summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/smsc/smc9194.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/smsc/smc9194.c')
-rw-r--r--drivers/net/ethernet/smsc/smc9194.c24
1 files changed, 0 insertions, 24 deletions
diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index e85c2e7e8246..afd9873e9bdb 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -95,14 +95,6 @@ static const char version[] =
#define USE_32_BIT 1
#endif
-#if defined(__H8300H__) || defined(__H8300S__)
-#define NO_AUTOPROBE
-#undef insl
-#undef outsl
-#define insl(a,b,l) io_insl_noswap(a,b,l)
-#define outsl(a,b,l) io_outsl_noswap(a,b,l)
-#endif
-
/*
.the SMC9194 can be at any of the following port addresses. To change,
.for a slightly different card, you can add it to the array. Keep in
@@ -114,12 +106,6 @@ struct devlist {
unsigned int irq;
};
-#if defined(CONFIG_H8S_EDOSK2674)
-static struct devlist smc_devlist[] __initdata = {
- {.port = 0xf80000, .irq = 16},
- {.port = 0, .irq = 0 },
-};
-#else
static struct devlist smc_devlist[] __initdata = {
{.port = 0x200, .irq = 0},
{.port = 0x220, .irq = 0},
@@ -139,7 +125,6 @@ static struct devlist smc_devlist[] __initdata = {
{.port = 0x3E0, .irq = 0},
{.port = 0, .irq = 0},
};
-#endif
/*
. Wait time for memory to be free. This probably shouldn't be
. tuned that much, as waiting for this means nothing else happens
@@ -651,11 +636,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
#ifdef USE_32_BIT
if ( length & 0x2 ) {
outsl(ioaddr + DATA_1, buf, length >> 2 );
-#if !defined(__H8300H__) && !defined(__H8300S__)
outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
-#else
- ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
-#endif
}
else
outsl(ioaddr + DATA_1, buf, length >> 2 );
@@ -899,7 +880,6 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
retval = -ENODEV;
goto err_out;
}
-#if !defined(CONFIG_H8S_EDOSK2674)
/* well, we've already written once, so hopefully another time won't
hurt. This time, I need to switch the bank register to bank 1,
so I can access the base address register */
@@ -914,10 +894,6 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
retval = -ENODEV;
goto err_out;
}
-#else
- (void)base_address_register; /* Warning suppression */
-#endif
-
/* check if the revision register is something that I recognize.
These might need to be added to later, as future revisions