diff options
Diffstat (limited to 'drivers/media/rc/redrat3.c')
| -rw-r--r-- | drivers/media/rc/redrat3.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index aad9526f3754..c39227661047 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -405,7 +405,7 @@ static int redrat3_send_cmd(int cmd, struct redrat3_dev *rr3) udev = rr3->udev; res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0000, 0x0000, data, sizeof(u8), HZ * 10); + 0x0000, 0x0000, data, sizeof(u8), 10000); if (res < 0) { dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d", @@ -481,7 +481,7 @@ static u32 redrat3_get_timeout(struct redrat3_dev *rr3) pipe = usb_rcvctrlpipe(rr3->udev, 0); ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5); + RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000); if (ret != len) dev_warn(rr3->dev, "Failed to read timeout from hardware\n"); else { @@ -511,7 +511,7 @@ static int redrat3_set_timeout(struct rc_dev *rc_dev, unsigned int timeoutns) ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout), - HZ * 25); + 25000); dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n", be32_to_cpu(*timeout), ret); @@ -543,32 +543,32 @@ static void redrat3_reset(struct redrat3_dev *rr3) *val = 0x01; rc = usb_control_msg(udev, rxpipe, RR3_RESET, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25); + RR3_CPUCS_REG_ADDR, 0, val, len, 25000); dev_dbg(dev, "reset returned 0x%02x\n", rc); *val = length_fuzz; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25); + RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000); dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc); *val = (65536 - (minimum_pause * 2000)) / 256; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25); + RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000); dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc); *val = periods_measure_carrier; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25); + RR3_IR_IO_PERIODS_MF, 0, val, len, 25000); dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val, rc); *val = RR3_DRIVER_MAXLENS; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25); + RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000); dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc); kfree(val); @@ -586,7 +586,7 @@ static void redrat3_get_firmware_rev(struct redrat3_dev *rr3) rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0), RR3_FW_VERSION, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5); + 0, 0, buffer, RR3_FW_VERSION_LEN, 5000); if (rc >= 0) dev_info(rr3->dev, "Firmware rev: %s", buffer); @@ -826,14 +826,14 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf, pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress); ret = usb_bulk_msg(rr3->udev, pipe, irdata, - sendbuf_len, &ret_len, 10 * HZ); + sendbuf_len, &ret_len, 10000); dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret); /* now tell the hardware to transmit what we sent it */ pipe = usb_rcvctrlpipe(rr3->udev, 0); ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, 0, irdata, 2, HZ * 10); + 0, 0, irdata, 2, 10000); if (ret < 0) dev_err(dev, "Error: control msg send failed, rc %d\n", ret); |