1 files changed, 104 insertions, 51 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 37b2a9ae52ef..ada1a3ea3a87 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -707,19 +707,28 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
 	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 {
 	u8 count;
+
+	if (host->ops->set_timeout) {
+		host->ops->set_timeout(host, cmd);
+	} else {
+		count = sdhci_calc_timeout(host, cmd);
+		sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+	}
+}
+
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+{
 	u8 ctrl;
 	struct mmc_data *data = cmd->data;
 	int ret;
 
 	WARN_ON(host->data);
 
-	if (data || (cmd->flags & MMC_RSP_BUSY)) {
-		count = sdhci_calc_timeout(host, cmd);
-		sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
-	}
+	if (data || (cmd->flags & MMC_RSP_BUSY))
+		sdhci_set_timeout(host, cmd);
 
 	if (!data)
 		return;
@@ -1007,6 +1016,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	mod_timer(&host->timer, timeout);
 
 	host->cmd = cmd;
+	host->busy_handle = 0;
 
 	sdhci_prepare_data(host, cmd);
 
@@ -1194,7 +1204,6 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 clock_set:
 	if (real_div)
 		host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
-
 	clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
 	clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
 		<< SDHCI_DIVIDER_HI_SHIFT;
@@ -1357,11 +1366,12 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
 		/*
 		 * Check if the re-tuning timer has already expired and there
-		 * is no on-going data transfer. If so, we need to execute
-		 * tuning procedure before sending command.
+		 * is no on-going data transfer and DAT0 is not busy. If so,
+		 * we need to execute tuning procedure before sending command.
 		 */
 		if ((host->flags & SDHCI_NEEDS_RETUNING) &&
-		    !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
+		    !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ)) &&
+		    (present_state & SDHCI_DATA_0_LVL_MASK)) {
 			if (mmc->card) {
 				/* eMMC uses cmd21 but sd and sdio use cmd19 */
 				tuning_opcode =
@@ -1471,6 +1481,18 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 	if (!ios->clock || ios->clock != host->clock) {
 		host->ops->set_clock(host, ios->clock);
 		host->clock = ios->clock;
+
+		if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK &&
+		    host->clock) {
+			host->timeout_clk = host->mmc->actual_clock ?
+						host->mmc->actual_clock / 1000 :
+						host->clock / 1000;
+			host->mmc->max_busy_timeout =
+				host->ops->get_max_timeout_count ?
+				host->ops->get_max_timeout_count(host) :
+				1 << 27;
+			host->mmc->max_busy_timeout /= host->timeout_clk;
+		}
 	}
 
 	sdhci_set_power(host, ios->power_mode, ios->vdd);
@@ -1733,8 +1755,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
 						    3600000);
 			if (ret) {
-				pr_warning("%s: Switching to 3.3V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -1746,8 +1768,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		if (!(ctrl & SDHCI_CTRL_VDD_180))
 			return 0;
 
-		pr_warning("%s: 3.3V regulator output did not became stable\n",
-				mmc_hostname(mmc));
+		pr_warn("%s: 3.3V regulator output did not became stable\n",
+			mmc_hostname(mmc));
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
@@ -1755,8 +1777,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc,
 					1700000, 1950000);
 			if (ret) {
-				pr_warning("%s: Switching to 1.8V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -1773,8 +1795,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		if (ctrl & SDHCI_CTRL_VDD_180)
 			return 0;
 
-		pr_warning("%s: 1.8V regulator output did not became stable\n",
-				mmc_hostname(mmc));
+		pr_warn("%s: 1.8V regulator output did not became stable\n",
+			mmc_hostname(mmc));
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_120:
@@ -1782,8 +1804,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
 						    1300000);
 			if (ret) {
-				pr_warning("%s: Switching to 1.2V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -2203,7 +2225,7 @@ static void sdhci_tuning_timer(unsigned long data)
  *                                                                           *
 \*****************************************************************************/
 
-static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
+static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask)
 {
 	BUG_ON(intmask == 0);
 
@@ -2241,11 +2263,18 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
 		if (host->cmd->data)
 			DBG("Cannot wait for busy signal when also "
 				"doing a data transfer");
-		else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
+		else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)
+				&& !host->busy_handle) {
+			/* Mark that command complete before busy is ended */
+			host->busy_handle = 1;
 			return;
+		}
 
 		/* The controller does not support the end-of-busy IRQ,
 		 * fall through and take the SDHCI_INT_RESPONSE */
+	} else if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
+		   host->cmd->opcode == MMC_STOP_TRANSMISSION && !host->data) {
+		*mask &= ~SDHCI_INT_DATA_END;
 	}
 
 	if (intmask & SDHCI_INT_RESPONSE)
@@ -2304,8 +2333,21 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		 * above in sdhci_cmd_irq().
 		 */
 		if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
+			if (intmask & SDHCI_INT_DATA_TIMEOUT) {
+				host->cmd->error = -ETIMEDOUT;
+				tasklet_schedule(&host->finish_tasklet);
+				return;
+			}
 			if (intmask & SDHCI_INT_DATA_END) {
-				sdhci_finish_command(host);
+				/*
+				 * Some cards handle busy-end interrupt
+				 * before the command completed, so make
+				 * sure we do things in the proper order.
+				 */
+				if (host->busy_handle)
+					sdhci_finish_command(host);
+				else
+					host->busy_handle = 1;
 				return;
 			}
 		}
@@ -2442,7 +2484,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 		}
 
 		if (intmask & SDHCI_INT_CMD_MASK)
-			sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
+			sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK,
+				      &intmask);
 
 		if (intmask & SDHCI_INT_DATA_MASK)
 			sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
@@ -2534,7 +2577,7 @@ void sdhci_enable_irq_wakeups(struct sdhci_host *host)
 }
 EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
 
-void sdhci_disable_irq_wakeups(struct sdhci_host *host)
+static void sdhci_disable_irq_wakeups(struct sdhci_host *host)
 {
 	u8 val;
 	u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
@@ -2544,7 +2587,6 @@ void sdhci_disable_irq_wakeups(struct sdhci_host *host)
 	val &= ~mask;
 	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
 }
-EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups);
 
 int sdhci_suspend_host(struct sdhci_host *host)
 {
@@ -2749,6 +2791,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	u32 caps[2] = {0, 0};
 	u32 max_current_caps;
 	unsigned int ocr_avail;
+	unsigned int override_timeout_clk;
 	int ret;
 
 	WARN_ON(host == NULL);
@@ -2762,6 +2805,8 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (debug_quirks2)
 		host->quirks2 = debug_quirks2;
 
+	override_timeout_clk = host->timeout_clk;
+
 	sdhci_do_reset(host, SDHCI_RESET_ALL);
 
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
@@ -2807,8 +2852,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
 		if (host->ops->enable_dma) {
 			if (host->ops->enable_dma(host)) {
-				pr_warning("%s: No suitable DMA "
-					"available. Falling back to PIO.\n",
+				pr_warn("%s: No suitable DMA available - falling back to PIO\n",
 					mmc_hostname(mmc));
 				host->flags &=
 					~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
@@ -2830,15 +2874,14 @@ int sdhci_add_host(struct sdhci_host *host)
 			dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
 					  host->adma_desc, host->adma_addr);
 			kfree(host->align_buffer);
-			pr_warning("%s: Unable to allocate ADMA "
-				"buffers. Falling back to standard DMA.\n",
+			pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
 				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
 			host->adma_desc = NULL;
 			host->align_buffer = NULL;
 		} else if (host->adma_addr & 3) {
-			pr_warning("%s: unable to allocate aligned ADMA descriptor\n",
-				   mmc_hostname(mmc));
+			pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
+				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
 			dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
 					  host->adma_desc, host->adma_addr);
@@ -2908,25 +2951,30 @@ int sdhci_add_host(struct sdhci_host *host)
 	} else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
-	host->timeout_clk =
-		(caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
-	if (host->timeout_clk == 0) {
-		if (host->ops->get_timeout_clock) {
-			host->timeout_clk = host->ops->get_timeout_clock(host);
-		} else if (!(host->quirks &
-				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
-			pr_err("%s: Hardware doesn't specify timeout clock "
-			       "frequency.\n", mmc_hostname(mmc));
-			return -ENODEV;
+	if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
+		host->timeout_clk = (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >>
+					SDHCI_TIMEOUT_CLK_SHIFT;
+		if (host->timeout_clk == 0) {
+			if (host->ops->get_timeout_clock) {
+				host->timeout_clk =
+					host->ops->get_timeout_clock(host);
+			} else {
+				pr_err("%s: Hardware doesn't specify timeout clock frequency.\n",
+					mmc_hostname(mmc));
+				return -ENODEV;
+			}
 		}
-	}
-	if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
-		host->timeout_clk *= 1000;
 
-	if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-		host->timeout_clk = mmc->f_max / 1000;
+		if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
+			host->timeout_clk *= 1000;
 
-	mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
+		mmc->max_busy_timeout = host->ops->get_max_timeout_count ?
+			host->ops->get_max_timeout_count(host) : 1 << 27;
+		mmc->max_busy_timeout /= host->timeout_clk;
+	}
+
+	if (override_timeout_clk)
+		host->timeout_clk = override_timeout_clk;
 
 	mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
 	mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
@@ -2998,8 +3046,13 @@ int sdhci_add_host(struct sdhci_host *host)
 		/* SD3.0: SDR104 is supported so (for eMMC) the caps2
 		 * field can be promoted to support HS200.
 		 */
-		if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
+		if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) {
 			mmc->caps2 |= MMC_CAP2_HS200;
+			if (IS_ERR(mmc->supply.vqmmc) ||
+					!regulator_is_supported_voltage
+					(mmc->supply.vqmmc, 1100000, 1300000))
+				mmc->caps2 &= ~MMC_CAP2_HS200_1_2V_SDR;
+		}
 	} else if (caps[1] & SDHCI_SUPPORT_SDR50)
 		mmc->caps |= MMC_CAP_UHS_SDR50;
 
@@ -3049,7 +3102,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	 */
 	max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
 	if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
-		u32 curr = regulator_get_current_limit(mmc->supply.vmmc);
+		int curr = regulator_get_current_limit(mmc->supply.vmmc);
 		if (curr > 0) {
 
 			/* convert to SDHCI_MAX_CURRENT format */
@@ -3158,8 +3211,8 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
 				SDHCI_MAX_BLOCK_SHIFT;
 		if (mmc->max_blk_size >= 3) {
-			pr_warning("%s: Invalid maximum block size, "
-				"assuming 512 bytes\n", mmc_hostname(mmc));
+			pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
+				mmc_hostname(mmc));
 			mmc->max_blk_size = 0;
 		}
 	}