summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2.c')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2.c37
1 files changed, 33 insertions, 4 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index cda25ac45b47..6c9e1c9bdeb8 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -2507,6 +2507,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent)
bp->fw_wr_seq++;
msg_data |= bp->fw_wr_seq;
+ bp->fw_last_msg = msg_data;
bnx2_shmem_wr(bp, BNX2_DRV_MB, msg_data);
@@ -4000,8 +4001,23 @@ bnx2_setup_wol(struct bnx2 *bp)
wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
}
- if (!(bp->flags & BNX2_FLAG_NO_WOL))
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 1, 0);
+ if (!(bp->flags & BNX2_FLAG_NO_WOL)) {
+ u32 val;
+
+ wol_msg |= BNX2_DRV_MSG_DATA_WAIT3;
+ if (bp->fw_last_msg || BNX2_CHIP(bp) != BNX2_CHIP_5709) {
+ bnx2_fw_sync(bp, wol_msg, 1, 0);
+ return;
+ }
+ /* Tell firmware not to power down the PHY yet, otherwise
+ * the chip will take a long time to respond to MMIO reads.
+ */
+ val = bnx2_shmem_rd(bp, BNX2_PORT_FEATURE);
+ bnx2_shmem_wr(bp, BNX2_PORT_FEATURE,
+ val | BNX2_PORT_FEATURE_ASF_ENABLED);
+ bnx2_fw_sync(bp, wol_msg, 1, 0);
+ bnx2_shmem_wr(bp, BNX2_PORT_FEATURE, val);
+ }
}
@@ -4033,9 +4049,22 @@ bnx2_set_power_state(struct bnx2 *bp, pci_power_t state)
if (bp->wol)
pci_set_power_state(bp->pdev, PCI_D3hot);
- } else {
- pci_set_power_state(bp->pdev, PCI_D3hot);
+ break;
+
+ }
+ if (!bp->fw_last_msg && BNX2_CHIP(bp) == BNX2_CHIP_5709) {
+ u32 val;
+
+ /* Tell firmware not to power down the PHY yet,
+ * otherwise the other port may not respond to
+ * MMIO reads.
+ */
+ val = bnx2_shmem_rd(bp, BNX2_BC_STATE_CONDITION);
+ val &= ~BNX2_CONDITION_PM_STATE_MASK;
+ val |= BNX2_CONDITION_PM_STATE_UNPREP;
+ bnx2_shmem_wr(bp, BNX2_BC_STATE_CONDITION, val);
}
+ pci_set_power_state(bp->pdev, PCI_D3hot);
/* No more memory access after this point until
* device is brought back to D0.