diff options
Diffstat (limited to 'drivers/mmc/host/dw_mmc.c')
| -rw-r--r-- | drivers/mmc/host/dw_mmc.c | 48 |
1 files changed, 35 insertions, 13 deletions
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 581f5d0271f4..03ac8d599763 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -380,7 +380,7 @@ static void dw_mci_start_command(struct dw_mci *host, static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data) { - struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort; + struct mmc_command *stop = &host->stop_abort; dw_mci_start_command(host, stop, host->stop_cmdr); } @@ -701,6 +701,7 @@ static int dw_mci_edmac_start_dma(struct dw_mci *host, int ret = 0; /* Set external dma config: burst size, burst width */ + memset(&cfg, 0, sizeof(cfg)); cfg.dst_addr = host->phy_regs + fifo_offset; cfg.src_addr = cfg.dst_addr; cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; @@ -1202,10 +1203,7 @@ static void __dw_mci_start_request(struct dw_mci *host, spin_unlock_irqrestore(&host->irq_lock, irqflags); } - if (mrq->stop) - host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop); - else - host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd); + host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd); } static void dw_mci_start_request(struct dw_mci *host, @@ -1744,8 +1742,34 @@ static void dw_mci_tasklet_func(unsigned long priv) } if (cmd->data && err) { - dw_mci_stop_dma(host); + /* + * During UHS tuning sequence, sending the stop + * command after the response CRC error would + * throw the system into a confused state + * causing all future tuning phases to report + * failure. + * + * In such case controller will move into a data + * transfer state after a response error or + * response CRC error. Let's let that finish + * before trying to send a stop, so we'll go to + * STATE_SENDING_DATA. + * + * Although letting the data transfer take place + * will waste a bit of time (we already know + * the command was bad), it can't cause any + * errors since it's possible it would have + * taken place anyway if this tasklet got + * delayed. Allowing the transfer to take place + * avoids races and keeps things simple. + */ + if (err != -ETIMEDOUT) { + state = STATE_SENDING_DATA; + continue; + } + send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_SENDING_STOP; break; } @@ -1769,11 +1793,10 @@ static void dw_mci_tasklet_func(unsigned long priv) */ if (test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)) { - dw_mci_stop_dma(host); - if (data->stop || - !(host->data_status & (SDMMC_INT_DRTO | + if (!(host->data_status & (SDMMC_INT_DRTO | SDMMC_INT_EBE))) send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_DATA_ERROR; break; } @@ -1807,11 +1830,10 @@ static void dw_mci_tasklet_func(unsigned long priv) */ if (test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)) { - dw_mci_stop_dma(host); - if (data->stop || - !(host->data_status & (SDMMC_INT_DRTO | + if (!(host->data_status & (SDMMC_INT_DRTO | SDMMC_INT_EBE))) send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_DATA_ERROR; break; } @@ -1886,7 +1908,7 @@ static void dw_mci_tasklet_func(unsigned long priv) host->cmd = NULL; host->data = NULL; - if (mrq->stop) + if (!mrq->sbc && mrq->stop) dw_mci_command_complete(host, mrq->stop); else host->cmd_status = 0; |