3 files changed, 34 insertions, 5 deletions

diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 4182290fdbcf..82f080a5ed5c 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2884,7 +2884,7 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 
 	ret = mv643xx_eth_shared_of_probe(pdev);
 	if (ret)
-		return ret;
+		goto err_put_clk;
 	pd = dev_get_platdata(&pdev->dev);
 
 	msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
@@ -2892,6 +2892,11 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 	infer_hw_params(msp);
 
 	return 0;
+
+err_put_clk:
+	if (!IS_ERR(msp->clk))
+		clk_disable_unprepare(msp->clk);
+	return ret;
 }
 
 static int mv643xx_eth_shared_remove(struct platform_device *pdev)
diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index 7173836fe361..c9f4b5412844 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -152,8 +152,10 @@ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	memset(p, 0, regs->len);
 	memcpy_fromio(p, io, B3_RAM_ADDR);
 
-	memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
-		      regs->len - B3_RI_WTO_R1);
+	if (regs->len > B3_RI_WTO_R1) {
+		memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
+			      regs->len - B3_RI_WTO_R1);
+	}
 }
 
 /* Wake on Lan only supported on Yukon chips with rev 1 or above */
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 6e5065f0907b..5cc05df69a86 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -46,6 +46,7 @@
 #include <linux/mii.h>
 #include <linux/of_device.h>
 #include <linux/of_net.h>
+#include <linux/dmi.h>
 
 #include <asm/irq.h>
 
@@ -93,7 +94,7 @@ static int copybreak __read_mostly = 128;
 module_param(copybreak, int, 0);
 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
 
-static int disable_msi = 0;
+static int disable_msi = -1;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
@@ -4923,6 +4924,24 @@ static const char *sky2_name(u8 chipid, char *buf, int sz)
 	return buf;
 }
 
+static const struct dmi_system_id msi_blacklist[] = {
+	{
+		.ident = "Dell Inspiron 1545",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1545"),
+		},
+	},
+	{
+		.ident = "Gateway P-79",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Gateway"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P-79"),
+		},
+	},
+	{}
+};
+
 static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *dev, *dev1;
@@ -5034,6 +5053,9 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_free_pci;
 	}
 
+	if (disable_msi == -1)
+		disable_msi = !!dmi_check_system(msi_blacklist);
+
 	if (!disable_msi && pci_enable_msi(pdev) == 0) {
 		err = sky2_test_msi(hw);
 		if (err) {
@@ -5079,7 +5101,7 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	INIT_WORK(&hw->restart_work, sky2_restart);
 
 	pci_set_drvdata(pdev, hw);
-	pdev->d3_delay = 200;
+	pdev->d3_delay = 300;
 
 	return 0;