summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c28
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 0d3c00deb160..c597398f2922 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -317,8 +317,8 @@ static void e1000e_dump(struct e1000_adapter *adapter)
else
next_desc = "";
pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p%s\n",
- (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
- ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')),
+ (!(le64_to_cpu(u0->b) & BIT(29)) ? 'l' :
+ ((le64_to_cpu(u0->b) & BIT(20)) ? 'd' : 'c')),
i,
(unsigned long long)le64_to_cpu(u0->a),
(unsigned long long)le64_to_cpu(u0->b),
@@ -2018,7 +2018,7 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
adapter->eiac_mask |= E1000_IMS_OTHER;
/* Cause Tx interrupts on every write back */
- ivar |= (1 << 31);
+ ivar |= BIT(31);
ew32(IVAR, ivar);
@@ -2709,7 +2709,7 @@ static int e1000_vlan_rx_add_vid(struct net_device *netdev,
if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
index = (vid >> 5) & 0x7F;
vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
- vfta |= (1 << (vid & 0x1F));
+ vfta |= BIT((vid & 0x1F));
hw->mac.ops.write_vfta(hw, index, vfta);
}
@@ -2737,7 +2737,7 @@ static int e1000_vlan_rx_kill_vid(struct net_device *netdev,
if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
index = (vid >> 5) & 0x7F;
vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
- vfta &= ~(1 << (vid & 0x1F));
+ vfta &= ~BIT((vid & 0x1F));
hw->mac.ops.write_vfta(hw, index, vfta);
}
@@ -2878,7 +2878,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
/* Enable this decision filter in MANC2H */
if (mdef)
- manc2h |= (1 << i);
+ manc2h |= BIT(i);
j |= mdef;
}
@@ -2891,7 +2891,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
if (er32(MDEF(i)) == 0) {
ew32(MDEF(i), (E1000_MDEF_PORT_623 |
E1000_MDEF_PORT_664));
- manc2h |= (1 << 1);
+ manc2h |= BIT(1);
j++;
break;
}
@@ -2971,7 +2971,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
/* set the speed mode bit, we'll clear it if we're not at
* gigabit link later
*/
-#define SPEED_MODE_BIT (1 << 21)
+#define SPEED_MODE_BIT BIT(21)
tarc |= SPEED_MODE_BIT;
ew32(TARC(0), tarc);
}
@@ -3071,12 +3071,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
phy_data &= 0xfff8;
- phy_data |= (1 << 2);
+ phy_data |= BIT(2);
e1e_wphy(hw, PHY_REG(770, 26), phy_data);
e1e_rphy(hw, 22, &phy_data);
phy_data &= 0x0fff;
- phy_data |= (1 << 14);
+ phy_data |= BIT(14);
e1e_wphy(hw, 0x10, 0x2823);
e1e_wphy(hw, 0x11, 0x0003);
e1e_wphy(hw, 22, phy_data);
@@ -3503,8 +3503,8 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
!(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) {
u32 fextnvm7 = er32(FEXTNVM7);
- if (!(fextnvm7 & (1 << 0))) {
- ew32(FEXTNVM7, fextnvm7 | (1 << 0));
+ if (!(fextnvm7 & BIT(0))) {
+ ew32(FEXTNVM7, fextnvm7 | BIT(0));
e1e_flush();
}
}
@@ -3839,7 +3839,7 @@ static void e1000_flush_rx_ring(struct e1000_adapter *adapter)
/* update thresholds: prefetch threshold to 31, host threshold to 1
* and make sure the granularity is "descriptors" and not "cache lines"
*/
- rxdctl |= (0x1F | (1 << 8) | E1000_RXDCTL_THRESH_UNIT_DESC);
+ rxdctl |= (0x1F | BIT(8) | E1000_RXDCTL_THRESH_UNIT_DESC);
ew32(RXDCTL(0), rxdctl);
/* momentarily enable the RX ring for the changes to take effect */
@@ -6862,7 +6862,7 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter)
ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
le16_to_cpus(&buf);
- if (!ret_val && (!(buf & (1 << 0)))) {
+ if (!ret_val && (!(buf & BIT(0)))) {
/* Deep Smart Power Down (DSPD) */
dev_warn(&adapter->pdev->dev,
"Warning: detected DSPD enabled in EEPROM\n");