summaryrefslogtreecommitdiff
path: root/drivers/net/e1000e/ethtool.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/ethtool.c')
-rw-r--r--drivers/net/e1000e/ethtool.c154
1 files changed, 81 insertions, 73 deletions
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 07f09e96e453..859d0d3af6c9 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -122,6 +122,7 @@ static int e1000_get_settings(struct net_device *netdev,
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ u32 speed;
if (hw->phy.media_type == e1000_media_type_copper) {
@@ -159,23 +160,23 @@ static int e1000_get_settings(struct net_device *netdev,
ecmd->transceiver = XCVR_EXTERNAL;
}
- ecmd->speed = -1;
+ speed = -1;
ecmd->duplex = -1;
if (netif_running(netdev)) {
if (netif_carrier_ok(netdev)) {
- ecmd->speed = adapter->link_speed;
+ speed = adapter->link_speed;
ecmd->duplex = adapter->link_duplex - 1;
}
} else {
u32 status = er32(STATUS);
if (status & E1000_STATUS_LU) {
if (status & E1000_STATUS_SPEED_1000)
- ecmd->speed = 1000;
+ speed = SPEED_1000;
else if (status & E1000_STATUS_SPEED_100)
- ecmd->speed = 100;
+ speed = SPEED_100;
else
- ecmd->speed = 10;
+ speed = SPEED_10;
if (status & E1000_STATUS_FD)
ecmd->duplex = DUPLEX_FULL;
@@ -184,6 +185,7 @@ static int e1000_get_settings(struct net_device *netdev,
}
}
+ ethtool_cmd_speed_set(ecmd, speed);
ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
@@ -198,20 +200,25 @@ static int e1000_get_settings(struct net_device *netdev,
return 0;
}
-static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
{
struct e1000_mac_info *mac = &adapter->hw.mac;
mac->autoneg = 0;
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- e_err("Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL) {
+ goto err_inval;
}
- switch (spddplx) {
+ switch (spd + dplx) {
case SPEED_10 + DUPLEX_HALF:
mac->forced_speed_duplex = ADVERTISE_10_HALF;
break;
@@ -230,10 +237,13 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- e_err("Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
+ goto err_inval;
}
return 0;
+
+err_inval:
+ e_err("Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
}
static int e1000_set_settings(struct net_device *netdev,
@@ -253,7 +263,7 @@ static int e1000_set_settings(struct net_device *netdev,
}
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
@@ -269,7 +279,8 @@ static int e1000_set_settings(struct net_device *netdev,
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
} else {
- if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->state);
return -EINVAL;
}
@@ -317,7 +328,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
adapter->fc_autoneg = pause->autoneg;
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
hw->fc.requested_mode = e1000_fc_default;
@@ -673,7 +684,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
return -EINVAL;
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
if (netif_running(adapter->netdev))
e1000e_down(adapter);
@@ -952,7 +963,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
- msleep(10);
+ usleep_range(10000, 20000);
/* Test each interrupt */
for (i = 0; i < 10; i++) {
@@ -984,7 +995,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMC, mask);
ew32(ICS, mask);
- msleep(10);
+ usleep_range(10000, 20000);
if (adapter->test_icr & mask) {
*data = 3;
@@ -1002,7 +1013,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMS, mask);
ew32(ICS, mask);
- msleep(10);
+ usleep_range(10000, 20000);
if (!(adapter->test_icr & mask)) {
*data = 4;
@@ -1020,7 +1031,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMC, ~mask & 0x00007FFF);
ew32(ICS, ~mask & 0x00007FFF);
- msleep(10);
+ usleep_range(10000, 20000);
if (adapter->test_icr) {
*data = 5;
@@ -1031,7 +1042,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
- msleep(10);
+ usleep_range(10000, 20000);
/* Unhook test interrupt handler */
free_irq(irq, netdev);
@@ -1406,7 +1417,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
*/
#define E1000_SERDES_LB_ON 0x410
ew32(SCTL, E1000_SERDES_LB_ON);
- msleep(10);
+ usleep_range(10000, 20000);
return 0;
}
@@ -1501,7 +1512,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
hw->phy.media_type == e1000_media_type_internal_serdes) {
#define E1000_SERDES_LB_OFF 0x400
ew32(SCTL, E1000_SERDES_LB_OFF);
- msleep(10);
+ usleep_range(10000, 20000);
break;
}
/* Fall Through */
@@ -1851,64 +1862,35 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
return 0;
}
-/* toggle LED 4 times per second = 2 "blinks" per second */
-#define E1000_ID_INTERVAL (HZ/4)
-
-/* bit defines for adapter->led_status */
-#define E1000_LED_ON 0
-
-void e1000e_led_blink_task(struct work_struct *work)
-{
- struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, led_blink_task);
-
- if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
- adapter->hw.mac.ops.led_off(&adapter->hw);
- else
- adapter->hw.mac.ops.led_on(&adapter->hw);
-}
-
-static void e1000_led_blink_callback(unsigned long data)
-{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
- schedule_work(&adapter->led_blink_task);
- mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
-}
-
-static int e1000_phys_id(struct net_device *netdev, u32 data)
+static int e1000_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- if (!data)
- data = INT_MAX;
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ if (!hw->mac.ops.blink_led)
+ return 2; /* cycle on/off twice per second */
- if ((hw->phy.type == e1000_phy_ife) ||
- (hw->mac.type == e1000_pchlan) ||
- (hw->mac.type == e1000_pch2lan) ||
- (hw->mac.type == e1000_82583) ||
- (hw->mac.type == e1000_82574)) {
- if (!adapter->blink_timer.function) {
- init_timer(&adapter->blink_timer);
- adapter->blink_timer.function =
- e1000_led_blink_callback;
- adapter->blink_timer.data = (unsigned long) adapter;
- }
- mod_timer(&adapter->blink_timer, jiffies);
- msleep_interruptible(data * 1000);
- del_timer_sync(&adapter->blink_timer);
+ hw->mac.ops.blink_led(hw);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
if (hw->phy.type == e1000_phy_ife)
e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
- } else {
- e1000e_blink_led(hw);
- msleep_interruptible(data * 1000);
- }
+ hw->mac.ops.led_off(hw);
+ hw->mac.ops.cleanup_led(hw);
+ break;
- hw->mac.ops.led_off(hw);
- clear_bit(E1000_LED_ON, &adapter->led_status);
- hw->mac.ops.cleanup_led(hw);
+ case ETHTOOL_ID_ON:
+ adapter->hw.mac.ops.led_on(&adapter->hw);
+ break;
+ case ETHTOOL_ID_OFF:
+ adapter->hw.mac.ops.led_off(&adapter->hw);
+ break;
+ }
return 0;
}
@@ -2020,6 +2002,31 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
}
}
+static int e1000e_set_flags(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ bool need_reset = false;
+ int rc;
+
+ need_reset = (data & ETH_FLAG_RXVLAN) !=
+ (netdev->features & NETIF_F_HW_VLAN_RX);
+
+ rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
+ ETH_FLAG_TXVLAN);
+
+ if (rc)
+ return rc;
+
+ if (need_reset) {
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+ }
+
+ return 0;
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
@@ -2049,12 +2056,13 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.set_tso = e1000_set_tso,
.self_test = e1000_diag_test,
.get_strings = e1000_get_strings,
- .phys_id = e1000_phys_id,
+ .set_phys_id = e1000_set_phys_id,
.get_ethtool_stats = e1000_get_ethtool_stats,
.get_sset_count = e1000e_get_sset_count,
.get_coalesce = e1000_get_coalesce,
.set_coalesce = e1000_set_coalesce,
.get_flags = ethtool_op_get_flags,
+ .set_flags = e1000e_set_flags,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)