diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlxsw/core_thermal.c')
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 52 |
1 files changed, 5 insertions, 47 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c index c3fc1cc4bb2b..882ea12098b7 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c @@ -25,16 +25,8 @@ #define MLXSW_THERMAL_ZONE_MAX_NAME 16 #define MLXSW_THERMAL_TEMP_SCORE_MAX GENMASK(31, 0) #define MLXSW_THERMAL_MAX_STATE 10 +#define MLXSW_THERMAL_MIN_STATE 2 #define MLXSW_THERMAL_MAX_DUTY 255 -/* Minimum and maximum fan allowed speed in percent: from 20% to 100%. Values - * MLXSW_THERMAL_MAX_STATE + x, where x is between 2 and 10 are used for - * setting fan speed dynamic minimum. For example, if value is set to 14 (40%) - * cooling levels vector will be set to 4, 4, 4, 4, 4, 5, 6, 7, 8, 9, 10 to - * introduce PWM speed in percent: 40, 40, 40, 40, 40, 50, 60. 70, 80, 90, 100. - */ -#define MLXSW_THERMAL_SPEED_MIN (MLXSW_THERMAL_MAX_STATE + 2) -#define MLXSW_THERMAL_SPEED_MAX (MLXSW_THERMAL_MAX_STATE * 2) -#define MLXSW_THERMAL_SPEED_MIN_LEVEL 2 /* 20% */ /* External cooling devices, allowed for binding to mlxsw thermal zones. */ static char * const mlxsw_thermal_external_allowed_cdev[] = { @@ -703,49 +695,16 @@ static int mlxsw_thermal_set_cur_state(struct thermal_cooling_device *cdev, struct mlxsw_thermal *thermal = cdev->devdata; struct device *dev = thermal->bus_info->dev; char mfsc_pl[MLXSW_REG_MFSC_LEN]; - unsigned long cur_state, i; int idx; - u8 duty; int err; + if (state > MLXSW_THERMAL_MAX_STATE) + return -EINVAL; + idx = mlxsw_get_cooling_device_idx(thermal, cdev); if (idx < 0) return idx; - /* Verify if this request is for changing allowed fan dynamical - * minimum. If it is - update cooling levels accordingly and update - * state, if current state is below the newly requested minimum state. - * For example, if current state is 5, and minimal state is to be - * changed from 4 to 6, thermal->cooling_levels[0 to 5] will be changed - * all from 4 to 6. And state 5 (thermal->cooling_levels[4]) should be - * overwritten. - */ - if (state >= MLXSW_THERMAL_SPEED_MIN && - state <= MLXSW_THERMAL_SPEED_MAX) { - state -= MLXSW_THERMAL_MAX_STATE; - for (i = 0; i <= MLXSW_THERMAL_MAX_STATE; i++) - thermal->cooling_levels[i] = max(state, i); - - mlxsw_reg_mfsc_pack(mfsc_pl, idx, 0); - err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfsc), mfsc_pl); - if (err) - return err; - - duty = mlxsw_reg_mfsc_pwm_duty_cycle_get(mfsc_pl); - cur_state = mlxsw_duty_to_state(duty); - - /* If current fan state is lower than requested dynamical - * minimum, increase fan speed up to dynamical minimum. - */ - if (state < cur_state) - return 0; - - state = cur_state; - } - - if (state > MLXSW_THERMAL_MAX_STATE) - return -EINVAL; - /* Normalize the state to the valid speed range. */ state = thermal->cooling_levels[state]; mlxsw_reg_mfsc_pack(mfsc_pl, idx, mlxsw_state_to_duty(state)); @@ -1040,8 +999,7 @@ int mlxsw_thermal_init(struct mlxsw_core *core, /* Initialize cooling levels per PWM state. */ for (i = 0; i < MLXSW_THERMAL_MAX_STATE; i++) - thermal->cooling_levels[i] = max(MLXSW_THERMAL_SPEED_MIN_LEVEL, - i); + thermal->cooling_levels[i] = max(MLXSW_THERMAL_MIN_STATE, i); thermal->polling_delay = bus_info->low_frequency ? MLXSW_THERMAL_SLOW_POLL_INT : |