diff options
Diffstat (limited to 'drivers/mtd/chips/jedec.c')
| -rw-r--r-- | drivers/mtd/chips/jedec.c | 935 |
1 files changed, 0 insertions, 935 deletions
diff --git a/drivers/mtd/chips/jedec.c b/drivers/mtd/chips/jedec.c deleted file mode 100644 index 14e57b2bf842..000000000000 --- a/drivers/mtd/chips/jedec.c +++ /dev/null @@ -1,935 +0,0 @@ - -/* JEDEC Flash Interface. - * This is an older type of interface for self programming flash. It is - * commonly use in older AMD chips and is obsolete compared with CFI. - * It is called JEDEC because the JEDEC association distributes the ID codes - * for the chips. - * - * See the AMD flash databook for information on how to operate the interface. - * - * This code does not support anything wider than 8 bit flash chips, I am - * not going to guess how to send commands to them, plus I expect they will - * all speak CFI.. - * - * $Id: jedec.c,v 1.22 2005/01/05 18:05:11 dwmw2 Exp $ - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/mtd/jedec.h> -#include <linux/mtd/map.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/compatmac.h> - -static struct mtd_info *jedec_probe(struct map_info *); -static int jedec_probe8(struct map_info *map,unsigned long base, - struct jedec_private *priv); -static int jedec_probe16(struct map_info *map,unsigned long base, - struct jedec_private *priv); -static int jedec_probe32(struct map_info *map,unsigned long base, - struct jedec_private *priv); -static void jedec_flash_chip_scan(struct jedec_private *priv,unsigned long start, - unsigned long len); -static int flash_erase(struct mtd_info *mtd, struct erase_info *instr); -static int flash_write(struct mtd_info *mtd, loff_t start, size_t len, - size_t *retlen, const u_char *buf); - -static unsigned long my_bank_size; - -/* Listing of parts and sizes. We need this table to learn the sector - size of the chip and the total length */ -static const struct JEDECTable JEDEC_table[] = { - { - .jedec = 0x013D, - .name = "AMD Am29F017D", - .size = 2*1024*1024, - .sectorsize = 64*1024, - .capabilities = MTD_CAP_NORFLASH - }, - { - .jedec = 0x01AD, - .name = "AMD Am29F016", - .size = 2*1024*1024, - .sectorsize = 64*1024, - .capabilities = MTD_CAP_NORFLASH - }, - { - .jedec = 0x01D5, - .name = "AMD Am29F080", - .size = 1*1024*1024, - .sectorsize = 64*1024, - .capabilities = MTD_CAP_NORFLASH - }, - { - .jedec = 0x01A4, - .name = "AMD Am29F040", - .size = 512*1024, - .sectorsize = 64*1024, - .capabilities = MTD_CAP_NORFLASH - }, - { - .jedec = 0x20E3, - .name = "AMD Am29W040B", - .size = 512*1024, - .sectorsize = 64*1024, - .capabilities = MTD_CAP_NORFLASH - }, - { - .jedec = 0xC2AD, - .name = "Macronix MX29F016", - .size = 2*1024*1024, - .sectorsize = 64*1024, - .capabilities = MTD_CAP_NORFLASH - }, - { .jedec = 0x0 } -}; - -static const struct JEDECTable *jedec_idtoinf(__u8 mfr,__u8 id); -static void jedec_sync(struct mtd_info *mtd) {}; -static int jedec_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); -static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); - -static struct mtd_info *jedec_probe(struct map_info *map); - - - -static struct mtd_chip_driver jedec_chipdrv = { - .probe = jedec_probe, - .name = "jedec", - .module = THIS_MODULE -}; - -/* Probe entry point */ - -static struct mtd_info *jedec_probe(struct map_info *map) -{ - struct mtd_info *MTD; - struct jedec_private *priv; - unsigned long Base; - unsigned long SectorSize; - unsigned count; - unsigned I,Uniq; - char Part[200]; - memset(&priv,0,sizeof(priv)); - - MTD = kzalloc(sizeof(struct mtd_info) + sizeof(struct jedec_private), GFP_KERNEL); - if (!MTD) - return NULL; - - priv = (struct jedec_private *)&MTD[1]; - - my_bank_size = map->size; - - if (map->size/my_bank_size > MAX_JEDEC_CHIPS) - { - printk("mtd: Increase MAX_JEDEC_CHIPS, too many banks.\n"); - kfree(MTD); - return NULL; - } - - for (Base = 0; Base < map->size; Base += my_bank_size) - { - // Perhaps zero could designate all tests? - if (map->buswidth == 0) - map->buswidth = 1; - - if (map->buswidth == 1){ - if (jedec_probe8(map,Base,priv) == 0) { - printk("did recognize jedec chip\n"); - kfree(MTD); - return NULL; - } - } - if (map->buswidth == 2) - jedec_probe16(map,Base,priv); - if (map->buswidth == 4) - jedec_probe32(map,Base,priv); - } - - // Get the biggest sector size - SectorSize = 0; - for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++) - { - // printk("priv->chips[%d].jedec is %x\n",I,priv->chips[I].jedec); - // printk("priv->chips[%d].sectorsize is %lx\n",I,priv->chips[I].sectorsize); - if (priv->chips[I].sectorsize > SectorSize) - SectorSize = priv->chips[I].sectorsize; - } - - // Quickly ensure that the other sector sizes are factors of the largest - for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++) - { - if ((SectorSize/priv->chips[I].sectorsize)*priv->chips[I].sectorsize != SectorSize) - { - printk("mtd: Failed. Device has incompatible mixed sector sizes\n"); - kfree(MTD); - return NULL; - } - } - - /* Generate a part name that includes the number of different chips and - other configuration information */ - count = 1; - strlcpy(Part,map->name,sizeof(Part)-10); - strcat(Part," "); - Uniq = 0; - for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++) - { - const struct JEDECTable *JEDEC; - - if (priv->chips[I+1].jedec == priv->chips[I].jedec) - { - count++; - continue; - } - - // Locate the chip in the jedec table - JEDEC = jedec_idtoinf(priv->chips[I].jedec >> 8,priv->chips[I].jedec); - if (JEDEC == 0) - { - printk("mtd: Internal Error, JEDEC not set\n"); - kfree(MTD); - return NULL; - } - - if (Uniq != 0) - strcat(Part,","); - Uniq++; - - if (count != 1) - sprintf(Part+strlen(Part),"%x*[%s]",count,JEDEC->name); - else - sprintf(Part+strlen(Part),"%s",JEDEC->name); - if (strlen(Part) > sizeof(Part)*2/3) - break; - count = 1; - } - - /* Determine if the chips are organized in a linear fashion, or if there - are empty banks. Note, the last bank does not count here, only the - first banks are important. Holes on non-bank boundaries can not exist - due to the way the detection algorithm works. */ - if (priv->size < my_bank_size) - my_bank_size = priv->size; - priv->is_banked = 0; - //printk("priv->size is %x, my_bank_size is %x\n",priv->size,my_bank_size); - //printk("priv->bank_fill[0] is %x\n",priv->bank_fill[0]); - if (!priv->size) { - printk("priv->size is zero\n"); - kfree(MTD); - return NULL; - } - if (priv->size/my_bank_size) { - if (priv->size/my_bank_size == 1) { - priv->size = my_bank_size; - } - else { - for (I = 0; I != priv->size/my_bank_size - 1; I++) - { - if (priv->bank_fill[I] != my_bank_size) - priv->is_banked = 1; - - /* This even could be eliminated, but new de-optimized read/write - functions have to be written */ - printk("priv->bank_fill[%d] is %lx, priv->bank_fill[0] is %lx\n",I,priv->bank_fill[I],priv->bank_fill[0]); - if (priv->bank_fill[I] != priv->bank_fill[0]) - { - printk("mtd: Failed. Cannot handle unsymmetric banking\n"); - kfree(MTD); - return NULL; - } - } - } - } - if (priv->is_banked == 1) - strcat(Part,", banked"); - - // printk("Part: '%s'\n",Part); - - memset(MTD,0,sizeof(*MTD)); - // strlcpy(MTD->name,Part,sizeof(MTD->name)); - MTD->name = map->name; - MTD->type = MTD_NORFLASH; - MTD->flags = MTD_CAP_NORFLASH; - MTD->writesize = 1; - MTD->erasesize = SectorSize*(map->buswidth); - // printk("MTD->erasesize is %x\n",(unsigned int)MTD->erasesize); - MTD->size = priv->size; - // printk("MTD->size is %x\n",(unsigned int)MTD->size); - //MTD->module = THIS_MODULE; // ? Maybe this should be the low level module? - MTD->erase = flash_erase; - if (priv->is_banked == 1) - MTD->read = jedec_read_banked; - else - MTD->read = jedec_read; - MTD->write = flash_write; - MTD->sync = jedec_sync; - MTD->priv = map; - map->fldrv_priv = priv; - map->fldrv = &jedec_chipdrv; - __module_get(THIS_MODULE); - return MTD; -} - -/* Helper for the JEDEC function, JEDEC numbers all have odd parity */ -static int checkparity(u_char C) -{ - u_char parity = 0; - while (C != 0) - { - parity ^= C & 1; - C >>= 1; - } - - return parity == 1; -} - - -/* Take an array of JEDEC numbers that represent interleved flash chips - and process them. Check to make sure they are good JEDEC numbers, look - them up and then add them to the chip list */ -static int handle_jedecs(struct map_info *map,__u8 *Mfg,__u8 *Id,unsigned Count, - unsigned long base,struct jedec_private *priv) -{ - unsigned I,J; - unsigned long Size; - unsigned long SectorSize; - const struct JEDECTable *JEDEC; - - // Test #2 JEDEC numbers exhibit odd parity - for (I = 0; I != Count; I++) - { - if (checkparity(Mfg[I]) == 0 || checkparity(Id[I]) == 0) - return 0; - } - - // Finally, just make sure all the chip sizes are the same - JEDEC = jedec_idtoinf(Mfg[0],Id[0]); - - if (JEDEC == 0) - { - printk("mtd: Found JEDEC flash chip, but do not have a table entry for %x:%x\n",Mfg[0],Mfg[1]); - return 0; - } - - Size = JEDEC->size; - SectorSize = JEDEC->sectorsize; - for (I = 0; I != Count; I++) - { - JEDEC = jedec_idtoinf(Mfg[0],Id[0]); - if (JEDEC == 0) - { - printk("mtd: Found JEDEC flash chip, but do not have a table entry for %x:%x\n",Mfg[0],Mfg[1]); - return 0; - } - - if (Size != JEDEC->size || SectorSize != JEDEC->sectorsize) - { - printk("mtd: Failed. Interleved flash does not have matching characteristics\n"); - return 0; - } - } - - // Load the Chips - for (I = 0; I != MAX_JEDEC_CHIPS; I++) - { - if (priv->chips[I].jedec == 0) - break; - } - - if (I + Count > MAX_JEDEC_CHIPS) - { - printk("mtd: Device has too many chips. Increase MAX_JEDEC_CHIPS\n"); - return 0; - } - - // Add them to the table - for (J = 0; J != Count; J++) - { - unsigned long Bank; - - JEDEC = jedec_idtoinf(Mfg[J],Id[J]); - priv->chips[I].jedec = (Mfg[J] << 8) | Id[J]; - priv->chips[I].size = JEDEC->size; - priv->chips[I].sectorsize = JEDEC->sectorsize; - priv->chips[I].base = base + J; - priv->chips[I].datashift = J*8; - priv->chips[I].capabilities = JEDEC->capabilities; - priv->chips[I].offset = priv->size + J; - - // log2 n :| - priv->chips[I].addrshift = 0; - for (Bank = Count; Bank != 1; Bank >>= 1, priv->chips[I].addrshift++); - - // Determine how filled this bank is. - Bank = base & (~(my_bank_size-1)); - if (priv->bank_fill[Bank/my_bank_size] < base + - (JEDEC->size << priv->chips[I].addrshift) - Bank) - priv->bank_fill[Bank/my_bank_size] = base + (JEDEC->size << priv->chips[I].addrshift) - Bank; - I++; - } - - priv->size += priv->chips[I-1].size*Count; - - return priv->chips[I-1].size; -} - -/* Lookup the chip information from the JEDEC ID table. */ -static const struct JEDECTable *jedec_idtoinf(__u8 mfr,__u8 id) -{ - __u16 Id = (mfr << 8) | id; - unsigned long I = 0; - for (I = 0; JEDEC_table[I].jedec != 0; I++) - if (JEDEC_table[I].jedec == Id) - return JEDEC_table + I; - return NULL; -} - -// Look for flash using an 8 bit bus interface -static int jedec_probe8(struct map_info *map,unsigned long base, - struct jedec_private *priv) -{ - #define flread(x) map_read8(map,base+x) - #define flwrite(v,x) map_write8(map,v,base+x) - - const unsigned long AutoSel1 = 0xAA; - const unsigned long AutoSel2 = 0x55; - const unsigned long AutoSel3 = 0x90; - const unsigned long Reset = 0xF0; - __u32 OldVal; - __u8 Mfg[1]; - __u8 Id[1]; - unsigned I; - unsigned long Size; - - // Wait for any write/erase operation to settle - OldVal = flread(base); - for (I = 0; OldVal != flread(base) && I < 10000; I++) - OldVal = flread(base); - - // Reset the chip - flwrite(Reset,0x555); - - // Send the sequence - flwrite(AutoSel1,0x555); - flwrite(AutoSel2,0x2AA); - flwrite(AutoSel3,0x555); - - // Get the JEDEC numbers - Mfg[0] = flread(0); - Id[0] = flread(1); - // printk("Mfg is %x, Id is %x\n",Mfg[0],Id[0]); - - Size = handle_jedecs(map,Mfg,Id,1,base,priv); - // printk("handle_jedecs Size is %x\n",(unsigned int)Size); - if (Size == 0) - { - flwrite(Reset,0x555); - return 0; - } - - - // Reset. - flwrite(Reset,0x555); - - return 1; - - #undef flread - #undef flwrite -} - -// Look for flash using a 16 bit bus interface (ie 2 8-bit chips) -static int jedec_probe16(struct map_info *map,unsigned long base, - struct jedec_private *priv) -{ - return 0; -} - -// Look for flash using a 32 bit bus interface (ie 4 8-bit chips) -static int jedec_probe32(struct map_info *map,unsigned long base, - struct jedec_private *priv) -{ - #define flread(x) map_read32(map,base+((x)<<2)) - #define flwrite(v,x) map_write32(map,v,base+((x)<<2)) - - const unsigned long AutoSel1 = 0xAAAAAAAA; - const unsigned long AutoSel2 = 0x55555555; - const unsigned long AutoSel3 = 0x90909090; - const unsigned long Reset = 0xF0F0F0F0; - __u32 OldVal; - __u8 Mfg[4]; - __u8 Id[4]; - unsigned I; - unsigned long Size; - - // Wait for any write/erase operation to settle - OldVal = flread(base); - for (I = 0; OldVal != flread(base) && I < 10000; I++) - OldVal = flread(base); - - // Reset the chip - flwrite(Reset,0x555); - - // Send the sequence - flwrite(AutoSel1,0x555); - flwrite(AutoSel2,0x2AA); - flwrite(AutoSel3,0x555); - - // Test #1, JEDEC numbers are readable from 0x??00/0x??01 - if (flread(0) != flread(0x100) || - flread(1) != flread(0x101)) - { - flwrite(Reset,0x555); - return 0; - } - - // Split up the JEDEC numbers - OldVal = flread(0); - for (I = 0; I != 4; I++) - Mfg[I] = (OldVal >> (I*8)); - OldVal = flread(1); - for (I = 0; I != 4; I++) - Id[I] = (OldVal >> (I*8)); - - Size = handle_jedecs(map,Mfg,Id,4,base,priv); - if (Size == 0) - { - flwrite(Reset,0x555); - return 0; - } - - /* Check if there is address wrap around within a single bank, if this - returns JEDEC numbers then we assume that it is wrap around. Notice - we call this routine with the JEDEC return still enabled, if two or - more flashes have a truncated address space the probe test will still - work */ - if (base + (Size<<2)+0x555 < map->size && - base + (Size<<2)+0x555 < (base & (~(my_bank_size-1))) + my_bank_size) - { - if (flread(base+Size) != flread(base+Size + 0x100) || - flread(base+Size + 1) != flread(base+Size + 0x101)) - { - jedec_probe32(map,base+Size,priv); - } - } - - // Reset. - flwrite(0xF0F0F0F0,0x555); - - return 1; - - #undef flread - #undef flwrite -} - -/* Linear read. */ -static int jedec_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - struct map_info *map = mtd->priv; - - map_copy_from(map, buf, from, len); - *retlen = len; - return 0; -} - -/* Banked read. Take special care to jump past the holes in the bank - mapping. This version assumes symetry in the holes.. */ -static int jedec_read_banked(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - struct map_info *map = mtd->priv; - struct jedec_private *priv = map->fldrv_priv; - - *retlen = 0; - while (len > 0) - { - // Determine what bank and offset into that bank the first byte is - unsigned long bank = from & (~(priv->bank_fill[0]-1)); - unsigned long offset = from & (priv->bank_fill[0]-1); - unsigned long get = len; - if (priv->bank_fill[0] - offset < len) - get = priv->bank_fill[0] - offset; - - bank /= priv->bank_fill[0]; - map_copy_from(map,buf + *retlen,bank*my_bank_size + offset,get); - - len -= get; - *retlen += get; - from += get; - } - return 0; -} - -/* Pass the flags value that the flash return before it re-entered read - mode. */ -static void jedec_flash_failed(unsigned char code) -{ - /* Bit 5 being high indicates that there was an internal device - failure, erasure time limits exceeded or something */ - if ((code & (1 << 5)) != 0) - { - printk("mtd: Internal Flash failure\n"); - return; - } - printk("mtd: Programming didn't take\n"); -} - -/* This uses the erasure function described in the AMD Flash Handbook, - it will work for flashes with a fixed sector size only. Flashes with - a selection of sector sizes (ie the AMD Am29F800B) will need a different - routine. This routine tries to parallize erasing multiple chips/sectors - where possible */ -static int flash_erase(struct mtd_info *mtd, struct erase_info *instr) -{ - // Does IO to the currently selected chip - #define flread(x) map_read8(map,chip->base+((x)<<chip->addrshift)) - #define flwrite(v,x) map_write8(map,v,chip->base+((x)<<chip->addrshift)) - - unsigned long Time = 0; - unsigned long NoTime = 0; - unsigned long start = instr->addr, len = instr->len; - unsigned int I; - struct map_info *map = mtd->priv; - struct jedec_private *priv = map->fldrv_priv; - - // Verify the arguments.. - if (start + len > mtd->size || - (start % mtd->erasesize) != 0 || - (len % mtd->erasesize) != 0 || - (len/mtd->erasesize) == 0) - return -EINVAL; - - jedec_flash_chip_scan(priv,start,len); - - // Start the erase sequence on each chip - for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++) - { - unsigned long off; - struct jedec_flash_chip *chip = priv->chips + I; - - if (chip->length == 0) - continue; - - if (chip->start + chip->length > chip->size) - { - printk("DIE\n"); - return -EIO; - } - - flwrite(0xF0,chip->start + 0x555); - flwrite(0xAA,chip->start + 0x555); - flwrite(0x55,chip->start + 0x2AA); - flwrite(0x80,chip->start + 0x555); - flwrite(0xAA,chip->start + 0x555); - flwrite(0x55,chip->start + 0x2AA); - - /* Once we start selecting the erase sectors the delay between each - command must not exceed 50us or it will immediately start erasing - and ignore the other sectors */ - for (off = 0; off < len; off += chip->sectorsize) - { - // Check to make sure we didn't timeout - flwrite(0x30,chip->start + off); - if (off == 0) - continue; - if ((flread(chip->start + off) & (1 << 3)) != 0) - { - printk("mtd: Ack! We timed out the erase timer!\n"); - return -EIO; - } - } - } - - /* We could split this into a timer routine and return early, performing - background erasure.. Maybe later if the need warrents */ - - /* Poll the flash for erasure completion, specs say this can take as long - as 480 seconds to do all the sectors (for a 2 meg flash). - Erasure time is dependent on chip age, temp and wear.. */ - - /* This being a generic routine assumes a 32 bit bus. It does read32s - and bundles interleved chips into the same grouping. This will work - for all bus widths */ - Time = 0; - NoTime = 0; - for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++) - { - struct jedec_flash_chip *chip = priv->chips + I; - unsigned long off = 0; - unsigned todo[4] = {0,0,0,0}; - unsigned todo_left = 0; - unsigned J; - - if (chip->length == 0) - continue; - - /* Find all chips in this data line, realistically this is all - or nothing up to the interleve count */ - for (J = 0; priv->chips[J].jedec != 0 && J < MAX_JEDEC_CHIPS; J++) - { - if ((priv->chips[J].base & (~((1<<chip->addrshift)-1))) == - (chip->base & (~((1<<chip->addrshift)-1)))) - { - todo_left++; - todo[priv->chips[J].base & ((1<<chip->addrshift)-1)] = 1; - } - } - - /* printk("todo: %x %x %x %x\n",(short)todo[0],(short)todo[1], - (short)todo[2],(short)todo[3]); - */ - while (1) - { - __u32 Last[4]; - unsigned long Count = 0; - - /* During erase bit 7 is held low and bit 6 toggles, we watch this, - should it stop toggling or go high then the erase is completed, - or this is not really flash ;> */ - switch (map->buswidth) { - case 1: - Last[0] = map_read8(map,(chip->base >> chip->addrshift) + chip->start + off); - Last[1] = map_read8(map,(chip->base >> chip->addrshift) + chip->start + off); - Last[2] = map_read8(map,(chip->base >> chip->addrshift) + chip->start + off); - break; - case 2: - Last[0] = map_read16(map,(chip->base >> chip->addrshift) + chip->start + off); - Last[1] = map_read16(map,(chip->base >> chip->addrshift) + chip->start + off); - Last[2] = map_read16(map,(chip->base >> chip->addrshift) + chip->start + off); - break; - case 3: - Last[0] = map_read32(map,(chip->base >> chip->addrshift) + chip->start + off); - Last[1] = map_read32(map,(chip->base >> chip->addrshift) + chip->start + off); - Last[2] = map_read32(map,(chip->base >> chip->addrshift) + chip->start + off); - break; - } - Count = 3; - while (todo_left != 0) - { - for (J = 0; J != 4; J++) - { - __u8 Byte1 = (Last[(Count-1)%4] >> (J*8)) & 0xFF; - __u8 Byte2 = (Last[(Count-2)%4] >> (J*8)) & 0xFF; - __u8 Byte3 = (Last[(Count-3)%4] >> (J*8)) & 0xFF; - if (todo[J] == 0) - continue; - - if ((Byte1 & (1 << 7)) == 0 && Byte1 != Byte2) - { -// printk("Check %x %x %x\n",(short)J,(short)Byte1,(short)Byte2); - continue; - } - - if (Byte1 == Byte2) - { - jedec_flash_failed(Byte3); - return -EIO; - } - - todo[J] = 0; - todo_left--; - } - -/* if (NoTime == 0) - Time += HZ/10 - schedule_timeout(HZ/10);*/ - NoTime = 0; - - switch (map->buswidth) { - case 1: - Last[Count % 4] = map_read8(map,(chip->base >> chip->addrshift) + chip->start + off); - break; - case 2: - Last[Count % 4] = map_read16(map,(chip->base >> chip->addrshift) + chip->start + off); - break; - case 4: - Last[Count % 4] = map_read32(map,(chip->base >> chip->addrshift) + chip->start + off); - break; - } - Count++; - -/* // Count time, max of 15s per sector (according to AMD) - if (Time > 15*len/mtd->erasesize*HZ) - { - printk("mtd: Flash Erase Timed out\n"); - return -EIO; - } */ - } - - // Skip to the next chip if we used chip erase - if (chip->length == chip->size) - off = chip->size; - else - off += chip->sectorsize; - - if (off >= chip->length) - break; - NoTime = 1; - } - - for (J = 0; priv->chips[J].jedec != 0 && J < MAX_JEDEC_CHIPS; J++) - { - if ((priv->chips[J].base & (~((1<<chip->addrshift)-1))) == - (chip->base & (~((1<<chip->addrshift)-1)))) - priv->chips[J].length = 0; - } - } - - //printk("done\n"); - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return 0; - - #undef flread - #undef flwrite -} - -/* This is the simple flash writing function. It writes to every byte, in - sequence. It takes care of how to properly address the flash if - the flash is interleved. It can only be used if all the chips in the - array are identical!*/ -static int flash_write(struct mtd_info *mtd, loff_t start, size_t len, - size_t *retlen, const u_char *buf) -{ - /* Does IO to the currently selected chip. It takes the bank addressing - base (which is divisible by the chip size) adds the necessary lower bits - of addrshift (interleave index) and then adds the control register index. */ - #define flread(x) map_read8(map,base+(off&((1<<chip->addrshift)-1))+((x)<<chip->addrshift)) - #define flwrite(v,x) map_write8(map,v,base+(off&((1<<chip->addrshift)-1))+((x)<<chip->addrshift)) - - struct map_info *map = mtd->priv; - struct jedec_private *priv = map->fldrv_priv; - unsigned long base; - unsigned long off; - size_t save_len = len; - - if (start + len > mtd->size) - return -EIO; - - //printk("Here"); - - //printk("flash_write: start is %x, len is %x\n",start,(unsigned long)len); - while (len != 0) - { - struct jedec_flash_chip *chip = priv->chips; - unsigned long bank; - unsigned long boffset; - - // Compute the base of the flash. - off = ((unsigned long)start) % (chip->size << chip->addrshift); - base = start - off; - - // Perform banked addressing translation. - bank = base & (~(priv->bank_fill[0]-1)); - boffset = base & (priv->bank_fill[0]-1); - bank = (bank/priv->bank_fill[0])*my_bank_size; - base = bank + boffset; - - // printk("Flasing %X %X %X\n",base,chip->size,len); - // printk("off is %x, compare with %x\n",off,chip->size << chip->addrshift); - - // Loop over this page - for (; off != (chip->size << chip->addrshift) && len != 0; start++, len--, off++,buf++) - { - unsigned char oldbyte = map_read8(map,base+off); - unsigned char Last[4]; - unsigned long Count = 0; - - if (oldbyte == *buf) { - // printk("oldbyte and *buf is %x,len is %x\n",oldbyte,len); - continue; - } - if (((~oldbyte) & *buf) != 0) - printk("mtd: warn: Trying to set a 0 to a 1\n"); - - // Write - flwrite(0xAA,0x555); - flwrite(0x55,0x2AA); - flwrite(0xA0,0x555); - map_write8(map,*buf,base + off); - Last[0] = map_read8(map,base + off); - Last[1] = map_read8(map,base + off); - Last[2] = map_read8(map,base + off); - - /* Wait for the flash to finish the operation. We store the last 4 - status bytes that have been retrieved so we can determine why - it failed. The toggle bits keep toggling when there is a - failure */ - for (Count = 3; Last[(Count - 1) % 4] != Last[(Count - 2) % 4] && - Count < 10000; Count++) - Last[Count % 4] = map_read8(map,base + off); - if (Last[(Count - 1) % 4] != *buf) - { - jedec_flash_failed(Last[(Count - 3) % 4]); - return -EIO; - } - } - } - *retlen = save_len; - return 0; -} - -/* This is used to enhance the speed of the erase routine, - when things are being done to multiple chips it is possible to - parallize the operations, particularly full memory erases of multi - chip memories benifit */ -static void jedec_flash_chip_scan(struct jedec_private *priv,unsigned long start, - unsigned long len) -{ - unsigned int I; - - // Zero the records - for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++) - priv->chips[I].start = priv->chips[I].length = 0; - - // Intersect the region with each chip - for (I = 0; priv->chips[I].jedec != 0 && I < MAX_JEDEC_CHIPS; I++) - { - struct jedec_flash_chip *chip = priv->chips + I; - unsigned long ByteStart; - unsigned long ChipEndByte = chip->offset + (chip->size << chip->addrshift); - - // End is before this chip or the start is after it - if (start+len < chip->offset || - ChipEndByte - (1 << chip->addrshift) < start) - continue; - - if (start < chip->offset) - { - ByteStart = chip->offset; - chip->start = 0; - } - else - { - chip->start = (start - chip->offset + (1 << chip->addrshift)-1) >> chip->addrshift; - ByteStart = start; - } - - if (start + len >= ChipEndByte) - chip->length = (ChipEndByte - ByteStart) >> chip->addrshift; - else - chip->length = (start + len - ByteStart + (1 << chip->addrshift)-1) >> chip->addrshift; - } -} - -int __init jedec_init(void) -{ - register_mtd_chip_driver(&jedec_chipdrv); - return 0; -} - -static void __exit jedec_exit(void) -{ - unregister_mtd_chip_driver(&jedec_chipdrv); -} - -module_init(jedec_init); -module_exit(jedec_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jason Gunthorpe <jgg@deltatee.com> et al."); -MODULE_DESCRIPTION("Old MTD chip driver for JEDEC-compliant flash chips"); |