diff options
Diffstat (limited to 'drivers/media/usb/dvb-usb-v2')
21 files changed, 801 insertions, 614 deletions
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig index 692224d97d06..a3c8ecf22078 100644 --- a/drivers/media/usb/dvb-usb-v2/Kconfig +++ b/drivers/media/usb/dvb-usb-v2/Kconfig @@ -13,10 +13,6 @@ config DVB_USB_V2 Say Y if you own a USB DVB device. -config DVB_USB_CYPRESS_FIRMWARE - tristate "Cypress firmware helper routines" - depends on DVB_USB_V2 - config DVB_USB_AF9015 tristate "Afatech AF9015 DVB-T USB2.0 support" depends on DVB_USB_V2 @@ -41,6 +37,7 @@ config DVB_USB_AF9035 select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_IT913X if MEDIA_SUBDRV_AUTOSELECT help Say Y here to support the Afatech AF9035 based DVB USB receiver. @@ -72,7 +69,7 @@ config DVB_USB_AU6610 config DVB_USB_AZ6007 tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support" depends on DVB_USB_V2 - select DVB_USB_CYPRESS_FIRMWARE + select CYPRESS_FIRMWARE select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT help @@ -146,6 +143,7 @@ config DVB_USB_RTL28XXU select MEDIA_TUNER_FC0013 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_E4000 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_R820T if MEDIA_SUBDRV_AUTOSELECT help Say Y here to support the Realtek RTL28xxU DVB USB receiver. diff --git a/drivers/media/usb/dvb-usb-v2/Makefile b/drivers/media/usb/dvb-usb-v2/Makefile index b76f58e6c64f..2c06714b9ef0 100644 --- a/drivers/media/usb/dvb-usb-v2/Makefile +++ b/drivers/media/usb/dvb-usb-v2/Makefile @@ -1,9 +1,6 @@ dvb_usb_v2-objs := dvb_usb_core.o dvb_usb_urb.o usb_urb.o obj-$(CONFIG_DVB_USB_V2) += dvb_usb_v2.o -dvb_usb_cypress_firmware-objs := cypress_firmware.o -obj-$(CONFIG_DVB_USB_CYPRESS_FIRMWARE) += dvb_usb_cypress_firmware.o - dvb-usb-af9015-objs := af9015.o obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o @@ -46,4 +43,4 @@ obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o ccflags-y += -I$(srctree)/drivers/media/dvb-core ccflags-y += -I$(srctree)/drivers/media/dvb-frontends ccflags-y += -I$(srctree)/drivers/media/tuners - +ccflags-y += -I$(srctree)/drivers/media/common diff --git a/drivers/media/usb/dvb-usb-v2/af9015.c b/drivers/media/usb/dvb-usb-v2/af9015.c index b86d0f27a398..d556042cf312 100644 --- a/drivers/media/usb/dvb-usb-v2/af9015.c +++ b/drivers/media/usb/dvb-usb-v2/af9015.c @@ -30,22 +30,22 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) { -#define BUF_LEN 63 #define REQ_HDR_LEN 8 /* send header size */ #define ACK_HDR_LEN 2 /* rece header size */ struct af9015_state *state = d_to_priv(d); int ret, wlen, rlen; - u8 buf[BUF_LEN]; u8 write = 1; - buf[0] = req->cmd; - buf[1] = state->seq++; - buf[2] = req->i2c_addr; - buf[3] = req->addr >> 8; - buf[4] = req->addr & 0xff; - buf[5] = req->mbox; - buf[6] = req->addr_len; - buf[7] = req->data_len; + mutex_lock(&d->usb_mutex); + + state->buf[0] = req->cmd; + state->buf[1] = state->seq++; + state->buf[2] = req->i2c_addr; + state->buf[3] = req->addr >> 8; + state->buf[4] = req->addr & 0xff; + state->buf[5] = req->mbox; + state->buf[6] = req->addr_len; + state->buf[7] = req->data_len; switch (req->cmd) { case GET_CONFIG: @@ -55,14 +55,14 @@ static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) break; case READ_I2C: write = 0; - buf[2] |= 0x01; /* set I2C direction */ + state->buf[2] |= 0x01; /* set I2C direction */ case WRITE_I2C: - buf[0] = READ_WRITE_I2C; + state->buf[0] = READ_WRITE_I2C; break; case WRITE_MEMORY: if (((req->addr & 0xff00) == 0xff00) || ((req->addr & 0xff00) == 0xae00)) - buf[0] = WRITE_VIRTUAL_MEMORY; + state->buf[0] = WRITE_VIRTUAL_MEMORY; case WRITE_VIRTUAL_MEMORY: case COPY_FIRMWARE: case DOWNLOAD_FIRMWARE: @@ -90,7 +90,7 @@ static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) rlen = ACK_HDR_LEN; if (write) { wlen += req->data_len; - memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len); + memcpy(&state->buf[REQ_HDR_LEN], req->data, req->data_len); } else { rlen += req->data_len; } @@ -99,22 +99,25 @@ static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) rlen = 0; - ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen); + ret = dvb_usbv2_generic_rw_locked(d, + state->buf, wlen, state->buf, rlen); if (ret) goto error; /* check status */ - if (rlen && buf[1]) { + if (rlen && state->buf[1]) { dev_err(&d->udev->dev, "%s: command failed=%d\n", - KBUILD_MODNAME, buf[1]); + KBUILD_MODNAME, state->buf[1]); ret = -EIO; goto error; } /* read request, copy returned data to return buf */ if (!write) - memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len); + memcpy(req->data, &state->buf[ACK_HDR_LEN], req->data_len); error: + mutex_unlock(&d->usb_mutex); + return ret; } @@ -1317,6 +1320,43 @@ static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) #define af9015_get_rc_config NULL #endif +static int af9015_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + char manufacturer[sizeof("ITE Technologies, Inc.")]; + + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(udev, udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + /* + * There is two devices having same ID but different chipset. One uses + * AF9015 and the other IT9135 chipset. Only difference seen on lsusb + * is iManufacturer string. + * + * idVendor 0x0ccd TerraTec Electronic GmbH + * idProduct 0x0099 + * bcdDevice 2.00 + * iManufacturer 1 Afatech + * iProduct 2 DVB-T 2 + * + * idVendor 0x0ccd TerraTec Electronic GmbH + * idProduct 0x0099 + * bcdDevice 2.00 + * iManufacturer 1 ITE Technologies, Inc. + * iProduct 2 DVB-T TV Stick + */ + if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) && + (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) { + if (!strcmp("ITE Technologies, Inc.", manufacturer)) { + dev_dbg(&udev->dev, "%s: rejecting device\n", __func__); + return -ENODEV; + } + } + + return dvb_usbv2_probe(intf, id); +} + /* interface 0 is used by DVB-T receiver and interface 1 is for remote controller (HID) */ static struct dvb_usb_device_properties af9015_props = { @@ -1425,6 +1465,7 @@ static const struct usb_device_id af9015_id_table[] = { &af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC, &af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) }, + /* XXX: that same ID [0ccd:0099] is used by af9035 driver too */ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC, &af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) }, { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T, @@ -1441,7 +1482,7 @@ MODULE_DEVICE_TABLE(usb, af9015_id_table); static struct usb_driver af9015_usb_driver = { .name = KBUILD_MODNAME, .id_table = af9015_id_table, - .probe = dvb_usbv2_probe, + .probe = af9015_probe, .disconnect = dvb_usbv2_disconnect, .suspend = dvb_usbv2_suspend, .resume = dvb_usbv2_resume, diff --git a/drivers/media/usb/dvb-usb-v2/af9015.h b/drivers/media/usb/dvb-usb-v2/af9015.h index 533637dedd23..3a6f3ad1eadb 100644 --- a/drivers/media/usb/dvb-usb-v2/af9015.h +++ b/drivers/media/usb/dvb-usb-v2/af9015.h @@ -115,7 +115,9 @@ enum af9015_ir_mode { AF9015_IR_MODE_POLLING, /* just guess */ }; +#define BUF_LEN 63 struct af9015_state { + u8 buf[BUF_LEN]; /* bulk USB control message */ u8 ir_mode; u8 rc_repeat; u32 rc_keycode; diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index f11cc42454f0..b638fc1cd574 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -41,79 +41,84 @@ static u16 af9035_checksum(const u8 *buf, size_t len) static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) { -#define BUF_LEN 64 #define REQ_HDR_LEN 4 /* send header size */ #define ACK_HDR_LEN 3 /* rece header size */ #define CHECKSUM_LEN 2 #define USB_TIMEOUT 2000 struct state *state = d_to_priv(d); int ret, wlen, rlen; - u8 buf[BUF_LEN]; u16 checksum, tmp_checksum; + mutex_lock(&d->usb_mutex); + /* buffer overflow check */ if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) || req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { dev_err(&d->udev->dev, "%s: too much data wlen=%d rlen=%d\n", __func__, req->wlen, req->rlen); - return -EINVAL; + ret = -EINVAL; + goto exit; } - buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1; - buf[1] = req->mbox; - buf[2] = req->cmd; - buf[3] = state->seq++; - memcpy(&buf[REQ_HDR_LEN], req->wbuf, req->wlen); + state->buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1; + state->buf[1] = req->mbox; + state->buf[2] = req->cmd; + state->buf[3] = state->seq++; + memcpy(&state->buf[REQ_HDR_LEN], req->wbuf, req->wlen); wlen = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN; rlen = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN; /* calc and add checksum */ - checksum = af9035_checksum(buf, buf[0] - 1); - buf[buf[0] - 1] = (checksum >> 8); - buf[buf[0] - 0] = (checksum & 0xff); + checksum = af9035_checksum(state->buf, state->buf[0] - 1); + state->buf[state->buf[0] - 1] = (checksum >> 8); + state->buf[state->buf[0] - 0] = (checksum & 0xff); /* no ack for these packets */ if (req->cmd == CMD_FW_DL) rlen = 0; - ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen); + ret = dvb_usbv2_generic_rw_locked(d, + state->buf, wlen, state->buf, rlen); if (ret) - goto err; + goto exit; /* no ack for those packets */ if (req->cmd == CMD_FW_DL) goto exit; /* verify checksum */ - checksum = af9035_checksum(buf, rlen - 2); - tmp_checksum = (buf[rlen - 2] << 8) | buf[rlen - 1]; + checksum = af9035_checksum(state->buf, rlen - 2); + tmp_checksum = (state->buf[rlen - 2] << 8) | state->buf[rlen - 1]; if (tmp_checksum != checksum) { dev_err(&d->udev->dev, "%s: command=%02x checksum mismatch " \ "(%04x != %04x)\n", KBUILD_MODNAME, req->cmd, tmp_checksum, checksum); ret = -EIO; - goto err; + goto exit; } /* check status */ - if (buf[2]) { + if (state->buf[2]) { + /* fw returns status 1 when IR code was not received */ + if (req->cmd == CMD_IR_GET || state->buf[2] == 1) { + ret = 1; + goto exit; + } + dev_dbg(&d->udev->dev, "%s: command=%02x failed fw error=%d\n", - __func__, req->cmd, buf[2]); + __func__, req->cmd, state->buf[2]); ret = -EIO; - goto err; + goto exit; } /* read request, copy returned data to return buf */ if (req->rlen) - memcpy(req->rbuf, &buf[ACK_HDR_LEN], req->rlen); - + memcpy(req->rbuf, &state->buf[ACK_HDR_LEN], req->rlen); exit: - return 0; - -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - + mutex_unlock(&d->usb_mutex); + if (ret < 0) + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } @@ -292,12 +297,40 @@ static struct i2c_algorithm af9035_i2c_algo = { static int af9035_identify_state(struct dvb_usb_device *d, const char **name) { + struct state *state = d_to_priv(d); int ret; u8 wbuf[1] = { 1 }; u8 rbuf[4]; struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf, sizeof(rbuf), rbuf }; + ret = af9035_rd_regs(d, 0x1222, rbuf, 3); + if (ret < 0) + goto err; + + state->chip_version = rbuf[0]; + state->chip_type = rbuf[2] << 8 | rbuf[1] << 0; + + ret = af9035_rd_reg(d, 0x384f, &state->prechip_version); + if (ret < 0) + goto err; + + dev_info(&d->udev->dev, + "%s: prechip_version=%02x chip_version=%02x chip_type=%04x\n", + __func__, state->prechip_version, state->chip_version, + state->chip_type); + + if (state->chip_type == 0x9135) { + if (state->chip_version == 0x02) + *name = AF9035_FIRMWARE_IT9135_V2; + else + *name = AF9035_FIRMWARE_IT9135_V1; + state->eeprom_addr = EEPROM_BASE_IT9135; + } else { + *name = AF9035_FIRMWARE_AF9035; + state->eeprom_addr = EEPROM_BASE_AF9035; + } + ret = af9035_ctrl_msg(d, &req); if (ret < 0) goto err; @@ -316,66 +349,19 @@ err: return ret; } -static int af9035_download_firmware(struct dvb_usb_device *d, +static int af9035_download_firmware_old(struct dvb_usb_device *d, const struct firmware *fw) { int ret, i, j, len; u8 wbuf[1]; - u8 rbuf[4]; struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; struct usb_req req_fw_dl = { CMD_FW_DL, 0, 0, wbuf, 0, NULL }; - struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ; - u8 hdr_core, tmp; + u8 hdr_core; u16 hdr_addr, hdr_data_len, hdr_checksum; #define MAX_DATA 58 #define HDR_SIZE 7 /* - * In case of dual tuner configuration we need to do some extra - * initialization in order to download firmware to slave demod too, - * which is done by master demod. - * Master feeds also clock and controls power via GPIO. - */ - ret = af9035_rd_reg(d, EEPROM_DUAL_MODE, &tmp); - if (ret < 0) - goto err; - - if (tmp) { - /* configure gpioh1, reset & power slave demod */ - ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01); - if (ret < 0) - goto err; - - ret = af9035_wr_reg_mask(d, 0x00d8b1, 0x01, 0x01); - if (ret < 0) - goto err; - - ret = af9035_wr_reg_mask(d, 0x00d8af, 0x00, 0x01); - if (ret < 0) - goto err; - - usleep_range(10000, 50000); - - ret = af9035_wr_reg_mask(d, 0x00d8af, 0x01, 0x01); - if (ret < 0) - goto err; - - /* tell the slave I2C address */ - ret = af9035_rd_reg(d, EEPROM_2ND_DEMOD_ADDR, &tmp); - if (ret < 0) - goto err; - - ret = af9035_wr_reg(d, 0x00417f, tmp); - if (ret < 0) - goto err; - - /* enable clock out */ - ret = af9035_wr_reg_mask(d, 0x00d81a, 0x01, 0x01); - if (ret < 0) - goto err; - } - - /* * Thanks to Daniel Glöckner <daniel-gl@gmx.net> about that info! * * byte 0: MCS 51 core @@ -441,28 +427,6 @@ static int af9035_download_firmware(struct dvb_usb_device *d, if (i) dev_warn(&d->udev->dev, "%s: bad firmware\n", KBUILD_MODNAME); - /* firmware loaded, request boot */ - req.cmd = CMD_FW_BOOT; - ret = af9035_ctrl_msg(d, &req); - if (ret < 0) - goto err; - - /* ensure firmware starts */ - wbuf[0] = 1; - ret = af9035_ctrl_msg(d, &req_fw_ver); - if (ret < 0) - goto err; - - if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) { - dev_err(&d->udev->dev, "%s: firmware did not run\n", - KBUILD_MODNAME); - ret = -ENODEV; - goto err; - } - - dev_info(&d->udev->dev, "%s: firmware version=%d.%d.%d.%d", - KBUILD_MODNAME, rbuf[0], rbuf[1], rbuf[2], rbuf[3]); - return 0; err: @@ -471,15 +435,11 @@ err: return ret; } -static int af9035_download_firmware_it9135(struct dvb_usb_device *d, +static int af9035_download_firmware_new(struct dvb_usb_device *d, const struct firmware *fw) { int ret, i, i_prev; - u8 wbuf[1]; - u8 rbuf[4]; - struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; struct usb_req req_fw_dl = { CMD_FW_SCATTER_WR, 0, 0, NULL, 0, NULL }; - struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ; #define HDR_SIZE 7 /* @@ -494,7 +454,6 @@ static int af9035_download_firmware_it9135(struct dvb_usb_device *d, * 5: addr LSB * 6: count of data bytes ? */ - for (i = HDR_SIZE, i_prev = 0; i <= fw->size; i++) { if (i == fw->size || (fw->data[i + 0] == 0x03 && @@ -513,6 +472,86 @@ static int af9035_download_firmware_it9135(struct dvb_usb_device *d, } } + return 0; + +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9035_download_firmware(struct dvb_usb_device *d, + const struct firmware *fw) +{ + struct state *state = d_to_priv(d); + int ret; + u8 wbuf[1]; + u8 rbuf[4]; + u8 tmp; + struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; + struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + + /* + * In case of dual tuner configuration we need to do some extra + * initialization in order to download firmware to slave demod too, + * which is done by master demod. + * Master feeds also clock and controls power via GPIO. + */ + ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_DUAL_MODE, &tmp); + if (ret < 0) + goto err; + + if (tmp) { + /* configure gpioh1, reset & power slave demod */ + ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01); + if (ret < 0) + goto err; + + ret = af9035_wr_reg_mask(d, 0x00d8b1, 0x01, 0x01); + if (ret < 0) + goto err; + + ret = af9035_wr_reg_mask(d, 0x00d8af, 0x00, 0x01); + if (ret < 0) + goto err; + + usleep_range(10000, 50000); + + ret = af9035_wr_reg_mask(d, 0x00d8af, 0x01, 0x01); + if (ret < 0) + goto err; + + /* tell the slave I2C address */ + ret = af9035_rd_reg(d, + state->eeprom_addr + EEPROM_2ND_DEMOD_ADDR, + &tmp); + if (ret < 0) + goto err; + + if (state->chip_type == 0x9135) { + ret = af9035_wr_reg(d, 0x004bfb, tmp); + if (ret < 0) + goto err; + } else { + ret = af9035_wr_reg(d, 0x00417f, tmp); + if (ret < 0) + goto err; + + /* enable clock out */ + ret = af9035_wr_reg_mask(d, 0x00d81a, 0x01, 0x01); + if (ret < 0) + goto err; + } + } + + if (fw->data[0] == 0x01) + ret = af9035_download_firmware_old(d, fw); + else + ret = af9035_download_firmware_new(d, fw); + if (ret < 0) + goto err; + /* firmware loaded, request boot */ req.cmd = CMD_FW_BOOT; ret = af9035_ctrl_msg(d, &req); @@ -546,15 +585,42 @@ err: static int af9035_read_config(struct dvb_usb_device *d) { struct state *state = d_to_priv(d); - int ret, i, eeprom_shift = 0; + int ret, i; u8 tmp; - u16 tmp16; + u16 tmp16, addr; /* demod I2C "address" */ state->af9033_config[0].i2c_addr = 0x38; + state->af9033_config[0].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; + state->af9033_config[1].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; + state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB; + state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL; + + /* eeprom memory mapped location */ + if (state->chip_type == 0x9135) { + if (state->chip_version == 0x02) { + state->af9033_config[0].tuner = AF9033_TUNER_IT9135_60; + state->af9033_config[1].tuner = AF9033_TUNER_IT9135_60; + tmp16 = 0x00461d; + } else { + state->af9033_config[0].tuner = AF9033_TUNER_IT9135_38; + state->af9033_config[1].tuner = AF9033_TUNER_IT9135_38; + tmp16 = 0x00461b; + } + + /* check if eeprom exists */ + ret = af9035_rd_reg(d, tmp16, &tmp); + if (ret < 0) + goto err; + + if (tmp == 0x00) { + dev_dbg(&d->udev->dev, "%s: no eeprom\n", __func__); + goto skip_eeprom; + } + } /* check if there is dual tuners */ - ret = af9035_rd_reg(d, EEPROM_DUAL_MODE, &tmp); + ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_DUAL_MODE, &tmp); if (ret < 0) goto err; @@ -564,7 +630,9 @@ static int af9035_read_config(struct dvb_usb_device *d) if (state->dual_mode) { /* read 2nd demodulator I2C address */ - ret = af9035_rd_reg(d, EEPROM_2ND_DEMOD_ADDR, &tmp); + ret = af9035_rd_reg(d, + state->eeprom_addr + EEPROM_2ND_DEMOD_ADDR, + &tmp); if (ret < 0) goto err; @@ -573,17 +641,25 @@ static int af9035_read_config(struct dvb_usb_device *d) __func__, tmp); } + addr = state->eeprom_addr; + for (i = 0; i < state->dual_mode + 1; i++) { /* tuner */ - ret = af9035_rd_reg(d, EEPROM_1_TUNER_ID + eeprom_shift, &tmp); + ret = af9035_rd_reg(d, addr + EEPROM_1_TUNER_ID, &tmp); if (ret < 0) goto err; - state->af9033_config[i].tuner = tmp; + if (tmp == 0x00) + dev_dbg(&d->udev->dev, + "%s: [%d]tuner not set, using default\n", + __func__, i); + else + state->af9033_config[i].tuner = tmp; + dev_dbg(&d->udev->dev, "%s: [%d]tuner=%02x\n", - __func__, i, tmp); + __func__, i, state->af9033_config[i].tuner); - switch (tmp) { + switch (state->af9033_config[i].tuner) { case AF9033_TUNER_TUA9001: case AF9033_TUNER_FC0011: case AF9033_TUNER_MXL5007T: @@ -592,32 +668,46 @@ static int af9035_read_config(struct dvb_usb_device *d) case AF9033_TUNER_FC0012: state->af9033_config[i].spec_inv = 1; break; + case AF9033_TUNER_IT9135_38: + case AF9033_TUNER_IT9135_51: + case AF9033_TUNER_IT9135_52: + case AF9033_TUNER_IT9135_60: + case AF9033_TUNER_IT9135_61: + case AF9033_TUNER_IT9135_62: + break; default: - dev_warn(&d->udev->dev, "%s: tuner id=%02x not " \ - "supported, please report!", + dev_warn(&d->udev->dev, + "%s: tuner id=%02x not supported, please report!", KBUILD_MODNAME, tmp); } /* disable dual mode if driver does not support it */ if (i == 1) - switch (tmp) { + switch (state->af9033_config[i].tuner) { case AF9033_TUNER_FC0012: + case AF9033_TUNER_IT9135_38: + case AF9033_TUNER_IT9135_51: + case AF9033_TUNER_IT9135_52: + case AF9033_TUNER_IT9135_60: + case AF9033_TUNER_IT9135_61: + case AF9033_TUNER_IT9135_62: + case AF9033_TUNER_MXL5007T: break; default: state->dual_mode = false; - dev_info(&d->udev->dev, "%s: driver does not " \ - "support 2nd tuner and will " \ - "disable it", KBUILD_MODNAME); + dev_info(&d->udev->dev, + "%s: driver does not support 2nd tuner and will disable it", + KBUILD_MODNAME); } /* tuner IF frequency */ - ret = af9035_rd_reg(d, EEPROM_1_IFFREQ_L + eeprom_shift, &tmp); + ret = af9035_rd_reg(d, addr + EEPROM_1_IF_L, &tmp); if (ret < 0) goto err; tmp16 = tmp; - ret = af9035_rd_reg(d, EEPROM_1_IFFREQ_H + eeprom_shift, &tmp); + ret = af9035_rd_reg(d, addr + EEPROM_1_IF_H, &tmp); if (ret < 0) goto err; @@ -625,9 +715,10 @@ static int af9035_read_config(struct dvb_usb_device *d) dev_dbg(&d->udev->dev, "%s: [%d]IF=%d\n", __func__, i, tmp16); - eeprom_shift = 0x10; /* shift for the 2nd tuner params */ + addr += 0x10; /* shift for the 2nd tuner params */ } +skip_eeprom: /* get demod clock */ ret = af9035_rd_reg(d, 0x00d800, &tmp); if (ret < 0) @@ -635,34 +726,12 @@ static int af9035_read_config(struct dvb_usb_device *d) tmp = (tmp >> 0) & 0x0f; - for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) - state->af9033_config[i].clock = clock_lut[tmp]; - - return 0; - -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_read_config_it9135(struct dvb_usb_device *d) -{ - struct state *state = d_to_priv(d); - int ret, i; - u8 tmp; - - state->dual_mode = false; - - /* get demod clock */ - ret = af9035_rd_reg(d, 0x00d800, &tmp); - if (ret < 0) - goto err; - - tmp = (tmp >> 0) & 0x0f; - - for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) - state->af9033_config[i].clock = clock_lut_it9135[tmp]; + for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) { + if (state->chip_type == 0x9135) + state->af9033_config[i].clock = clock_lut_it9135[tmp]; + else + state->af9033_config[i].clock = clock_lut_af9035[tmp]; + } return 0; @@ -821,7 +890,12 @@ static int af9035_frontend_callback(void *adapter_priv, int component, static int af9035_get_adapter_count(struct dvb_usb_device *d) { struct state *state = d_to_priv(d); - return state->dual_mode + 1; + + /* disable 2nd adapter as we don't have PID filters implemented */ + if (d->udev->speed == USB_SPEED_FULL) + return 1; + else + return state->dual_mode + 1; } static int af9035_frontend_attach(struct dvb_usb_adapter *adap) @@ -829,6 +903,7 @@ static int af9035_frontend_attach(struct dvb_usb_adapter *adap) struct state *state = adap_to_priv(adap); struct dvb_usb_device *d = adap_to_d(adap); int ret; + dev_dbg(&d->udev->dev, "%s:\n", __func__); if (!state->af9033_config[adap->id].tuner) { /* unsupported tuner */ @@ -836,20 +911,6 @@ static int af9035_frontend_attach(struct dvb_usb_adapter *adap) goto err; } - if (adap->id == 0) { - state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB; - state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL; - - ret = af9035_wr_reg(d, 0x00417f, - state->af9033_config[1].i2c_addr); - if (ret < 0) - goto err; - - ret = af9035_wr_reg(d, 0x00d81a, state->dual_mode); - if (ret < 0) - goto err; - } - /* attach demodulator */ adap->fe[0] = dvb_attach(af9033_attach, &state->af9033_config[adap->id], &d->i2c_adap); @@ -928,6 +989,8 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap) struct dvb_frontend *fe; struct i2c_msg msg[1]; u8 tuner_addr; + dev_dbg(&d->udev->dev, "%s:\n", __func__); + /* * XXX: Hack used in that function: we abuse unused I2C address bit [7] * to carry info about used I2C bus for dual tuner configuration. @@ -1082,6 +1145,17 @@ static int af9035_tuner_attach(struct dvb_usb_adapter *adap) fe = dvb_attach(fc0012_attach, adap->fe[0], &d->i2c_adap, &af9035_fc0012_config[adap->id]); break; + case AF9033_TUNER_IT9135_38: + case AF9033_TUNER_IT9135_51: + case AF9033_TUNER_IT9135_52: + case AF9033_TUNER_IT9135_60: + case AF9033_TUNER_IT9135_61: + case AF9033_TUNER_IT9135_62: + /* attach tuner */ + fe = dvb_attach(it913x_attach, adap->fe[0], &d->i2c_adap, + state->af9033_config[adap->id].i2c_addr, + state->af9033_config[0].tuner); + break; default: fe = NULL; } @@ -1103,8 +1177,8 @@ static int af9035_init(struct dvb_usb_device *d) { struct state *state = d_to_priv(d); int ret, i; - u16 frame_size = 87 * 188 / 4; - u8 packet_size = 512 / 4; + u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 87) * 188 / 4; + u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4; struct reg_val_mask tab[] = { { 0x80f99d, 0x01, 0x01 }, { 0x80f9a4, 0x01, 0x01 }, @@ -1149,40 +1223,49 @@ err: #if IS_ENABLED(CONFIG_RC_CORE) static int af9035_rc_query(struct dvb_usb_device *d) { - unsigned int key; - unsigned char b[4]; int ret; - struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, b }; + u32 key; + u8 buf[4]; + struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, buf }; ret = af9035_ctrl_msg(d, &req); - if (ret < 0) + if (ret == 1) + return 0; + else if (ret < 0) goto err; - if ((b[2] + b[3]) == 0xff) { - if ((b[0] + b[1]) == 0xff) { - /* NEC */ - key = b[0] << 8 | b[2]; + if ((buf[2] + buf[3]) == 0xff) { + if ((buf[0] + buf[1]) == 0xff) { + /* NEC standard 16bit */ + key = buf[0] << 8 | buf[2]; } else { - /* ext. NEC */ - key = b[0] << 16 | b[1] << 8 | b[2]; + /* NEC extended 24bit */ + key = buf[0] << 16 | buf[1] << 8 | buf[2]; } } else { - key = b[0] << 24 | b[1] << 16 | b[2] << 8 | b[3]; + /* NEC full code 32bit */ + key = buf[0] << 24 | buf[1] << 16 | buf[2] << 8 | buf[3]; } + dev_dbg(&d->udev->dev, "%s: %*ph\n", __func__, 4, buf); + rc_keydown(d->rc_dev, key, 0); -err: - /* ignore errors */ return 0; + +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + + return ret; } static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) { + struct state *state = d_to_priv(d); int ret; u8 tmp; - ret = af9035_rd_reg(d, EEPROM_IR_MODE, &tmp); + ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_IR_MODE, &tmp); if (ret < 0) goto err; @@ -1190,7 +1273,8 @@ static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) /* don't activate rc if in HID mode or if not available */ if (tmp == 5) { - ret = af9035_rd_reg(d, EEPROM_IR_TYPE, &tmp); + ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_IR_TYPE, + &tmp); if (ret < 0) goto err; @@ -1225,6 +1309,109 @@ err: #define af9035_get_rc_config NULL #endif +static int af9035_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, + struct usb_data_stream_properties *stream) +{ + struct dvb_usb_device *d = fe_to_d(fe); + dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, fe_to_adap(fe)->id); + + if (d->udev->speed == USB_SPEED_FULL) + stream->u.bulk.buffersize = 5 * 188; + + return 0; +} + +/* + * FIXME: PID filter is property of demodulator and should be moved to the + * correct driver. Also we support only adapter #0 PID filter and will + * disable adapter #1 if USB1.1 is used. + */ +static int af9035_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct dvb_usb_device *d = adap_to_d(adap); + int ret; + + dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); + + ret = af9035_wr_reg_mask(d, 0x80f993, onoff, 0x01); + if (ret < 0) + goto err; + + return 0; + +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9035_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + struct dvb_usb_device *d = adap_to_d(adap); + int ret; + u8 wbuf[2] = {(pid >> 0) & 0xff, (pid >> 8) & 0xff}; + + dev_dbg(&d->udev->dev, "%s: index=%d pid=%04x onoff=%d\n", + __func__, index, pid, onoff); + + ret = af9035_wr_regs(d, 0x80f996, wbuf, 2); + if (ret < 0) + goto err; + + ret = af9035_wr_reg(d, 0x80f994, onoff); + if (ret < 0) + goto err; + + ret = af9035_wr_reg(d, 0x80f995, index); + if (ret < 0) + goto err; + + return 0; + +err: + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + + return ret; +} + +static int af9035_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + char manufacturer[sizeof("Afatech")]; + + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(udev, udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + /* + * There is two devices having same ID but different chipset. One uses + * AF9015 and the other IT9135 chipset. Only difference seen on lsusb + * is iManufacturer string. + * + * idVendor 0x0ccd TerraTec Electronic GmbH + * idProduct 0x0099 + * bcdDevice 2.00 + * iManufacturer 1 Afatech + * iProduct 2 DVB-T 2 + * + * idVendor 0x0ccd TerraTec Electronic GmbH + * idProduct 0x0099 + * bcdDevice 2.00 + * iManufacturer 1 ITE Technologies, Inc. + * iProduct 2 DVB-T TV Stick + */ + if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) && + (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) { + if (!strcmp("Afatech", manufacturer)) { + dev_dbg(&udev->dev, "%s: rejecting device\n", __func__); + return -ENODEV; + } + } + + return dvb_usbv2_probe(intf, id); +} + /* interface 0 is used by DVB-T receiver and interface 1 is for remote controller (HID) */ static const struct dvb_usb_device_properties af9035_props = { @@ -1237,7 +1424,6 @@ static const struct dvb_usb_device_properties af9035_props = { .generic_bulk_ctrl_endpoint_response = 0x81, .identify_state = af9035_identify_state, - .firmware = AF9035_FIRMWARE_AF9035, .download_firmware = af9035_download_firmware, .i2c_algo = &af9035_i2c_algo, @@ -1246,40 +1432,18 @@ static const struct dvb_usb_device_properties af9035_props = { .tuner_attach = af9035_tuner_attach, .init = af9035_init, .get_rc_config = af9035_get_rc_config, + .get_stream_config = af9035_get_stream_config, .get_adapter_count = af9035_get_adapter_count, .adapter = { { - .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), - }, { - .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), - }, - }, -}; - -static const struct dvb_usb_device_properties it9135_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct state), + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .identify_state = af9035_identify_state, - .firmware = AF9035_FIRMWARE_IT9135, - .download_firmware = af9035_download_firmware_it9135, + .pid_filter_count = 32, + .pid_filter_ctrl = af9035_pid_filter_ctrl, + .pid_filter = af9035_pid_filter, - .i2c_algo = &af9035_i2c_algo, - .read_config = af9035_read_config_it9135, - .frontend_attach = af9035_frontend_attach, - .tuner_attach = af9035_tuner_attach, - .init = af9035_init, - .get_rc_config = af9035_get_rc_config, - - .num_adapters = 1, - .adapter = { - { .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), }, { .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), @@ -1288,6 +1452,7 @@ static const struct dvb_usb_device_properties it9135_props = { }; static const struct usb_device_id af9035_id_table[] = { + /* AF9035 devices */ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035, &af9035_props, "Afatech AF9035 reference design", NULL) }, { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000, @@ -1312,6 +1477,18 @@ static const struct usb_device_id af9035_id_table[] = { &af9035_props, "AVerMedia Twinstar (A825)", NULL) }, { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS, &af9035_props, "Asus U3100Mini Plus", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa, + &af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) }, + /* IT9135 devices */ +#if 0 + { DVB_USB_DEVICE(0x048d, 0x9135, + &af9035_props, "IT9135 reference design", NULL) }, + { DVB_USB_DEVICE(0x048d, 0x9006, + &af9035_props, "IT9135 reference design", NULL) }, +#endif + /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */ + { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099, + &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, af9035_id_table); @@ -1319,7 +1496,7 @@ MODULE_DEVICE_TABLE(usb, af9035_id_table); static struct usb_driver af9035_usb_driver = { .name = KBUILD_MODNAME, .id_table = af9035_id_table, - .probe = dvb_usbv2_probe, + .probe = af9035_probe, .disconnect = dvb_usbv2_disconnect, .suspend = dvb_usbv2_suspend, .resume = dvb_usbv2_resume, @@ -1334,4 +1511,5 @@ MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); MODULE_DESCRIPTION("Afatech AF9035 driver"); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(AF9035_FIRMWARE_AF9035); -MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135); +MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V1); +MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V2); diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h index 29f3eec22c2c..b5827ca3a01e 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.h +++ b/drivers/media/usb/dvb-usb-v2/af9035.h @@ -30,6 +30,7 @@ #include "mxl5007t.h" #include "tda18218.h" #include "fc2580.h" +#include "tuner_it913x.h" struct reg_val { u32 reg; @@ -52,12 +53,18 @@ struct usb_req { }; struct state { +#define BUF_LEN 64 + u8 buf[BUF_LEN]; u8 seq; /* packet sequence number */ - bool dual_mode; + u8 prechip_version; + u8 chip_version; + u16 chip_type; + u8 dual_mode:1; + u16 eeprom_addr; struct af9033_config af9033_config[2]; }; -u32 clock_lut[] = { +static const u32 clock_lut_af9035[] = { 20480000, /* FPGA */ 16384000, /* 16.38 MHz */ 20480000, /* 20.48 MHz */ @@ -72,7 +79,7 @@ u32 clock_lut[] = { 12000000, /* 12.00 MHz */ }; -u32 clock_lut_it9135[] = { +static const u32 clock_lut_it9135[] = { 12000000, /* 12.00 MHz */ 20480000, /* 20.48 MHz */ 36000000, /* 36.00 MHz */ @@ -86,19 +93,31 @@ u32 clock_lut_it9135[] = { }; #define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw" -#define AF9035_FIRMWARE_IT9135 "dvb-usb-it9135-01.fw" +#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw" +#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw" -/* EEPROM locations */ -#define EEPROM_IR_MODE 0x430d -#define EEPROM_DUAL_MODE 0x4326 -#define EEPROM_2ND_DEMOD_ADDR 0x4327 -#define EEPROM_IR_TYPE 0x4329 -#define EEPROM_1_IFFREQ_L 0x432d -#define EEPROM_1_IFFREQ_H 0x432e -#define EEPROM_1_TUNER_ID 0x4331 -#define EEPROM_2_IFFREQ_L 0x433d -#define EEPROM_2_IFFREQ_H 0x433e -#define EEPROM_2_TUNER_ID 0x4341 +/* + * eeprom is memory mapped as read only. Writing that memory mapped address + * will not corrupt eeprom. + * + * eeprom has value 0x00 single mode and 0x03 for dual mode as far as I have + * seen to this day. + */ + +#define EEPROM_BASE_AF9035 0x42fd +#define EEPROM_BASE_IT9135 0x499c +#define EEPROM_SHIFT 0x10 + +#define EEPROM_IR_MODE 0x10 +#define EEPROM_DUAL_MODE 0x29 +#define EEPROM_2ND_DEMOD_ADDR 0x2a +#define EEPROM_IR_TYPE 0x2c +#define EEPROM_1_IF_L 0x30 +#define EEPROM_1_IF_H 0x31 +#define EEPROM_1_TUNER_ID 0x34 +#define EEPROM_2_IF_L 0x40 +#define EEPROM_2_IF_H 0x41 +#define EEPROM_2_TUNER_ID 0x44 /* USB commands */ #define CMD_MEM_RD 0x00 diff --git a/drivers/media/usb/dvb-usb-v2/anysee.c b/drivers/media/usb/dvb-usb-v2/anysee.c index a20d691d0b63..90cfa35ef6e6 100644 --- a/drivers/media/usb/dvb-usb-v2/anysee.c +++ b/drivers/media/usb/dvb-usb-v2/anysee.c @@ -45,25 +45,24 @@ #include "cxd2820r.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static DEFINE_MUTEX(anysee_usb_mutex); -static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, - u8 *rbuf, u8 rlen) +static int anysee_ctrl_msg(struct dvb_usb_device *d, + u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) { struct anysee_state *state = d_to_priv(d); int act_len, ret, i; - u8 buf[64]; - memcpy(&buf[0], sbuf, slen); - buf[60] = state->seq++; + mutex_lock(&d->usb_mutex); - mutex_lock(&anysee_usb_mutex); + memcpy(&state->buf[0], sbuf, slen); + state->buf[60] = state->seq++; - dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, slen, buf); + dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, slen, state->buf); /* We need receive one message more after dvb_usb_generic_rw due to weird transaction flow, which is 1 x send + 2 x receive. */ - ret = dvb_usbv2_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf)); + ret = dvb_usbv2_generic_rw_locked(d, state->buf, sizeof(state->buf), + state->buf, sizeof(state->buf)); if (ret) goto error_unlock; @@ -82,20 +81,19 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, for (i = 0; i < 3; i++) { /* receive 2nd answer */ ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, - d->props->generic_bulk_ctrl_endpoint), buf, sizeof(buf), - &act_len, 2000); - + d->props->generic_bulk_ctrl_endpoint), + state->buf, sizeof(state->buf), &act_len, 2000); if (ret) { - dev_dbg(&d->udev->dev, "%s: recv bulk message " \ - "failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, + "%s: recv bulk message failed=%d\n", + __func__, ret); } else { dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, - rlen, buf); - - if (buf[63] != 0x4f) - dev_dbg(&d->udev->dev, "%s: cmd failed\n", - __func__); + rlen, state->buf); + if (state->buf[63] != 0x4f) + dev_dbg(&d->udev->dev, + "%s: cmd failed\n", __func__); break; } } @@ -109,11 +107,10 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, /* read request, copy returned data to return buf */ if (rbuf && rlen) - memcpy(rbuf, buf, rlen); + memcpy(rbuf, state->buf, rlen); error_unlock: - mutex_unlock(&anysee_usb_mutex); - + mutex_unlock(&d->usb_mutex); return ret; } @@ -638,7 +635,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) { struct anysee_state *state = adap_to_priv(adap); struct dvb_usb_device *d = adap_to_d(adap); - int ret; + int ret = 0; u8 tmp; struct i2c_msg msg[2] = { { @@ -884,9 +881,8 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) if (!adap->fe[0]) { /* we have no frontend :-( */ ret = -ENODEV; - dev_err(&d->udev->dev, "%s: Unsupported Anysee version. " \ - "Please report the " \ - "<linux-media@vger.kernel.org>.\n", + dev_err(&d->udev->dev, + "%s: Unsupported Anysee version. Please report to <linux-media@vger.kernel.org>.\n", KBUILD_MODNAME); } error: diff --git a/drivers/media/usb/dvb-usb-v2/anysee.h b/drivers/media/usb/dvb-usb-v2/anysee.h index c1a4273f14ff..8f426d9fc6e1 100644 --- a/drivers/media/usb/dvb-usb-v2/anysee.h +++ b/drivers/media/usb/dvb-usb-v2/anysee.h @@ -52,8 +52,9 @@ enum cmd { }; struct anysee_state { - u8 hw; /* PCB ID */ + u8 buf[64]; u8 seq; + u8 hw; /* PCB ID */ u8 fe_id:1; /* frondend ID */ u8 has_ci:1; u8 ci_attached:1; diff --git a/drivers/media/usb/dvb-usb-v2/az6007.c b/drivers/media/usb/dvb-usb-v2/az6007.c index 70ec80d8be71..44c64ef361bf 100644 --- a/drivers/media/usb/dvb-usb-v2/az6007.c +++ b/drivers/media/usb/dvb-usb-v2/az6007.c @@ -842,7 +842,7 @@ static int az6007_download_firmware(struct dvb_usb_device *d, { pr_debug("Loading az6007 firmware\n"); - return usbv2_cypress_load_firmware(d->udev, fw, CYPRESS_FX2); + return cypress_load_firmware(d->udev, fw, CYPRESS_FX2); } /* DVB USB Driver stuff */ diff --git a/drivers/media/usb/dvb-usb-v2/cypress_firmware.c b/drivers/media/usb/dvb-usb-v2/cypress_firmware.c deleted file mode 100644 index 211df549f26a..000000000000 --- a/drivers/media/usb/dvb-usb-v2/cypress_firmware.c +++ /dev/null @@ -1,134 +0,0 @@ -/* cypress_firmware.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for downloading the firmware to Cypress FX 1 - * and 2 based devices. - * - */ - -#include "dvb_usb.h" -#include "cypress_firmware.h" - -struct usb_cypress_controller { - u8 id; - const char *name; /* name of the usb controller */ - u16 cs_reg; /* needs to be restarted, - * when the firmware has been downloaded */ -}; - -static const struct usb_cypress_controller cypress[] = { - { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cs_reg = 0x7f92 }, - { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cs_reg = 0x7f92 }, - { .id = CYPRESS_FX2, .name = "Cypress FX2", .cs_reg = 0xe600 }, -}; - -/* - * load a firmware packet to the device - */ -static int usb_cypress_writemem(struct usb_device *udev, u16 addr, u8 *data, - u8 len) -{ - dvb_usb_dbg_usb_control_msg(udev, - 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len); - - return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000); -} - -int usbv2_cypress_load_firmware(struct usb_device *udev, - const struct firmware *fw, int type) -{ - struct hexline *hx; - int ret, pos = 0; - - hx = kmalloc(sizeof(struct hexline), GFP_KERNEL); - if (!hx) { - dev_err(&udev->dev, "%s: kmalloc() failed\n", KBUILD_MODNAME); - return -ENOMEM; - } - - /* stop the CPU */ - hx->data[0] = 1; - ret = usb_cypress_writemem(udev, cypress[type].cs_reg, hx->data, 1); - if (ret != 1) { - dev_err(&udev->dev, "%s: CPU stop failed=%d\n", - KBUILD_MODNAME, ret); - ret = -EIO; - goto err_kfree; - } - - /* write firmware to memory */ - for (;;) { - ret = dvb_usbv2_get_hexline(fw, hx, &pos); - if (ret < 0) - goto err_kfree; - else if (ret == 0) - break; - - ret = usb_cypress_writemem(udev, hx->addr, hx->data, hx->len); - if (ret < 0) { - goto err_kfree; - } else if (ret != hx->len) { - dev_err(&udev->dev, "%s: error while transferring " \ - "firmware (transferred size=%d, " \ - "block size=%d)\n", - KBUILD_MODNAME, ret, hx->len); - ret = -EIO; - goto err_kfree; - } - } - - /* start the CPU */ - hx->data[0] = 0; - ret = usb_cypress_writemem(udev, cypress[type].cs_reg, hx->data, 1); - if (ret != 1) { - dev_err(&udev->dev, "%s: CPU start failed=%d\n", - KBUILD_MODNAME, ret); - ret = -EIO; - goto err_kfree; - } - - ret = 0; -err_kfree: - kfree(hx); - return ret; -} -EXPORT_SYMBOL(usbv2_cypress_load_firmware); - -int dvb_usbv2_get_hexline(const struct firmware *fw, struct hexline *hx, - int *pos) -{ - u8 *b = (u8 *) &fw->data[*pos]; - int data_offs = 4; - - if (*pos >= fw->size) - return 0; - - memset(hx, 0, sizeof(struct hexline)); - hx->len = b[0]; - - if ((*pos + hx->len + 4) >= fw->size) - return -EINVAL; - - hx->addr = b[1] | (b[2] << 8); - hx->type = b[3]; - - if (hx->type == 0x04) { - /* b[4] and b[5] are the Extended linear address record data - * field */ - hx->addr |= (b[4] << 24) | (b[5] << 16); - } - - memcpy(hx->data, &b[data_offs], hx->len); - hx->chk = b[hx->len + data_offs]; - *pos += hx->len + 5; - - return *pos; -} -EXPORT_SYMBOL(dvb_usbv2_get_hexline); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Cypress firmware download"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb-v2/cypress_firmware.h b/drivers/media/usb/dvb-usb-v2/cypress_firmware.h deleted file mode 100644 index 80085fd4132c..000000000000 --- a/drivers/media/usb/dvb-usb-v2/cypress_firmware.h +++ /dev/null @@ -1,31 +0,0 @@ -/* cypress_firmware.h is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for downloading the firmware to Cypress FX 1 - * and 2 based devices. - * - */ - -#ifndef CYPRESS_FIRMWARE_H -#define CYPRESS_FIRMWARE_H - -#define CYPRESS_AN2135 0 -#define CYPRESS_AN2235 1 -#define CYPRESS_FX2 2 - -/* commonly used firmware download types and function */ -struct hexline { - u8 len; - u32 addr; - u8 type; - u8 data[255]; - u8 chk; -}; -extern int usbv2_cypress_load_firmware(struct usb_device *, - const struct firmware *, int); -extern int dvb_usbv2_get_hexline(const struct firmware *, - struct hexline *, int *); - -#endif diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h index 3cac8bd0b116..658c6d47fdff 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h @@ -329,13 +329,16 @@ struct dvb_usb_adapter { u8 feed_count; u8 max_feed_count; s8 active_fe; +#define ADAP_INIT 0 +#define ADAP_SLEEP 1 +#define ADAP_STREAMING 2 + unsigned long state_bits; /* dvb */ struct dvb_adapter dvb_adap; struct dmxdev dmxdev; struct dvb_demux demux; struct dvb_net dvb_net; - struct mutex sync_mutex; struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP]; int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); @@ -400,5 +403,9 @@ extern int dvb_usbv2_reset_resume(struct usb_interface *); /* the generic read/write method for device control */ extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16); extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16); +/* caller must hold lock when locked versions are called */ +extern int dvb_usbv2_generic_rw_locked(struct dvb_usb_device *, + u8 *, u16, u8 *, u16); +extern int dvb_usbv2_generic_write_locked(struct dvb_usb_device *, u8 *, u16); #endif diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c index 086792055912..19f6737d9817 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -28,10 +28,11 @@ MODULE_PARM_DESC(disable_rc_polling, static int dvb_usb_force_pid_filter_usage; module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); -MODULE_PARM_DESC(force_pid_filter_usage, "force all DVB USB devices to use a " \ - "PID filter, if any (default: 0)"); +MODULE_PARM_DESC(force_pid_filter_usage, + "force all DVB USB devices to use a PID filter, if any (default: 0)"); -static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, const char *name) +static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, + const char *name) { int ret; const struct firmware *fw; @@ -44,10 +45,9 @@ static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, const char *nam ret = request_firmware(&fw, name, &d->udev->dev); if (ret < 0) { - dev_err(&d->udev->dev, "%s: Did not find the firmware file "\ - "'%s'. Please see linux/Documentation/dvb/ " \ - "for more details on firmware-problems. " \ - "Status %d\n", KBUILD_MODNAME, name, ret); + dev_err(&d->udev->dev, + "%s: Did not find the firmware file '%s'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status %d\n", + KBUILD_MODNAME, name, ret); goto err; } @@ -181,9 +181,9 @@ static int dvb_usbv2_remote_init(struct dvb_usb_device *d) /* initialize a work queue for handling polling */ INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control); - dev_info(&d->udev->dev, "%s: schedule remote query interval " \ - "to %d msecs\n", KBUILD_MODNAME, - d->rc.interval); + dev_info(&d->udev->dev, + "%s: schedule remote query interval to %d msecs\n", + KBUILD_MODNAME, d->rc.interval); schedule_delayed_work(&d->rc_query_work, msecs_to_jiffies(d->rc.interval)); d->rc_polling_active = true; @@ -253,128 +253,159 @@ static int dvb_usbv2_adapter_stream_exit(struct dvb_usb_adapter *adap) return usb_urb_exitv2(&adap->stream); } -static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, - int count) +static int wait_schedule(void *ptr) +{ + schedule(); + + return 0; +} + +static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) { struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; struct dvb_usb_device *d = adap_to_d(adap); - int ret; - dev_dbg(&d->udev->dev, "%s: adap=%d active_fe=%d feed_type=%d " \ - "setting pid [%s]: %04x (%04d) at index %d '%s'\n", + int ret = 0; + struct usb_data_stream_properties stream_props; + dev_dbg(&d->udev->dev, + "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n", __func__, adap->id, adap->active_fe, dvbdmxfeed->type, adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid, - dvbdmxfeed->pid, dvbdmxfeed->index, - (count == 1) ? "on" : "off"); + dvbdmxfeed->pid, dvbdmxfeed->index); + + /* wait init is done */ + wait_on_bit(&adap->state_bits, ADAP_INIT, wait_schedule, + TASK_UNINTERRUPTIBLE); if (adap->active_fe == -1) return -EINVAL; - adap->feed_count += count; - - /* stop feeding if it is last pid */ - if (adap->feed_count == 0) { - dev_dbg(&d->udev->dev, "%s: stop feeding\n", __func__); - - if (d->props->streaming_ctrl) { - ret = d->props->streaming_ctrl( - adap->fe[adap->active_fe], 0); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: streaming_ctrl() " \ - "failed=%d\n", KBUILD_MODNAME, - ret); - usb_urb_killv2(&adap->stream); - goto err_mutex_unlock; - } - } - usb_urb_killv2(&adap->stream); - mutex_unlock(&adap->sync_mutex); - } + /* skip feed setup if we are already feeding */ + if (adap->feed_count++ > 0) + goto skip_feed_start; - /* activate the pid on the device pid filter */ - if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->pid_filtering && adap->props->pid_filter) { - ret = adap->props->pid_filter(adap, dvbdmxfeed->index, - dvbdmxfeed->pid, (count == 1) ? 1 : 0); - if (ret < 0) - dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n", + /* set 'streaming' status bit */ + set_bit(ADAP_STREAMING, &adap->state_bits); + + /* resolve input and output streaming parameters */ + if (d->props->get_stream_config) { + memcpy(&stream_props, &adap->props->stream, + sizeof(struct usb_data_stream_properties)); + ret = d->props->get_stream_config(adap->fe[adap->active_fe], + &adap->ts_type, &stream_props); + if (ret) + dev_err(&d->udev->dev, + "%s: get_stream_config() failed=%d\n", KBUILD_MODNAME, ret); + } else { + stream_props = adap->props->stream; } - /* start feeding if it is first pid */ - if (adap->feed_count == 1 && count == 1) { - struct usb_data_stream_properties stream_props; - mutex_lock(&adap->sync_mutex); - dev_dbg(&d->udev->dev, "%s: start feeding\n", __func__); + switch (adap->ts_type) { + case DVB_USB_FE_TS_TYPE_204: + adap->stream.complete = dvb_usb_data_complete_204; + break; + case DVB_USB_FE_TS_TYPE_RAW: + adap->stream.complete = dvb_usb_data_complete_raw; + break; + case DVB_USB_FE_TS_TYPE_188: + default: + adap->stream.complete = dvb_usb_data_complete; + break; + } - /* resolve input and output streaming paramters */ - if (d->props->get_stream_config) { - memcpy(&stream_props, &adap->props->stream, - sizeof(struct usb_data_stream_properties)); - ret = d->props->get_stream_config( - adap->fe[adap->active_fe], - &adap->ts_type, &stream_props); - if (ret < 0) - goto err_mutex_unlock; - } else { - stream_props = adap->props->stream; - } + /* submit USB streaming packets */ + usb_urb_submitv2(&adap->stream, &stream_props); - switch (adap->ts_type) { - case DVB_USB_FE_TS_TYPE_204: - adap->stream.complete = dvb_usb_data_complete_204; - break; - case DVB_USB_FE_TS_TYPE_RAW: - adap->stream.complete = dvb_usb_data_complete_raw; - break; - case DVB_USB_FE_TS_TYPE_188: - default: - adap->stream.complete = dvb_usb_data_complete; - break; - } + /* enable HW PID filter */ + if (adap->pid_filtering && adap->props->pid_filter_ctrl) { + ret = adap->props->pid_filter_ctrl(adap, 1); + if (ret) + dev_err(&d->udev->dev, + "%s: pid_filter_ctrl() failed=%d\n", + KBUILD_MODNAME, ret); + } - usb_urb_submitv2(&adap->stream, &stream_props); - - if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->props->caps & - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF && - adap->props->pid_filter_ctrl) { - ret = adap->props->pid_filter_ctrl(adap, - adap->pid_filtering); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: " \ - "pid_filter_ctrl() failed=%d\n", - KBUILD_MODNAME, ret); - goto err_mutex_unlock; - } - } + /* ask device to start streaming */ + if (d->props->streaming_ctrl) { + ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 1); + if (ret) + dev_err(&d->udev->dev, + "%s: streaming_ctrl() failed=%d\n", + KBUILD_MODNAME, ret); + } +skip_feed_start: - if (d->props->streaming_ctrl) { - ret = d->props->streaming_ctrl( - adap->fe[adap->active_fe], 1); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: streaming_ctrl() " \ - "failed=%d\n", KBUILD_MODNAME, - ret); - goto err_mutex_unlock; - } - } + /* add PID to device HW PID filter */ + if (adap->pid_filtering && adap->props->pid_filter) { + ret = adap->props->pid_filter(adap, dvbdmxfeed->index, + dvbdmxfeed->pid, 1); + if (ret) + dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n", + KBUILD_MODNAME, ret); } - return 0; -err_mutex_unlock: - mutex_unlock(&adap->sync_mutex); - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + if (ret) + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } -static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - return dvb_usb_ctrl_feed(dvbdmxfeed, 1); -} - static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) { - return dvb_usb_ctrl_feed(dvbdmxfeed, -1); + struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; + struct dvb_usb_device *d = adap_to_d(adap); + int ret = 0; + dev_dbg(&d->udev->dev, + "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n", + __func__, adap->id, adap->active_fe, dvbdmxfeed->type, + adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid, + dvbdmxfeed->pid, dvbdmxfeed->index); + + if (adap->active_fe == -1) + return -EINVAL; + + /* remove PID from device HW PID filter */ + if (adap->pid_filtering && adap->props->pid_filter) { + ret = adap->props->pid_filter(adap, dvbdmxfeed->index, + dvbdmxfeed->pid, 0); + if (ret) + dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n", + KBUILD_MODNAME, ret); + } + + /* we cannot stop streaming until last PID is removed */ + if (--adap->feed_count > 0) + goto skip_feed_stop; + + /* ask device to stop streaming */ + if (d->props->streaming_ctrl) { + ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 0); + if (ret) + dev_err(&d->udev->dev, + "%s: streaming_ctrl() failed=%d\n", + KBUILD_MODNAME, ret); + } + + /* disable HW PID filter */ + if (adap->pid_filtering && adap->props->pid_filter_ctrl) { + ret = adap->props->pid_filter_ctrl(adap, 0); + if (ret) + dev_err(&d->udev->dev, + "%s: pid_filter_ctrl() failed=%d\n", + KBUILD_MODNAME, ret); + } + + /* kill USB streaming packets */ + usb_urb_killv2(&adap->stream); + + /* clear 'streaming' status bit */ + clear_bit(ADAP_STREAMING, &adap->state_bits); + smp_mb__after_clear_bit(); + wake_up_bit(&adap->state_bits, ADAP_STREAMING); +skip_feed_stop: + + if (ret) + dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + return ret; } static int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap) @@ -435,8 +466,6 @@ static int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap) goto err_dvb_net_init; } - mutex_init(&adap->sync_mutex); - return 0; err_dvb_net_init: dvb_dmxdev_release(&adap->dmxdev); @@ -500,7 +529,7 @@ static int dvb_usb_fe_init(struct dvb_frontend *fe) if (!adap->suspend_resume_active) { adap->active_fe = fe->id; - mutex_lock(&adap->sync_mutex); + set_bit(ADAP_INIT, &adap->state_bits); } ret = dvb_usbv2_device_power_ctrl(d, 1); @@ -519,8 +548,11 @@ static int dvb_usb_fe_init(struct dvb_frontend *fe) goto err; } err: - if (!adap->suspend_resume_active) - mutex_unlock(&adap->sync_mutex); + if (!adap->suspend_resume_active) { + clear_bit(ADAP_INIT, &adap->state_bits); + smp_mb__after_clear_bit(); + wake_up_bit(&adap->state_bits, ADAP_INIT); + } dev_dbg(&d->udev->dev, "%s: ret=%d\n", __func__, ret); return ret; @@ -534,8 +566,11 @@ static int dvb_usb_fe_sleep(struct dvb_frontend *fe) dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id, fe->id); - if (!adap->suspend_resume_active) - mutex_lock(&adap->sync_mutex); + if (!adap->suspend_resume_active) { + set_bit(ADAP_SLEEP, &adap->state_bits); + wait_on_bit(&adap->state_bits, ADAP_STREAMING, wait_schedule, + TASK_UNINTERRUPTIBLE); + } if (adap->fe_sleep[fe->id]) { ret = adap->fe_sleep[fe->id](fe); @@ -555,7 +590,9 @@ static int dvb_usb_fe_sleep(struct dvb_frontend *fe) err: if (!adap->suspend_resume_active) { adap->active_fe = -1; - mutex_unlock(&adap->sync_mutex); + clear_bit(ADAP_SLEEP, &adap->state_bits); + smp_mb__after_clear_bit(); + wake_up_bit(&adap->state_bits, ADAP_SLEEP); } dev_dbg(&d->udev->dev, "%s: ret=%d\n", __func__, ret); @@ -574,8 +611,9 @@ static int dvb_usbv2_adapter_frontend_init(struct dvb_usb_adapter *adap) if (d->props->frontend_attach) { ret = d->props->frontend_attach(adap); if (ret < 0) { - dev_dbg(&d->udev->dev, "%s: frontend_attach() " \ - "failed=%d\n", __func__, ret); + dev_dbg(&d->udev->dev, + "%s: frontend_attach() failed=%d\n", + __func__, ret); goto err_dvb_frontend_detach; } } else { @@ -595,8 +633,9 @@ static int dvb_usbv2_adapter_frontend_init(struct dvb_usb_adapter *adap) ret = dvb_register_frontend(&adap->dvb_adap, adap->fe[i]); if (ret < 0) { - dev_err(&d->udev->dev, "%s: frontend%d registration " \ - "failed\n", KBUILD_MODNAME, i); + dev_err(&d->udev->dev, + "%s: frontend%d registration failed\n", + KBUILD_MODNAME, i); goto err_dvb_unregister_frontend; } @@ -670,33 +709,33 @@ static int dvb_usbv2_adapter_init(struct dvb_usb_device *d) /* speed - when running at FULL speed we need a HW PID filter */ if (d->udev->speed == USB_SPEED_FULL && !(adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) { - dev_err(&d->udev->dev, "%s: this USB2.0 device " \ - "cannot be run on a USB1.1 port (it " \ - "lacks a hardware PID filter)\n", + dev_err(&d->udev->dev, + "%s: this USB2.0 device cannot be run on a USB1.1 port (it lacks a hardware PID filter)\n", KBUILD_MODNAME); ret = -ENODEV; goto err; } else if ((d->udev->speed == USB_SPEED_FULL && adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) || (adap->props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { - dev_info(&d->udev->dev, "%s: will use the device's " \ - "hardware PID filter " \ - "(table count: %d)\n", KBUILD_MODNAME, + dev_info(&d->udev->dev, + "%s: will use the device's hardware PID filter (table count: %d)\n", + KBUILD_MODNAME, adap->props->pid_filter_count); adap->pid_filtering = 1; adap->max_feed_count = adap->props->pid_filter_count; } else { - dev_info(&d->udev->dev, "%s: will pass the complete " \ - "MPEG2 transport stream to the " \ - "software demuxer\n", KBUILD_MODNAME); + dev_info(&d->udev->dev, + "%s: will pass the complete MPEG2 transport stream to the software demuxer\n", + KBUILD_MODNAME); adap->pid_filtering = 0; adap->max_feed_count = 255; } if (!adap->pid_filtering && dvb_usb_force_pid_filter_usage && adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) { - dev_info(&d->udev->dev, "%s: PID filter enabled by " \ - "module option\n", KBUILD_MODNAME); + dev_info(&d->udev->dev, + "%s: PID filter enabled by module option\n", + KBUILD_MODNAME); adap->pid_filtering = 1; adap->max_feed_count = adap->props->pid_filter_count; } @@ -825,8 +864,9 @@ static void dvb_usbv2_init_work(struct work_struct *work) if (ret == 0) { ; } else if (ret == COLD) { - dev_info(&d->udev->dev, "%s: found a '%s' in cold " \ - "state\n", KBUILD_MODNAME, d->name); + dev_info(&d->udev->dev, + "%s: found a '%s' in cold state\n", + KBUILD_MODNAME, d->name); if (!name) name = d->props->firmware; @@ -868,8 +908,9 @@ static void dvb_usbv2_init_work(struct work_struct *work) if (ret < 0) goto err_usb_driver_release_interface; - dev_info(&d->udev->dev, "%s: '%s' successfully initialized and " \ - "connected\n", KBUILD_MODNAME, d->name); + dev_info(&d->udev->dev, + "%s: '%s' successfully initialized and connected\n", + KBUILD_MODNAME, d->name); return; err_usb_driver_release_interface: diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c index 5716662b4834..33ff97e708e3 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c @@ -21,8 +21,8 @@ #include "dvb_usb_common.h" -int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, - u16 rlen) +static int dvb_usb_v2_generic_io(struct dvb_usb_device *d, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { int ret, actual_length; @@ -32,8 +32,6 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, return -EINVAL; } - mutex_lock(&d->usb_mutex); - dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf); ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, @@ -56,20 +54,51 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, d->props->generic_bulk_ctrl_endpoint_response), rbuf, rlen, &actual_length, 2000); if (ret) - dev_err(&d->udev->dev, "%s: 2nd usb_bulk_msg() " \ - "failed=%d\n", KBUILD_MODNAME, ret); + dev_err(&d->udev->dev, + "%s: 2nd usb_bulk_msg() failed=%d\n", + KBUILD_MODNAME, ret); dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, actual_length, rbuf); } + return ret; +} + +int dvb_usbv2_generic_rw(struct dvb_usb_device *d, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + int ret; + + mutex_lock(&d->usb_mutex); + ret = dvb_usb_v2_generic_io(d, wbuf, wlen, rbuf, rlen); mutex_unlock(&d->usb_mutex); + return ret; } EXPORT_SYMBOL(dvb_usbv2_generic_rw); int dvb_usbv2_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len) { - return dvb_usbv2_generic_rw(d, buf, len, NULL, 0); + int ret; + + mutex_lock(&d->usb_mutex); + ret = dvb_usb_v2_generic_io(d, buf, len, NULL, 0); + mutex_unlock(&d->usb_mutex); + + return ret; } EXPORT_SYMBOL(dvb_usbv2_generic_write); + +int dvb_usbv2_generic_rw_locked(struct dvb_usb_device *d, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + return dvb_usb_v2_generic_io(d, wbuf, wlen, rbuf, rlen); +} +EXPORT_SYMBOL(dvb_usbv2_generic_rw_locked); + +int dvb_usbv2_generic_write_locked(struct dvb_usb_device *d, u8 *buf, u16 len) +{ + return dvb_usb_v2_generic_io(d, buf, len, NULL, 0); +} +EXPORT_SYMBOL(dvb_usbv2_generic_write_locked); diff --git a/drivers/media/usb/dvb-usb-v2/it913x.c b/drivers/media/usb/dvb-usb-v2/it913x.c index 833847995c65..e48cdeb9df41 100644 --- a/drivers/media/usb/dvb-usb-v2/it913x.c +++ b/drivers/media/usb/dvb-usb-v2/it913x.c @@ -218,6 +218,7 @@ static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) deb_info(1, "PID_C (%02x)", onoff); + st->pid_filter_onoff = adap->pid_filtering; ret = it913x_wr_reg(d, pro, PID_EN, st->pid_filter_onoff); mutex_unlock(&d->i2c_mutex); diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c index f30c58cecbba..b3fd0ffa3c3f 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -1241,10 +1241,13 @@ static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, struct usb_data_stream_properties *stream) { struct dvb_usb_adapter *adap = fe_to_adap(fe); - struct dvb_usb_device *d = adap_to_d(adap); + struct dvb_usb_device *d; if (adap == NULL) return 0; + + d = adap_to_d(adap); + /* Turn PID filter on the fly by module option */ if (pid_filter == 2) { adap->pid_filtering = 1; @@ -1299,8 +1302,7 @@ static void lme2510_exit(struct dvb_usb_device *d) if (d != NULL) { usb_buffer = lme2510_exit_int(d); - if (usb_buffer != NULL) - kfree(usb_buffer); + kfree(usb_buffer); } } diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h index 432706ae5274..3f3f8bfd190b 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h @@ -21,6 +21,7 @@ #ifndef __MXL111SF_DEMOD_H__ #define __MXL111SF_DEMOD_H__ +#include <linux/kconfig.h> #include "dvb_frontend.h" #include "mxl111sf.h" @@ -31,8 +32,7 @@ struct mxl111sf_demod_config { struct mxl111sf_reg_ctrl_info *ctrl_reg_info); }; -#if defined(CONFIG_DVB_USB_MXL111SF) || \ - (defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_USB_MXL111SF) extern struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state, struct mxl111sf_demod_config *cfg); diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h index ff333960b184..90f583e5d6a6 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h @@ -21,8 +21,8 @@ #ifndef __MXL111SF_TUNER_H__ #define __MXL111SF_TUNER_H__ +#include <linux/kconfig.h> #include "dvb_frontend.h" - #include "mxl111sf.h" enum mxl_if_freq { @@ -60,8 +60,7 @@ struct mxl111sf_tuner_config { /* ------------------------------------------------------------------------ */ -#if defined(CONFIG_DVB_USB_MXL111SF) || \ - (defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_DVB_USB_MXL111SF) extern struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe, struct mxl111sf_state *mxl_state, diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index d98387a3c95e..22015fe1a0f3 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -33,6 +33,7 @@ #include "e4000.h" #include "fc2580.h" #include "tua9001.h" +#include "r820t.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -375,6 +376,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf}; + struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 5, buf}; dev_dbg(&d->udev->dev, "%s:\n", __func__); @@ -479,6 +481,14 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) goto found; } + /* check R820T by reading tuner stats at I2C addr 0x1a */ + ret = rtl28xxu_ctrl_msg(d, &req_r820t); + if (ret == 0) { + priv->tuner = TUNER_RTL2832_R820T; + priv->tuner_name = "R820T"; + goto found; + } + found: dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name); @@ -589,6 +599,12 @@ static struct rtl2832_config rtl28xxu_rtl2832_e4000_config = { .tuner = TUNER_RTL2832_E4000, }; +static struct rtl2832_config rtl28xxu_rtl2832_r820t_config = { + .i2c_addr = 0x10, + .xtal = 28800000, + .tuner = TUNER_RTL2832_R820T, +}; + static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) { @@ -728,6 +744,9 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) case TUNER_RTL2832_E4000: rtl2832_config = &rtl28xxu_rtl2832_e4000_config; break; + case TUNER_RTL2832_R820T: + rtl2832_config = &rtl28xxu_rtl2832_r820t_config; + break; default: dev_err(&d->udev->dev, "%s: unknown tuner=%s\n", KBUILD_MODNAME, priv->tuner_name); @@ -840,6 +859,13 @@ static const struct fc0012_config rtl2832u_fc0012_config = { .xtal_freq = FC_XTAL_28_8_MHZ, }; +static const struct r820t_config rtl2832u_r820t_config = { + .i2c_addr = 0x1a, + .xtal = 28800000, + .max_i2c_msg_len = 2, + .rafael_chip = CHIP_R820T, +}; + static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; @@ -889,6 +915,14 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) fe = dvb_attach(tua9001_attach, adap->fe[0], &d->i2c_adap, &rtl2832u_tua9001_config); break; + case TUNER_RTL2832_R820T: + fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap, + &rtl2832u_r820t_config); + + /* Use tuner to get the signal strength */ + adap->fe[0]->ops.read_signal_strength = + adap->fe[0]->ops.tuner_ops.get_rf_strength; + break; default: fe = NULL; dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, @@ -1372,6 +1406,8 @@ static const struct usb_device_id rtl28xxu_id_table[] = { &rtl2832u_props, "Digivox Micro Hd", NULL) }, { DVB_USB_DEVICE(USB_VID_COMPRO, 0x0620, &rtl2832u_props, "Compro VideoMate U620F", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394, + &rtl2832u_props, "MaxMedia HU394-T", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h index 2f3af2d3b6ce..533a33127289 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h @@ -82,6 +82,7 @@ enum rtl28xxu_tuner { TUNER_RTL2832_E4000, TUNER_RTL2832_TDA18272, TUNER_RTL2832_FC0013, + TUNER_RTL2832_R820T, }; struct rtl28xxu_req { diff --git a/drivers/media/usb/dvb-usb-v2/usb_urb.c b/drivers/media/usb/dvb-usb-v2/usb_urb.c index 7346f85f3f2f..ca8f3c2b1082 100644 --- a/drivers/media/usb/dvb-usb-v2/usb_urb.c +++ b/drivers/media/usb/dvb-usb-v2/usb_urb.c @@ -22,8 +22,8 @@ static void usb_urb_complete(struct urb *urb) int i; u8 *b; - dev_dbg_ratelimited(&stream->udev->dev, "%s: %s urb completed " \ - "status=%d length=%d/%d pack_num=%d errors=%d\n", + dev_dbg_ratelimited(&stream->udev->dev, + "%s: %s urb completed status=%d length=%d/%d pack_num=%d errors=%d\n", __func__, ptype == PIPE_ISOCHRONOUS ? "isoc" : "bulk", urb->status, urb->actual_length, urb->transfer_buffer_length, @@ -49,8 +49,8 @@ static void usb_urb_complete(struct urb *urb) case PIPE_ISOCHRONOUS: for (i = 0; i < urb->number_of_packets; i++) { if (urb->iso_frame_desc[i].status != 0) - dev_dbg(&stream->udev->dev, "%s: iso frame " \ - "descriptor has an error=%d\n", + dev_dbg(&stream->udev->dev, + "%s: iso frame descriptor has an error=%d\n", __func__, urb->iso_frame_desc[i].status); else if (urb->iso_frame_desc[i].actual_length > 0) @@ -67,8 +67,9 @@ static void usb_urb_complete(struct urb *urb) stream->complete(stream, b, urb->actual_length); break; default: - dev_err(&stream->udev->dev, "%s: unknown endpoint type in " \ - "completition handler\n", KBUILD_MODNAME); + dev_err(&stream->udev->dev, + "%s: unknown endpoint type in completition handler\n", + KBUILD_MODNAME); return; } usb_submit_urb(urb, GFP_ATOMIC); @@ -101,8 +102,8 @@ int usb_urb_submitv2(struct usb_data_stream *stream, dev_dbg(&stream->udev->dev, "%s: submit urb=%d\n", __func__, i); ret = usb_submit_urb(stream->urb_list[i], GFP_ATOMIC); if (ret) { - dev_err(&stream->udev->dev, "%s: could not submit " \ - "urb no. %d - get them all back\n", + dev_err(&stream->udev->dev, + "%s: could not submit urb no. %d - get them all back\n", KBUILD_MODNAME, i); usb_urb_killv2(stream); return ret; @@ -229,8 +230,9 @@ static int usb_alloc_stream_buffers(struct usb_data_stream *stream, int num, stream->buf_num = 0; stream->buf_size = size; - dev_dbg(&stream->udev->dev, "%s: all in all I will use %lu bytes for " \ - "streaming\n", __func__, num * size); + dev_dbg(&stream->udev->dev, + "%s: all in all I will use %lu bytes for streaming\n", + __func__, num * size); for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) { stream->buf_list[stream->buf_num] = usb_alloc_coherent( @@ -274,8 +276,8 @@ int usb_urb_reconfig(struct usb_data_stream *stream, } if (stream->buf_num < props->count || stream->buf_size < buf_size) { - dev_err(&stream->udev->dev, "%s: cannot reconfigure as " \ - "allocated buffers are too small\n", + dev_err(&stream->udev->dev, + "%s: cannot reconfigure as allocated buffers are too small\n", KBUILD_MODNAME); return -EINVAL; } @@ -321,8 +323,9 @@ int usb_urb_initv2(struct usb_data_stream *stream, memcpy(&stream->props, props, sizeof(*props)); if (!stream->complete) { - dev_err(&stream->udev->dev, "%s: there is no data callback - " \ - "this doesn't make sense\n", KBUILD_MODNAME); + dev_err(&stream->udev->dev, + "%s: there is no data callback - this doesn't make sense\n", + KBUILD_MODNAME); return -EINVAL; } @@ -343,8 +346,9 @@ int usb_urb_initv2(struct usb_data_stream *stream, return usb_urb_alloc_isoc_urbs(stream); default: - dev_err(&stream->udev->dev, "%s: unknown urb-type for data " \ - "transfer\n", KBUILD_MODNAME); + dev_err(&stream->udev->dev, + "%s: unknown urb-type for data transfer\n", + KBUILD_MODNAME); return -EINVAL; } } |