summaryrefslogtreecommitdiff
path: root/drivers/isdn/hisax/nj_s.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/hisax/nj_s.c')
-rw-r--r--drivers/isdn/hisax/nj_s.c194
1 files changed, 108 insertions, 86 deletions
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index c09ffb135330..fa2db87667c8 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -148,107 +148,87 @@ NETjet_S_card_msg(struct IsdnCardState *cs, int mt, void *arg)
return(0);
}
-static struct pci_dev *dev_netjet __devinitdata = NULL;
-
-int __devinit
-setup_netjet_s(struct IsdnCard *card)
+static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
+ struct IsdnCardState *cs)
{
- int bytecnt,cfg;
- struct IsdnCardState *cs = card->cs;
- char tmp[64];
+ int cfg;
-#ifdef __BIG_ENDIAN
-#error "not running on big endian machines now"
-#endif
- strcpy(tmp, NETjet_S_revision);
- printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
- if (cs->typ != ISDN_CTYPE_NETJET_S)
+ if (pci_enable_device(dev_netjet))
return(0);
- test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
+ pci_set_master(dev_netjet);
+ cs->irq = dev_netjet->irq;
+ if (!cs->irq) {
+ printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
+ return(0);
+ }
+ cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
+ if (!cs->hw.njet.base) {
+ printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
+ return(0);
+ }
+ /* the TJ300 and TJ320 must be detected, the IRQ handling is different
+ * unfortunatly the chips use the same device ID, but the TJ320 has
+ * the bit20 in status PCI cfg register set
+ */
+ pci_read_config_dword(dev_netjet, 0x04, &cfg);
+ if (cfg & 0x00100000)
+ cs->subtyp = 1; /* TJ320 */
+ else
+ cs->subtyp = 0; /* TJ300 */
+ /* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
+ if ((dev_netjet->subsystem_vendor == 0x55) &&
+ (dev_netjet->subsystem_device == 0x02)) {
+ printk(KERN_WARNING "Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
+ printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
+ return(0);
+ }
+ /* end new code */
-#ifdef CONFIG_PCI
+ return(1);
+}
- for ( ;; )
- {
- if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
- PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
- if (pci_enable_device(dev_netjet))
- return(0);
- pci_set_master(dev_netjet);
- cs->irq = dev_netjet->irq;
- if (!cs->irq) {
- printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
- return(0);
- }
- cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
- if (!cs->hw.njet.base) {
- printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
- return(0);
- }
- /* the TJ300 and TJ320 must be detected, the IRQ handling is different
- * unfortunatly the chips use the same device ID, but the TJ320 has
- * the bit20 in status PCI cfg register set
- */
- pci_read_config_dword(dev_netjet, 0x04, &cfg);
- if (cfg & 0x00100000)
- cs->subtyp = 1; /* TJ320 */
- else
- cs->subtyp = 0; /* TJ300 */
- /* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
- if ((dev_netjet->subsystem_vendor == 0x55) &&
- (dev_netjet->subsystem_device == 0x02)) {
- printk(KERN_WARNING "Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
- printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
- return(0);
- }
- /* end new code */
- } else {
- printk(KERN_WARNING "NETjet-S: No PCI card found\n");
- return(0);
- }
+static int __devinit njs_cs_init(struct IsdnCard *card,
+ struct IsdnCardState *cs)
+{
- cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
- cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
+ cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
+ cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
- cs->hw.njet.ctrl_reg = 0xff; /* Reset On */
- byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
- mdelay(10);
+ cs->hw.njet.ctrl_reg = 0xff; /* Reset On */
+ byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
+ mdelay(10);
- cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */
- byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
- mdelay(10);
+ cs->hw.njet.ctrl_reg = 0x00; /* Reset Off and status read clear */
+ byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
+ mdelay(10);
- cs->hw.njet.auxd = 0xC0;
- cs->hw.njet.dmactrl = 0;
+ cs->hw.njet.auxd = 0xC0;
+ cs->hw.njet.dmactrl = 0;
- byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
- byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
- byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
+ byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
+ byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
+ byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
- switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
- {
- case 0 :
- break;
+ switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
+ {
+ case 0 :
+ return 1; /* end loop */
- case 3 :
- printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
- continue;
+ case 3 :
+ printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
+ return -1; /* continue looping */
- default :
- printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
- return 0;
- }
- break;
+ default :
+ printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
+ return 0; /* end loop & function */
}
-#else
-
- printk(KERN_WARNING "NETjet-S: NO_PCI_BIOS\n");
- printk(KERN_WARNING "NETjet-S: unable to config NETJET-S PCI\n");
- return (0);
-
-#endif /* CONFIG_PCI */
+ return 1; /* end loop */
+}
- bytecnt = 256;
+static int __devinit njs_cs_init_rest(struct IsdnCard *card,
+ struct IsdnCardState *cs)
+{
+ const int bytecnt = 256;
printk(KERN_INFO
"NETjet-S: %s card configured at %#lx IRQ %d\n",
@@ -273,5 +253,47 @@ setup_netjet_s(struct IsdnCard *card)
cs->irq_func = &netjet_s_interrupt;
cs->irq_flags |= IRQF_SHARED;
ISACVersion(cs, "NETjet-S:");
+
return (1);
}
+
+static struct pci_dev *dev_netjet __devinitdata = NULL;
+
+int __devinit
+setup_netjet_s(struct IsdnCard *card)
+{
+ int ret;
+ struct IsdnCardState *cs = card->cs;
+ char tmp[64];
+
+#ifdef __BIG_ENDIAN
+#error "not running on big endian machines now"
+#endif
+ strcpy(tmp, NETjet_S_revision);
+ printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
+ if (cs->typ != ISDN_CTYPE_NETJET_S)
+ return(0);
+ test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
+
+ for ( ;; )
+ {
+ if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+ PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
+ ret = njs_pci_probe(dev_netjet, cs);
+ if (!ret)
+ return(0);
+ } else {
+ printk(KERN_WARNING "NETjet-S: No PCI card found\n");
+ return(0);
+ }
+
+ ret = njs_cs_init(card, cs);
+ if (!ret)
+ return(0);
+ if (ret > 0)
+ break;
+ /* otherwise, ret < 0, continue looping */
+ }
+
+ return njs_cs_init_rest(card, cs);
+}
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 05:23:36 +0000