summaryrefslogtreecommitdiff
path: root/drivers/net/ixp2000/ixp2400-msf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixp2000/ixp2400-msf.c')
-rw-r--r--drivers/net/ixp2000/ixp2400-msf.c213
1 files changed, 213 insertions, 0 deletions
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c
new file mode 100644
index 000000000000..48a3a891d3a4
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400-msf.c
@@ -0,0 +1,213 @@
+/*
+ * Generic library functions for the MSF (Media and Switch Fabric) unit
+ * found on the Intel IXP2400 network processor.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/arch/ixp2000-regs.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include "ixp2400-msf.h"
+
+/*
+ * This is the Intel recommended PLL init procedure as described on
+ * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual.
+ */
+static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp)
+{
+ int rx_dual_clock;
+ int tx_dual_clock;
+ u32 value;
+
+ /*
+ * If the RX mode is not 1x32, we have to enable both RX PLLs
+ * (#0 and #1.) The same thing for the TX direction.
+ */
+ rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK);
+ tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK);
+
+ /*
+ * Read initial value.
+ */
+ value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL);
+
+ /*
+ * Put PLLs in powerdown and bypass mode.
+ */
+ value |= 0x0000f0f0;
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Set single or dual clock mode bits.
+ */
+ value &= ~0x03000000;
+ value |= (rx_dual_clock << 24) | (tx_dual_clock << 25);
+
+ /*
+ * Set multipliers.
+ */
+ value &= ~0x00ff0000;
+ value |= mp->rxclk01_multiplier << 16;
+ value |= mp->rxclk23_multiplier << 18;
+ value |= mp->txclk01_multiplier << 20;
+ value |= mp->txclk23_multiplier << 22;
+
+ /*
+ * And write value.
+ */
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Disable PLL bypass mode.
+ */
+ value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15);
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Turn on PLLs.
+ */
+ value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7);
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Wait for PLLs to lock. There are lock status bits, but IXP2400
+ * erratum #65 says that these lock bits should not be relied upon
+ * as they might not accurately reflect the true state of the PLLs.
+ */
+ udelay(100);
+}
+
+/*
+ * Needed according to p480 of Programmer's Reference Manual.
+ */
+static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp)
+{
+ int size_bits;
+ int i;
+
+ /*
+ * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer
+ * corruption) in the Intel-recommended way: do not add the RBUF
+ * elements susceptible to corruption to the freelist.
+ */
+ size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK;
+ if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) {
+ for (i = 1; i < 128; i++) {
+ if (i == 9 || i == 18 || i == 27)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) {
+ for (i = 1; i < 64; i++) {
+ if (i == 4 || i == 9 || i == 13)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) {
+ for (i = 1; i < 32; i++) {
+ if (i == 2 || i == 4 || i == 6)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ }
+}
+
+static u32 ixp2400_msf_valid_channels(u32 reg)
+{
+ u32 channels;
+
+ channels = 0;
+ switch (reg & IXP2400_RX_MODE_WIDTH_MASK) {
+ case IXP2400_RX_MODE_1x32:
+ channels = 0x1;
+ if (reg & IXP2400_RX_MODE_MPHY &&
+ !(reg & IXP2400_RX_MODE_MPHY_32))
+ channels = 0xf;
+ break;
+
+ case IXP2400_RX_MODE_2x16:
+ channels = 0x5;
+ break;
+
+ case IXP2400_RX_MODE_4x8:
+ channels = 0xf;
+ break;
+
+ case IXP2400_RX_MODE_1x16_2x8:
+ channels = 0xd;
+ break;
+ }
+
+ return channels;
+}
+
+static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+
+ value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff;
+ value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28;
+ ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value);
+}
+
+static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+
+ value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff;
+ value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28;
+ ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value);
+}
+
+
+void ixp2400_msf_init(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+ int i;
+
+ /*
+ * Init the RX/TX PLLs based on the passed parameter block.
+ */
+ ixp2400_pll_init(mp);
+
+ /*
+ * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF.
+ */
+ value = ixp2000_reg_read(IXP2000_RESET0);
+ ixp2000_reg_write(IXP2000_RESET0, value | 0x80);
+ ixp2000_reg_write(IXP2000_RESET0, value & ~0x80);
+
+ /*
+ * Initialise the RX section.
+ */
+ ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1);
+ ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode);
+ for (i = 0; i < 4; i++) {
+ ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i,
+ mp->rx_channel_mode[i]);
+ }
+ ixp2400_msf_free_rbuf_entries(mp);
+ ixp2400_msf_enable_rx(mp);
+
+ /*
+ * Initialise the TX section.
+ */
+ ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1);
+ ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode);
+ for (i = 0; i < 4; i++) {
+ ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i,
+ mp->tx_channel_mode[i]);
+ }
+ ixp2400_msf_enable_tx(mp);
+}