diff options
Diffstat (limited to 'drivers/net/dsa/sja1105/sja1105_main.c')
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 72 |
1 files changed, 65 insertions, 7 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 3b51e87a3714..eab861352bf2 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -178,6 +178,7 @@ static int sja1105_init_mii_settings(struct sja1105_private *priv, default: dev_err(dev, "Unsupported PHY mode %s!\n", phy_modes(ports[i].phy_mode)); + return -EINVAL; } mii->phy_mac[i] = ports[i].role; @@ -991,10 +992,11 @@ static int sja1105et_is_fdb_entry_in_bin(struct sja1105_private *priv, int bin, int sja1105et_fdb_add(struct dsa_switch *ds, int port, const unsigned char *addr, u16 vid) { - struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_l2_lookup_entry l2_lookup = {0}, tmp; struct sja1105_private *priv = ds->priv; struct device *dev = ds->dev; int last_unused = -1; + int start, end, i; int bin, way, rc; bin = sja1105et_fdb_hash(priv, addr, vid); @@ -1006,7 +1008,7 @@ int sja1105et_fdb_add(struct dsa_switch *ds, int port, * mask? If yes, we need to do nothing. If not, we need * to rewrite the entry by adding this port to it. */ - if (l2_lookup.destports & BIT(port)) + if ((l2_lookup.destports & BIT(port)) && l2_lookup.lockeds) return 0; l2_lookup.destports |= BIT(port); } else { @@ -1037,6 +1039,7 @@ int sja1105et_fdb_add(struct dsa_switch *ds, int port, index, NULL, false); } } + l2_lookup.lockeds = true; l2_lookup.index = sja1105et_fdb_index(bin, way); rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, @@ -1045,6 +1048,29 @@ int sja1105et_fdb_add(struct dsa_switch *ds, int port, if (rc < 0) return rc; + /* Invalidate a dynamically learned entry if that exists */ + start = sja1105et_fdb_index(bin, 0); + end = sja1105et_fdb_index(bin, way); + + for (i = start; i < end; i++) { + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + i, &tmp); + if (rc == -ENOENT) + continue; + if (rc) + return rc; + + if (tmp.macaddr != ether_addr_to_u64(addr) || tmp.vlanid != vid) + continue; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + i, NULL, false); + if (rc) + return rc; + + break; + } + return sja1105_static_fdb_change(priv, port, &l2_lookup, true); } @@ -1086,7 +1112,7 @@ int sja1105et_fdb_del(struct dsa_switch *ds, int port, int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, const unsigned char *addr, u16 vid) { - struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_l2_lookup_entry l2_lookup = {0}, tmp; struct sja1105_private *priv = ds->priv; int rc, i; @@ -1107,10 +1133,10 @@ int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, SJA1105_SEARCH, &l2_lookup); if (rc == 0) { - /* Found and this port is already in the entry's + /* Found a static entry and this port is already in the entry's * port mask => job done */ - if (l2_lookup.destports & BIT(port)) + if ((l2_lookup.destports & BIT(port)) && l2_lookup.lockeds) return 0; /* l2_lookup.index is populated by the switch in case it * found something. @@ -1133,16 +1159,46 @@ int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, dev_err(ds->dev, "FDB is full, cannot add entry.\n"); return -EINVAL; } - l2_lookup.lockeds = true; l2_lookup.index = i; skip_finding_an_index: + l2_lookup.lockeds = true; + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, l2_lookup.index, &l2_lookup, true); if (rc < 0) return rc; + /* The switch learns dynamic entries and looks up the FDB left to + * right. It is possible that our addition was concurrent with the + * dynamic learning of the same address, so now that the static entry + * has been installed, we are certain that address learning for this + * particular address has been turned off, so the dynamic entry either + * is in the FDB at an index smaller than the static one, or isn't (it + * can also be at a larger index, but in that case it is inactive + * because the static FDB entry will match first, and the dynamic one + * will eventually age out). Search for a dynamically learned address + * prior to our static one and invalidate it. + */ + tmp = l2_lookup; + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + SJA1105_SEARCH, &tmp); + if (rc < 0) { + dev_err(ds->dev, + "port %d failed to read back entry for %pM vid %d: %pe\n", + port, addr, vid, ERR_PTR(rc)); + return rc; + } + + if (tmp.index < l2_lookup.index) { + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + tmp.index, NULL, false); + if (rc < 0) + return rc; + } + return sja1105_static_fdb_change(priv, port, &l2_lookup, true); } @@ -1256,7 +1312,9 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port, /* We need to hide the dsa_8021q VLANs from the user. */ if (!dsa_port_is_vlan_filtering(&ds->ports[port])) l2_lookup.vlanid = 0; - cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data); + rc = cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data); + if (rc) + return rc; } return 0; } |