summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x/bnx2x_link.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.h')
-rw-r--r--drivers/net/bnx2x/bnx2x_link.h34
1 files changed, 21 insertions, 13 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
index bedab1a942c4..92f36b6950dc 100644
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/bnx2x/bnx2x_link.h
@@ -1,4 +1,4 @@
-/* Copyright 2008-2010 Broadcom Corporation
+/* Copyright 2008-2011 Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
@@ -33,7 +33,7 @@
#define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
#define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
-#define SPEED_AUTO_NEG 0
+#define SPEED_AUTO_NEG 0
#define SPEED_12000 12000
#define SPEED_12500 12500
#define SPEED_13000 13000
@@ -44,8 +44,8 @@
#define SFP_EEPROM_VENDOR_NAME_SIZE 16
#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25
#define SFP_EEPROM_VENDOR_OUI_SIZE 3
-#define SFP_EEPROM_PART_NO_ADDR 0x28
-#define SFP_EEPROM_PART_NO_SIZE 16
+#define SFP_EEPROM_PART_NO_ADDR 0x28
+#define SFP_EEPROM_PART_NO_SIZE 16
#define PWR_FLT_ERR_MSG_LEN 250
#define XGXS_EXT_PHY_TYPE(ext_phy_config) \
@@ -62,7 +62,7 @@
#define SINGLE_MEDIA(params) (params->num_phys == 2)
/* Dual Media board contains two external phy with different media */
#define DUAL_MEDIA(params) (params->num_phys == 3)
-#define FW_PARAM_MDIO_CTRL_OFFSET 16
+#define FW_PARAM_MDIO_CTRL_OFFSET 16
#define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \
(phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET)
@@ -201,12 +201,14 @@ struct link_params {
/* Default / User Configuration */
u8 loopback_mode;
-#define LOOPBACK_NONE 0
-#define LOOPBACK_EMAC 1
-#define LOOPBACK_BMAC 2
+#define LOOPBACK_NONE 0
+#define LOOPBACK_EMAC 1
+#define LOOPBACK_BMAC 2
#define LOOPBACK_XGXS 3
#define LOOPBACK_EXT_PHY 4
-#define LOOPBACK_EXT 5
+#define LOOPBACK_EXT 5
+#define LOOPBACK_UMAC 6
+#define LOOPBACK_XMAC 7
/* Device parameters */
u8 mac_addr[6];
@@ -230,10 +232,11 @@ struct link_params {
/* Phy register parameter */
u32 chip_id;
+ /* features */
u32 feature_config_flags;
-#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
-#define FEATURE_CONFIG_PFC_ENABLED (1<<1)
-#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
+#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
+#define FEATURE_CONFIG_PFC_ENABLED (1<<1)
+#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
#define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3)
/* Will be populated during common init */
struct bnx2x_phy phy[MAX_PHYS];
@@ -334,6 +337,11 @@ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
/* Reset the external of SFX7101 */
void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy);
+/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */
+u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
+ struct link_params *params, u16 addr,
+ u8 byte_cnt, u8 *o_buf);
+
void bnx2x_hw_reset_phy(struct link_params *params);
/* Checks if HW lock is required for this phy/board type */
@@ -379,7 +387,7 @@ void bnx2x_ets_disabled(struct link_params *params);
/* Used to configure the ETS to BW limited */
void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
- const u32 cos1_bw);
+ const u32 cos1_bw);
/* Used to configure the ETS to strict */
u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);