summaryrefslogtreecommitdiff
path: root/drivers/misc/cxl/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/cxl/pci.c')
-rw-r--r--drivers/misc/cxl/pci.c484
1 files changed, 441 insertions, 43 deletions
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index a08fcc888a71..d152e2de8c93 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -55,6 +55,8 @@
pci_read_config_byte(dev, vsec + 0xa, dest)
#define CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val) \
pci_write_config_byte(dev, vsec + 0xa, val)
+#define CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, vsec, val) \
+ pci_bus_write_config_byte(bus, devfn, vsec + 0xa, val)
#define CXL_VSEC_PROTOCOL_MASK 0xe0
#define CXL_VSEC_PROTOCOL_1024TB 0x80
#define CXL_VSEC_PROTOCOL_512TB 0x40
@@ -352,13 +354,10 @@ static u64 get_capp_unit_id(struct device_node *np)
return 0;
}
-static int init_implementation_adapter_regs(struct cxl *adapter, struct pci_dev *dev)
+static int calc_capp_routing(struct pci_dev *dev, u64 *chipid, u64 *capp_unit_id)
{
struct device_node *np;
const __be32 *prop;
- u64 psl_dsnctl;
- u64 chipid;
- u64 capp_unit_id;
if (!(np = pnv_pci_get_phb_node(dev)))
return -ENODEV;
@@ -367,14 +366,28 @@ static int init_implementation_adapter_regs(struct cxl *adapter, struct pci_dev
np = of_get_next_parent(np);
if (!np)
return -ENODEV;
- chipid = be32_to_cpup(prop);
- capp_unit_id = get_capp_unit_id(np);
+ *chipid = be32_to_cpup(prop);
+ *capp_unit_id = get_capp_unit_id(np);
of_node_put(np);
- if (!capp_unit_id) {
+ if (!*capp_unit_id) {
pr_err("cxl: invalid capp unit id\n");
return -ENODEV;
}
+ return 0;
+}
+
+static int init_implementation_adapter_psl_regs(struct cxl *adapter, struct pci_dev *dev)
+{
+ u64 psl_dsnctl;
+ u64 chipid;
+ u64 capp_unit_id;
+ int rc;
+
+ rc = calc_capp_routing(dev, &chipid, &capp_unit_id);
+ if (rc)
+ return rc;
+
psl_dsnctl = 0x0000900000000000ULL; /* pteupd ttype, scdone */
psl_dsnctl |= (0x2ULL << (63-38)); /* MMIO hang pulse: 256 us */
/* Tell PSL where to route data to */
@@ -393,8 +406,61 @@ static int init_implementation_adapter_regs(struct cxl *adapter, struct pci_dev
return 0;
}
+static int init_implementation_adapter_xsl_regs(struct cxl *adapter, struct pci_dev *dev)
+{
+ u64 xsl_dsnctl;
+ u64 chipid;
+ u64 capp_unit_id;
+ int rc;
+
+ rc = calc_capp_routing(dev, &chipid, &capp_unit_id);
+ if (rc)
+ return rc;
+
+ /* Tell XSL where to route data to */
+ xsl_dsnctl = 0x0000600000000000ULL | (chipid << (63-5));
+ xsl_dsnctl |= (capp_unit_id << (63-13));
+ cxl_p1_write(adapter, CXL_XSL_DSNCTL, xsl_dsnctl);
+
+ return 0;
+}
+
+/* PSL & XSL */
+#define TBSYNC_CAL(n) (((u64)n & 0x7) << (63-3))
#define TBSYNC_CNT(n) (((u64)n & 0x7) << (63-6))
-#define _2048_250MHZ_CYCLES 1
+/* For the PSL this is a multiple for 0 < n <= 7: */
+#define PSL_2048_250MHZ_CYCLES 1
+
+static void write_timebase_ctrl_psl(struct cxl *adapter)
+{
+ cxl_p1_write(adapter, CXL_PSL_TB_CTLSTAT,
+ TBSYNC_CNT(2 * PSL_2048_250MHZ_CYCLES));
+}
+
+/* XSL */
+#define TBSYNC_ENA (1ULL << 63)
+/* For the XSL this is 2**n * 2000 clocks for 0 < n <= 6: */
+#define XSL_2000_CLOCKS 1
+#define XSL_4000_CLOCKS 2
+#define XSL_8000_CLOCKS 3
+
+static void write_timebase_ctrl_xsl(struct cxl *adapter)
+{
+ cxl_p1_write(adapter, CXL_XSL_TB_CTLSTAT,
+ TBSYNC_ENA |
+ TBSYNC_CAL(3) |
+ TBSYNC_CNT(XSL_4000_CLOCKS));
+}
+
+static u64 timebase_read_psl(struct cxl *adapter)
+{
+ return cxl_p1_read(adapter, CXL_PSL_Timebase);
+}
+
+static u64 timebase_read_xsl(struct cxl *adapter)
+{
+ return cxl_p1_read(adapter, CXL_XSL_Timebase);
+}
static void cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
{
@@ -421,8 +487,7 @@ static void cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
* Setup PSL Timebase Control and Status register
* with the recommended Timebase Sync Count value
*/
- cxl_p1_write(adapter, CXL_PSL_TB_CTLSTAT,
- TBSYNC_CNT(2 * _2048_250MHZ_CYCLES));
+ adapter->native->sl_ops->write_timebase_ctrl(adapter);
/* Enable PSL Timebase */
cxl_p1_write(adapter, CXL_PSL_Control, 0x0000000000000000);
@@ -435,7 +500,7 @@ static void cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
dev_info(&dev->dev, "PSL timebase can't synchronize\n");
return;
}
- psl_tb = cxl_p1_read(adapter, CXL_PSL_Timebase);
+ psl_tb = adapter->native->sl_ops->timebase_read(adapter);
delta = mftb() - psl_tb;
if (delta < 0)
delta = -delta;
@@ -445,7 +510,7 @@ static void cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
return;
}
-static int init_implementation_afu_regs(struct cxl_afu *afu)
+static int init_implementation_afu_psl_regs(struct cxl_afu *afu)
{
/* read/write masks for this slice */
cxl_p1n_write(afu, CXL_PSL_APCALLOC_A, 0xFFFFFFFEFEFEFEFEULL);
@@ -551,36 +616,234 @@ static int setup_cxl_bars(struct pci_dev *dev)
return 0;
}
-/* pciex node: ibm,opal-m64-window = <0x3d058 0x0 0x3d058 0x0 0x8 0x0>; */
-static int switch_card_to_cxl(struct pci_dev *dev)
-{
+#ifdef CONFIG_CXL_BIMODAL
+
+struct cxl_switch_work {
+ struct pci_dev *dev;
+ struct work_struct work;
int vsec;
+ int mode;
+};
+
+static void switch_card_to_cxl(struct work_struct *work)
+{
+ struct cxl_switch_work *switch_work =
+ container_of(work, struct cxl_switch_work, work);
+ struct pci_dev *dev = switch_work->dev;
+ struct pci_bus *bus = dev->bus;
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pci_dev *bridge;
+ struct pnv_php_slot *php_slot;
+ unsigned int devfn;
u8 val;
int rc;
- dev_info(&dev->dev, "switch card to CXL\n");
+ dev_info(&bus->dev, "cxl: Preparing for mode switch...\n");
+ bridge = list_first_entry_or_null(&hose->bus->devices, struct pci_dev,
+ bus_list);
+ if (!bridge) {
+ dev_WARN(&bus->dev, "cxl: Couldn't find root port!\n");
+ goto err_dev_put;
+ }
- if (!(vsec = find_cxl_vsec(dev))) {
- dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
+ php_slot = pnv_php_find_slot(pci_device_to_OF_node(bridge));
+ if (!php_slot) {
+ dev_err(&bus->dev, "cxl: Failed to find slot hotplug "
+ "information. You may need to upgrade "
+ "skiboot. Aborting.\n");
+ goto err_dev_put;
+ }
+
+ rc = CXL_READ_VSEC_MODE_CONTROL(dev, switch_work->vsec, &val);
+ if (rc) {
+ dev_err(&bus->dev, "cxl: Failed to read CAPI mode control: %i\n", rc);
+ goto err_dev_put;
+ }
+ devfn = dev->devfn;
+
+ /* Release the reference obtained in cxl_check_and_switch_mode() */
+ pci_dev_put(dev);
+
+ dev_dbg(&bus->dev, "cxl: Removing PCI devices from kernel\n");
+ pci_lock_rescan_remove();
+ pci_hp_remove_devices(bridge->subordinate);
+ pci_unlock_rescan_remove();
+
+ /* Switch the CXL protocol on the card */
+ if (switch_work->mode == CXL_BIMODE_CXL) {
+ dev_info(&bus->dev, "cxl: Switching card to CXL mode\n");
+ val &= ~CXL_VSEC_PROTOCOL_MASK;
+ val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
+ rc = pnv_cxl_enable_phb_kernel_api(hose, true);
+ if (rc) {
+ dev_err(&bus->dev, "cxl: Failed to enable kernel API"
+ " on real PHB, aborting\n");
+ goto err_free_work;
+ }
+ } else {
+ dev_WARN(&bus->dev, "cxl: Switching card to PCI mode not supported!\n");
+ goto err_free_work;
+ }
+
+ rc = CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, switch_work->vsec, val);
+ if (rc) {
+ dev_err(&bus->dev, "cxl: Failed to configure CXL protocol: %i\n", rc);
+ goto err_free_work;
+ }
+
+ /*
+ * The CAIA spec (v1.1, Section 10.6 Bi-modal Device Support) states
+ * we must wait 100ms after this mode switch before touching PCIe config
+ * space.
+ */
+ msleep(100);
+
+ /*
+ * Hot reset to cause the card to come back in cxl mode. A
+ * OPAL_RESET_PCI_LINK would be sufficient, but currently lacks support
+ * in skiboot, so we use a hot reset instead.
+ *
+ * We call pci_set_pcie_reset_state() on the bridge, as a CAPI card is
+ * guaranteed to sit directly under the root port, and setting the reset
+ * state on a device directly under the root port is equivalent to doing
+ * it on the root port iself.
+ */
+ dev_info(&bus->dev, "cxl: Configuration write complete, resetting card\n");
+ pci_set_pcie_reset_state(bridge, pcie_hot_reset);
+ pci_set_pcie_reset_state(bridge, pcie_deassert_reset);
+
+ dev_dbg(&bus->dev, "cxl: Offlining slot\n");
+ rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_OFFLINE);
+ if (rc) {
+ dev_err(&bus->dev, "cxl: OPAL offlining call failed: %i\n", rc);
+ goto err_free_work;
+ }
+
+ dev_dbg(&bus->dev, "cxl: Onlining and probing slot\n");
+ rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_ONLINE);
+ if (rc) {
+ dev_err(&bus->dev, "cxl: OPAL onlining call failed: %i\n", rc);
+ goto err_free_work;
+ }
+
+ pci_lock_rescan_remove();
+ pci_hp_add_devices(bridge->subordinate);
+ pci_unlock_rescan_remove();
+
+ dev_info(&bus->dev, "cxl: CAPI mode switch completed\n");
+ kfree(switch_work);
+ return;
+
+err_dev_put:
+ /* Release the reference obtained in cxl_check_and_switch_mode() */
+ pci_dev_put(dev);
+err_free_work:
+ kfree(switch_work);
+}
+
+int cxl_check_and_switch_mode(struct pci_dev *dev, int mode, int vsec)
+{
+ struct cxl_switch_work *work;
+ u8 val;
+ int rc;
+
+ if (!cpu_has_feature(CPU_FTR_HVMODE))
return -ENODEV;
+
+ if (!vsec) {
+ vsec = find_cxl_vsec(dev);
+ if (!vsec) {
+ dev_info(&dev->dev, "CXL VSEC not found\n");
+ return -ENODEV;
+ }
}
- if ((rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val))) {
- dev_err(&dev->dev, "failed to read current mode control: %i", rc);
+ rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
+ if (rc) {
+ dev_err(&dev->dev, "Failed to read current mode control: %i", rc);
return rc;
}
- val &= ~CXL_VSEC_PROTOCOL_MASK;
- val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
- if ((rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val))) {
- dev_err(&dev->dev, "failed to enable CXL protocol: %i", rc);
- return rc;
+
+ if (mode == CXL_BIMODE_PCI) {
+ if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
+ dev_info(&dev->dev, "Card is already in PCI mode\n");
+ return 0;
+ }
+ /*
+ * TODO: Before it's safe to switch the card back to PCI mode
+ * we need to disable the CAPP and make sure any cachelines the
+ * card holds have been flushed out. Needs skiboot support.
+ */
+ dev_WARN(&dev->dev, "CXL mode switch to PCI unsupported!\n");
+ return -EIO;
}
+
+ if (val & CXL_VSEC_PROTOCOL_ENABLE) {
+ dev_info(&dev->dev, "Card is already in CXL mode\n");
+ return 0;
+ }
+
+ dev_info(&dev->dev, "Card is in PCI mode, scheduling kernel thread "
+ "to switch to CXL mode\n");
+
+ work = kmalloc(sizeof(struct cxl_switch_work), GFP_KERNEL);
+ if (!work)
+ return -ENOMEM;
+
+ pci_dev_get(dev);
+ work->dev = dev;
+ work->vsec = vsec;
+ work->mode = mode;
+ INIT_WORK(&work->work, switch_card_to_cxl);
+
+ schedule_work(&work->work);
+
/*
- * The CAIA spec (v0.12 11.6 Bi-modal Device Support) states
- * we must wait 100ms after this mode switch before touching
- * PCIe config space.
+ * We return a failure now to abort the driver init. Once the
+ * link has been cycled and the card is in cxl mode we will
+ * come back (possibly using the generic cxl driver), but
+ * return success as the card should then be in cxl mode.
+ *
+ * TODO: What if the card comes back in PCI mode even after
+ * the switch? Don't want to spin endlessly.
*/
- msleep(100);
+ return -EBUSY;
+}
+EXPORT_SYMBOL_GPL(cxl_check_and_switch_mode);
+
+#endif /* CONFIG_CXL_BIMODAL */
+
+static int setup_cxl_protocol_area(struct pci_dev *dev)
+{
+ u8 val;
+ int rc;
+ int vsec = find_cxl_vsec(dev);
+
+ if (!vsec) {
+ dev_info(&dev->dev, "CXL VSEC not found\n");
+ return -ENODEV;
+ }
+
+ rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
+ if (rc) {
+ dev_err(&dev->dev, "Failed to read current mode control: %i\n", rc);
+ return rc;
+ }
+
+ if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
+ dev_err(&dev->dev, "Card not in CAPI mode!\n");
+ return -EIO;
+ }
+
+ if ((val & CXL_VSEC_PROTOCOL_MASK) != CXL_VSEC_PROTOCOL_256TB) {
+ val &= ~CXL_VSEC_PROTOCOL_MASK;
+ val |= CXL_VSEC_PROTOCOL_256TB;
+ rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val);
+ if (rc) {
+ dev_err(&dev->dev, "Failed to set CXL protocol area: %i\n", rc);
+ return rc;
+ }
+ }
return 0;
}
@@ -712,6 +975,21 @@ static int cxl_afu_descriptor_looks_ok(struct cxl_afu *afu)
}
}
+ if ((afu->modes_supported & ~CXL_MODE_DEDICATED) && afu->max_procs_virtualised == 0) {
+ /*
+ * We could also check this for the dedicated process model
+ * since the architecture indicates it should be set to 1, but
+ * in that case we ignore the value and I'd rather not risk
+ * breaking any existing dedicated process AFUs that left it as
+ * 0 (not that I'm aware of any). It is clearly an error for an
+ * AFU directed AFU to set this to 0, and would have previously
+ * triggered a bug resulting in the maximum not being enforced
+ * at all since idr_alloc treats 0 as no maximum.
+ */
+ dev_err(&afu->dev, "AFU does not support any processes\n");
+ return -EINVAL;
+ }
+
return 0;
}
@@ -753,11 +1031,13 @@ static int sanitise_afu_regs(struct cxl_afu *afu)
else
cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_A);
}
- reg = cxl_p1n_read(afu, CXL_PSL_SERR_An);
- if (reg) {
- if (reg & ~0xffff)
- dev_warn(&afu->dev, "AFU had pending SERR: %#016llx\n", reg);
- cxl_p1n_write(afu, CXL_PSL_SERR_An, reg & ~0xffff);
+ if (afu->adapter->native->sl_ops->register_serr_irq) {
+ reg = cxl_p1n_read(afu, CXL_PSL_SERR_An);
+ if (reg) {
+ if (reg & ~0xffff)
+ dev_warn(&afu->dev, "AFU had pending SERR: %#016llx\n", reg);
+ cxl_p1n_write(afu, CXL_PSL_SERR_An, reg & ~0xffff);
+ }
}
reg = cxl_p2n_read(afu, CXL_PSL_ErrStat_An);
if (reg) {
@@ -835,11 +1115,13 @@ static int pci_configure_afu(struct cxl_afu *afu, struct cxl *adapter, struct pc
if ((rc = cxl_afu_descriptor_looks_ok(afu)))
goto err1;
- if ((rc = init_implementation_afu_regs(afu)))
- goto err1;
+ if (adapter->native->sl_ops->afu_regs_init)
+ if ((rc = adapter->native->sl_ops->afu_regs_init(afu)))
+ goto err1;
- if ((rc = cxl_native_register_serr_irq(afu)))
- goto err1;
+ if (adapter->native->sl_ops->register_serr_irq)
+ if ((rc = adapter->native->sl_ops->register_serr_irq(afu)))
+ goto err1;
if ((rc = cxl_native_register_psl_irq(afu)))
goto err2;
@@ -847,7 +1129,8 @@ static int pci_configure_afu(struct cxl_afu *afu, struct cxl *adapter, struct pc
return 0;
err2:
- cxl_native_release_serr_irq(afu);
+ if (adapter->native->sl_ops->release_serr_irq)
+ adapter->native->sl_ops->release_serr_irq(afu);
err1:
pci_unmap_slice_regs(afu);
return rc;
@@ -856,7 +1139,8 @@ err1:
static void pci_deconfigure_afu(struct cxl_afu *afu)
{
cxl_native_release_psl_irq(afu);
- cxl_native_release_serr_irq(afu);
+ if (afu->adapter->native->sl_ops->release_serr_irq)
+ afu->adapter->native->sl_ops->release_serr_irq(afu);
pci_unmap_slice_regs(afu);
}
@@ -1165,7 +1449,7 @@ static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
if ((rc = setup_cxl_bars(dev)))
return rc;
- if ((rc = switch_card_to_cxl(dev)))
+ if ((rc = setup_cxl_protocol_area(dev)))
return rc;
if ((rc = cxl_update_image_control(adapter)))
@@ -1177,10 +1461,13 @@ static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
if ((rc = sanitise_adapter_regs(adapter)))
goto err;
- if ((rc = init_implementation_adapter_regs(adapter, dev)))
+ if ((rc = adapter->native->sl_ops->adapter_regs_init(adapter, dev)))
goto err;
- if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_CAPI)))
+ /* Required for devices using CAPP DMA mode, harmless for others */
+ pci_set_master(dev);
+
+ if ((rc = pnv_phb_to_cxl_mode(dev, adapter->native->sl_ops->capi_mode)))
goto err;
/* If recovery happened, the last step is to turn on snooping.
@@ -1212,6 +1499,43 @@ static void cxl_deconfigure_adapter(struct cxl *adapter)
pci_disable_device(pdev);
}
+static const struct cxl_service_layer_ops psl_ops = {
+ .adapter_regs_init = init_implementation_adapter_psl_regs,
+ .afu_regs_init = init_implementation_afu_psl_regs,
+ .register_serr_irq = cxl_native_register_serr_irq,
+ .release_serr_irq = cxl_native_release_serr_irq,
+ .debugfs_add_adapter_sl_regs = cxl_debugfs_add_adapter_psl_regs,
+ .debugfs_add_afu_sl_regs = cxl_debugfs_add_afu_psl_regs,
+ .psl_irq_dump_registers = cxl_native_psl_irq_dump_regs,
+ .err_irq_dump_registers = cxl_native_err_irq_dump_regs,
+ .debugfs_stop_trace = cxl_stop_trace,
+ .write_timebase_ctrl = write_timebase_ctrl_psl,
+ .timebase_read = timebase_read_psl,
+ .capi_mode = OPAL_PHB_CAPI_MODE_CAPI,
+ .needs_reset_before_disable = true,
+};
+
+static const struct cxl_service_layer_ops xsl_ops = {
+ .adapter_regs_init = init_implementation_adapter_xsl_regs,
+ .debugfs_add_adapter_sl_regs = cxl_debugfs_add_adapter_xsl_regs,
+ .write_timebase_ctrl = write_timebase_ctrl_xsl,
+ .timebase_read = timebase_read_xsl,
+ .capi_mode = OPAL_PHB_CAPI_MODE_DMA,
+ .min_pe = 1, /* Workaround for Mellanox CX4 HW bug */
+};
+
+static void set_sl_ops(struct cxl *adapter, struct pci_dev *dev)
+{
+ if (dev->vendor == PCI_VENDOR_ID_MELLANOX && dev->device == 0x1013) {
+ dev_info(&adapter->dev, "Device uses an XSL\n");
+ adapter->native->sl_ops = &xsl_ops;
+ } else {
+ dev_info(&adapter->dev, "Device uses a PSL\n");
+ adapter->native->sl_ops = &psl_ops;
+ }
+}
+
+
static struct cxl *cxl_pci_init_adapter(struct pci_dev *dev)
{
struct cxl *adapter;
@@ -1227,6 +1551,8 @@ static struct cxl *cxl_pci_init_adapter(struct pci_dev *dev)
goto err_release;
}
+ set_sl_ops(adapter, dev);
+
/* Set defaults for parameters which need to persist over
* configure/reconfigure
*/
@@ -1280,6 +1606,67 @@ static void cxl_pci_remove_adapter(struct cxl *adapter)
device_unregister(&adapter->dev);
}
+#define CXL_MAX_PCIEX_PARENT 2
+
+static int cxl_slot_is_switched(struct pci_dev *dev)
+{
+ struct device_node *np;
+ int depth = 0;
+ const __be32 *prop;
+
+ if (!(np = pci_device_to_OF_node(dev))) {
+ pr_err("cxl: np = NULL\n");
+ return -ENODEV;
+ }
+ of_node_get(np);
+ while (np) {
+ np = of_get_next_parent(np);
+ prop = of_get_property(np, "device_type", NULL);
+ if (!prop || strcmp((char *)prop, "pciex"))
+ break;
+ depth++;
+ }
+ of_node_put(np);
+ return (depth > CXL_MAX_PCIEX_PARENT);
+}
+
+bool cxl_slot_is_supported(struct pci_dev *dev, int flags)
+{
+ if (!cpu_has_feature(CPU_FTR_HVMODE))
+ return false;
+
+ if ((flags & CXL_SLOT_FLAG_DMA) && (!pvr_version_is(PVR_POWER8NVL))) {
+ /*
+ * CAPP DMA mode is technically supported on regular P8, but
+ * will EEH if the card attempts to access memory < 4GB, which
+ * we cannot realistically avoid. We might be able to work
+ * around the issue, but until then return unsupported:
+ */
+ return false;
+ }
+
+ if (cxl_slot_is_switched(dev))
+ return false;
+
+ /*
+ * XXX: This gets a little tricky on regular P8 (not POWER8NVL) since
+ * the CAPP can be connected to PHB 0, 1 or 2 on a first come first
+ * served basis, which is racy to check from here. If we need to
+ * support this in future we might need to consider having this
+ * function effectively reserve it ahead of time.
+ *
+ * Currently, the only user of this API is the Mellanox CX4, which is
+ * only supported on P8NVL due to the above mentioned limitation of
+ * CAPP DMA mode and therefore does not need to worry about this. If the
+ * issue with CAPP DMA mode is later worked around on P8 we might need
+ * to revisit this.
+ */
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(cxl_slot_is_supported);
+
+
static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct cxl *adapter;
@@ -1291,6 +1678,11 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
}
+ if (cxl_slot_is_switched(dev)) {
+ dev_info(&dev->dev, "Ignoring card on incompatible PCI slot\n");
+ return -ENODEV;
+ }
+
if (cxl_verbose)
dump_cxl_config_space(dev);
@@ -1311,6 +1703,9 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev_err(&dev->dev, "AFU %i failed to start: %i\n", slice, rc);
}
+ if (pnv_pci_on_cxl_phb(dev) && adapter->slices >= 1)
+ pnv_cxl_phb_set_peer_afu(dev, adapter->afu[0]);
+
return 0;
}
@@ -1381,6 +1776,9 @@ static pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev,
*/
for (i = 0; i < adapter->slices; i++) {
afu = adapter->afu[i];
+ /* Only participate in EEH if we are on a virtual PHB */
+ if (afu->phb == NULL)
+ return PCI_ERS_RESULT_NONE;
cxl_vphb_error_detected(afu, state);
}
return PCI_ERS_RESULT_DISCONNECT;