summaryrefslogtreecommitdiff
path: root/drivers/mfd/wm8994-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/wm8994-core.c')
-rw-r--r--drivers/mfd/wm8994-core.c158
1 files changed, 88 insertions, 70 deletions
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 61894fced8ea..f117e7fb9321 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -28,11 +28,7 @@
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/wm8994/registers.h>
-static int wm8994_read(struct wm8994 *wm8994, unsigned short reg,
- int bytes, void *dest)
-{
- return regmap_raw_read(wm8994->regmap, reg, dest, bytes);
-}
+#include "wm8994.h"
/**
* wm8994_reg_read: Read a single WM8994 register.
@@ -68,12 +64,6 @@ int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
return regmap_bulk_read(wm8994->regmap, reg, buf, count);
}
-static int wm8994_write(struct wm8994 *wm8994, unsigned short reg,
- int bytes, const void *src)
-{
- return regmap_raw_write(wm8994->regmap, reg, src, bytes);
-}
-
/**
* wm8994_reg_write: Write a single WM8994 register.
*
@@ -252,6 +242,20 @@ static int wm8994_suspend(struct device *dev)
break;
}
+ switch (wm8994->type) {
+ case WM1811:
+ ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read jackdet: %d\n", ret);
+ } else if (ret & WM1811_JACKDET_MODE_MASK) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+
/* Disable LDO pulldowns while the device is suspended if we
* don't know that something will be driving them. */
if (!wm8994->ldo_ena_always_driven)
@@ -259,25 +263,14 @@ static int wm8994_suspend(struct device *dev)
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
- /* GPIO configuration state is saved here since we may be configuring
- * the GPIO alternate functions even if we're not using the gpiolib
- * driver for them.
- */
- ret = wm8994_read(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2,
- &wm8994->gpio_regs);
- if (ret < 0)
- dev_err(dev, "Failed to save GPIO registers: %d\n", ret);
-
- /* For similar reasons we also stash the regulator states */
- ret = wm8994_read(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
- &wm8994->ldo_regs);
- if (ret < 0)
- dev_err(dev, "Failed to save LDO registers: %d\n", ret);
-
/* Explicitly put the device into reset in case regulators
* don't get disabled in order to ensure consistent restart.
*/
- wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, 0x8994);
+ wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
+ wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
+
+ regcache_cache_only(wm8994->regmap, true);
+ regcache_mark_dirty(wm8994->regmap);
wm8994->suspended = true;
@@ -294,7 +287,7 @@ static int wm8994_suspend(struct device *dev)
static int wm8994_resume(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
- int ret, i;
+ int ret;
/* We may have lied to the PM core about suspending */
if (!wm8994->suspended)
@@ -307,27 +300,13 @@ static int wm8994_resume(struct device *dev)
return ret;
}
- /* Write register at a time as we use the cache on the CPU so store
- * it in native endian.
- */
- for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
- ret = wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK
- + i, wm8994->irq_masks_cur[i]);
- if (ret < 0)
- dev_err(dev, "Failed to restore interrupt masks: %d\n",
- ret);
+ regcache_cache_only(wm8994->regmap, false);
+ ret = regcache_sync(wm8994->regmap);
+ if (ret != 0) {
+ dev_err(dev, "Failed to restore register map: %d\n", ret);
+ goto err_enable;
}
- ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
- &wm8994->ldo_regs);
- if (ret < 0)
- dev_err(dev, "Failed to restore LDO registers: %d\n", ret);
-
- ret = wm8994_write(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2,
- &wm8994->gpio_regs);
- if (ret < 0)
- dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
-
/* Disable LDO pulldowns while the device is active */
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
@@ -336,6 +315,11 @@ static int wm8994_resume(struct device *dev)
wm8994->suspended = false;
return 0;
+
+err_enable:
+ regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
+
+ return ret;
}
#endif
@@ -361,19 +345,16 @@ static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
}
#endif
-static struct regmap_config wm8994_regmap_config = {
- .reg_bits = 16,
- .val_bits = 16,
-};
-
/*
* Instantiate the generic non-control parts of the device.
*/
static int wm8994_device_init(struct wm8994 *wm8994, int irq)
{
struct wm8994_pdata *pdata = wm8994->dev->platform_data;
+ struct regmap_config *regmap_config;
const char *devname;
int ret, i;
+ int pulls = 0;
dev_set_drvdata(wm8994->dev, wm8994);
@@ -402,9 +383,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
goto err_regmap;
}
- wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) *
- wm8994->num_supplies,
- GFP_KERNEL);
+ wm8994->supplies = devm_kzalloc(wm8994->dev,
+ sizeof(struct regulator_bulk_data) *
+ wm8994->num_supplies, GFP_KERNEL);
if (!wm8994->supplies) {
ret = -ENOMEM;
goto err_regmap;
@@ -432,7 +413,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
wm8994->supplies);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
- goto err_supplies;
+ goto err_regmap;
}
ret = regulator_bulk_enable(wm8994->num_supplies,
@@ -482,25 +463,54 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
ret);
goto err_enable;
}
+ wm8994->revision = ret;
switch (wm8994->type) {
case WM8994:
- switch (ret) {
+ switch (wm8994->revision) {
case 0:
case 1:
dev_warn(wm8994->dev,
"revision %c not fully supported\n",
- 'A' + ret);
+ 'A' + wm8994->revision);
break;
default:
break;
}
break;
+ case WM1811:
+ /* Revision C did not change the relevant layer */
+ if (wm8994->revision > 1)
+ wm8994->revision++;
+ break;
default:
break;
}
- dev_info(wm8994->dev, "%s revision %c\n", devname, 'A' + ret);
+ dev_info(wm8994->dev, "%s revision %c\n", devname,
+ 'A' + wm8994->revision);
+
+ switch (wm8994->type) {
+ case WM1811:
+ regmap_config = &wm1811_regmap_config;
+ break;
+ case WM8994:
+ regmap_config = &wm8994_regmap_config;
+ break;
+ case WM8958:
+ regmap_config = &wm8958_regmap_config;
+ break;
+ default:
+ dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
+ return -EINVAL;
+ }
+
+ ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
+ if (ret != 0) {
+ dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
+ ret);
+ return ret;
+ }
if (pdata) {
wm8994->irq_base = pdata->irq_base;
@@ -516,12 +526,16 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
}
wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
+
+ if (pdata->spkmode_pu)
+ pulls |= WM8994_SPKMODE_PU;
}
- /* Disable LDO pulldowns while the device is active */
+ /* Disable unneeded pulls */
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
- WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
- 0);
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
+ WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
+ pulls);
/* In some system designs where the regulators are not in use,
* we can achieve a small reduction in leakage currents by
@@ -560,12 +574,9 @@ err_enable:
wm8994->supplies);
err_get:
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
-err_supplies:
- kfree(wm8994->supplies);
err_regmap:
regmap_exit(wm8994->regmap);
mfd_remove_devices(wm8994->dev);
- kfree(wm8994);
return ret;
}
@@ -577,18 +588,24 @@ static void wm8994_device_exit(struct wm8994 *wm8994)
regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
- kfree(wm8994->supplies);
regmap_exit(wm8994->regmap);
- kfree(wm8994);
}
+static const struct of_device_id wm8994_of_match[] = {
+ { .compatible = "wlf,wm1811", },
+ { .compatible = "wlf,wm8994", },
+ { .compatible = "wlf,wm8958", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8994_of_match);
+
static int wm8994_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8994 *wm8994;
int ret;
- wm8994 = kzalloc(sizeof(struct wm8994), GFP_KERNEL);
+ wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
if (wm8994 == NULL)
return -ENOMEM;
@@ -597,12 +614,11 @@ static int wm8994_i2c_probe(struct i2c_client *i2c,
wm8994->irq = i2c->irq;
wm8994->type = id->driver_data;
- wm8994->regmap = regmap_init_i2c(i2c, &wm8994_regmap_config);
+ wm8994->regmap = regmap_init_i2c(i2c, &wm8994_base_regmap_config);
if (IS_ERR(wm8994->regmap)) {
ret = PTR_ERR(wm8994->regmap);
dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
ret);
- kfree(wm8994);
return ret;
}
@@ -620,6 +636,7 @@ static int wm8994_i2c_remove(struct i2c_client *i2c)
static const struct i2c_device_id wm8994_i2c_id[] = {
{ "wm1811", WM1811 },
+ { "wm1811a", WM1811 },
{ "wm8994", WM8994 },
{ "wm8958", WM8958 },
{ }
@@ -634,6 +651,7 @@ static struct i2c_driver wm8994_i2c_driver = {
.name = "wm8994",
.owner = THIS_MODULE,
.pm = &wm8994_pm_ops,
+ .of_match_table = wm8994_of_match,
},
.probe = wm8994_i2c_probe,
.remove = wm8994_i2c_remove,