1 files changed, 124 insertions, 0 deletions
diff --git a/drivers/mxc/vpu/mxc_vl2cc.c b/drivers/mxc/vpu/mxc_vl2cc.c
new file mode 100644
index 000000000000..c077ac1c2639
--- /dev/null
+++ b/drivers/mxc/vpu/mxc_vl2cc.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright 2007-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*!
+ * @file mxc_vl2cc.c
+ *
+ * @brief VL2CC initialization and flush operation implementation
+ *
+ * @ingroup VL2CC
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#define VL2CC_CTRL_OFFSET	(0x100)
+#define VL2CC_AUXCTRL_OFFSET	(0x104)
+#define VL2CC_INVWAY_OFFSET	(0x77C)
+#define VL2CC_CLEANWAY_OFFSET	(0x7BC)
+
+/*! VL2CC clock handle. */
+static struct clk *vl2cc_clk;
+static u32 *vl2cc_base;
+
+/*!
+ * Initialization function of VL2CC. Remap the VL2CC base address.
+ *
+ * @return status  0 success.
+ */
+int vl2cc_init(u32 vl2cc_hw_base)
+{
+	vl2cc_base = ioremap(vl2cc_hw_base, SZ_8K - 1);
+	if (vl2cc_base == NULL) {
+		printk(KERN_INFO "vl2cc: Unable to ioremap\n");
+		return -ENOMEM;
+	}
+
+	vl2cc_clk = clk_get(NULL, "vl2cc_clk");
+	if (IS_ERR(vl2cc_clk)) {
+		printk(KERN_INFO "vl2cc: Unable to get clock\n");
+		iounmap(vl2cc_base);
+		return -EIO;
+	}
+
+	printk(KERN_INFO "VL2CC initialized\n");
+	return 0;
+}
+
+/*!
+ * Enable VL2CC hardware
+ */
+void vl2cc_enable(void)
+{
+	volatile u32 reg;
+
+	clk_enable(vl2cc_clk);
+
+	/* Disable VL2CC */
+	reg = __raw_readl(vl2cc_base + VL2CC_CTRL_OFFSET);
+	reg &= 0xFFFFFFFE;
+	__raw_writel(reg, vl2cc_base + VL2CC_CTRL_OFFSET);
+
+	/* Set the latency for data RAM reads, data RAM writes, tag RAM and
+	 * dirty RAM to 1 cycle - write 0x0 to AUX CTRL [11:0] and also
+	 * configure the number of ways to 8 - write 8 to AUX CTRL [16:13]
+	 */
+	reg = __raw_readl(vl2cc_base + VL2CC_AUXCTRL_OFFSET);
+	reg &= 0xFFFE1000;	/* Clear [16:13] too */
+	reg |= (0x8 << 13);	/* [16:13] = 8; */
+	__raw_writel(reg, vl2cc_base + VL2CC_AUXCTRL_OFFSET);
+
+	/* Invalidate the VL2CC ways - write 0xff to INV BY WAY and poll the
+	 * register until its value is 0x0
+	 */
+	__raw_writel(0xff, vl2cc_base + VL2CC_INVWAY_OFFSET);
+	while (__raw_readl(vl2cc_base + VL2CC_INVWAY_OFFSET) != 0x0)
+		;
+
+	/* Enable VL2CC */
+	reg = __raw_readl(vl2cc_base + VL2CC_CTRL_OFFSET);
+	reg |= 0x1;
+	__raw_writel(reg, vl2cc_base + VL2CC_CTRL_OFFSET);
+}
+
+/*!
+ * Flush VL2CC
+ */
+void vl2cc_flush(void)
+{
+	__raw_writel(0xff, vl2cc_base + VL2CC_CLEANWAY_OFFSET);
+	while (__raw_readl(vl2cc_base + VL2CC_CLEANWAY_OFFSET) != 0x0)
+		;
+}
+
+/*!
+ * Disable VL2CC
+ */
+void vl2cc_disable(void)
+{
+	__raw_writel(0, vl2cc_base + VL2CC_CTRL_OFFSET);
+	clk_disable(vl2cc_clk);
+}
+
+/*!
+ * Cleanup VL2CC
+ */
+void vl2cc_cleanup(void)
+{
+	clk_put(vl2cc_clk);
+	iounmap(vl2cc_base);
+}