sync) {
+ input_report_abs(input_dev, ABS_PRESSURE, Rt);
+ input_sync(input_dev);
+ }
+
+#ifdef VERBOSE
+ if (Rt || ts->pendown)
+ pr_debug("%s: %d/%d/%d%s\n", dev_name(&ts->spi->dev),
+ x, y, Rt, Rt ? "" : " UP");
#endif
+
+ spin_lock_irqsave(&ts->lock, flags);
+
+ ts->pendown = (Rt != 0);
+ mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+
+ spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static inline u16 ad7843_get_sample_val(u32 sample)
+{
+ return (((((sample & 0x00ff0000) >> 8) | (sample >> 24)) >> 3) & 0x0fff);
+}
+
+static u32 ad7843_get_better_values(struct ads7846 *ts, int index, int skiplimit)
+{
+ u32 diff12, diff23, diff31;
+ u32 vals[3];
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ vals[i] = ad7843_get_sample_val(ts->rxbuf[index+i]);
+ if (vals[i] == 0x0fff || vals[i] == 0) {
+ ts->skip_this_sample = 1;
+ return 0;
}
+ }
- if (ts->swap_xy)
- swap(x, y);
+ diff12 = (vals[0] > vals[1]) ? vals[0] - vals[1] : vals[1] - vals[0];
+ if (diff12 > skiplimit) {
+ ts->skip_this_sample = 1;
+ return 0;
+ }
- input_report_abs(input, ABS_X, x);
- input_report_abs(input, ABS_Y, y);
- input_report_abs(input, ABS_PRESSURE, Rt);
+ diff23 = (vals[1] > vals[2]) ? vals[1] - vals[2] : vals[2] - vals[1];
+ if (diff23 > skiplimit) {
+ ts->skip_this_sample = 1;
+ return 0;
+ }
- input_sync(input);
-#ifdef VERBOSE
- dev_dbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
-#endif
+ diff31 = (vals[2] > vals[0]) ? vals[2] - vals[0] : vals[0] - vals[2];
+ if (diff31 > skiplimit) {
+ ts->skip_this_sample = 1;
+ return 0;
}
- hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
- HRTIMER_MODE_REL);
+ if (diff12 < diff23 && diff12 < diff31)
+ return (vals[0] + vals[1]) / 2;
+ if (diff23 < diff12 && diff23 < diff31)
+ return (vals[1] + vals[2]) / 2;
+
+ return (vals[0] + vals[2]) / 2;
}
-static int ads7846_debounce(void *ads, int data_idx, int *val)
+static void ads7843_rx_average(void *ads)
+{
+ struct ads7846 *ts = ads;
+ struct input_dev *input_dev = ts->input;
+ u16 x, y, temp;
+ unsigned long flags;
+ int i, sample_count;
+
+ dev_dbg(&ts->spi->dev, "%s\n", __FUNCTION__);
+
+ for (i = 0, y = 0, x = 0, sample_count = 0; i < (ts->buflen * 3 / 2); i+=3) {
+ if (i >= ts->skip_samples*3) {
+ temp = ad7843_get_better_values(ts, i, MAX_DIFF_BETWEEN_SAMPLES_Y);
+ if (!ts->skip_this_sample) {
+ if (ts->rotate == 180) {
+ y += MAX_12BIT - temp;
+ } else if (ts->rotate == 0) {
+ y += temp;
+ } else {
+ dev_info(&ts->spi->dev,
+ "Rotate mode %d, not implemented yet\n",
+ ts->rotate);
+ }
+ sample_count++;
+ }
+ }
+ ts->skip_this_sample = 0;
+ }
+
+ if (!sample_count)
+ goto sample_taken;
+
+ y /= sample_count;
+
+ for (sample_count = 0; i < (ts->buflen * 3); i+=3) {
+ if (i >= (ts->skip_samples + ts->buflen / 2)*3) {
+ temp = ad7843_get_better_values(ts, i, MAX_DIFF_BETWEEN_SAMPLES_X);
+ if (!ts->skip_this_sample) {
+ if (ts->rotate == 180) {
+ x += MAX_12BIT - temp;
+ } else if (ts->rotate == 0) {
+ x += temp;
+ } else {
+ dev_info(&ts->spi->dev,
+ "Rotate mode %d, not implemented yet\n",
+ ts->rotate);
+ }
+ sample_count++;
+ }
+ }
+ ts->skip_this_sample = 0;
+ }
+
+ if (!sample_count)
+ goto sample_taken;
+
+ x /= sample_count;
+
+ if (ts->pendown) {
+
+ input_report_key(input_dev, BTN_TOUCH, 1);
+ input_report_abs(input_dev, ABS_PRESSURE, ts->pressure_max / 2);
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ } else {
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+ }
+
+ input_sync(input_dev);
+ dev_dbg(&ts->spi->dev, "%d/%d %s\n", x, y, ts->pendown ? "" : " UP");
+
+sample_taken:
+ if (ts->pendown) {
+ spin_lock_irqsave(&ts->lock, flags);
+ mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+ spin_unlock_irqrestore(&ts->lock, flags);
+ }
+}
+
+static void ads7846_debounce(void *ads)
{
struct ads7846 *ts = ads;
+ struct spi_message *m;
+ struct spi_transfer *t;
+ int val;
+ int status;
- if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
- /* Start over collecting consistent readings. */
- ts->read_rep = 0;
+ m = &ts->msg[ts->msg_idx];
+ t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+ val = (be16_to_cpu(*(__be16 *)t->rx_buf) >> 3) & 0x0fff;
+ if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
/* Repeat it, if this was the first read or the read
* wasn't consistent enough. */
if (ts->read_cnt < ts->debounce_max) {
- ts->last_read = *val;
+ ts->last_read = val;
ts->read_cnt++;
- return ADS7846_FILTER_REPEAT;
} else {
/* Maximum number of debouncing reached and still
* not enough number of consistent readings. Abort
* the whole sample, repeat it in the next sampling
* period.
*/
+ ts->tc.ignore = 1;
ts->read_cnt = 0;
- return ADS7846_FILTER_IGNORE;
+ /* Last message will contain ads7846_rx() as the
+ * completion function.
+ */
+ m = ts->last_msg;
}
+ /* Start over collecting consistent readings. */
+ ts->read_rep = 0;
} else {
if (++ts->read_rep > ts->debounce_rep) {
/* Got a good reading for this coordinate,
* go for the next one. */
+ ts->tc.ignore = 0;
+ ts->msg_idx++;
ts->read_cnt = 0;
ts->read_rep = 0;
- return ADS7846_FILTER_OK;
- } else {
+ m++;
+ } else
/* Read more values that are consistent. */
ts->read_cnt++;
- return ADS7846_FILTER_REPEAT;
- }
}
-}
-
-static int ads7846_no_filter(void *ads, int data_idx, int *val)
-{
- return ADS7846_FILTER_OK;
-}
-
-static void ads7846_rx_val(void *ads)
-{
- struct ads7846 *ts = ads;
- struct ads7846_packet *packet = ts->packet;
- struct spi_message *m;
- struct spi_transfer *t;
- int val;
- int action;
- int status;
-
- m = &ts->msg[ts->msg_idx];
- t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
-
- /* adjust: on-wire is a must-ignore bit, a BE12 value, then padding;
- * built from two 8 bit values written msb-first.
- */
- val = be16_to_cpup((__be16 *)t->rx_buf) >> 3;
-
- action = ts->filter(ts->filter_data, ts->msg_idx, &val);
- switch (action) {
- case ADS7846_FILTER_REPEAT:
- break;
- case ADS7846_FILTER_IGNORE:
- packet->tc.ignore = 1;
- /* Last message will contain ads7846_rx() as the
- * completion function.
- */
- m = ts->last_msg;
- break;
- case ADS7846_FILTER_OK:
- *(u16 *)t->rx_buf = val;
- packet->tc.ignore = 0;
- m = &ts->msg[++ts->msg_idx];
- break;
- default:
- BUG();
- }
- ts->wait_for_sync();
status = spi_async(ts->spi, m);
if (status)
dev_err(&ts->spi->dev, "spi_async --> %d\n",
status);
}
-static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
+static void ads7846_timer(unsigned long handle)
{
- struct ads7846 *ts = container_of(handle, struct ads7846, timer);
- int status = 0;
+ struct ads7846 *ts = (void *)handle;
+ struct input_dev *input_dev = ts->input;
+ int status = 0;
- spin_lock(&ts->lock);
-
- if (unlikely(!get_pendown_state(ts) ||
- device_suspended(&ts->spi->dev))) {
- if (ts->pendown) {
- struct input_dev *input = ts->input;
-
- input_report_key(input, BTN_TOUCH, 0);
- input_report_abs(input, ABS_PRESSURE, 0);
- input_sync(input);
+ /* get sample */
+ ts->pendown = ts->get_pendown_state();
+ spin_lock_irq(&ts->lock);
+ if (ts->model == 7843) {
+ ts->pending = 0;
+ if (unlikely(!ts->pendown)) {
- ts->pendown = 0;
-#ifdef VERBOSE
- dev_dbg(&ts->spi->dev, "UP\n");
-#endif
- }
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+ input_sync(input_dev);
- /* measurement cycle ended */
- if (!device_suspended(&ts->spi->dev)) {
- ts->irq_disabled = 0;
- enable_irq(ts->spi->irq);
+ if (!device_suspended(&ts->spi->dev)) {
+ ts->irq_disabled = 0;
+ enable_irq(ts->spi->irq);
+ }
+ } else {
+ /* pen is still down, continue with the measurement */
+ status = spi_async(ts->spi, &ts->msg[0]);
+ if (status)
+ dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
}
- ts->pending = 0;
} else {
- /* pen is still down, continue with the measurement */
- ts->msg_idx = 0;
- ts->wait_for_sync();
- status = spi_async(ts->spi, &ts->msg[0]);
- if (status)
- dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
+ if (unlikely(ts->msg_idx && !ts->pendown)) {
+ /* measurement cycle ended */
+ if (!device_suspended(&ts->spi->dev)) {
+ ts->irq_disabled = 0;
+ enable_irq(ts->spi->irq);
+ }
+ ts->pending = 0;
+ ts->msg_idx = 0;
+ } else {
+ /* pen is still down, continue with the measurement */
+ ts->msg_idx = 0;
+ status = spi_async(ts->spi, &ts->msg[0]);
+ if (status)
+ dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
+ }
}
-
- spin_unlock(&ts->lock);
- return HRTIMER_NORESTART;
+ spin_unlock_irq(&ts->lock);
}
static irqreturn_t ads7846_irq(int irq, void *handle)
@@ -753,7 +687,8 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
unsigned long flags;
spin_lock_irqsave(&ts->lock, flags);
- if (likely(get_pendown_state(ts))) {
+
+ if (likely(ts->get_pendown_state())) {
if (!ts->irq_disabled) {
/* The ARM do_simple_IRQ() dispatcher doesn't act
* like the other dispatchers: it will report IRQs
@@ -763,8 +698,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
ts->irq_disabled = 1;
disable_irq_nosync(ts->spi->irq);
ts->pending = 1;
- hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
- HRTIMER_MODE_REL);
+ mod_timer(&ts->timer, jiffies);
}
}
spin_unlock_irqrestore(&ts->lock, flags);
@@ -785,7 +719,7 @@ static void ads7846_disable(struct ads7846 *ts)
/* are we waiting for IRQ, or polling? */
if (!ts->pending) {
ts->irq_disabled = 1;
- disable_irq(ts->spi->irq);
+ disable_irq_nosync(ts->spi->irq);
} else {
/* the timer will run at least once more, and
* leave everything in a clean state, IRQ disabled
@@ -800,6 +734,7 @@ static void ads7846_disable(struct ads7846 *ts)
/* we know the chip's in lowpower mode since we always
* leave it that way after every request
*/
+
}
/* Must be called with ts->lock held */
@@ -819,7 +754,7 @@ static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
spin_lock_irq(&ts->lock);
- ts->is_suspended = 1;
+ spi->dev.power.power_state = message;
ads7846_disable(ts);
spin_unlock_irq(&ts->lock);
@@ -834,7 +769,7 @@ static int ads7846_resume(struct spi_device *spi)
spin_lock_irq(&ts->lock);
- ts->is_suspended = 0;
+ spi->dev.power.power_state = PMSG_ON;
ads7846_enable(ts);
spin_unlock_irq(&ts->lock);
@@ -842,45 +777,13 @@ static int ads7846_resume(struct spi_device *spi)
return 0;
}
-static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
-{
- struct ads7846_platform_data *pdata = spi->dev.platform_data;
- int err;
-
- /* REVISIT when the irq can be triggered active-low, or if for some
- * reason the touchscreen isn't hooked up, we don't need to access
- * the pendown state.
- */
- if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
- dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
- return -EINVAL;
- }
-
- if (pdata->get_pendown_state) {
- ts->get_pendown_state = pdata->get_pendown_state;
- return 0;
- }
-
- err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
- if (err) {
- dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
- pdata->gpio_pendown);
- return err;
- }
-
- ts->gpio_pendown = pdata->gpio_pendown;
- return 0;
-}
-
static int __devinit ads7846_probe(struct spi_device *spi)
{
struct ads7846 *ts;
- struct ads7846_packet *packet;
struct input_dev *input_dev;
struct ads7846_platform_data *pdata = spi->dev.platform_data;
struct spi_message *m;
struct spi_transfer *x;
- int vref;
int err;
if (!spi->irq) {
@@ -900,33 +803,46 @@ static int __devinit ads7846_probe(struct spi_device *spi)
return -EINVAL;
}
+ /* REVISIT when the irq can be triggered active-low, or if for some
+ * reason the touchscreen isn't hooked up, we don't need to access
+ * the pendown state.
+ */
+ if (pdata->get_pendown_state == NULL) {
+ dev_dbg(&spi->dev, "no get_pendown_state function?\n");
+ return -EINVAL;
+ }
+
/* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
* that even if the hardware can do that, the SPI controller driver
* may not. So we stick to very-portable 8 bit words, both RX and TX.
*/
spi->bits_per_word = 8;
- spi->mode = SPI_MODE_0;
- err = spi_setup(spi);
- if (err < 0)
- return err;
ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
- packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
input_dev = input_allocate_device();
- if (!ts || !packet || !input_dev) {
+ if (!ts || !input_dev) {
err = -ENOMEM;
goto err_free_mem;
}
dev_set_drvdata(&spi->dev, ts);
- ts->packet = packet;
+ spi->dev.power.power_state = PMSG_ON;
+
ts->spi = spi;
ts->input = input_dev;
- ts->vref_mv = pdata->vref_mv;
- ts->swap_xy = pdata->swap_xy;
- hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ ts->buflen = pdata->buflen ? : MAX_BUF_SAMPLE_LEN;
+ ts->buflen = ts->buflen & ~0x1; /* must be even */
+
+ if (ads7843_setup_buffers(&spi->dev)) {
+ dev_dbg(&spi->dev, "error allocating memory for sample buffers\n");
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ init_timer(&ts->timer);
+ ts->timer.data = (unsigned long) ts;
ts->timer.function = ads7846_timer;
spin_lock_init(&ts->lock);
@@ -935,40 +851,22 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
ts->pressure_max = pdata->pressure_max ? : ~0;
+ ts->skip_samples = pdata->skip_samples ? : 0;
+ ts->rotate = pdata->rotate ? : 0;
- if (pdata->filter != NULL) {
- if (pdata->filter_init != NULL) {
- err = pdata->filter_init(pdata, &ts->filter_data);
- if (err < 0)
- goto err_free_mem;
- }
- ts->filter = pdata->filter;
- ts->filter_cleanup = pdata->filter_cleanup;
- } else if (pdata->debounce_max) {
+ if (pdata->debounce_max) {
ts->debounce_max = pdata->debounce_max;
- if (ts->debounce_max < 2)
- ts->debounce_max = 2;
ts->debounce_tol = pdata->debounce_tol;
ts->debounce_rep = pdata->debounce_rep;
- ts->filter = ads7846_debounce;
- ts->filter_data = ts;
+ if (ts->debounce_rep > ts->debounce_max + 1)
+ ts->debounce_rep = ts->debounce_max - 1;
} else
- ts->filter = ads7846_no_filter;
-
- err = setup_pendown(spi, ts);
- if (err)
- goto err_cleanup_filter;
-
- if (pdata->penirq_recheck_delay_usecs)
- ts->penirq_recheck_delay_usecs =
- pdata->penirq_recheck_delay_usecs;
-
- ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+ ts->debounce_tol = ~0;
+ ts->get_pendown_state = pdata->get_pendown_state;
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
- snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
- input_dev->name = ts->name;
+ input_dev->name = "ADS784x Touchscreen";
input_dev->phys = ts->phys;
input_dev->dev.parent = &spi->dev;
@@ -983,9 +881,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
pdata->y_max ? : MAX_12BIT,
0, 0);
input_set_abs_params(input_dev, ABS_PRESSURE,
- pdata->pressure_min, pdata->pressure_max, 0, 0);
-
- vref = pdata->keep_vref_on;
+ pdata->pressure_min ? : 0,
+ pdata->pressure_max ? : 1, 0, 0);
/* set up the transfers to read touchscreen state; this assumes we
* use formula #2 for pressure, not #3.
@@ -995,209 +892,176 @@ static int __devinit ads7846_probe(struct spi_device *spi)
spi_message_init(m);
- /* y- still on; turn on only y+ (and ADC) */
- packet->read_y = READ_Y(vref);
- x->tx_buf = &packet->read_y;
- x->len = 1;
- spi_message_add_tail(x, m);
-
- x++;
- x->rx_buf = &packet->tc.y;
- x->len = 2;
- spi_message_add_tail(x, m);
-
- /* the first sample after switching drivers can be low quality;
- * optionally discard it, using a second one after the signals
- * have had enough time to stabilize.
- */
- if (pdata->settle_delay_usecs) {
- x->delay_usecs = pdata->settle_delay_usecs;
-
- x++;
- x->tx_buf = &packet->read_y;
- x->len = 1;
+ if (ts->model == 7843) {
+ x->tx_buf = ts->txbuf;
+ x->rx_buf = ts->rxbuf;
+ x->len = ts->buflen * sizeof(u32) * 3; /* For every sample we take 3 samples and choose the better 2 */
spi_message_add_tail(x, m);
- x++;
- x->rx_buf = &packet->tc.y;
- x->len = 2;
- spi_message_add_tail(x, m);
- }
-
- m->complete = ads7846_rx_val;
- m->context = ts;
-
- m++;
- spi_message_init(m);
-
- /* turn y- off, x+ on, then leave in lowpower */
- x++;
- packet->read_x = READ_X(vref);
- x->tx_buf = &packet->read_x;
- x->len = 1;
- spi_message_add_tail(x, m);
-
- x++;
- x->rx_buf = &packet->tc.x;
- x->len = 2;
- spi_message_add_tail(x, m);
-
- /* ... maybe discard first sample ... */
- if (pdata->settle_delay_usecs) {
- x->delay_usecs = pdata->settle_delay_usecs;
+ m->complete = ads7843_rx_average;
+ m->context = ts;
- x++;
- x->tx_buf = &packet->read_x;
+ ts->last_msg = m;
+ } else {
+ /* y- still on; turn on only y+ (and ADC) */
+ ts->read_y = READ_Y;
+ x->tx_buf = &ts->read_y;
x->len = 1;
spi_message_add_tail(x, m);
x++;
- x->rx_buf = &packet->tc.x;
+ x->rx_buf = &ts->tc.y;
x->len = 2;
spi_message_add_tail(x, m);
- }
- m->complete = ads7846_rx_val;
- m->context = ts;
+ m->complete = ads7846_debounce;
+ m->context = ts;
- /* turn y+ off, x- on; we'll use formula #2 */
- if (ts->model == 7846) {
m++;
spi_message_init(m);
+ /* turn y- off, x+ on, then leave in lowpower */
x++;
- packet->read_z1 = READ_Z1(vref);
- x->tx_buf = &packet->read_z1;
+ ts->read_x = READ_X;
+ x->tx_buf = &ts->read_x;
x->len = 1;
spi_message_add_tail(x, m);
x++;
- x->rx_buf = &packet->tc.z1;
+ x->rx_buf = &ts->tc.x;
x->len = 2;
spi_message_add_tail(x, m);
- /* ... maybe discard first sample ... */
- if (pdata->settle_delay_usecs) {
- x->delay_usecs = pdata->settle_delay_usecs;
+ m->complete = ads7846_debounce;
+ m->context = ts;
+
+ /* turn y+ off, x- on; we'll use formula #2 */
+ if (ts->model == 7846) {
+ m++;
+ spi_message_init(m);
x++;
- x->tx_buf = &packet->read_z1;
+ ts->read_z1 = READ_Z1;
+ x->tx_buf = &ts->read_z1;
x->len = 1;
spi_message_add_tail(x, m);
x++;
- x->rx_buf = &packet->tc.z1;
+ x->rx_buf = &ts->tc.z1;
x->len = 2;
spi_message_add_tail(x, m);
- }
-
- m->complete = ads7846_rx_val;
- m->context = ts;
-
- m++;
- spi_message_init(m);
- x++;
- packet->read_z2 = READ_Z2(vref);
- x->tx_buf = &packet->read_z2;
- x->len = 1;
- spi_message_add_tail(x, m);
-
- x++;
- x->rx_buf = &packet->tc.z2;
- x->len = 2;
- spi_message_add_tail(x, m);
+ m->complete = ads7846_debounce;
+ m->context = ts;
- /* ... maybe discard first sample ... */
- if (pdata->settle_delay_usecs) {
- x->delay_usecs = pdata->settle_delay_usecs;
+ m++;
+ spi_message_init(m);
x++;
- x->tx_buf = &packet->read_z2;
+ ts->read_z2 = READ_Z2;
+ x->tx_buf = &ts->read_z2;
x->len = 1;
spi_message_add_tail(x, m);
x++;
- x->rx_buf = &packet->tc.z2;
+ x->rx_buf = &ts->tc.z2;
x->len = 2;
spi_message_add_tail(x, m);
- }
- m->complete = ads7846_rx_val;
- m->context = ts;
- }
+ m->complete = ads7846_debounce;
+ m->context = ts;
+ }
- /* power down */
- m++;
- spi_message_init(m);
+ /* power down */
+ m++;
+ spi_message_init(m);
- x++;
- packet->pwrdown = PWRDOWN;
- x->tx_buf = &packet->pwrdown;
- x->len = 1;
- spi_message_add_tail(x, m);
+ x++;
+ ts->pwrdown = PWRDOWN;
+ x->tx_buf = &ts->pwrdown;
+ x->len = 1;
+ spi_message_add_tail(x, m);
- x++;
- x->rx_buf = &packet->dummy;
- x->len = 2;
- CS_CHANGE(*x);
- spi_message_add_tail(x, m);
+ x++;
+ x->rx_buf = &ts->dummy;
+ x->len = 2;
+ CS_CHANGE(*x);
+ spi_message_add_tail(x, m);
- m->complete = ads7846_rx;
- m->context = ts;
+ m->complete = ads7846_rx;
+ m->context = ts;
- ts->last_msg = m;
+ ts->last_msg = m;
+ }
if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
spi->dev.driver->name, ts)) {
- dev_info(&spi->dev,
- "trying pin change workaround on irq %d\n", spi->irq);
- err = request_irq(spi->irq, ads7846_irq,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- spi->dev.driver->name, ts);
- if (err) {
- dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
- goto err_free_gpio;
- }
+ dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+ err = -EBUSY;
+ goto err_free_buf;
}
- err = ads784x_hwmon_register(spi, ts);
- if (err)
- goto err_free_irq;
-
dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
- /* take a first sample, leaving nPENIRQ active and vREF off; avoid
+ /* take a first sample, leaving nPENIRQ active; avoid
* the touchscreen, in case it's not connected.
*/
- (void) ads7846_read12_ser(&spi->dev,
- READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
+ if (ts->model != 7843) {
+ /* take a first sample, leaving nPENIRQ active; avoid
+ * the touchscreen, in case it's not connected.
+ */
+ (void) ads7846_read12_ser(&spi->dev,
+ READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
+ }
- err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
- if (err)
- goto err_remove_hwmon;
+ /* ads7843/7845 don't have temperature sensors, and
+ * use the other sensors a bit differently too
+ */
+ if (ts->model == 7846) {
+ device_create_file(&spi->dev, &dev_attr_temp0);
+ device_create_file(&spi->dev, &dev_attr_temp1);
+ }
+
+ if (ts->model != 7845 && ts->model != 7843)
+ device_create_file(&spi->dev, &dev_attr_vbatt);
+
+ if (ts->model != 7843) {
+ device_create_file(&spi->dev, &dev_attr_vaux);
+ }
+
+ device_create_file(&spi->dev, &dev_attr_pen_down);
+ device_create_file(&spi->dev, &dev_attr_disable);
err = input_register_device(input_dev);
if (err)
- goto err_remove_attr_group;
+ goto err_remove_attr;
return 0;
- err_remove_attr_group:
- sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
- err_remove_hwmon:
- ads784x_hwmon_unregister(spi, ts);
- err_free_irq:
+ err_remove_attr:
+ device_remove_file(&spi->dev, &dev_attr_disable);
+ device_remove_file(&spi->dev, &dev_attr_pen_down);
+ if (ts->model == 7846) {
+ device_remove_file(&spi->dev, &dev_attr_temp1);
+ device_remove_file(&spi->dev, &dev_attr_temp0);
+ }
+
+ if (ts->model != 7845 && ts->model != 7843)
+ device_remove_file(&spi->dev, &dev_attr_vbatt);
+
+ if (ts->model != 7843) {
+ device_remove_file(&spi->dev, &dev_attr_vaux);
+ }
+
free_irq(spi->irq, ts);
- err_free_gpio:
- if (ts->gpio_pendown != -1)
- gpio_free(ts->gpio_pendown);
- err_cleanup_filter:
- if (ts->filter_cleanup)
- ts->filter_cleanup(ts->filter_data);
+
+ err_free_buf:
+ if (ts->txbuf)
+ kfree(ts->txbuf);
+ if (ts->rxbuf)
+ kfree(ts->rxbuf);
err_free_mem:
input_free_device(input_dev);
- kfree(packet);
kfree(ts);
return err;
}
@@ -1206,24 +1070,33 @@ static int __devexit ads7846_remove(struct spi_device *spi)
{
struct ads7846 *ts = dev_get_drvdata(&spi->dev);
- ads784x_hwmon_unregister(spi, ts);
input_unregister_device(ts->input);
ads7846_suspend(spi, PMSG_SUSPEND);
- sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
+ if (ts->txbuf)
+ kfree(ts->txbuf);
+ if (ts->rxbuf)
+ kfree(ts->rxbuf);
- free_irq(ts->spi->irq, ts);
- /* suspend left the IRQ disabled */
- enable_irq(ts->spi->irq);
+ device_remove_file(&spi->dev, &dev_attr_disable);
+ device_remove_file(&spi->dev, &dev_attr_pen_down);
+ if (ts->model == 7846) {
+ device_remove_file(&spi->dev, &dev_attr_temp1);
+ device_remove_file(&spi->dev, &dev_attr_temp0);
+ }
+
+ if (ts->model != 7845 && ts->model != 7843)
+ device_remove_file(&spi->dev, &dev_attr_vbatt);
- if (ts->gpio_pendown != -1)
- gpio_free(ts->gpio_pendown);
+ if (ts->model != 7843) {
+ device_remove_file(&spi->dev, &dev_attr_vaux);
+ }
- if (ts->filter_cleanup)
- ts->filter_cleanup(ts->filter_data);
+ free_irq(ts->spi->irq, ts);
+ /* suspend left the IRQ disabled */
+ disable_irq_nosync(ts->spi->irq);
- kfree(ts->packet);
kfree(ts);
dev_dbg(&spi->dev, "unregistered touchscreen\n");
diff --git a/drivers/input/touchscreen/mxc_ts.c b/drivers/input/touchscreen/mxc_ts.c
index 610f31e65778..6146b27f01da 100644
--- a/drivers/input/touchscreen/mxc_ts.c
+++ b/drivers/input/touchscreen/mxc_ts.c
@@ -76,8 +76,7 @@ static int ts_thread(void *arg)
msleep(20);
continue;
}
- if (!(ts_sample.contact_resistance || wait))
- {
+ if (!(ts_sample.contact_resistance || wait)) {
msleep(20);
continue;
}
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-21 17:00:01 +0000