summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/card/mmc_test.c2
-rw-r--r--drivers/mmc/core/mmc.c2
-rw-r--r--drivers/mmc/core/mmc_ops.c2
-rw-r--r--drivers/mmc/core/sdio_irq.c2
-rw-r--r--drivers/mmc/host/atmel-mci.c4
-rw-r--r--drivers/mmc/host/mmc_spi.c2
-rw-r--r--drivers/mmc/host/s3cmci.c6
-rw-r--r--drivers/mmc/host/tmio_mmc_pio.c2
-rw-r--r--drivers/mmc/host/wbsd.c6
9 files changed, 14 insertions, 14 deletions
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index f5cedeccad42..abc1a63bcc5e 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -292,7 +292,7 @@ static void mmc_test_free_mem(struct mmc_test_mem *mem)
}
/*
- * Allocate a lot of memory, preferrably max_sz but at least min_sz. In case
+ * Allocate a lot of memory, preferably max_sz but at least min_sz. In case
* there isn't much memory do not exceed 1/16th total lowmem pages. Also do
* not exceed a maximum number of segments and try not to make segments much
* bigger than maximum segment size.
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 14e95f39a7bf..772d0d0a541b 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -538,7 +538,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
/*
* If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF
- * bit. This bit will be lost everytime after a reset or power off.
+ * bit. This bit will be lost every time after a reset or power off.
*/
if (card->ext_csd.enhanced_area_en) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 60842f878ded..f3b22bf89cc9 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -105,7 +105,7 @@ int mmc_go_idle(struct mmc_host *host)
* that in case of hardware that won't pull up DAT3/nCS otherwise.
*
* SPI hosts ignore ios.chip_select; it's managed according to
- * rules that must accomodate non-MMC slaves which this layer
+ * rules that must accommodate non-MMC slaves which this layer
* won't even know about.
*/
if (!mmc_host_is_spi(host)) {
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index bb192f90e8e9..b3001617e67d 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -45,7 +45,7 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
struct sdio_func *func = card->sdio_func[i - 1];
if (!func) {
printk(KERN_WARNING "%s: pending IRQ for "
- "non-existant function\n",
+ "non-existent function\n",
mmc_card_id(card));
ret = -EINVAL;
} else if (func->irq_handler) {
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 80bc9a5c25cc..ea3888b65d5d 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -127,7 +127,7 @@ struct atmel_mci_dma {
* EVENT_DATA_COMPLETE is set in @pending_events, all data-related
* interrupts must be disabled and @data_status updated with a
* snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
* snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
* bytes_xfered field of @data must be written. This is ensured by
* using barriers.
@@ -1082,7 +1082,7 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
/*
* Update the MMC clock rate if necessary. This may be
* necessary if set_ios() is called when a different slot is
- * busy transfering data.
+ * busy transferring data.
*/
if (host->need_clock_update) {
mci_writel(host, MR, host->mode_reg);
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 2f7fc0c5146f..7c1e16aaf17f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -99,7 +99,7 @@
#define r1b_timeout (HZ * 3)
/* One of the critical speed parameters is the amount of data which may
- * be transfered in one command. If this value is too low, the SD card
+ * be transferred in one command. If this value is too low, the SD card
* controller has to do multiple partial block writes (argggh!). With
* today (2008) SD cards there is little speed gain if we transfer more
* than 64 KBytes at a time. So use this value until there is any indication
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 1ccd4b256cee..a04f87d7ee3d 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -874,7 +874,7 @@ static void finalize_request(struct s3cmci_host *host)
if (!mrq->data)
goto request_done;
- /* Calulate the amout of bytes transfer if there was no error */
+ /* Calculate the amout of bytes transfer if there was no error */
if (mrq->data->error == 0) {
mrq->data->bytes_xfered =
(mrq->data->blocks * mrq->data->blksz);
@@ -882,7 +882,7 @@ static void finalize_request(struct s3cmci_host *host)
mrq->data->bytes_xfered = 0;
}
- /* If we had an error while transfering data we flush the
+ /* If we had an error while transferring data we flush the
* DMA channel and the fifo to clear out any garbage. */
if (mrq->data->error != 0) {
if (s3cmci_host_usedma(host))
@@ -980,7 +980,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
if ((data->blksz & 3) != 0) {
/* We cannot deal with unaligned blocks with more than
- * one block being transfered. */
+ * one block being transferred. */
if (data->blocks > 1) {
pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 6ae8d2f00ec7..62d37de6de76 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -355,7 +355,7 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
/*
* This chip always returns (at least?) as much data as you ask for.
* I'm unsure what happens if you ask for less than a block. This should be
- * looked into to ensure that a funny length read doesnt hose the controller.
+ * looked into to ensure that a funny length read doesn't hose the controller.
*/
static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
{
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 7fca0a386ba0..62e5a4d171e1 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -484,7 +484,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
/*
* Check that we aren't being called after the
- * entire buffer has been transfered.
+ * entire buffer has been transferred.
*/
if (host->num_sg == 0)
return;
@@ -828,7 +828,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
/*
* If this is a data transfer the request
* will be finished after the data has
- * transfered.
+ * transferred.
*/
if (cmd->data && !cmd->error) {
/*
@@ -904,7 +904,7 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
setup &= ~WBSD_DAT3_H;
/*
- * We cannot resume card detection immediatly
+ * We cannot resume card detection immediately
* because of capacitance and delays in the chip.
*/
mod_timer(&host->ignore_timer, jiffies + HZ / 100);