diff options
Diffstat (limited to 'drivers/net/irda')
| -rw-r--r-- | drivers/net/irda/ali-ircc.c | 4 | ||||
| -rw-r--r-- | drivers/net/irda/donauboe.c | 2 | ||||
| -rw-r--r-- | drivers/net/irda/donauboe.h | 2 | ||||
| -rw-r--r-- | drivers/net/irda/girbil-sir.c | 2 | ||||
| -rw-r--r-- | drivers/net/irda/irda-usb.c | 4 | ||||
| -rw-r--r-- | drivers/net/irda/mcs7780.c | 6 | ||||
| -rw-r--r-- | drivers/net/irda/nsc-ircc.c | 2 | ||||
| -rw-r--r-- | drivers/net/irda/nsc-ircc.h | 2 | ||||
| -rw-r--r-- | drivers/net/irda/pxaficp_ir.c | 4 | ||||
| -rw-r--r-- | drivers/net/irda/smsc-ircc2.c | 2 | ||||
| -rw-r--r-- | drivers/net/irda/via-ircc.c | 98 | ||||
| -rw-r--r-- | drivers/net/irda/vlsi_ir.h | 4 |
12 files changed, 40 insertions, 92 deletions
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 92631eb6f6a3..872183f29ec4 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -76,7 +76,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info); static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info); static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info); -/* These are the currently known ALi sourth-bridge chipsets, the only one difference +/* These are the currently known ALi south-bridge chipsets, the only one difference * is that M1543C doesn't support HP HDSL-3600 */ static ali_chip_t chips[] = @@ -1108,7 +1108,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) outb(lcr, iobase+UART_LCR); /* Set 8N1 */ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */ - /* without this, the conection will be broken after come back from FIR speed, + /* without this, the connection will be broken after come back from FIR speed, but with this, the SIR connection is harder to established */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index f81d944fc360..174cafad2c1a 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -56,7 +56,7 @@ /* do_probe module parameter Enable this code */ /* Probe code is very useful for understanding how the hardware works */ /* Use it with various combinations of TT_LEN, RX_LEN */ -/* Strongly recomended, disable if the probe fails on your machine */ +/* Strongly recommended, disable if the probe fails on your machine */ /* and send me <james@fishsoup.dhs.org> the output of dmesg */ #define USE_PROBE 1 #undef USE_PROBE diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h index 77fcf4459161..d92d54e839b9 100644 --- a/drivers/net/irda/donauboe.h +++ b/drivers/net/irda/donauboe.h @@ -51,7 +51,7 @@ /* The documentation for this chip is allegedly released */ /* However I have not seen it, not have I managed to contact */ -/* anyone who has. HOWEVER the chip bears a striking resemblence */ +/* anyone who has. HOWEVER the chip bears a striking resemblance */ /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ /* the documentation for this is freely available at */ /* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c index a31b8fa8aaa9..96cdecff349d 100644 --- a/drivers/net/irda/girbil-sir.c +++ b/drivers/net/irda/girbil-sir.c @@ -38,7 +38,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed); /* Control register 1 */ #define GIRBIL_TXEN 0x01 /* Enable transmitter */ #define GIRBIL_RXEN 0x02 /* Enable receiver */ -#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */ +#define GIRBIL_ECAN 0x04 /* Cancel self emitted data */ #define GIRBIL_ECHO 0x08 /* Echo control characters */ /* LED Current Register (0x2) */ diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index e4ea61944c22..d9267cb98a23 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -370,7 +370,7 @@ static void speed_bulk_callback(struct urb *urb) /* urb is now available */ //urb->status = 0; -> tested above - /* New speed and xbof is now commited in hardware */ + /* New speed and xbof is now committed in hardware */ self->new_speed = -1; self->new_xbofs = -1; @@ -602,7 +602,7 @@ static void write_bulk_callback(struct urb *urb) IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__); irda_usb_change_speed_xbofs(self); } else { - /* New speed and xbof is now commited in hardware */ + /* New speed and xbof is now committed in hardware */ self->new_speed = -1; self->new_xbofs = -1; /* Done, waiting for next packet */ diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c index cc821de2c966..be52bfed66a9 100644 --- a/drivers/net/irda/mcs7780.c +++ b/drivers/net/irda/mcs7780.c @@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs) mcs_get_reg(mcs, MCS_MODE_REG, &rval); - /* MINRXPW values recomended by MosChip */ + /* MINRXPW values recommended by MosChip */ if (mcs->new_speed <= 115200) { rval &= ~MCS_FIR; @@ -799,7 +799,7 @@ static void mcs_receive_irq(struct urb *urb) ret = usb_submit_urb(urb, GFP_ATOMIC); } -/* Transmit callback funtion. */ +/* Transmit callback function. */ static void mcs_send_irq(struct urb *urb) { struct mcs_cb *mcs = urb->context; @@ -811,7 +811,7 @@ static void mcs_send_irq(struct urb *urb) netif_wake_queue(ndev); } -/* Transmit callback funtion. */ +/* Transmit callback function. */ static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev) { diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index 559fe854d76d..7a963d4e6d06 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -716,7 +716,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info) int reg, com = 0; int pnp; - /* Read funtion enable register (FER) */ + /* Read function enable register (FER) */ outb(CFG_338_FER, cfg_base); reg = inb(cfg_base+1); diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h index 7ba7738759b9..32fa58211fad 100644 --- a/drivers/net/irda/nsc-ircc.h +++ b/drivers/net/irda/nsc-ircc.h @@ -135,7 +135,7 @@ #define LSR_TXRDY 0x20 /* Transmitter ready */ #define LSR_TXEMP 0x40 /* Transmitter empty */ -#define ASCR 0x07 /* Auxillary Status and Control Register */ +#define ASCR 0x07 /* Auxiliary Status and Control Register */ #define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */ #define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */ #define ASCR_S_EOT 0x04 /* Set end of transmission */ diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index c192c31e4c5c..001ed0a255f6 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -40,7 +40,7 @@ #define ICCR0_AME (1 << 7) /* Address match enable */ #define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ -#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ +#define ICCR0_RIE (1 << 5) /* Receive FIFO interrupt enable */ #define ICCR0_RXE (1 << 4) /* Receive enable */ #define ICCR0_TXE (1 << 3) /* Transmit enable */ #define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ @@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id) } if (icsr0 & ICSR0_EIF) { - /* An error in FIFO occured, or there is a end of frame */ + /* An error in FIFO occurred, or there is a end of frame */ pxa_irda_fir_irq_eif(si, dev, icsr0); } diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 1c1677cfea29..8800e1fe4129 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -1582,7 +1582,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) int iobase; int iir, lsr; - /* Already locked comming here in smsc_ircc_interrupt() */ + /* Already locked coming here in smsc_ircc_interrupt() */ /*spin_lock(&self->lock);*/ iobase = self->io.sir_base; diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 67c0ad42d818..f504b262ba36 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -29,7 +29,7 @@ F02 Oct/28/02: Add SB device ID for 3147 and 3177. 2004-02-16: <sda@bdit.de> - Removed unneeded 'legacy' pci stuff. -- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff. +- Make sure SIR mode is set (hw_init()) before calling mode-dependent stuff. - On speed change from core, don't send SIR frame with new speed. Use current speed and change speeds later. - Make module-param dongle_id actually work. @@ -75,15 +75,9 @@ static int dongle_id = 0; /* default: probe */ /* We can't guess the type of connected dongle, user *must* supply it. */ module_param(dongle_id, int, 0); -/* FIXME : we should not need this, because instances should be automatically - * managed by the PCI layer. Especially that we seem to only be using the - * first entry. Jean II */ -/* Max 4 instances for now */ -static struct via_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL }; - /* Some prototypes */ -static int via_ircc_open(int i, chipio_t * info, unsigned int id); -static int via_ircc_close(struct via_ircc_cb *self); +static int via_ircc_open(struct pci_dev *pdev, chipio_t * info, + unsigned int id); static int via_ircc_dma_receive(struct via_ircc_cb *self); static int via_ircc_dma_receive_complete(struct via_ircc_cb *self, int iobase); @@ -215,7 +209,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi pci_write_config_byte(pcidev,0x42,(bTmp | 0xf0)); pci_write_config_byte(pcidev,0x5a,0xc0); WriteLPCReg(0x28, 0x70 ); - if (via_ircc_open(0, &info,0x3076) == 0) + if (via_ircc_open(pcidev, &info, 0x3076) == 0) rc=0; } else rc = -ENODEV; //IR not turn on @@ -254,7 +248,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi info.irq=FirIRQ; info.dma=FirDRQ1; info.dma2=FirDRQ0; - if (via_ircc_open(0, &info,0x3096) == 0) + if (via_ircc_open(pcidev, &info, 0x3096) == 0) rc=0; } else rc = -ENODEV; //IR not turn on !!!!! @@ -264,48 +258,10 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi return rc; } -/* - * Function via_ircc_clean () - * - * Close all configured chips - * - */ -static void via_ircc_clean(void) -{ - int i; - - IRDA_DEBUG(3, "%s()\n", __func__); - - for (i=0; i < ARRAY_SIZE(dev_self); i++) { - if (dev_self[i]) - via_ircc_close(dev_self[i]); - } -} - -static void __devexit via_remove_one (struct pci_dev *pdev) -{ - IRDA_DEBUG(3, "%s()\n", __func__); - - /* FIXME : This is ugly. We should use pci_get_drvdata(pdev); - * to get our driver instance and call directly via_ircc_close(). - * See vlsi_ir for details... - * Jean II */ - via_ircc_clean(); - - /* FIXME : This should be in via_ircc_close(), because here we may - * theoritically disable still configured devices :-( - Jean II */ - pci_disable_device(pdev); -} - static void __exit via_ircc_cleanup(void) { IRDA_DEBUG(3, "%s()\n", __func__); - /* FIXME : This should be redundant, as pci_unregister_driver() - * should call via_remove_one() on each device. - * Jean II */ - via_ircc_clean(); - /* Cleanup all instances of the driver */ pci_unregister_driver (&via_driver); } @@ -324,12 +280,13 @@ static const struct net_device_ops via_ircc_fir_ops = { }; /* - * Function via_ircc_open (iobase, irq) + * Function via_ircc_open(pdev, iobase, irq) * * Open driver instance * */ -static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) +static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info, + unsigned int id) { struct net_device *dev; struct via_ircc_cb *self; @@ -337,9 +294,6 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) IRDA_DEBUG(3, "%s()\n", __func__); - if (i >= ARRAY_SIZE(dev_self)) - return -ENOMEM; - /* Allocate new instance of the driver */ dev = alloc_irdadev(sizeof(struct via_ircc_cb)); if (dev == NULL) @@ -349,13 +303,8 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) self->netdev = dev; spin_lock_init(&self->lock); - /* FIXME : We should store our driver instance in the PCI layer, - * using pci_set_drvdata(), not in this array. - * See vlsi_ir for details... - Jean II */ - /* FIXME : 'i' is always 0 (see via_init_one()) :-( - Jean II */ - /* Need to store self somewhere */ - dev_self[i] = self; - self->index = i; + pci_set_drvdata(pdev, self); + /* Initialize Resource */ self->io.cfg_base = info->cfg_base; self->io.fir_base = info->fir_base; @@ -385,7 +334,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) self->io.dongle_id = dongle_id; /* The only value we must override it the baudrate */ - /* Maximum speeds and capabilities are dongle-dependant. */ + /* Maximum speeds and capabilities are dongle-dependent. */ switch( self->io.dongle_id ){ case 0x0d: self->qos.baud_rate.bits = @@ -414,7 +363,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) /* Allocate memory if needed */ self->rx_buff.head = - dma_alloc_coherent(NULL, self->rx_buff.truesize, + dma_alloc_coherent(&pdev->dev, self->rx_buff.truesize, &self->rx_buff_dma, GFP_KERNEL); if (self->rx_buff.head == NULL) { err = -ENOMEM; @@ -423,7 +372,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) memset(self->rx_buff.head, 0, self->rx_buff.truesize); self->tx_buff.head = - dma_alloc_coherent(NULL, self->tx_buff.truesize, + dma_alloc_coherent(&pdev->dev, self->tx_buff.truesize, &self->tx_buff_dma, GFP_KERNEL); if (self->tx_buff.head == NULL) { err = -ENOMEM; @@ -455,33 +404,32 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) via_hw_init(self); return 0; err_out4: - dma_free_coherent(NULL, self->tx_buff.truesize, + dma_free_coherent(&pdev->dev, self->tx_buff.truesize, self->tx_buff.head, self->tx_buff_dma); err_out3: - dma_free_coherent(NULL, self->rx_buff.truesize, + dma_free_coherent(&pdev->dev, self->rx_buff.truesize, self->rx_buff.head, self->rx_buff_dma); err_out2: release_region(self->io.fir_base, self->io.fir_ext); err_out1: + pci_set_drvdata(pdev, NULL); free_netdev(dev); - dev_self[i] = NULL; return err; } /* - * Function via_ircc_close (self) + * Function via_remove_one(pdev) * * Close driver instance * */ -static int via_ircc_close(struct via_ircc_cb *self) +static void __devexit via_remove_one(struct pci_dev *pdev) { + struct via_ircc_cb *self = pci_get_drvdata(pdev); int iobase; IRDA_DEBUG(3, "%s()\n", __func__); - IRDA_ASSERT(self != NULL, return -1;); - iobase = self->io.fir_base; ResetChip(iobase, 5); //hardware reset. @@ -493,16 +441,16 @@ static int via_ircc_close(struct via_ircc_cb *self) __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) - dma_free_coherent(NULL, self->tx_buff.truesize, + dma_free_coherent(&pdev->dev, self->tx_buff.truesize, self->tx_buff.head, self->tx_buff_dma); if (self->rx_buff.head) - dma_free_coherent(NULL, self->rx_buff.truesize, + dma_free_coherent(&pdev->dev, self->rx_buff.truesize, self->rx_buff.head, self->rx_buff_dma); - dev_self[self->index] = NULL; + pci_set_drvdata(pdev, NULL); free_netdev(self->netdev); - return 0; + pci_disable_device(pdev); } /* diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h index d66fab854bf1..a076eb125349 100644 --- a/drivers/net/irda/vlsi_ir.h +++ b/drivers/net/irda/vlsi_ir.h @@ -209,7 +209,7 @@ enum vlsi_pio_irintr { IRINTR_ACTEN = 0x80, /* activity interrupt enable */ IRINTR_ACTIVITY = 0x40, /* activity monitor (traffic detected) */ IRINTR_RPKTEN = 0x20, /* receive packet interrupt enable*/ - IRINTR_RPKTINT = 0x10, /* rx-packet transfered from fifo to memory finished */ + IRINTR_RPKTINT = 0x10, /* rx-packet transferred from fifo to memory finished */ IRINTR_TPKTEN = 0x08, /* transmit packet interrupt enable */ IRINTR_TPKTINT = 0x04, /* last bit of tx-packet+crc shifted to ir-pulser */ IRINTR_OE_EN = 0x02, /* UART rx fifo overrun error interrupt enable */ @@ -739,7 +739,7 @@ typedef struct vlsi_irda_dev { /* the remapped error flags we use for returning from frame * post-processing in vlsi_process_tx/rx() after it was completed * by the hardware. These functions either return the >=0 number - * of transfered bytes in case of success or the negative (-) + * of transferred bytes in case of success or the negative (-) * of the or'ed error flags. */ |