summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h')
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h449
1 files changed, 0 insertions, 449 deletions
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h b/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h
deleted file mode 100644
index c5ad0388c3d5..000000000000
--- a/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h
+++ /dev/null
@@ -1,449 +0,0 @@
-/*******************************************************************************
- *
- * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
- * Copyright(c) 2013 - 2014 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- * Contact Information:
- * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- ******************************************************************************/
-
-#ifndef _I40E_VIRTCHNL_H_
-#define _I40E_VIRTCHNL_H_
-
-#include "i40e_type.h"
-
-/* Description:
- * This header file describes the VF-PF communication protocol used
- * by the various i40e drivers.
- *
- * Admin queue buffer usage:
- * desc->opcode is always i40e_aqc_opc_send_msg_to_pf
- * flags, retval, datalen, and data addr are all used normally.
- * Firmware copies the cookie fields when sending messages between the PF and
- * VF, but uses all other fields internally. Due to this limitation, we
- * must send all messages as "indirect", i.e. using an external buffer.
- *
- * All the vsi indexes are relative to the VF. Each VF can have maximum of
- * three VSIs. All the queue indexes are relative to the VSI. Each VF can
- * have a maximum of sixteen queues for all of its VSIs.
- *
- * The PF is required to return a status code in v_retval for all messages
- * except RESET_VF, which does not require any response. The return value is of
- * i40e_status_code type, defined in the i40e_type.h.
- *
- * In general, VF driver initialization should roughly follow the order of these
- * opcodes. The VF driver must first validate the API version of the PF driver,
- * then request a reset, then get resources, then configure queues and
- * interrupts. After these operations are complete, the VF driver may start
- * its queues, optionally add MAC and VLAN filters, and process traffic.
- */
-
-/* Opcodes for VF-PF communication. These are placed in the v_opcode field
- * of the virtchnl_msg structure.
- */
-enum i40e_virtchnl_ops {
-/* The PF sends status change events to VFs using
- * the I40E_VIRTCHNL_OP_EVENT opcode.
- * VFs send requests to the PF using the other ops.
- */
- I40E_VIRTCHNL_OP_UNKNOWN = 0,
- I40E_VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
- I40E_VIRTCHNL_OP_RESET_VF = 2,
- I40E_VIRTCHNL_OP_GET_VF_RESOURCES = 3,
- I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
- I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
- I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
- I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
- I40E_VIRTCHNL_OP_ENABLE_QUEUES = 8,
- I40E_VIRTCHNL_OP_DISABLE_QUEUES = 9,
- I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS = 10,
- I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS = 11,
- I40E_VIRTCHNL_OP_ADD_VLAN = 12,
- I40E_VIRTCHNL_OP_DEL_VLAN = 13,
- I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
- I40E_VIRTCHNL_OP_GET_STATS = 15,
- I40E_VIRTCHNL_OP_FCOE = 16,
- I40E_VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */
- I40E_VIRTCHNL_OP_IWARP = 20,
- I40E_VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21,
- I40E_VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22,
- I40E_VIRTCHNL_OP_CONFIG_RSS_KEY = 23,
- I40E_VIRTCHNL_OP_CONFIG_RSS_LUT = 24,
- I40E_VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25,
- I40E_VIRTCHNL_OP_SET_RSS_HENA = 26,
-
-};
-
-/* Virtual channel message descriptor. This overlays the admin queue
- * descriptor. All other data is passed in external buffers.
- */
-
-struct i40e_virtchnl_msg {
- u8 pad[8]; /* AQ flags/opcode/len/retval fields */
- enum i40e_virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */
- i40e_status v_retval; /* ditto for desc->retval */
- u32 vfid; /* used by PF when sending to VF */
-};
-
-/* Message descriptions and data structures.*/
-
-/* I40E_VIRTCHNL_OP_VERSION
- * VF posts its version number to the PF. PF responds with its version number
- * in the same format, along with a return code.
- * Reply from PF has its major/minor versions also in param0 and param1.
- * If there is a major version mismatch, then the VF cannot operate.
- * If there is a minor version mismatch, then the VF can operate but should
- * add a warning to the system log.
- *
- * This enum element MUST always be specified as == 1, regardless of other
- * changes in the API. The PF must always respond to this message without
- * error regardless of version mismatch.
- */
-#define I40E_VIRTCHNL_VERSION_MAJOR 1
-#define I40E_VIRTCHNL_VERSION_MINOR 1
-#define I40E_VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0
-
-struct i40e_virtchnl_version_info {
- u32 major;
- u32 minor;
-};
-
-/* I40E_VIRTCHNL_OP_RESET_VF
- * VF sends this request to PF with no parameters
- * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register
- * until reset completion is indicated. The admin queue must be reinitialized
- * after this operation.
- *
- * When reset is complete, PF must ensure that all queues in all VSIs associated
- * with the VF are stopped, all queue configurations in the HMC are set to 0,
- * and all MAC and VLAN filters (except the default MAC address) on all VSIs
- * are cleared.
- */
-
-/* I40E_VIRTCHNL_OP_GET_VF_RESOURCES
- * Version 1.0 VF sends this request to PF with no parameters
- * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
- * PF responds with an indirect message containing
- * i40e_virtchnl_vf_resource and one or more
- * i40e_virtchnl_vsi_resource structures.
- */
-
-struct i40e_virtchnl_vsi_resource {
- u16 vsi_id;
- u16 num_queue_pairs;
- enum i40e_vsi_type vsi_type;
- u16 qset_handle;
- u8 default_mac_addr[ETH_ALEN];
-};
-/* VF offload flags */
-#define I40E_VIRTCHNL_VF_OFFLOAD_L2 0x00000001
-#define I40E_VIRTCHNL_VF_OFFLOAD_IWARP 0x00000002
-#define I40E_VIRTCHNL_VF_OFFLOAD_FCOE 0x00000004
-#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_AQ 0x00000008
-#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010
-#define I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020
-#define I40E_VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000
-#define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000
-#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
-#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF 0X00080000
-#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000
-#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000
-
-#define I40E_VF_BASE_MODE_OFFLOADS (I40E_VIRTCHNL_VF_OFFLOAD_L2 | \
- I40E_VIRTCHNL_VF_OFFLOAD_VLAN | \
- I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF)
-
-struct i40e_virtchnl_vf_resource {
- u16 num_vsis;
- u16 num_queue_pairs;
- u16 max_vectors;
- u16 max_mtu;
-
- u32 vf_offload_flags;
- u32 rss_key_size;
- u32 rss_lut_size;
-
- struct i40e_virtchnl_vsi_resource vsi_res[1];
-};
-
-/* I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE
- * VF sends this message to set up parameters for one TX queue.
- * External data buffer contains one instance of i40e_virtchnl_txq_info.
- * PF configures requested queue and returns a status code.
- */
-
-/* Tx queue config info */
-struct i40e_virtchnl_txq_info {
- u16 vsi_id;
- u16 queue_id;
- u16 ring_len; /* number of descriptors, multiple of 8 */
- u16 headwb_enabled;
- u64 dma_ring_addr;
- u64 dma_headwb_addr;
-};
-
-/* I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE
- * VF sends this message to set up parameters for one RX queue.
- * External data buffer contains one instance of i40e_virtchnl_rxq_info.
- * PF configures requested queue and returns a status code.
- */
-
-/* Rx queue config info */
-struct i40e_virtchnl_rxq_info {
- u16 vsi_id;
- u16 queue_id;
- u32 ring_len; /* number of descriptors, multiple of 32 */
- u16 hdr_size;
- u16 splithdr_enabled;
- u32 databuffer_size;
- u32 max_pkt_size;
- u64 dma_ring_addr;
- enum i40e_hmc_obj_rx_hsplit_0 rx_split_pos;
-};
-
-/* I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES
- * VF sends this message to set parameters for all active TX and RX queues
- * associated with the specified VSI.
- * PF configures queues and returns status.
- * If the number of queues specified is greater than the number of queues
- * associated with the VSI, an error is returned and no queues are configured.
- */
-struct i40e_virtchnl_queue_pair_info {
- /* NOTE: vsi_id and queue_id should be identical for both queues. */
- struct i40e_virtchnl_txq_info txq;
- struct i40e_virtchnl_rxq_info rxq;
-};
-
-struct i40e_virtchnl_vsi_queue_config_info {
- u16 vsi_id;
- u16 num_queue_pairs;
- struct i40e_virtchnl_queue_pair_info qpair[1];
-};
-
-/* I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP
- * VF uses this message to map vectors to queues.
- * The rxq_map and txq_map fields are bitmaps used to indicate which queues
- * are to be associated with the specified vector.
- * The "other" causes are always mapped to vector 0.
- * PF configures interrupt mapping and returns status.
- */
-struct i40e_virtchnl_vector_map {
- u16 vsi_id;
- u16 vector_id;
- u16 rxq_map;
- u16 txq_map;
- u16 rxitr_idx;
- u16 txitr_idx;
-};
-
-struct i40e_virtchnl_irq_map_info {
- u16 num_vectors;
- struct i40e_virtchnl_vector_map vecmap[1];
-};
-
-/* I40E_VIRTCHNL_OP_ENABLE_QUEUES
- * I40E_VIRTCHNL_OP_DISABLE_QUEUES
- * VF sends these message to enable or disable TX/RX queue pairs.
- * The queues fields are bitmaps indicating which queues to act upon.
- * (Currently, we only support 16 queues per VF, but we make the field
- * u32 to allow for expansion.)
- * PF performs requested action and returns status.
- */
-struct i40e_virtchnl_queue_select {
- u16 vsi_id;
- u16 pad;
- u32 rx_queues;
- u32 tx_queues;
-};
-
-/* I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS
- * VF sends this message in order to add one or more unicast or multicast
- * address filters for the specified VSI.
- * PF adds the filters and returns status.
- */
-
-/* I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS
- * VF sends this message in order to remove one or more unicast or multicast
- * filters for the specified VSI.
- * PF removes the filters and returns status.
- */
-
-struct i40e_virtchnl_ether_addr {
- u8 addr[ETH_ALEN];
- u8 pad[2];
-};
-
-struct i40e_virtchnl_ether_addr_list {
- u16 vsi_id;
- u16 num_elements;
- struct i40e_virtchnl_ether_addr list[1];
-};
-
-/* I40E_VIRTCHNL_OP_ADD_VLAN
- * VF sends this message to add one or more VLAN tag filters for receives.
- * PF adds the filters and returns status.
- * If a port VLAN is configured by the PF, this operation will return an
- * error to the VF.
- */
-
-/* I40E_VIRTCHNL_OP_DEL_VLAN
- * VF sends this message to remove one or more VLAN tag filters for receives.
- * PF removes the filters and returns status.
- * If a port VLAN is configured by the PF, this operation will return an
- * error to the VF.
- */
-
-struct i40e_virtchnl_vlan_filter_list {
- u16 vsi_id;
- u16 num_elements;
- u16 vlan_id[1];
-};
-
-/* I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
- * VF sends VSI id and flags.
- * PF returns status code in retval.
- * Note: we assume that broadcast accept mode is always enabled.
- */
-struct i40e_virtchnl_promisc_info {
- u16 vsi_id;
- u16 flags;
-};
-
-#define I40E_FLAG_VF_UNICAST_PROMISC 0x00000001
-#define I40E_FLAG_VF_MULTICAST_PROMISC 0x00000002
-
-/* I40E_VIRTCHNL_OP_GET_STATS
- * VF sends this message to request stats for the selected VSI. VF uses
- * the i40e_virtchnl_queue_select struct to specify the VSI. The queue_id
- * field is ignored by the PF.
- *
- * PF replies with struct i40e_eth_stats in an external buffer.
- */
-
-/* I40E_VIRTCHNL_OP_CONFIG_RSS_KEY
- * I40E_VIRTCHNL_OP_CONFIG_RSS_LUT
- * VF sends these messages to configure RSS. Only supported if both PF
- * and VF drivers set the I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF bit during
- * configuration negotiation. If this is the case, then the RSS fields in
- * the VF resource struct are valid.
- * Both the key and LUT are initialized to 0 by the PF, meaning that
- * RSS is effectively disabled until set up by the VF.
- */
-struct i40e_virtchnl_rss_key {
- u16 vsi_id;
- u16 key_len;
- u8 key[1]; /* RSS hash key, packed bytes */
-};
-
-struct i40e_virtchnl_rss_lut {
- u16 vsi_id;
- u16 lut_entries;
- u8 lut[1]; /* RSS lookup table*/
-};
-
-/* I40E_VIRTCHNL_OP_GET_RSS_HENA_CAPS
- * I40E_VIRTCHNL_OP_SET_RSS_HENA
- * VF sends these messages to get and set the hash filter enable bits for RSS.
- * By default, the PF sets these to all possible traffic types that the
- * hardware supports. The VF can query this value if it wants to change the
- * traffic types that are hashed by the hardware.
- * Traffic types are defined in the i40e_filter_pctype enum in i40e_type.h
- */
-struct i40e_virtchnl_rss_hena {
- u64 hena;
-};
-
-/* I40E_VIRTCHNL_OP_EVENT
- * PF sends this message to inform the VF driver of events that may affect it.
- * No direct response is expected from the VF, though it may generate other
- * messages in response to this one.
- */
-enum i40e_virtchnl_event_codes {
- I40E_VIRTCHNL_EVENT_UNKNOWN = 0,
- I40E_VIRTCHNL_EVENT_LINK_CHANGE,
- I40E_VIRTCHNL_EVENT_RESET_IMPENDING,
- I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
-};
-#define I40E_PF_EVENT_SEVERITY_INFO 0
-#define I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM 255
-
-struct i40e_virtchnl_pf_event {
- enum i40e_virtchnl_event_codes event;
- union {
- struct {
- enum i40e_aq_link_speed link_speed;
- bool link_status;
- } link_event;
- } event_data;
-
- int severity;
-};
-
-/* I40E_VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP
- * VF uses this message to request PF to map IWARP vectors to IWARP queues.
- * The request for this originates from the VF IWARP driver through
- * a client interface between VF LAN and VF IWARP driver.
- * A vector could have an AEQ and CEQ attached to it although
- * there is a single AEQ per VF IWARP instance in which case
- * most vectors will have an INVALID_IDX for aeq and valid idx for ceq.
- * There will never be a case where there will be multiple CEQs attached
- * to a single vector.
- * PF configures interrupt mapping and returns status.
- */
-
-/* HW does not define a type value for AEQ; only for RX/TX and CEQ.
- * In order for us to keep the interface simple, SW will define a
- * unique type value for AEQ.
- */
-#define I40E_QUEUE_TYPE_PE_AEQ 0x80
-#define I40E_QUEUE_INVALID_IDX 0xFFFF
-
-struct i40e_virtchnl_iwarp_qv_info {
- u32 v_idx; /* msix_vector */
- u16 ceq_idx;
- u16 aeq_idx;
- u8 itr_idx;
-};
-
-struct i40e_virtchnl_iwarp_qvlist_info {
- u32 num_vectors;
- struct i40e_virtchnl_iwarp_qv_info qv_info[1];
-};
-
-/* VF reset states - these are written into the RSTAT register:
- * I40E_VFGEN_RSTAT1 on the PF
- * I40E_VFGEN_RSTAT on the VF
- * When the PF initiates a reset, it writes 0
- * When the reset is complete, it writes 1
- * When the PF detects that the VF has recovered, it writes 2
- * VF checks this register periodically to determine if a reset has occurred,
- * then polls it to know when the reset is complete.
- * If either the PF or VF reads the register while the hardware
- * is in a reset state, it will return DEADBEEF, which, when masked
- * will result in 3.
- */
-enum i40e_vfr_states {
- I40E_VFR_INPROGRESS = 0,
- I40E_VFR_COMPLETED,
- I40E_VFR_VFACTIVE,
- I40E_VFR_UNKNOWN,
-};
-
-#endif /* _I40E_VIRTCHNL_H_ */